diff options
Diffstat (limited to 'drivers/net/ethernet/mscc')
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot.c | 62 | ||||
-rw-r--r-- | drivers/net/ethernet/mscc/ocelot_board.c | 7 |
2 files changed, 39 insertions, 30 deletions
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index ac4cf34d3af5..06f9d013f807 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -1413,7 +1413,7 @@ void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state) * a source for the other ports. */ for (p = 0; p < ocelot->num_phys_ports; p++) { - if (p == ocelot->cpu || (ocelot->bridge_fwd_mask & BIT(p))) { + if (ocelot->bridge_fwd_mask & BIT(p)) { unsigned long mask = ocelot->bridge_fwd_mask & ~BIT(p); for (i = 0; i < ocelot->num_phys_ports; i++) { @@ -1428,18 +1428,10 @@ void ocelot_bridge_stp_state_set(struct ocelot *ocelot, int port, u8 state) } } - /* Avoid the NPI port from looping back to itself */ - if (p != ocelot->cpu) - mask |= BIT(ocelot->cpu); - ocelot_write_rix(ocelot, mask, ANA_PGID_PGID, PGID_SRC + p); } else { - /* Only the CPU port, this is compatible with link - * aggregation. - */ - ocelot_write_rix(ocelot, - BIT(ocelot->cpu), + ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, PGID_SRC + p); } } @@ -2308,27 +2300,34 @@ int ocelot_probe_port(struct ocelot *ocelot, u8 port, } EXPORT_SYMBOL(ocelot_probe_port); -void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu, - enum ocelot_tag_prefix injection, - enum ocelot_tag_prefix extraction) +/* Configure and enable the CPU port module, which is a set of queues. + * If @npi contains a valid port index, the CPU port module is connected + * to the Node Processor Interface (NPI). This is the mode through which + * frames can be injected from and extracted to an external CPU, + * over Ethernet. + */ +void ocelot_configure_cpu(struct ocelot *ocelot, int npi, + enum ocelot_tag_prefix injection, + enum ocelot_tag_prefix extraction) { - /* Configure and enable the CPU port. */ + int cpu = ocelot->num_phys_ports; + + /* The unicast destination PGID for the CPU port module is unused */ ocelot_write_rix(ocelot, 0, ANA_PGID_PGID, cpu); + /* Instead set up a multicast destination PGID for traffic copied to + * the CPU. Whitelisted MAC addresses like the port netdevice MAC + * addresses will be copied to the CPU via this PGID. + */ ocelot_write_rix(ocelot, BIT(cpu), ANA_PGID_PGID, PGID_CPU); ocelot_write_gix(ocelot, ANA_PORT_PORT_CFG_RECV_ENA | ANA_PORT_PORT_CFG_PORTID_VAL(cpu), ANA_PORT_PORT_CFG, cpu); - /* If the CPU port is a physical port, set up the port in Node - * Processor Interface (NPI) mode. This is the mode through which - * frames can be injected from and extracted to an external CPU. - * Only one port can be an NPI at the same time. - */ - if (cpu < ocelot->num_phys_ports) { + if (npi >= 0 && npi < ocelot->num_phys_ports) { int mtu = VLAN_ETH_FRAME_LEN + OCELOT_TAG_LEN; ocelot_write(ocelot, QSYS_EXT_CPU_CFG_EXT_CPUQ_MSK_M | - QSYS_EXT_CPU_CFG_EXT_CPU_PORT(cpu), + QSYS_EXT_CPU_CFG_EXT_CPU_PORT(npi), QSYS_EXT_CPU_CFG); if (injection == OCELOT_TAG_PREFIX_SHORT) @@ -2336,14 +2335,27 @@ void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu, else if (injection == OCELOT_TAG_PREFIX_LONG) mtu += OCELOT_LONG_PREFIX_LEN; - ocelot_port_set_mtu(ocelot, cpu, mtu); + ocelot_port_set_mtu(ocelot, npi, mtu); + + /* Enable NPI port */ + ocelot_write_rix(ocelot, + QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE | + QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) | + QSYS_SWITCH_PORT_MODE_PORT_ENA, + QSYS_SWITCH_PORT_MODE, npi); + /* NPI port Injection/Extraction configuration */ + ocelot_write_rix(ocelot, + SYS_PORT_MODE_INCL_XTR_HDR(extraction) | + SYS_PORT_MODE_INCL_INJ_HDR(injection), + SYS_PORT_MODE, npi); } - /* CPU port Injection/Extraction configuration */ + /* Enable CPU port module */ ocelot_write_rix(ocelot, QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE | QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG(1) | QSYS_SWITCH_PORT_MODE_PORT_ENA, QSYS_SWITCH_PORT_MODE, cpu); + /* CPU port Injection/Extraction configuration */ ocelot_write_rix(ocelot, SYS_PORT_MODE_INCL_XTR_HDR(extraction) | SYS_PORT_MODE_INCL_INJ_HDR(injection), SYS_PORT_MODE, cpu); @@ -2353,10 +2365,8 @@ void ocelot_set_cpu_port(struct ocelot *ocelot, int cpu, ANA_PORT_VLAN_CFG_VLAN_AWARE_ENA | ANA_PORT_VLAN_CFG_VLAN_POP_CNT(1), ANA_PORT_VLAN_CFG, cpu); - - ocelot->cpu = cpu; } -EXPORT_SYMBOL(ocelot_set_cpu_port); +EXPORT_SYMBOL(ocelot_configure_cpu); int ocelot_init(struct ocelot *ocelot) { diff --git a/drivers/net/ethernet/mscc/ocelot_board.c b/drivers/net/ethernet/mscc/ocelot_board.c index c343ca5276ef..0ac9fbf77a01 100644 --- a/drivers/net/ethernet/mscc/ocelot_board.c +++ b/drivers/net/ethernet/mscc/ocelot_board.c @@ -453,8 +453,6 @@ static int mscc_ocelot_probe(struct platform_device *pdev) ocelot->ptp = 1; } - ocelot->num_cpu_ports = 1; /* 1 port on the switch, two groups */ - ports = of_get_child_by_name(np, "ethernet-ports"); if (!ports) { dev_err(&pdev->dev, "no ethernet-ports child node found\n"); @@ -471,8 +469,9 @@ static int mscc_ocelot_probe(struct platform_device *pdev) ocelot->vcap = vsc7514_vcap_props; ocelot_init(ocelot); - ocelot_set_cpu_port(ocelot, ocelot->num_phys_ports, - OCELOT_TAG_PREFIX_NONE, OCELOT_TAG_PREFIX_NONE); + /* No NPI port */ + ocelot_configure_cpu(ocelot, -1, OCELOT_TAG_PREFIX_NONE, + OCELOT_TAG_PREFIX_NONE); for_each_available_child_of_node(ports, portnp) { struct ocelot_port_private *priv; |