diff options
Diffstat (limited to 'drivers/mtd')
34 files changed, 6398 insertions, 6090 deletions
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index c1eda67d1ad2..6e816eafb312 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -24,87 +24,6 @@ config MTD_SPI_NOR_USE_4K_SECTORS Please note that some tools/drivers/filesystems may not work with 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum). -config SPI_ASPEED_SMC - tristate "Aspeed flash controllers in SPI mode" - depends on ARCH_ASPEED || COMPILE_TEST - depends on HAS_IOMEM && OF - help - This enables support for the Firmware Memory controller (FMC) - in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips, - and support for the SPI flash memory controller (SPI) for - the host firmware. The implementation only supports SPI NOR. - -config SPI_CADENCE_QUADSPI - tristate "Cadence Quad SPI controller" - depends on OF && (ARM || ARM64 || COMPILE_TEST) - help - Enable support for the Cadence Quad SPI Flash controller. - - Cadence QSPI is a specialized controller for connecting an SPI - Flash over 1/2/4-bit wide bus. Enable this option if you have a - device with a Cadence QSPI controller and want to access the - Flash as an MTD device. - -config SPI_HISI_SFC - tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)" - depends on ARCH_HISI || COMPILE_TEST - depends on HAS_IOMEM - help - This enables support for HiSilicon FMC SPI-NOR flash controller. - -config SPI_MTK_QUADSPI - tristate "MediaTek Quad SPI controller" - depends on HAS_IOMEM - help - This enables support for the Quad SPI controller in master mode. - This controller does not support generic SPI. It only supports - SPI NOR. - -config SPI_NXP_SPIFI - tristate "NXP SPI Flash Interface (SPIFI)" - depends on OF && (ARCH_LPC18XX || COMPILE_TEST) - depends on HAS_IOMEM - help - Enable support for the NXP LPC SPI Flash Interface controller. - - SPIFI is a specialized controller for connecting serial SPI - Flash. Enable this option if you have a device with a SPIFI - controller and want to access the Flash as a mtd device. - -config SPI_INTEL_SPI - tristate - -config SPI_INTEL_SPI_PCI - tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)" - depends on X86 && PCI - select SPI_INTEL_SPI - help - This enables PCI support for the Intel PCH/PCU SPI controller in - master mode. This controller is present in modern Intel hardware - and is used to hold BIOS and other persistent settings. Using - this driver it is possible to upgrade BIOS directly from Linux. - - Say N here unless you know what you are doing. Overwriting the - SPI flash may render the system unbootable. - - To compile this driver as a module, choose M here: the module - will be called intel-spi-pci. - -config SPI_INTEL_SPI_PLATFORM - tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)" - depends on X86 - select SPI_INTEL_SPI - help - This enables platform support for the Intel PCH/PCU SPI - controller in master mode. This controller is present in modern - Intel hardware and is used to hold BIOS and other persistent - settings. Using this driver it is possible to upgrade BIOS - directly from Linux. - - Say N here unless you know what you are doing. Overwriting the - SPI flash may render the system unbootable. - - To compile this driver as a module, choose M here: the module - will be called intel-spi-platform. +source "drivers/mtd/spi-nor/controllers/Kconfig" endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 9c5ed03cdc19..7ddb742de1fe 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -1,10 +1,20 @@ # SPDX-License-Identifier: GPL-2.0 + +spi-nor-objs := core.o sfdp.o +spi-nor-objs += atmel.o +spi-nor-objs += catalyst.o +spi-nor-objs += eon.o +spi-nor-objs += esmt.o +spi-nor-objs += everspin.o +spi-nor-objs += fujitsu.o +spi-nor-objs += gigadevice.o +spi-nor-objs += intel.o +spi-nor-objs += issi.o +spi-nor-objs += macronix.o +spi-nor-objs += micron-st.o +spi-nor-objs += spansion.o +spi-nor-objs += sst.o +spi-nor-objs += winbond.o +spi-nor-objs += xilinx.o +spi-nor-objs += xmc.o obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o -obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o -obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o -obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o -obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o -obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o -obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o -obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o -obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o diff --git a/drivers/mtd/spi-nor/atmel.c b/drivers/mtd/spi-nor/atmel.c new file mode 100644 index 000000000000..3f5f21a473a6 --- /dev/null +++ b/drivers/mtd/spi-nor/atmel.c @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#include <linux/mtd/spi-nor.h> + +#include "core.h" + +static const struct flash_info atmel_parts[] = { + /* Atmel -- some are (confusingly) marketed as "DataFlash" */ + { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, + { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, + + { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) }, + { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, + { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) }, + { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) }, + + { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + + { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) }, + { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) }, + { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, + { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, + + { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, +}; + +static void atmel_default_init(struct spi_nor *nor) +{ + nor->flags |= SNOR_F_HAS_LOCK; +} + +static const struct spi_nor_fixups atmel_fixups = { + .default_init = atmel_default_init, +}; + +const struct spi_nor_manufacturer spi_nor_atmel = { + .name = "atmel", + .parts = atmel_parts, + .nparts = ARRAY_SIZE(atmel_parts), + .fixups = &atmel_fixups, +}; diff --git a/drivers/mtd/spi-nor/catalyst.c b/drivers/mtd/spi-nor/catalyst.c new file mode 100644 index 000000000000..011b83e99e95 --- /dev/null +++ b/drivers/mtd/spi-nor/catalyst.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#include <linux/mtd/spi-nor.h> + +#include "core.h" + +static const struct flash_info catalyst_parts[] = { + /* Catalyst / On Semiconductor -- non-JEDEC */ + { "cat25c11", CAT25_INFO(16, 8, 16, 1, + SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c03", CAT25_INFO(32, 8, 16, 2, + SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c09", CAT25_INFO(128, 8, 32, 2, + SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25c17", CAT25_INFO(256, 8, 32, 2, + SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, + { "cat25128", CAT25_INFO(2048, 8, 64, 2, + SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, +}; + +const struct spi_nor_manufacturer spi_nor_catalyst = { + .name = "catalyst", + .parts = catalyst_parts, + .nparts = ARRAY_SIZE(catalyst_parts), +}; diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig new file mode 100644 index 000000000000..10b86660b821 --- /dev/null +++ b/drivers/mtd/spi-nor/controllers/Kconfig @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on ARCH_ASPEED || COMPILE_TEST + depends on HAS_IOMEM && OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips, + and support for the SPI flash memory controller (SPI) for + the host firmware. The implementation only supports SPI NOR. + +config SPI_CADENCE_QUADSPI + tristate "Cadence Quad SPI controller" + depends on OF && (ARM || ARM64 || COMPILE_TEST) + help + Enable support for the Cadence Quad SPI Flash controller. + + Cadence QSPI is a specialized controller for connecting an SPI + Flash over 1/2/4-bit wide bus. Enable this option if you have a + device with a Cadence QSPI controller and want to access the + Flash as an MTD device. + +config SPI_HISI_SFC + tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)" + depends on ARCH_HISI || COMPILE_TEST + depends on HAS_IOMEM + help + This enables support for HiSilicon FMC SPI-NOR flash controller. + +config SPI_NXP_SPIFI + tristate "NXP SPI Flash Interface (SPIFI)" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + depends on HAS_IOMEM + help + Enable support for the NXP LPC SPI Flash Interface controller. + + SPIFI is a specialized controller for connecting serial SPI + Flash. Enable this option if you have a device with a SPIFI + controller and want to access the Flash as a mtd device. + +config SPI_INTEL_SPI + tristate + +config SPI_INTEL_SPI_PCI + tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)" + depends on X86 && PCI + select SPI_INTEL_SPI + help + This enables PCI support for the Intel PCH/PCU SPI controller in + master mode. This controller is present in modern Intel hardware + and is used to hold BIOS and other persistent settings. Using + this driver it is possible to upgrade BIOS directly from Linux. + + Say N here unless you know what you are doing. Overwriting the + SPI flash may render the system unbootable. + + To compile this driver as a module, choose M here: the module + will be called intel-spi-pci. + +config SPI_INTEL_SPI_PLATFORM + tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)" + depends on X86 + select SPI_INTEL_SPI + help + This enables platform support for the Intel PCH/PCU SPI + controller in master mode. This controller is present in modern + Intel hardware and is used to hold BIOS and other persistent + settings. Using this driver it is possible to upgrade BIOS + directly from Linux. + + Say N here unless you know what you are doing. Overwriting the + SPI flash may render the system unbootable. + + To compile this driver as a module, choose M here: the module + will be called intel-spi-platform. diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile new file mode 100644 index 000000000000..46e6fbe586e3 --- /dev/null +++ b/drivers/mtd/spi-nor/controllers/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o +obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o +obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o +obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o +obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o +obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o +obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c index 395127349aa8..e26a1897db0e 100644 --- a/drivers/mtd/spi-nor/aspeed-smc.c +++ b/drivers/mtd/spi-nor/controllers/aspeed-smc.c @@ -109,7 +109,7 @@ struct aspeed_smc_controller { void __iomem *ahb_base; /* per-chip windows resource */ u32 ahb_window_size; /* full mapping window size */ - struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */ + struct aspeed_smc_chip *chips[]; /* pointers to attached chips */ }; /* diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/controllers/cadence-quadspi.c index 494dcab4aaaa..494dcab4aaaa 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/controllers/cadence-quadspi.c diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c index 6c7a4118752e..6c7a4118752e 100644 --- a/drivers/mtd/spi-nor/hisi-sfc.c +++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c diff --git a/drivers/mtd/spi-nor/intel-spi-pci.c b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c index 81329f680bec..81329f680bec 100644 --- a/drivers/mtd/spi-nor/intel-spi-pci.c +++ b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c diff --git a/drivers/mtd/spi-nor/intel-spi-platform.c b/drivers/mtd/spi-nor/controllers/intel-spi-platform.c index f80f1086f928..f80f1086f928 100644 --- a/drivers/mtd/spi-nor/intel-spi-platform.c +++ b/drivers/mtd/spi-nor/controllers/intel-spi-platform.c diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/controllers/intel-spi.c index 61d2a0ad2131..61d2a0ad2131 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/controllers/intel-spi.c diff --git a/drivers/mtd/spi-nor/intel-spi.h b/drivers/mtd/spi-nor/controllers/intel-spi.h index e2f41b8827bf..e2f41b8827bf 100644 --- a/drivers/mtd/spi-nor/intel-spi.h +++ b/drivers/mtd/spi-nor/controllers/intel-spi.h diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c index 9a5b1a7c636a..9a5b1a7c636a 100644 --- a/drivers/mtd/spi-nor/nxp-spifi.c +++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c new file mode 100644 index 000000000000..cc68ea84318e --- /dev/null +++ b/drivers/mtd/spi-nor/core.c @@ -0,0 +1,3466 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with + * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c + * + * Copyright (C) 2005, Intec Automation Inc. + * Copyright (C) 2014, Freescale Semiconductor, Inc. + */ + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/math64.h> +#include <linux/sizes.h> +#include <linux/slab.h> + +#include <linux/mtd/mtd.h> +#include <linux/of_platform.h> +#include <linux/sched/task_stack.h> +#include <linux/spi/flash.h> +#include <linux/mtd/spi-nor.h> + +#include "core.h" + +/* Define max times to check status register before we give up. */ + +/* + * For everything but full-chip erase; probably could be much smaller, but kept + * around for safety for now + */ +#define DEFAULT_READY_WAIT_JIFFIES (40UL * HZ) + +/* + * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up + * for larger flash + */ +#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) + +#define SPI_NOR_MAX_ADDR_WIDTH 4 + +/** + * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data + * transfer + * @nor: pointer to 'struct spi_nor' + * @op: pointer to 'struct spi_mem_op' template for transfer + * + * If we have to use the bounce buffer, the data field in @op will be updated. + * + * Return: true if the bounce buffer is needed, false if not + */ +static bool spi_nor_spimem_bounce(struct spi_nor *nor, struct spi_mem_op *op) +{ + /* op->data.buf.in occupies the same memory as op->data.buf.out */ + if (object_is_on_stack(op->data.buf.in) || + !virt_addr_valid(op->data.buf.in)) { + if (op->data.nbytes > nor->bouncebuf_size) + op->data.nbytes = nor->bouncebuf_size; + op->data.buf.in = nor->bouncebuf; + return true; + } + + return false; +} + +/** + * spi_nor_spimem_exec_op() - execute a memory operation + * @nor: pointer to 'struct spi_nor' + * @op: pointer to 'struct spi_mem_op' template for transfer + * + * Return: 0 on success, -error otherwise. + */ +static int spi_nor_spimem_exec_op(struct spi_nor *nor, struct spi_mem_op *op) +{ + int error; + + error = spi_mem_adjust_op_size(nor->spimem, op); + if (error) + return error; + + return spi_mem_exec_op(nor->spimem, op); +} + +/** + * spi_nor_spimem_read_data() - read data from flash's memory region via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, + size_t len, u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, from, 1), + SPI_MEM_OP_DUMMY(nor->read_dummy, 1), + SPI_MEM_OP_DATA_IN(len, buf, 1)); + bool usebouncebuf; + ssize_t nbytes; + int error; + + /* get transfer protocols. */ + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); + op.dummy.buswidth = op.addr.buswidth; + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); + + /* convert the dummy cycles to the number of bytes */ + op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; + + usebouncebuf = spi_nor_spimem_bounce(nor, &op); + + if (nor->dirmap.rdesc) { + nbytes = spi_mem_dirmap_read(nor->dirmap.rdesc, op.addr.val, + op.data.nbytes, op.data.buf.in); + } else { + error = spi_nor_spimem_exec_op(nor, &op); + if (error) + return error; + nbytes = op.data.nbytes; + } + + if (usebouncebuf && nbytes > 0) + memcpy(buf, op.data.buf.in, nbytes); + + return nbytes; +} + +/** + * spi_nor_read_data() - read data from flash memory + * @nor: pointer to 'struct spi_nor' + * @from: offset to read from + * @len: number of bytes to read + * @buf: pointer to dst buffer + * + * Return: number of bytes read successfully, -errno otherwise + */ +ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_read_data(nor, from, len, buf); + + return nor->controller_ops->read(nor, from, len, buf); +} + +/** + * spi_nor_spimem_write_data() - write data to flash memory via + * spi-mem + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, + size_t len, const u8 *buf) +{ + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1), + SPI_MEM_OP_ADDR(nor->addr_width, to, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(len, buf, 1)); + ssize_t nbytes; + int error; + + op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); + op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); + op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); + + if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) + op.addr.nbytes = 0; + + if (spi_nor_spimem_bounce(nor, &op)) + memcpy(nor->bouncebuf, buf, op.data.nbytes); + + if (nor->dirmap.wdesc) { + nbytes = spi_mem_dirmap_write(nor->dirmap.wdesc, op.addr.val, + op.data.nbytes, op.data.buf.out); + } else { + error = spi_nor_spimem_exec_op(nor, &op); + if (error) + return error; + nbytes = op.data.nbytes; + } + + return nbytes; +} + +/** + * spi_nor_write_data() - write data to flash memory + * @nor: pointer to 'struct spi_nor' + * @to: offset to write to + * @len: number of bytes to write + * @buf: pointer to src buffer + * + * Return: number of bytes written successfully, -errno otherwise + */ +ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len, + const u8 *buf) +{ + if (nor->spimem) + return spi_nor_spimem_write_data(nor, to, len, buf); + + return nor->controller_ops->write(nor, to, len, buf); +} + +/** + * spi_nor_write_enable() - Set write enable latch with Write Enable command. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. + */ +int spi_nor_write_enable(struct spi_nor *nor) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN, + NULL, 0); + } + + if (ret) + dev_dbg(nor->dev, "error %d on Write Enable\n", ret); + + return ret; +} + +/** + * spi_nor_write_disable() - Send Write Disable instruction to the chip. + * @nor: pointer to 'struct spi_nor'. + * + * Return: 0 on success, -errno otherwise. + */ +int spi_nor_write_disable(struct spi_nor *nor) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI, + NULL, 0); + } + + if (ret) + dev_dbg(nor->dev, "error %d on Write Disable\n", ret); + + return ret; +} + +/** + * spi_nor_read_sr() - Read the Status Register. + * @nor: pointer to 'struct spi_nor'. + * @sr: pointer to a DMA-able buffer where the value of the + * Status Register will be written. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, sr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR, + sr, 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d reading SR\n", ret); + + return ret; +} + +/** + * spi_nor_read_fsr() - Read the Flag Status Register. + * @nor: pointer to 'struct spi_nor' + * @fsr: pointer to a DMA-able buffer where the value of the + * Flag Status Register will be written. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, fsr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR, + fsr, 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d reading FSR\n", ret); + + return ret; +} + +/** + * spi_nor_read_cr() - Read the Configuration Register using the + * SPINOR_OP_RDCR (35h) command. + * @nor: pointer to 'struct spi_nor' + * @cr: pointer to a DMA-able buffer where the value of the + * Configuration Register will be written. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, cr, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d reading CR\n", ret); + + return ret; +} + +/** + * spi_nor_set_4byte_addr_mode() - Enter/Exit 4-byte address mode. + * @nor: pointer to 'struct spi_nor'. + * @enable: true to enter the 4-byte address mode, false to exit the 4-byte + * address mode. + * + * Return: 0 on success, -errno otherwise. + */ +int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable) +{ + int ret; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(enable ? + SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_NO_DATA); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, + enable ? SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + NULL, 0); + } + + if (ret) + dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret); + + return ret; +} + +/** + * spansion_set_4byte_addr_mode() - Set 4-byte address mode for Spansion + * flashes. + * @nor: pointer to 'struct spi_nor'. + * @enable: true to enter the 4-byte address mode, false to exit the 4-byte + * address mode. + * + * Return: 0 on success, -errno otherwise. + */ +static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable) +{ + int ret; + + nor->bouncebuf[0] = enable << 7; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR, + nor->bouncebuf, 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret); + + return ret; +} + +/** + * spi_nor_write_ear() - Write Extended Address Register. + * @nor: pointer to 'struct spi_nor'. + * @ear: value to write to the Extended Address Register. + * + * Return: 0 on success, -errno otherwise. + */ +int spi_nor_write_ear(struct spi_nor *nor, u8 ear) +{ + int ret; + + nor->bouncebuf[0] = ear; + + if (nor->spimem) { + struct spi_mem_op op = + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1), + SPI_MEM_OP_NO_ADDR, + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + + ret = spi_mem_exec_op(nor->spimem, &op); + } else { + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR, + nor->bouncebuf, 1); + } + + if (ret) + dev_dbg(nor->dev, "error %d writing EAR\n", ret); + |