diff options
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 42 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 2 | ||||
-rw-r--r-- | drivers/net/dsa/microchip/ksz_common.h | 2 | ||||
-rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.c | 22 | ||||
-rw-r--r-- | drivers/net/dsa/mv88e6xxx/chip.h | 1 |
5 files changed, 43 insertions, 26 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c index 687d442f3bc7..dc999406ce86 100644 --- a/drivers/net/dsa/microchip/ksz9477.c +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -965,23 +965,6 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port, PORT_MIRROR_SNIFFER, false); } -static void ksz9477_phy_setup(struct ksz_device *dev, int port, - struct phy_device *phy) -{ - /* Only apply to port with PHY. */ - if (port >= dev->phy_port_cnt) - return; - - /* The MAC actually cannot run in 1000 half-duplex mode. */ - phy_remove_link_mode(phy, - ETHTOOL_LINK_MODE_1000baseT_Half_BIT); - - /* PHY does not support gigabit. */ - if (!(dev->features & GBIT_SUPPORT)) - phy_remove_link_mode(phy, - ETHTOOL_LINK_MODE_1000baseT_Full_BIT); -} - static bool ksz9477_get_gbit(struct ksz_device *dev, u8 data) { bool gbit; @@ -1585,7 +1568,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { .get_port_addr = ksz9477_get_port_addr, .cfg_port_member = ksz9477_cfg_port_member, .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table, - .phy_setup = ksz9477_phy_setup, .port_setup = ksz9477_port_setup, .r_mib_cnt = ksz9477_r_mib_cnt, .r_mib_pkt = ksz9477_r_mib_pkt, @@ -1599,7 +1581,29 @@ static const struct ksz_dev_ops ksz9477_dev_ops = { int ksz9477_switch_register(struct ksz_device *dev) { - return ksz_switch_register(dev, &ksz9477_dev_ops); + int ret, i; + struct phy_device *phydev; + + ret = ksz_switch_register(dev, &ksz9477_dev_ops); + if (ret) + return ret; + + for (i = 0; i < dev->phy_port_cnt; ++i) { + if (!dsa_is_user_port(dev->ds, i)) + continue; + + phydev = dsa_to_port(dev->ds, i)->slave->phydev; + + /* The MAC actually cannot run in 1000 half-duplex mode. */ + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_1000baseT_Half_BIT); + + /* PHY does not support gigabit. */ + if (!(dev->features & GBIT_SUPPORT)) + phy_remove_link_mode(phydev, + ETHTOOL_LINK_MODE_1000baseT_Full_BIT); + } + return ret; } EXPORT_SYMBOL(ksz9477_switch_register); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 74f2216989ee..8d53b12d40a8 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -349,8 +349,6 @@ int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) /* setup slave port */ dev->dev_ops->port_setup(dev, port, false); - if (dev->dev_ops->phy_setup) - dev->dev_ops->phy_setup(dev, port, phy); /* port_stp_state_set() will be called after to enable the port so * there is no need to do anything. diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h index f7d92c1656b8..206838160f49 100644 --- a/drivers/net/dsa/microchip/ksz_common.h +++ b/drivers/net/dsa/microchip/ksz_common.h @@ -115,8 +115,6 @@ struct ksz_dev_ops { u32 (*get_port_addr)(int port, int offset); void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member); void (*flush_dyn_mac_table)(struct ksz_device *dev, int port); - void (*phy_setup)(struct ksz_device *dev, int port, - struct phy_device *phy); void (*port_cleanup)(struct ksz_device *dev, int port); void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port); void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val); diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index b8a3e8c88c07..7a71c9902e73 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -664,8 +664,11 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, const struct phylink_link_state *state) { struct mv88e6xxx_chip *chip = ds->priv; + struct mv88e6xxx_port *p; int err; + p = &chip->ports[port]; + /* FIXME: is this the correct test? If we're in fixed mode on an * internal port, why should we process this any different from * PHY mode? On the other hand, the port may be automedia between @@ -675,10 +678,14 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, return; mv88e6xxx_reg_lock(chip); - /* FIXME: should we force the link down here - but if we do, how - * do we restore the link force/unforce state? The driver layering - * gets in the way. + /* In inband mode, the link may come up at any time while the link + * is not forced down. Force the link down while we reconfigure the + * interface mode. */ + if (mode == MLO_AN_INBAND && p->interface != state->interface && + chip->info->ops->port_set_link) + chip->info->ops->port_set_link(chip, port, LINK_FORCED_DOWN); + err = mv88e6xxx_port_config_interface(chip, port, state->interface); if (err && err != -EOPNOTSUPP) goto err_unlock; @@ -691,6 +698,15 @@ static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port, if (err > 0) err = 0; + /* Undo the forced down state above after completing configuration + * irrespective of its state on entry, which allows the link to come up. + */ + if (mode == MLO_AN_INBAND && p->interface != state->interface && + chip->info->ops->port_set_link) + chip->info->ops->port_set_link(chip, port, LINK_UNFORCED); + + p->interface = state->interface; + err_unlock: mv88e6xxx_reg_unlock(chip); diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 2d70eac30e58..823ae89e5fca 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -232,6 +232,7 @@ struct mv88e6xxx_port { u64 atu_full_violation; u64 vtu_member_violation; u64 vtu_miss_violation; + phy_interface_t interface; u8 cmode; bool mirror_ingress; bool mirror_egress; |