summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/spi-nor
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/spi-nor')
-rw-r--r--drivers/mtd/spi-nor/Kconfig4
-rw-r--r--drivers/mtd/spi-nor/controllers/Kconfig4
-rw-r--r--drivers/mtd/spi-nor/controllers/aspeed-smc.c2
-rw-r--r--drivers/mtd/spi-nor/controllers/hisi-sfc.c2
-rw-r--r--drivers/mtd/spi-nor/controllers/nxp-spifi.c2
-rw-r--r--drivers/mtd/spi-nor/core.c22
-rw-r--r--drivers/mtd/spi-nor/macronix.c6
-rw-r--r--drivers/mtd/spi-nor/micron-st.c6
-rw-r--r--drivers/mtd/spi-nor/sfdp.c34
-rw-r--r--drivers/mtd/spi-nor/sfdp.h11
-rw-r--r--drivers/mtd/spi-nor/spansion.c44
-rw-r--r--drivers/mtd/spi-nor/winbond.c29
12 files changed, 122 insertions, 44 deletions
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 6e816eafb312..ffc4b380f2b1 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -1,12 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
menuconfig MTD_SPI_NOR
- tristate "SPI-NOR device support"
+ tristate "SPI NOR device support"
depends on MTD
depends on MTD && SPI_MASTER
select SPI_MEM
help
This is the framework for the SPI NOR which can be used by the SPI
- device drivers and the SPI-NOR device driver.
+ device drivers and the SPI NOR device driver.
if MTD_SPI_NOR
diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig
index 10b86660b821..d89a5ea9446a 100644
--- a/drivers/mtd/spi-nor/controllers/Kconfig
+++ b/drivers/mtd/spi-nor/controllers/Kconfig
@@ -21,11 +21,11 @@ config SPI_CADENCE_QUADSPI
Flash as an MTD device.
config SPI_HISI_SFC
- tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
+ tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)"
depends on ARCH_HISI || COMPILE_TEST
depends on HAS_IOMEM
help
- This enables support for HiSilicon FMC SPI-NOR flash controller.
+ This enables support for HiSilicon FMC SPI NOR flash controller.
config SPI_NXP_SPIFI
tristate "NXP SPI Flash Interface (SPIFI)"
diff --git a/drivers/mtd/spi-nor/controllers/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c
index ae85e4c0e114..7225870e8b18 100644
--- a/drivers/mtd/spi-nor/controllers/aspeed-smc.c
+++ b/drivers/mtd/spi-nor/controllers/aspeed-smc.c
@@ -727,7 +727,7 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
/*
* TODO: Adjust clocks if fast read is supported and interpret
- * SPI-NOR flags to adjust controller settings.
+ * SPI NOR flags to adjust controller settings.
*/
if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
if (chip->nor.read_dummy == 0)
diff --git a/drivers/mtd/spi-nor/controllers/hisi-sfc.c b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
index 6c7a4118752e..95c502173cbd 100644
--- a/drivers/mtd/spi-nor/controllers/hisi-sfc.c
+++ b/drivers/mtd/spi-nor/controllers/hisi-sfc.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
- * HiSilicon FMC SPI-NOR flash controller driver
+ * HiSilicon FMC SPI NOR flash controller driver
*
* Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
*/
diff --git a/drivers/mtd/spi-nor/controllers/nxp-spifi.c b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
index 9a5b1a7c636a..5703e8313980 100644
--- a/drivers/mtd/spi-nor/controllers/nxp-spifi.c
+++ b/drivers/mtd/spi-nor/controllers/nxp-spifi.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
+ * SPI NOR driver for NXP SPI Flash Interface (SPIFI)
*
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
*
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index cc68ea84318e..0369d98b2d12 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -499,7 +499,7 @@ int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
* the flash is ready for new commands.
* @nor: pointer to 'struct spi_nor'.
*
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
*/
static int spi_nor_xsr_ready(struct spi_nor *nor)
{
@@ -542,7 +542,7 @@ static void spi_nor_clear_sr(struct spi_nor *nor)
* for new commands.
* @nor: pointer to 'struct spi_nor'.
*
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
*/
static int spi_nor_sr_ready(struct spi_nor *nor)
{
@@ -606,7 +606,7 @@ static void spi_nor_clear_fsr(struct spi_nor *nor)
* ready for new commands.
* @nor: pointer to 'struct spi_nor'.
*
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
*/
static int spi_nor_fsr_ready(struct spi_nor *nor)
{
@@ -640,14 +640,14 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
return -EIO;
}
- return nor->bouncebuf[0] & FSR_READY;
+ return !!(nor->bouncebuf[0] & FSR_READY);
}
/**
* spi_nor_ready() - Query the flash to see if it is ready for new commands.
* @nor: pointer to 'struct spi_nor'.
*
- * Return: 0 on success, -errno otherwise.
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
*/
static int spi_nor_ready(struct spi_nor *nor)
{
@@ -2469,7 +2469,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
nor->read_proto = read->proto;
/*
- * In the spi-nor framework, we don't need to make the difference
+ * In the SPI NOR framework, we don't need to make the difference
* between mode clock cycles and wait state clock cycles.
* Indeed, the value of the mode clock cycles is used by a QSPI
* flash memory to know whether it should enter or leave its 0-4-4
@@ -2675,7 +2675,7 @@ static int spi_nor_setup(struct spi_nor *nor,
/**
* spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
* settings based on MFR register and ->default_init() hook.
- * @nor: pointer to a 'struct spi-nor'.
+ * @nor: pointer to a 'struct spi_nor'.
*/
static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
{
@@ -2690,7 +2690,7 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
/**
* spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
* based on JESD216 SFDP standard.
- * @nor: pointer to a 'struct spi-nor'.
+ * @nor: pointer to a 'struct spi_nor'.
*
* The method has a roll-back mechanism: in case the SFDP parsing fails, the
* legacy flash parameters and settings will be restored.
@@ -2712,7 +2712,7 @@ static void spi_nor_sfdp_init_params(struct spi_nor *nor)
/**
* spi_nor_info_init_params() - Initialize the flash's parameters and settings
* based on nor->info data.
- * @nor: pointer to a 'struct spi-nor'.
+ * @nor: pointer to a 'struct spi_nor'.
*/
static void spi_nor_info_init_params(struct spi_nor *nor)
{
@@ -2841,7 +2841,7 @@ static void spi_nor_late_init_params(struct spi_nor *nor)
/**
* spi_nor_init_params() - Initialize the flash's parameters and settings.
- * @nor: pointer to a 'struct spi-nor'.
+ * @nor: pointer to a 'struct spi_nor'.
*
* The flash parameters and settings are initialized based on a sequence of
* calls that are ordered by priority:
@@ -3126,7 +3126,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
/*
* Make sure the XSR_RDY flag is set before calling
* spi_nor_wait_till_ready(). Xilinx S3AN share MFR
- * with Atmel spi-nor
+ * with Atmel SPI NOR.
*/
if (info->flags & SPI_NOR_XSR_RDY)
nor->flags |= SNOR_F_READY_XSR_RDY;
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index ab0f963d630c..96735d83c77c 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -63,10 +63,16 @@ static const struct flash_info macronix_parts[] = {
.fixups = &mx25l25635_fixups },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_4B_OPCODES) },
+ { "mx25u51245g", INFO(0xc2253a, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16,
SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ { "mx25l51245g", INFO(0xc2201a, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_4B_OPCODES) },
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 6c034b9718e2..3dca5b9af3b6 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -29,7 +29,9 @@ static const struct flash_info st_parts[] = {
{ "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128,
SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256,
SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512,
@@ -59,6 +61,8 @@ static const struct flash_info st_parts[] = {
SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048,
SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6 |
NO_CHIP_ERASE) },
{ "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048,
SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index f6038d3a3684..55c0c508464b 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -21,10 +21,6 @@
#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
#define SFDP_SIGNATURE 0x50444653U
-#define SFDP_JESD216_MAJOR 1
-#define SFDP_JESD216_MINOR 0
-#define SFDP_JESD216A_MINOR 5
-#define SFDP_JESD216B_MINOR 6
struct sfdp_header {
u32 signature; /* Ox50444653U <=> "SFDP" */
@@ -437,7 +433,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
struct sfdp_bfpt bfpt;
size_t len;
int i, cmd, err;
- u32 addr;
+ u32 addr, val;
u16 half;
u8 erase_mask;
@@ -460,6 +456,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
/* Number of address bytes. */
switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
+ case BFPT_DWORD1_ADDRESS_BYTES_3_OR_4:
nor->addr_width = 3;
break;
@@ -472,21 +469,21 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
}
/* Flash Memory Density (in bits). */
- params->size = bfpt.dwords[BFPT_DWORD(2)];
- if (params->size & BIT(31)) {
- params->size &= ~BIT(31);
+ val = bfpt.dwords[BFPT_DWORD(2)];
+ if (val & BIT(31)) {
+ val &= ~BIT(31);
/*
* Prevent overflows on params->size. Anyway, a NOR of 2^64
* bits is unlikely to exist so this error probably means
* the BFPT we are reading is corrupted/wrong.
*/
- if (params->size > 63)
+ if (val > 63)
return -EINVAL;
- params->size = 1ULL << params->size;
+ params->size = 1ULL << val;
} else {
- params->size++;
+ params->size = val + 1;
}
params->size >>= 3; /* Convert to bytes. */
@@ -548,15 +545,15 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
SNOR_ERASE_TYPE_MASK;
/* Stop here if not JESD216 rev A or later. */
- if (bfpt_header->length < BFPT_DWORD_MAX)
+ if (bfpt_header->length == BFPT_DWORD_MAX_JESD216)
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
params);
/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
- params->page_size = bfpt.dwords[BFPT_DWORD(11)];
- params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
- params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
- params->page_size = 1U << params->page_size;
+ val = bfpt.dwords[BFPT_DWORD(11)];
+ val &= BFPT_DWORD11_PAGE_SIZE_MASK;
+ val >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
+ params->page_size = 1U << val;
/* Quad Enable Requirements. */
switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
@@ -604,6 +601,11 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
return -EINVAL;
}
+ /* Stop here if not JESD216 rev C or later. */
+ if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
+ return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+ params);
+
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
}
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
index e0a8ded04890..7f9846b3a1ad 100644
--- a/drivers/mtd/spi-nor/sfdp.h
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -7,14 +7,20 @@
#ifndef __LINUX_MTD_SFDP_H
#define __LINUX_MTD_SFDP_H
+/* SFDP revisions */
+#define SFDP_JESD216_MAJOR 1
+#define SFDP_JESD216_MINOR 0
+#define SFDP_JESD216A_MINOR 5
+#define SFDP_JESD216B_MINOR 6
+
/* Basic Flash Parameter Table */
/*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs.
* They are indexed from 1 but C arrays are indexed from 0.
*/
#define BFPT_DWORD(i) ((i) - 1)
-#define BFPT_DWORD_MAX 16
+#define BFPT_DWORD_MAX 20
struct sfdp_bfpt {
u32 dwords[BFPT_DWORD_MAX];
@@ -22,6 +28,7 @@ struct sfdp_bfpt {
/* The first version of JESD216 defined only 9 DWORDs. */
#define BFPT_DWORD_MAX_JESD216 9
+#define BFPT_DWORD_MAX_JESD216B 16
/* 1st DWORD. */
#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 6756202ace4b..e550cd5c9d3a 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -8,6 +8,27 @@
#include "core.h"
+static int
+s25fs_s_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ /*
+ * The S25FS-S chip family reports 512-byte pages in BFPT but
+ * in reality the write buffer still wraps at the safe default
+ * of 256 bytes. Overwrite the page size advertised by BFPT
+ * to get the writes working.
+ */
+ params->page_size = 256;
+
+ return 0;
+}
+
+static struct spi_nor_fixups s25fs_s_fixups = {
+ .post_bfpt = s25fs_s_post_bfpt_fixups,
+};
+
static const struct flash_info spansion_parts[] = {
/* Spansion/Cypress -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
@@ -22,16 +43,27 @@ static const struct flash_info spansion_parts[] = {
{ "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
USE_CLSR) },
- { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
- { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- USE_CLSR) },
+ { "s25fl256s0", INFO6(0x010219, 0x4d0080, 256 * 1024, 128,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl256s1", INFO6(0x010219, 0x4d0180, 64 * 1024, 512,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
{ "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | USE_CLSR) },
- { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+ { "s25fs128s1", INFO6(0x012018, 0x4d0181, 64 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
+ .fixups = &s25fs_s_fixups, },
+ { "s25fs256s0", INFO6(0x010219, 0x4d0081, 256 * 1024, 128,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
USE_CLSR) },
+ { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR)
+ .fixups = &s25fs_s_fixups, },
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
{ "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
@@ -70,6 +102,8 @@ static const struct flash_info spansion_parts[] = {
{ "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_4B_OPCODES) },
+ { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1,
+ SPI_NOR_NO_ERASE) },
};
static void spansion_post_sfdp_fixups(struct spi_nor *nor)
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 17deabad57e1..5062af10f138 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -8,6 +8,31 @@
#include "core.h"
+static int
+w25q256_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ /*
+ * W25Q256JV supports 4B opcodes but W25Q256FV does not.
+ * Unfortunately, Winbond has re-used the same JEDEC ID for both
+ * variants which prevents us from defining a new entry in the parts
+ * table.
+ * To differentiate between W25Q256JV and W25Q256FV check SFDP header
+ * version: only JV has JESD216A compliant structure (version 5).
+ */
+ if (bfpt_header->major == SFDP_JESD216_MAJOR &&
+ bfpt_header->minor == SFDP_JESD216A_MINOR)
+ nor->flags |= SNOR_F_4B_OPCODES;
+
+ return 0;
+}
+
+static struct spi_nor_fixups w25q256_fixups = {
+ .post_bfpt = w25q256_post_bfpt_fixups,
+};
+
static const struct flash_info winbond_parts[] = {
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
{ "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
@@ -53,8 +78,8 @@ static const struct flash_info winbond_parts[] = {
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &w25q256_fixups },
{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,