diff options
Diffstat (limited to 'drivers/net/atl1/atl1_hw.c')
| -rw-r--r-- | drivers/net/atl1/atl1_hw.c | 44 |
1 files changed, 21 insertions, 23 deletions
diff --git a/drivers/net/atl1/atl1_hw.c b/drivers/net/atl1/atl1_hw.c index 69482e0d849b..ef886bdeac13 100644 --- a/drivers/net/atl1/atl1_hw.c +++ b/drivers/net/atl1/atl1_hw.c @@ -2,20 +2,20 @@ * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. * Copyright(c) 2006 Chris Snook <csnook@redhat.com> * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com> - * + * * Derived from Intel e1000 driver * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. - * + * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. - * + * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. @@ -38,12 +38,13 @@ */ s32 atl1_reset_hw(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; u32 icr; int i; - /* + /* * Clear Interrupt mask to stop board from generating - * interrupts & Clear any pending interrupt events + * interrupts & Clear any pending interrupt events */ /* * iowrite32(0, hw->hw_addr + REG_IMR); @@ -74,7 +75,7 @@ s32 atl1_reset_hw(struct atl1_hw *hw) } if (icr) { - printk (KERN_DEBUG "icr = %x\n", icr); + dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr); return icr; } @@ -136,8 +137,8 @@ s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data) int i; val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT | - MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << - MDIO_CLK_SEL_SHIFT; + MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 << + MDIO_CLK_SEL_SHIFT; iowrite32(val, hw->hw_addr + REG_MDIO_CTRL); ioread32(hw->hw_addr + REG_MDIO_CTRL); @@ -204,7 +205,7 @@ static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf) /* * get_permanent_address - * return 0 if get valid mac address, + * return 0 if get valid mac address, */ static int atl1_get_permanent_address(struct atl1_hw *hw) { @@ -301,7 +302,7 @@ static int atl1_get_permanent_address(struct atl1_hw *hw) } /* - * Reads the adapter's MAC address from the EEPROM + * Reads the adapter's MAC address from the EEPROM * hw - Struct containing variables accessed by shared code */ s32 atl1_read_mac_addr(struct atl1_hw *hw) @@ -437,6 +438,7 @@ s32 atl1_phy_enter_power_saving(struct atl1_hw *hw) */ static s32 atl1_phy_reset(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; u16 phy_data; @@ -468,8 +470,7 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) u32 val; int i; /* pcie serdes link may be down! */ - printk(KERN_DEBUG "%s: autoneg caused pcie phy link down\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "pcie phy link down\n"); for (i = 0; i < 25; i++) { msleep(1); @@ -479,9 +480,7 @@ static s32 atl1_phy_reset(struct atl1_hw *hw) } if ((val & (MDIO_START | MDIO_BUSY)) != 0) { - printk(KERN_WARNING - "%s: pcie link down at least for 25ms\n", - atl1_driver_name); + dev_warn(&pdev->dev, "pcie link down at least 25ms\n"); return ret_val; } } @@ -571,6 +570,7 @@ s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw) */ static s32 atl1_setup_link(struct atl1_hw *hw) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; /* @@ -581,15 +581,13 @@ static s32 atl1_setup_link(struct atl1_hw *hw) */ ret_val = atl1_phy_setup_autoneg_adv(hw); if (ret_val) { - printk(KERN_DEBUG "%s: error setting up autonegotiation\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error setting up autonegotiation\n"); return ret_val; } /* SW.Reset , En-Auto-Neg if needed */ ret_val = atl1_phy_reset(hw); if (ret_val) { - printk(KERN_DEBUG "%s: error resetting the phy\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error resetting phy\n"); return ret_val; } hw->phy_configured = true; @@ -631,7 +629,7 @@ static void atl1_init_flash_opcode(struct atl1_hw *hw) * Performs basic configuration of the adapter. * hw - Struct containing variables accessed by shared code * Assumes that the controller has previously been reset and is in a - * post-reset uninitialized state. Initializes multicast table, + * post-reset uninitialized state. Initializes multicast table, * and Calls routines to setup link * Leaves the transmit and receive units disabled and uninitialized. */ @@ -669,6 +667,7 @@ s32 atl1_init_hw(struct atl1_hw *hw) */ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) { + struct pci_dev *pdev = hw->back->pdev; s32 ret_val; u16 phy_data; @@ -691,8 +690,7 @@ s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex) *speed = SPEED_10; break; default: - printk(KERN_DEBUG "%s: error getting speed\n", - atl1_driver_name); + dev_dbg(&pdev->dev, "error getting speed\n"); return ATL1_ERR_PHY_SPEED; break; } |