diff options
Diffstat (limited to 'drivers/net/phy/micrel.c')
| -rw-r--r-- | drivers/net/phy/micrel.c | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 1a6048a8c29d..bf72365e90bc 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -224,7 +224,7 @@ static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val) rc = phy_write(phydev, reg, temp); out: if (rc < 0) - dev_err(&phydev->dev, "failed to set led mode\n"); + phydev_err(phydev, "failed to set led mode\n"); return rc; } @@ -243,7 +243,7 @@ static int kszphy_broadcast_disable(struct phy_device *phydev) ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF); out: if (ret) - dev_err(&phydev->dev, "failed to disable broadcast address\n"); + phydev_err(phydev, "failed to disable broadcast address\n"); return ret; } @@ -263,7 +263,7 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev) ret & ~KSZPHY_OMSO_NAND_TREE_ON); out: if (ret) - dev_err(&phydev->dev, "failed to disable NAND tree mode\n"); + phydev_err(phydev, "failed to disable NAND tree mode\n"); return ret; } @@ -288,7 +288,8 @@ static int kszphy_config_init(struct phy_device *phydev) if (priv->rmii_ref_clk_sel) { ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val); if (ret) { - dev_err(&phydev->dev, "failed to set rmii reference clock\n"); + phydev_err(phydev, + "failed to set rmii reference clock\n"); return ret; } } @@ -649,8 +650,8 @@ static int kszphy_probe(struct phy_device *phydev) priv->led_mode = -1; if (priv->led_mode > 3) { - dev_err(&phydev->dev, "invalid led mode: 0x%02x\n", - priv->led_mode); + phydev_err(phydev, "invalid led mode: 0x%02x\n", + priv->led_mode); priv->led_mode = -1; } } else { @@ -672,7 +673,8 @@ static int kszphy_probe(struct phy_device *phydev) } else if (rate > 49500000 && rate < 50500000) { priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz; } else { - dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate); + phydev_err(phydev, "Clock rate out of range: %ld\n", + rate); return -EINVAL; } } |