diff options
Diffstat (limited to 'drivers/mtd/spi-nor/controllers')
-rw-r--r-- | drivers/mtd/spi-nor/controllers/Kconfig | 75 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/Makefile | 8 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/aspeed-smc.c | 910 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/cadence-quadspi.c | 1540 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/hisi-sfc.c | 499 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/intel-spi-pci.c | 94 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/intel-spi-platform.c | 54 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/intel-spi.c | 960 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/intel-spi.h | 21 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/controllers/nxp-spifi.c | 486 |
10 files changed, 4647 insertions, 0 deletions
diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig new file mode 100644 index 000000000000..10b86660b821 --- /dev/null +++ b/drivers/mtd/spi-nor/controllers/Kconfig @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on ARCH_ASPEED || COMPILE_TEST + depends on HAS_IOMEM && OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips, + and support for the SPI flash memory controller (SPI) for + the host firmware. The implementation only supports SPI NOR. + +config SPI_CADENCE_QUADSPI + tristate "Cadence Quad SPI controller" + depends on OF && (ARM || ARM64 || COMPILE_TEST) + help + Enable support for the Cadence Quad SPI Flash controller. + + Cadence QSPI is a specialized controller for connecting an SPI + Flash over 1/2/4-bit wide bus. Enable this option if you have a + device with a Cadence QSPI controller and want to access the + Flash as an MTD device. + +config SPI_HISI_SFC + tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)" + depends on ARCH_HISI || COMPILE_TEST + depends on HAS_IOMEM + help + This enables support for HiSilicon FMC SPI-NOR flash controller. + +config SPI_NXP_SPIFI + tristate "NXP SPI Flash Interface (SPIFI)" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + depends on HAS_IOMEM + help + Enable support for the NXP LPC SPI Flash Interface controller. + + SPIFI is a specialized controller for connecting serial SPI + Flash. Enable this option if you have a device with a SPIFI + controller and want to access the Flash as a mtd device. + +config SPI_INTEL_SPI + tristate + +config SPI_INTEL_SPI_PCI + tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)" + depends on X86 && PCI + select SPI_INTEL_SPI + help + This enables PCI support for the Intel PCH/PCU SPI controller in + master mode. This controller is present in modern Intel hardware + and is used to hold BIOS and other persistent settings. Using + this driver it is possible to upgrade BIOS directly from Linux. + + Say N here unless you know what you are doing. Overwriting the + SPI flash may render the system unbootable. + + To compile this driver as a module, choose M here: the module + will be called intel-spi-pci. + +config SPI_INTEL_SPI_PLATFORM + tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)" + depends on X86 + select SPI_INTEL_SPI + help + This enables platform support for the Intel PCH/PCU SPI + controller in master mode. This controller is present in modern + Intel hardware and is used to hold BIOS and other persistent + settings. Using this driver it is possible to upgrade BIOS + directly from Linux. + + Say N here unless you know what you are doing. Overwriting the + SPI flash may render the system unbootable. + + To compile this driver as a module, choose M here: the module + will be called intel-spi-platform. diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile new file mode 100644 index 000000000000..46e6fbe586e3 --- /dev/null +++ b/drivers/mtd/spi-nor/controllers/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o +obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o +obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o +obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o +obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o +obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o +obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o diff --git a/drivers/mtd/spi-nor/controllers/aspeed-smc.c b/drivers/mtd/spi-nor/controllers/aspeed-smc.c new file mode 100644 index 000000000000..ae85e4c0e114 --- /dev/null +++ b/drivers/mtd/spi-nor/controllers/aspeed-smc.c @@ -0,0 +1,910 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * ASPEED Static Memory Controller driver + * + * Copyright (c) 2015-2016, IBM Corporation. + */ + +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/sizes.h> +#include <linux/sysfs.h> + +#define DEVICE_NAME "aspeed-smc" + +/* + * The driver only support SPI flash + */ +enum aspeed_smc_flash_type { + smc_type_nor = 0, + smc_type_nand = 1, + smc_type_spi = 2, +}; + +struct aspeed_smc_chip; + +struct aspeed_smc_info { + u32 maxsize; /* maximum size of chip window */ + u8 nce; /* number of chip enables */ + bool hastype; /* flash type field exists in config reg */ + u8 we0; /* shift for write enable bit for CE0 */ + u8 ctl0; /* offset in regs of ctl for CE0 */ + + void (*set_4b)(struct aspeed_smc_chip *chip); +}; + +static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip); +static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip); + +static const struct aspeed_smc_info fmc_2400_info = { + .maxsize = 64 * 1024 * 1024, + .nce = 5, + .hastype = true, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +static const struct aspeed_smc_info spi_2400_info = { + .maxsize = 64 * 1024 * 1024, + .nce = 1, + .hastype = false, + .we0 = 0, + .ctl0 = 0x04, + .set_4b = aspeed_smc_chip_set_4b_spi_2400, +}; + +static const struct aspeed_smc_info fmc_2500_info = { + .maxsize = 256 * 1024 * 1024, + .nce = 3, + .hastype = true, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +static const struct aspeed_smc_info spi_2500_info = { + .maxsize = 128 * 1024 * 1024, + .nce = 2, + .hastype = false, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +enum aspeed_smc_ctl_reg_value { + smc_base, /* base value without mode for other commands */ + smc_read, /* command reg for (maybe fast) reads */ + smc_write, /* command reg for writes */ + smc_max, +}; + +struct aspeed_smc_controller; + +struct aspeed_smc_chip { + int cs; + struct aspeed_smc_controller *controller; + void __iomem *ctl; /* control register */ + void __iomem *ahb_base; /* base of chip window */ + u32 ahb_window_size; /* chip mapping window size */ + u32 ctl_val[smc_max]; /* control settings */ + enum aspeed_smc_flash_type type; /* what type of flash */ + struct spi_nor nor; +}; + +struct aspeed_smc_controller { + struct device *dev; + + struct mutex mutex; /* controller access mutex */ + const struct aspeed_smc_info *info; /* type info of controller */ + void __iomem *regs; /* controller registers */ + void __iomem *ahb_base; /* per-chip windows resource */ + u32 ahb_window_size; /* full mapping window size */ + + struct aspeed_smc_chip *chips[]; /* pointers to attached chips */ +}; + +/* + * SPI Flash Configuration Register (AST2500 SPI) + * or + * Type setting Register (AST2500 FMC). + * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the + * driver does not support it. + */ +#define CONFIG_REG 0x0 +#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */ + +#define CONFIG_CE2_WRITE BIT(18) +#define CONFIG_CE1_WRITE BIT(17) +#define CONFIG_CE0_WRITE BIT(16) + +#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */ +#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */ +#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */ + +/* + * CE Control Register + */ +#define CE_CONTROL_REG 0x4 + +/* + * CEx Control Register + */ +#define CONTROL_AAF_MODE BIT(31) +#define CONTROL_IO_MODE_MASK GENMASK(30, 28) +#define CONTROL_IO_DUAL_DATA BIT(29) +#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28)) +#define CONTROL_IO_QUAD_DATA BIT(30) +#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28)) +#define CONTROL_CE_INACTIVE_SHIFT 24 +#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \ + CONTROL_CE_INACTIVE_SHIFT) +/* 0 = 16T ... 15 = 1T T=HCLK */ +#define CONTROL_COMMAND_SHIFT 16 +#define CONTROL_DUMMY_COMMAND_OUT BIT(15) +#define CONTROL_IO_DUMMY_HI BIT(14) +#define CONTROL_IO_DUMMY_HI_SHIFT 14 +#define CONTROL_CLK_DIV4 BIT(13) /* others */ +#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */ +#define CONTROL_RW_MERGE BIT(12) +#define CONTROL_IO_DUMMY_LO_SHIFT 6 +#define CONTROL_IO_DUMMY_LO GENMASK(7, \ + CONTROL_IO_DUMMY_LO_SHIFT) +#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \ + CONTROL_IO_DUMMY_LO) +#define CONTROL_IO_DUMMY_SET(dummy) \ + (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \ + (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT)) + +#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8 +#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \ + CONTROL_CLOCK_FREQ_SEL_SHIFT) +#define CONTROL_LSB_FIRST BIT(5) +#define CONTROL_CLOCK_MODE_3 BIT(4) +#define CONTROL_IN_DUAL_DATA BIT(3) +#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2) +#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0) +#define CONTROL_COMMAND_MODE_NORMAL 0 +#define CONTROL_COMMAND_MODE_FREAD 1 +#define CONTROL_COMMAND_MODE_WRITE 2 +#define CONTROL_COMMAND_MODE_USER 3 + +#define CONTROL_KEEP_MASK \ + (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \ + CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) + +/* + * The Segment Register uses a 8MB unit to encode the start address + * and the end address of the mapping window of a flash SPI slave : + * + * | byte 1 | byte 2 | byte 3 | byte 4 | + * +--------+--------+--------+--------+ + * | end | start | 0 | 0 | + */ +#define SEGMENT_ADDR_REG0 0x30 +#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23) +#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23) +#define SEGMENT_ADDR_VALUE(start, end) \ + (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24)) +#define SEGMENT_ADDR_REG(controller, cs) \ + ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4) + +/* + * In user mode all data bytes read or written to the chip decode address + * range are transferred to or from the SPI bus. The range is treated as a + * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned + * to its size. The address within the multiple 8kB range is ignored when + * sending bytes to the SPI bus. + * + * On the arm architecture, as of Linux version 4.3, memcpy_fromio and + * memcpy_toio on little endian targets use the optimized memcpy routines + * that were designed for well behavied memory storage. These routines + * have a stutter if the source and destination are not both word aligned, + * once with a duplicate access to the source after aligning to the + * destination to a word boundary, and again with a duplicate access to + * the source when the final byte count is not word aligned. + * + * When writing or reading the fifo this stutter discards data or sends + * too much data to the fifo and can not be used by this driver. + * + * While the low level io string routines that implement the insl family do + * the desired accesses and memory increments, the cross architecture io + * macros make them essentially impossible to use on a memory mapped address + * instead of a a token from the call to iomap of an io port. + * + * These fifo routines use readl and friends to a constant io port and update + * the memory buffer pointer and count via explicit code. The final updates + * to len are optimistically suppressed. + */ +static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + ioread32_rep(src, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + ioread8_rep(src, (u8 *)buf + offset, len); + return 0; +} + +static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf, + size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + iowrite32_rep(dst, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + iowrite8_rep(dst, (const u8 *)buf + offset, len); + return 0; +} + +static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip) +{ + return BIT(chip->controller->info->we0 + chip->cs); +} + +static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CONFIG_REG); + + if (reg & aspeed_smc_chip_write_bit(chip)) + return; + + dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n", + controller->regs + CONFIG_REG, reg); + reg |= aspeed_smc_chip_write_bit(chip); + writel(reg, controller->regs + CONFIG_REG); +} + +static void aspeed_smc_start_user(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + u32 ctl = chip->ctl_val[smc_base]; + + /* + * When the chip is controlled in user mode, we need write + * access to send the opcodes to it. So check the config. + */ + aspeed_smc_chip_check_config(chip); + + ctl |= CONTROL_COMMAND_MODE_USER | + CONTROL_CE_STOP_ACTIVE_CONTROL; + writel(ctl, chip->ctl); + + ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL; + writel(ctl, chip->ctl); +} + +static void aspeed_smc_stop_user(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + + u32 ctl = chip->ctl_val[smc_read]; + u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER | + CONTROL_CE_STOP_ACTIVE_CONTROL; + + writel(ctl2, chip->ctl); /* stop user CE control */ + writel(ctl, chip->ctl); /* default to fread or read mode */ +} + +static int aspeed_smc_prep(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + + mutex_lock(&chip->controller->mutex); + return 0; +} + +static void aspeed_smc_unprep(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + + mutex_unlock(&chip->controller->mutex); +} + +static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, + size_t len) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_smc_read_from_ahb(buf, chip->ahb_base, len); + aspeed_smc_stop_user(nor); + return 0; +} + +static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf, + size_t len) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_smc_write_to_ahb(chip->ahb_base, buf, len); + aspeed_smc_stop_user(nor); + return 0; +} + +static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr) +{ + struct aspeed_smc_chip *chip = nor->priv; + __be32 temp; + u32 cmdaddr; + + switch (nor->addr_width) { + default: + WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n", + nor->addr_width); + fallthrough; + case 3: + cmdaddr = addr & 0xFFFFFF; + cmdaddr |= cmd << 24; + + temp = cpu_to_be32(cmdaddr); + aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); + break; + case 4: + temp = cpu_to_be32(addr); + aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1); + aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); + break; + } +} + +static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from, + size_t len, u_char *read_buf) +{ + struct aspeed_smc_chip *chip = nor->priv; + int i; + u8 dummy = 0xFF; + + aspeed_smc_start_user(nor); + aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from); + for (i = 0; i < chip->nor.read_dummy / 8; i++) + aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); + + aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len); + aspeed_smc_stop_user(nor); + return len; +} + +static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to, + size_t len, const u_char *write_buf) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to); + aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len); + aspeed_smc_stop_user(nor); + return len; +} + +static int aspeed_smc_unregister(struct aspeed_smc_controller *controller) +{ + struct aspeed_smc_chip *chip; + int n; + + for (n = 0; n < controller->info->nce; n++) { + chip = controller->chips[n]; + if (chip) + mtd_device_unregister(&chip->nor.mtd); + } + + return 0; +} + +static int aspeed_smc_remove(struct platform_device *dev) +{ + return aspeed_smc_unregister(platform_get_drvdata(dev)); +} + +static const struct of_device_id aspeed_smc_matches[] = { + { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info }, + { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info }, + { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info }, + { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info }, + { } +}; +MODULE_DEVICE_TABLE(of, aspeed_smc_matches); + +/* + * Each chip has a mapping window defined by a segment address + * register defining a start and an end address on the AHB bus. These + * addresses can be configured to fit the chip size and offer a + * contiguous memory region across chips. For the moment, we only + * check that each chip segment is valid. + */ +static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, + struct resource *res) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 offset = 0; + u32 reg; + + if (controller->info->nce > 1) { + reg = readl(SEGMENT_ADDR_REG(controller, chip->cs)); + + if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg)) + return NULL; + + offset = SEGMENT_ADDR_START(reg) - res->start; + } + + return controller->ahb_base + offset; +} + +static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller) +{ + u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0)); + + return SEGMENT_ADDR_START(seg0_val); +} + +static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start, + u32 size) +{ + struct aspeed_smc_controller *controller = chip->controller; + void __iomem *seg_reg; + u32 seg_oldval, seg_newval, ahb_base_phy, end; + + ahb_base_phy = aspeed_smc_ahb_base_phy(controller); + + seg_reg = SEGMENT_ADDR_REG(controller, cs); + seg_oldval = readl(seg_reg); + + /* + * If the chip size is not specified, use the default segment + * size, but take into account the possible overlap with the + * previous segment + */ + if (!size) + size = SEGMENT_ADDR_END(seg_oldval) - start; + + /* + * The segment cannot exceed the maximum window size of the + * controller. + */ + if (start + size > ahb_base_phy + controller->ahb_window_size) { + size = ahb_base_phy + controller->ahb_window_size - start; + dev_warn(chip->nor.dev, "CE%d window resized to %dMB", + cs, size >> 20); + } + + end = start + size; + seg_newval = SEGMENT_ADDR_VALUE(start, end); + writel(seg_newval, seg_reg); + + /* + * Restore default value if something goes wrong. The chip + * might have set some bogus value and we would loose access + * to the chip. + */ + if (seg_newval != readl(seg_reg)) { + dev_err(chip->nor.dev, "CE%d window invalid", cs); + writel(seg_oldval, seg_reg); + start = SEGMENT_ADDR_START(seg_oldval); + end = SEGMENT_ADDR_END(seg_oldval); + size = end - start; + } + + dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB", + cs, start, end, size >> 20); + + return size; +} + +/* + * The segment register defines the mapping window on the AHB bus and + * it needs to be configured depending on the chip size. The segment + * register of the following CE also needs to be tuned in order to + * provide a contiguous window across multiple chips. + * + * This is expected to be called in increasing CE order + */ +static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 ahb_base_phy, start; + u32 size = chip->nor.mtd.size; + + /* + * Each controller has a chip size limit for direct memory + * access + */ + if (size > controller->info->maxsize) + size = controller->info->maxsize; + + /* + * The AST2400 SPI controller only handles one chip and does + * not have segment registers. Let's use the chip size for the + * AHB window. + */ + if (controller->info == &spi_2400_info) + goto out; + + /* + * The AST2500 SPI controller has a HW bug when the CE0 chip + * size reaches 128MB. Enforce a size limit of 120MB to + * prevent the controller from using bogus settings in the + * segment register. + */ + if (chip->cs == 0 && controller->info == &spi_2500_info && + size == SZ_128M) { + size = 120 << 20; + dev_info(chip->nor.dev, + "CE%d window resized to %dMB (AST2500 HW quirk)", + chip->cs, size >> 20); + } + + ahb_base_phy = aspeed_smc_ahb_base_phy(controller); + + /* + * As a start address for the current segment, use the default + * start address if we are handling CE0 or use the previous + * segment ending address + */ + if (chip->cs) { + u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1)); + + start = SEGMENT_ADDR_END(prev); + } else { + start = ahb_base_phy; + } + + size = chip_set_segment(chip, chip->cs, start, size); + + /* Update chip base address on the AHB bus */ + chip->ahb_base = controller->ahb_base + (start - ahb_base_phy); + + /* + * Now, make sure the next segment does not overlap with the + * current one we just configured, even if there is no + * available chip. That could break access in Command Mode. + */ + if (chip->cs < controller->info->nce - 1) + chip_set_segment(chip, chip->cs + 1, start + size, 0); + +out: + if (size < chip->nor.mtd.size) + dev_warn(chip->nor.dev, + "CE%d window too small for chip %dMB", + chip->cs, (u32)chip->nor.mtd.size >> 20); + + return size; +} + +static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CONFIG_REG); + + reg |= aspeed_smc_chip_write_bit(chip); + writel(reg, controller->regs + CONFIG_REG); +} + +static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + chip->type = type; + + reg = readl(controller->regs + CONFIG_REG); + reg &= ~(3 << (chip->cs * 2)); + reg |= chip->type << (chip->cs * 2); + writel(reg, controller->regs + CONFIG_REG); +} + +/* + * The first chip of the AST2500 FMC flash controller is strapped by + * hardware, or autodetected, but other chips need to be set. Enforce + * the 4B setting for all chips. + */ +static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CE_CONTROL_REG); + reg |= 1 << chip->cs; + writel(reg, controller->regs + CE_CONTROL_REG); +} + +/* + * The AST2400 SPI flash controller does not have a CE Control + * register. It uses the CE0 control register to set 4Byte mode at the + * controller level. + */ +static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip) +{ + chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B; + chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B; +} + +static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip, + struct resource *res) +{ + struct aspeed_smc_controller *controller = chip->controller; + const struct aspeed_smc_info *info = controller->info; + u32 reg, base_reg; + + /* + * Always turn on the write enable bit to allow opcodes to be + * sent in user mode. + */ + aspeed_smc_chip_enable_write(chip); + + /* The driver only supports SPI type flash */ + if (info->hastype) + aspeed_smc_chip_set_type(chip, smc_type_spi); + + /* + * Configure chip base address in memory + */ + chip->ahb_base = aspeed_smc_chip_base(chip, res); + if (!chip->ahb_base) { + dev_warn(chip->nor.dev, "CE%d window closed", chip->cs); + return -EINVAL; + } + + /* + * Get value of the inherited control register. U-Boot usually + * does some timing calibration on the FMC chip, so it's good + * to keep them. In the future, we should handle calibration + * from Linux. + */ + reg = readl(chip->ctl); + dev_dbg(controller->dev, "control register: %08x\n", reg); + + base_reg = reg & CONTROL_KEEP_MASK; + if (base_reg != reg) { + dev_dbg(controller->dev, + "control register changed to: %08x\n", + base_reg); + } + chip->ctl_val[smc_base] = base_reg; + + /* + * Retain the prior value of the control register as the + * default if it was normal access mode. Otherwise start with + * the sanitized base value set to read mode. + */ + if ((reg & CONTROL_COMMAND_MODE_MASK) == + CONTROL_COMMAND_MODE_NORMAL) + chip->ctl_val[smc_read] = reg; + else + chip->ctl_val[smc_read] = chip->ctl_val[smc_base] | + CONTROL_COMMAND_MODE_NORMAL; + + dev_dbg(controller->dev, "default control register: %08x\n", + chip->ctl_val[smc_read]); + return 0; +} + +static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + const struct aspeed_smc_info *info = controller->info; + u32 cmd; + + if (chip->nor.addr_width == 4 && info->set_4b) + info->set_4b(chip); + + /* This is for direct AHB access when using Command Mode. */ + chip->ahb_window_size = aspeed_smc_chip_set_segment(chip); + + /* + * base mode has not been optimized yet. use it for writes. + */ + chip->ctl_val[smc_write] = chip->ctl_val[smc_base] | + chip->nor.program_opcode << CONTROL_COMMAND_SHIFT | + CONTROL_COMMAND_MODE_WRITE; + + dev_dbg(controller->dev, "write control register: %08x\n", + chip->ctl_val[smc_write]); + + /* + * TODO: Adjust clocks if fast read is supported and interpret + * SPI-NOR flags to adjust controller settings. + */ + if (chip->nor.read_proto == SNOR_PROTO_1_1_1) { + if (chip->nor.read_dummy == 0) + cmd = CONTROL_COMMAND_MODE_NORMAL; + else + cmd = CONTROL_COMMAND_MODE_FREAD; + } else { + dev_err(chip->nor.dev, "unsupported SPI read mode\n"); + return -EINVAL; + } + + chip->ctl_val[smc_read] |= cmd | + CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8); + + dev_dbg(controller->dev, "base control register: %08x\n", + chip->ctl_val[smc_read]); + return 0; +} + +static const struct spi_nor_controller_ops aspeed_smc_controller_ops = { + .prepare = aspeed_smc_prep, + .unprepare = aspeed_smc_unprep, + .read_reg = aspeed_smc_read_reg, + .write_reg = aspeed_smc_write_reg, + .read = aspeed_smc_read_user, + .write = aspeed_smc_write_user, +}; + +static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, + struct device_node *np, struct resource *r) +{ + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; + const struct aspeed_smc_info *info = controller->info; + struct device *dev = controller->dev; + struct device_node *child; + unsigned int cs; + int ret = -ENODEV; + + for_each_available_child_of_node(np, child) { + struct aspeed_smc_chip *chip; + struct spi_nor *nor; + struct mtd_info *mtd; + + /* This driver does not support NAND or NOR flash devices. */ + if (!of_device_is_compatible(child, "jedec,spi-nor")) + continue; + + ret = of_property_read_u32(child, "reg", &cs); + if (ret) { + dev_err(dev, "Couldn't not read chip select.\n"); + break; + } + + if (cs >= info->nce) { + dev_err(dev, "Chip select %d out of range.\n", + cs); + ret = -ERANGE; + break; + } + + if (controller->chips[cs]) { + dev_err(dev, "Chip select %d already in use by %s\n", + cs, dev_name(controller->chips[cs]->nor.dev)); + ret = -EBUSY; + break; + } + + chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) { + ret = -ENOMEM; + break; + } + + chip->controller = controller; + chip->ctl = controller->regs + info->ctl0 + cs * 4; + chip->cs = cs; + + nor = &chip->nor; + mtd = &nor->mtd; + + nor->dev = dev; + nor->priv = chip; + spi_nor_set_flash_node(nor, child); + nor->controller_ops = &aspeed_smc_controller_ops; + + ret = aspeed_smc_chip_setup_init(chip, r); + if (ret) + break; + + /* + * TODO: Add support for Dual and Quad SPI protocols + * attach when board support is present as determined + * by of property. + */ + ret = spi_nor_scan(nor, NULL, &hwcaps); + if (ret) + break; + + ret = aspeed_smc_chip_setup_finish(chip); + if (ret) + break; + + ret = mtd_device_register(mtd, NULL, 0); + if (ret) + break; + + controller->chips[cs] = chip; + } + + if (ret) { + of_node_put(child); + aspeed_smc_unregister(controller); + } + + return ret; +} + +static int aspeed_smc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct aspeed_smc_controller *controller; + const struct of_device_id *match; + const struct aspeed_smc_info *info; + struct resource *res; + int ret; + + match = of_match_device(aspeed_smc_matches, &pdev->dev); + if (!match || !match->data) + return -ENODEV; + info = match->data; + + controller = devm_kzalloc(&pdev->dev, + struct_size(controller, chips, info->nce), + GFP_KERNEL); + if (!controller) + return -ENOMEM; + controller->info = info; + controller->dev = dev; + + mutex_init(&controller->mutex); + platform_set_drvdata(pdev, controller); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + controller->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(controller->regs)) + return PTR_ERR(controller->regs); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + controller->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(controller->ahb_base)) + return PTR_ERR(controller->ahb_base); + + controller->ahb_window_size = resource_size(res); + + ret = aspeed_smc_setup_flash(controller, np, res); + if (ret) + dev_err(dev, "Aspeed SMC probe failed %d\n", ret); + + return ret; +} + +static struct platform_driver aspeed_smc_driver = { + .probe = aspeed_smc_probe, + .remove = aspeed_smc_remove, + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_smc_matches, + } +}; + +module_platform_driver(aspeed_smc_driver); + +MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); +MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/controllers/cadence-quadspi.c b/drivers/mtd/spi-nor/controllers/cadence-quadspi.c new file mode 100644 index 000000000000..494dcab4aaaa --- /dev/null +++ b/drivers/mtd/spi-nor/controllers/cadence-quadspi.c @@ -0,0 +1,1540 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Cadence QSPI Controller + * + * Copyright Altera Corporation (C) 2012-2014. All rights reserved. + */ +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> +#include <linux/sched.h> +#include <linux/spi/spi.h> +#include <linux/timer.h> + +#define CQSPI_NAME "cadence-qspi" +#define CQSPI_MAX_CHIPSELECT 16 + +/* Quirks */ +#define CQSPI_NEEDS_WR_DELAY BIT(0) + +/* Capabilities mask */ +#define CQSPI_BASE_HWCAPS_MASK \ |