diff options
Diffstat (limited to 'drivers/net/ethernet')
98 files changed, 110858 insertions, 0 deletions
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 69d6403ec4bd..a2fd38562cb3 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -16,5 +16,6 @@ source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" +source "drivers/net/ethernet/intel/Kconfig" endif # ETHERNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 470e5d843013..526527177d13 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_NET_VENDOR_8390) += 8390/ obj-$(CONFIG_NET_VENDOR_AMD) += amd/ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ +obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig new file mode 100644 index 000000000000..5fe185ba07bc --- /dev/null +++ b/drivers/net/ethernet/intel/Kconfig @@ -0,0 +1,220 @@ +# +# Intel network device configuration +# + +config NET_VENDOR_INTEL + bool "Intel devices" + depends on PCI || PCI_MSI + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Intel cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_INTEL + +config E100 + tristate "Intel(R) PRO/100+ support" + depends on PCI + select MII + ---help--- + This driver supports Intel(R) PRO/100 family of adapters. + To verify that your adapter is supported, find the board ID number + on the adapter. Look for a label that has a barcode and a number + in the format 123456-001 (six digits hyphen three digits). + + Use the above information and the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + to identify the adapter. + + For the latest Intel PRO/100 network driver for Linux, see: + + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> + + More specific information on configuring the driver is in + <file:Documentation/networking/e100.txt>. + + To compile this driver as a module, choose M here. The module + will be called e100. + +config E1000 + tristate "Intel(R) PRO/1000 Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) PRO/1000 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called e1000. + +config E1000E + tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support" + depends on PCI && (!SPARC32 || BROKEN) + select CRC32 + ---help--- + This driver supports the PCI-Express Intel(R) PRO/1000 gigabit + ethernet family of adapters. For PCI or PCI-X e1000 adapters, + use the regular e1000 driver For more information on how to + identify your adapter, go to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + To compile this driver as a module, choose M here. The module + will be called e1000e. + +config IGB + tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82575/82576 gigabit ethernet family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called igb. + +config IGB_DCA + bool "Direct Cache Access (DCA) Support" + default y + depends on IGB && DCA && !(IGB=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. + +config IGBVF + tristate "Intel(R) 82576 Virtual Function Ethernet support" + depends on PCI + ---help--- + This driver supports Intel(R) 82576 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/e1000.txt>. + + To compile this driver as a module, choose M here. The module + will be called igbvf. + +config IXGB + tristate "Intel(R) PRO/10GbE support" + depends on PCI + ---help--- + This driver supports Intel(R) PRO/10GbE family of adapters for + PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver + instead. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgb.txt>. + + To compile this driver as a module, choose M here. The module + will be called ixgb. + +config IXGBE + tristate "Intel(R) 10GbE PCI Express adapters support" + depends on PCI && INET + select MDIO + ---help--- + This driver supports Intel(R) 10GbE PCI Express family of + adapters. For more information on how to identify your adapter, go + to the Adapter & Driver ID Guide at: + + <http://support.intel.com/support/network/adapter/pro100/21397.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + To compile this driver as a module, choose M here. The module + will be called ixgbe. + +config IXGBE_DCA + bool "Direct Cache Access (DCA) Support" + default y + depends on IXGBE && DCA && !(IXGBE=y && DCA=m) + ---help--- + Say Y here if you want to use Direct Cache Access (DCA) in the + driver. DCA is a method for warming the CPU cache before data + is used, with the intent of lessening the impact of cache misses. + +config IXGBE_DCB + bool "Data Center Bridging (DCB) Support" + default n + depends on IXGBE && DCB + ---help--- + Say Y here if you want to use Data Center Bridging (DCB) in the + driver. + + If unsure, say N. + +config IXGBEVF + tristate "Intel(R) 82599 Virtual Function Ethernet support" + depends on PCI_MSI + ---help--- + This driver supports Intel(R) 82599 virtual functions. For more + information on how to identify your adapter, go to the Adapter & + Driver ID Guide at: + + <http://support.intel.com/support/network/sb/CS-008441.htm> + + For general information and support, go to the Intel support + website at: + + <http://support.intel.com> + + More specific information on configuring the driver is in + <file:Documentation/networking/ixgbevf.txt>. + + To compile this driver as a module, choose M here. The module + will be called ixgbevf. MSI-X interrupt support is required + for this driver to work correctly. + +endif # NET_VENDOR_INTEL diff --git a/drivers/net/ethernet/intel/Makefile b/drivers/net/ethernet/intel/Makefile new file mode 100644 index 000000000000..c8210e688669 --- /dev/null +++ b/drivers/net/ethernet/intel/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the Intel network device drivers. +# + +obj-$(CONFIG_E100) += e100.o +obj-$(CONFIG_E1000) += e1000/ +obj-$(CONFIG_E1000E) += e1000e/ +obj-$(CONFIG_IGB) += igb/ +obj-$(CONFIG_IGBVF) += igbvf/ +obj-$(CONFIG_IXGBE) += ixgbe/ +obj-$(CONFIG_IXGBEVF) += ixgbevf/ +obj-$(CONFIG_IXGB) += ixgb/ diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c new file mode 100644 index 000000000000..c1352c60c299 --- /dev/null +++ b/drivers/net/ethernet/intel/e100.c @@ -0,0 +1,3109 @@ +/******************************************************************************* + + Intel PRO/100 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |