summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/denali.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/denali.c')
-rw-r--r--drivers/mtd/nand/denali.c247
1 files changed, 113 insertions, 134 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 4633f094c510..d5276218945f 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
#include <linux/wait.h>
#include <linux/mutex.h>
#include <linux/slab.h>
@@ -44,16 +45,16 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
/* We define a macro here that combines all interrupts this driver uses into
* a single constant value, for convenience. */
-#define DENALI_IRQ_ALL (INTR_STATUS0__DMA_CMD_COMP | \
- INTR_STATUS0__ECC_TRANSACTION_DONE | \
- INTR_STATUS0__ECC_ERR | \
- INTR_STATUS0__PROGRAM_FAIL | \
- INTR_STATUS0__LOAD_COMP | \
- INTR_STATUS0__PROGRAM_COMP | \
- INTR_STATUS0__TIME_OUT | \
- INTR_STATUS0__ERASE_FAIL | \
- INTR_STATUS0__RST_COMP | \
- INTR_STATUS0__ERASE_COMP)
+#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \
+ INTR_STATUS__ECC_TRANSACTION_DONE | \
+ INTR_STATUS__ECC_ERR | \
+ INTR_STATUS__PROGRAM_FAIL | \
+ INTR_STATUS__LOAD_COMP | \
+ INTR_STATUS__PROGRAM_COMP | \
+ INTR_STATUS__TIME_OUT | \
+ INTR_STATUS__ERASE_FAIL | \
+ INTR_STATUS__RST_COMP | \
+ INTR_STATUS__ERASE_COMP)
/* indicates whether or not the internal value for the flash bank is
* valid or not */
@@ -95,30 +96,6 @@ static const struct pci_device_id denali_pci_ids[] = {
{ /* end: all zeroes */ }
};
-
-/* these are static lookup tables that give us easy access to
- * registers in the NAND controller.
- */
-static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
- INTR_STATUS1,
- INTR_STATUS2,
- INTR_STATUS3};
-
-static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0,
- DEVICE_RESET__BANK1,
- DEVICE_RESET__BANK2,
- DEVICE_RESET__BANK3};
-
-static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT,
- INTR_STATUS1__TIME_OUT,
- INTR_STATUS2__TIME_OUT,
- INTR_STATUS3__TIME_OUT};
-
-static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
- INTR_STATUS1__RST_COMP,
- INTR_STATUS2__RST_COMP,
- INTR_STATUS3__RST_COMP};
-
/* forward declarations */
static void clear_interrupts(struct denali_nand_info *denali);
static uint32_t wait_for_irq(struct denali_nand_info *denali,
@@ -180,19 +157,17 @@ static void read_status(struct denali_nand_info *denali)
static void reset_bank(struct denali_nand_info *denali)
{
uint32_t irq_status = 0;
- uint32_t irq_mask = reset_complete[denali->flash_bank] |
- operation_timeout[denali->flash_bank];
- int bank = 0;
+ uint32_t irq_mask = INTR_STATUS__RST_COMP |
+ INTR_STATUS__TIME_OUT;
clear_interrupts(denali);
- bank = device_reset_banks[denali->flash_bank];
- iowrite32(bank, denali->flash_reg + DEVICE_RESET);
+ iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET);
irq_status = wait_for_irq(denali, irq_mask);
- if (irq_status & operation_timeout[denali->flash_bank])
- dev_err(&denali->dev->dev, "reset bank failed.\n");
+ if (irq_status & INTR_STATUS__TIME_OUT)
+ dev_err(denali->dev, "reset bank failed.\n");
}
/* Reset the flash controller */
@@ -200,29 +175,28 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
{
uint32_t i;
- dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
- for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
- iowrite32(reset_complete[i] | operation_timeout[i],
- denali->flash_reg + intr_status_addresses[i]);
+ for (i = 0 ; i < denali->max_banks; i++)
+ iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+ denali->flash_reg + INTR_STATUS(i));
- for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
- iowrite32(device_reset_banks[i],
- denali->flash_reg + DEVICE_RESET);
+ for (i = 0 ; i < denali->max_banks; i++) {
+ iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
while (!(ioread32(denali->flash_reg +
- intr_status_addresses[i]) &
- (reset_complete[i] | operation_timeout[i])))
+ INTR_STATUS(i)) &
+ (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT)))
cpu_relax();
- if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
- operation_timeout[i])
- dev_dbg(&denali->dev->dev,
+ if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
+ INTR_STATUS__TIME_OUT)
+ dev_dbg(denali->dev,
"NAND Reset operation timed out on bank %d\n", i);
}
- for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
- iowrite32(reset_complete[i] | operation_timeout[i],
- denali->flash_reg + intr_status_addresses[i]);
+ for (i = 0; i < denali->max_banks; i++)
+ iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+ denali->flash_reg + INTR_STATUS(i));
return PASS;
}
@@ -254,7 +228,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
uint16_t acc_clks;
uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
- dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
en_lo = CEIL_DIV(Trp[mode], CLK_X);
@@ -291,7 +265,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
acc_clks++;
if ((data_invalid - acc_clks * CLK_X) < 2)
- dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n",
+ dev_warn(denali->dev, "%s, Line %d: Warning!\n",
__FILE__, __LINE__);
addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
@@ -419,7 +393,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
#endif
break;
default:
- dev_warn(&denali->dev->dev,
+ dev_warn(denali->dev,
"Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
"Will use default parameter values instead.\n",
device_id);
@@ -431,17 +405,17 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
*/
static void find_valid_banks(struct denali_nand_info *denali)
{
- uint32_t id[LLD_MAX_FLASH_BANKS];
+ uint32_t id[denali->max_banks];
int i;
denali->total_used_banks = 1;
- for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < denali->max_banks; i++) {
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
index_addr_read_data(denali,
(uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
- dev_dbg(&denali->dev->dev,
+ dev_dbg(denali->dev,
"Return 1st ID for bank[%d]: %x\n", i, id[i]);
if (i == 0) {
@@ -461,16 +435,27 @@ static void find_valid_banks(struct denali_nand_info *denali)
* Multichip support is not enabled.
*/
if (denali->total_used_banks != 1) {
- dev_err(&denali->dev->dev,
+ dev_err(denali->dev,
"Sorry, Intel CE4100 only supports "
"a single NAND device.\n");
BUG();
}
}
- dev_dbg(&denali->dev->dev,
+ dev_dbg(denali->dev,
"denali->total_used_banks: %d\n", denali->total_used_banks);
}
+/*
+ * Use the configuration feature register to determine the maximum number of
+ * banks that the hardware supports.
+ */
+static void detect_max_banks(struct denali_nand_info *denali)
+{
+ uint32_t features = ioread32(denali->flash_reg + FEATURES);
+
+ denali->max_banks = 2 << (features & FEATURES__N_BANKS);
+}
+
static void detect_partition_feature(struct denali_nand_info *denali)
{
/* For MRST platform, denali->fwblks represent the
@@ -480,15 +465,15 @@ static void detect_partition_feature(struct denali_nand_info *denali)
* blocks it can't touch.
* */
if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
- if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
- PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
+ if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) &
+ PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) {
denali->fwblks =
- ((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
- MIN_MAX_BANK_1__MIN_VALUE) *
+ ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) &
+ MIN_MAX_BANK__MIN_VALUE) *
denali->blksperchip)
+
- (ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
- MIN_BLK_ADDR_1__VALUE);
+ (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) &
+ MIN_BLK_ADDR__VALUE);
} else
denali->fwblks = SPECTRA_START_BLOCK;
} else
@@ -501,7 +486,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
uint32_t id_bytes[5], addr;
uint8_t i, maf_id, device_id;
- dev_dbg(&denali->dev->dev,
+ dev_dbg(denali->dev,
"%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
@@ -530,7 +515,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
get_hynix_nand_para(denali, device_id);
}
- dev_info(&denali->dev->dev,
+ dev_info(denali->dev,
"Dump timing register values:"
"acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
"we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
@@ -560,7 +545,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
static void denali_set_intr_modes(struct denali_nand_info *denali,
uint16_t INT_ENABLE)
{
- dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n",
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
__FILE__, __LINE__, __func__);
if (INT_ENABLE)
@@ -580,6 +565,7 @@ static inline bool is_flash_bank_valid(int flash_bank)
static void denali_irq_init(struct denali_nand_info *denali)
{
uint32_t int_mask = 0;
+ int i;
/* Disable global interrupts */
denali_set_intr_modes(denali, false);
@@ -587,10 +573,8 @@ static void denali_irq_init(struct denali_nand_info *denali)
int_mask = DENALI_IRQ_ALL;
/* Clear all status bits */
- iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS0);
- iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS1);
- iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS2);
- iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS3);
+ for (i = 0; i < denali->max_banks; ++i)
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i));
denali_irq_enable(denali, int_mask);
}
@@ -604,10 +588,10 @@ static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
static void denali_irq_enable(struct denali_nand_info *denali,
uint32_t int_mask)
{
- iowrite32(int_mask, denali->flash_reg + INTR_EN0);
- iowrite32(int_mask, denali->flash_reg + INTR_EN1);
- iowrite32(int_mask, denali->flash_reg + INTR_EN2);
- iowrite32(int_mask, denali->flash_reg + INTR_EN3);
+ int i;
+
+ for (i = 0; i < denali->max_banks; ++i)
+ iowrite32(int_mask, denali->flash_reg + INTR_EN(i));
}
/* This function only returns when an interrupt that this driver cares about
@@ -624,7 +608,7 @@ static inline void clear_interrupt(struct denali_nand_info *denali,
{
uint32_t intr_status_reg = 0;
- intr_status_reg = intr_status_addresses[denali->flash_bank];
+ intr_status_reg = INTR_STATUS(denali->flash_bank);
iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
}
@@ -645,7 +629,7 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali)
{
uint32_t intr_status_reg = 0;
- intr_status_reg = intr_status_addresses[denali->flash_bank];
+ intr_status_reg = INTR_STATUS(denali->flash_bank);
return ioread32(denali->flash_reg + intr_status_reg);
}
@@ -754,7 +738,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
irq_mask = 0;
if (op == DENALI_READ)
- irq_mask = INTR_STATUS0__LOAD_COMP;
+ irq_mask = INTR_STATUS__LOAD_COMP;
else if (op == DENALI_WRITE)
irq_mask = 0;
else
@@ -800,7 +784,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- dev_err(&denali->dev->dev,
+ dev_err(denali->dev,
"cmd, page, addr on timeout "
"(0x%x, 0x%x, 0x%x)\n",
cmd, denali->page, addr);
@@ -861,8 +845,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
- INTR_STATUS0__PROGRAM_FAIL;
+ uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP |
+ INTR_STATUS__PROGRAM_FAIL;
int status = 0;
denali->page = page;
@@ -875,11 +859,11 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- dev_err(&denali->dev->dev, "OOB write failed\n");
+ dev_err(denali->dev, "OOB write failed\n");
status = -EIO;
}
} else {
- dev_err(&denali->dev->dev, "unable to send pipeline command\n");
+ dev_err(denali->dev, "unable to send pipeline command\n");
status = -EIO;
}
return status;
@@ -889,7 +873,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- uint32_t irq_mask = INTR_STATUS0__LOAD_COMP,
+ uint32_t irq_mask = INTR_STATUS__LOAD_COMP,
irq_status = 0, addr = 0x0, cmd = 0x0;
denali->page = page;
@@ -904,7 +888,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0)
- dev_err(&denali->dev->dev, "page on OOB timeout %d\n",
+ dev_err(denali->dev, "page on OOB timeout %d\n",
denali->page);
/* We set the device back to MAIN_ACCESS here as I observed
@@ -944,7 +928,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
{
bool check_erased_page = false;
- if (irq_status & INTR_STATUS0__ECC_ERR) {
+ if (irq_status & INTR_STATUS__ECC_ERR) {
/* read the ECC errors. we'll ignore them for now */
uint32_t err_address = 0, err_correction_info = 0;
uint32_t err_byte = 0, err_sector = 0, err_device = 0;
@@ -995,7 +979,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
* for a while for this interrupt
* */
while (!(read_interrupt_status(denali) &
- INTR_STATUS0__ECC_TRANSACTION_DONE))
+ INTR_STATUS__ECC_TRANSACTION_DONE))
cpu_relax();
clear_interrupts(denali);
denali_set_intr_modes(denali, true);
@@ -1045,14 +1029,13 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, bool raw_xfer)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- struct pci_dev *pci_dev = denali->dev;
dma_addr_t addr = denali->buf.dma_buf;
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
- INTR_STATUS0__PROGRAM_FAIL;
+ uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
+ INTR_STATUS__PROGRAM_FAIL;
/* if it is a raw xfer, we want to disable ecc, and send
* the spare area.
@@ -1071,7 +1054,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
mtd->oobsize);
}
- pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);
+ dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE);
clear_interrupts(denali);
denali_enable_dma(denali, true);
@@ -1082,16 +1065,16 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
irq_status = wait_for_irq(denali, irq_mask);
if (irq_status == 0) {
- dev_err(&denali->dev->dev,
+ dev_err(denali->dev,
"timeout on write_page (type = %d)\n",
raw_xfer);
denali->status =
- (irq_status & INTR_STATUS0__PROGRAM_FAIL) ?
+ (irq_status & INTR_STATUS__PROGRAM_FAIL) ?
NAND_STATUS_FAIL : PASS;
}
denali_enable_dma(denali, false);
- pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);
+ dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
}
/* NAND core entry points */
@@ -1139,18 +1122,17 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- struct pci_dev *pci_dev = denali->dev;
dma_addr_t addr = denali->buf.dma_buf;
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
- INTR_STATUS0__ECC_ERR;
+ uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE |
+ INTR_STATUS__ECC_ERR;
bool check_erased_page = false;
if (page != denali->page) {
- dev_err(&denali->dev->dev, "IN %s: page %d is not"
+ dev_err(denali->dev, "IN %s: page %d is not"
" equal to denali->page %d, investigate!!",
__func__, page, denali->page);
BUG();
@@ -1159,7 +1141,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
setup_ecc_for_xfer(denali, true, false);
denali_enable_dma(denali, true);
- pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
clear_interrupts(denali);
denali_setup_dma(denali, DENALI_READ);
@@ -1167,7 +1149,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
- pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
memcpy(buf, denali->buf.buf, mtd->writesize);
@@ -1192,16 +1174,15 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- struct pci_dev *pci_dev = denali->dev;
dma_addr_t addr = denali->buf.dma_buf;
size_t size = denali->mtd.writesize + denali->mtd.oobsize;
uint32_t irq_status = 0;
- uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
+ uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP;
if (page != denali->page) {
- dev_err(&denali->dev->dev, "IN %s: page %d is not"
+ dev_err(denali->dev, "IN %s: page %d is not"
" equal to denali->page %d, investigate!!",
__func__, page, denali->page);
BUG();
@@ -1210,7 +1191,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
setup_ecc_for_xfer(denali, false, true);
denali_enable_dma(denali, true);
- pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
clear_interrupts(denali);
denali_setup_dma(denali, DENALI_READ);
@@ -1218,7 +1199,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
/* wait for operation to complete */
irq_status = wait_for_irq(denali, irq_mask);
- pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+ dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
denali_enable_dma(denali, false);
@@ -1271,10 +1252,10 @@ static void denali_erase(struct mtd_info *mtd, int page)
index_addr(denali, (uint32_t)cmd, 0x1);
/* wait for erase to complete or failure to occur */
- irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
- INTR_STATUS0__ERASE_FAIL);
+ irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
+ INTR_STATUS__ERASE_FAIL);
- denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ?
+ denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ?
NAND_STATUS_FAIL : PASS;
}
@@ -1330,7 +1311,7 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dev_err(&denali->dev->dev,
+ dev_err(denali->dev,
"denali_ecc_calculate called unexpectedly\n");
BUG();
return -EIO;
@@ -1340,7 +1321,7 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dev_err(&denali->dev->dev,
+ dev_err(denali->dev,
"denali_ecc_correct called unexpectedly\n");
BUG();
return -EIO;
@@ -1349,7 +1330,7 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
- dev_err(&denali->dev->dev,
+ dev_err(denali->dev,
"denali_ecc_hwctl called unexpectedly\n");
BUG();
}
@@ -1375,6 +1356,7 @@ static void denali_hw_init(struct denali_nand_info *denali)
/* Should set value for these registers when init */
iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
iowrite32(1, denali->flash_reg + ECC_ENABLE);
+ detect_max_banks(denali);
denali_nand_timing_set(denali);
denali_irq_init(denali);
}
@@ -1484,24 +1466,22 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
}
/* Is 32-bit DMA supported? */
- ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
-
+ ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "Spectra: no usable DMA configuration\n");
goto failed_enable_dev;
}
- denali->buf.dma_buf =
- pci_map_single(dev, denali->buf.buf,
- DENALI_BUF_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ denali->buf.dma_buf = dma_map_single(&dev->dev, denali->buf.buf,
+ DENALI_BUF_SIZE,
+ DMA_BIDIRECTIONAL);
- if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) {
+ if (dma_mapping_error(&dev->dev, denali->buf.dma_buf)) {
dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n");
goto failed_enable_dev;
}
pci_set_master(dev);
- denali->dev = dev;
+ denali->dev = &dev->dev;
denali->mtd.dev.parent = &dev->dev;
ret = pci_request_regions(dev, DENALI_NAND_NAME);
@@ -1554,7 +1534,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* scan for NAND devices attached to the controller
* this is the first stage in a two step process to register
* with the nand subsystem */
- if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) {
+ if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) {
ret = -ENXIO;
goto failed_req_irq;
}
@@ -1664,7 +1644,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto failed_req_irq;
}
- ret = add_mtd_device(&denali->mtd);
+ ret = mtd_device_register(&denali->mtd, NULL, 0);
if (ret) {
dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n",
ret);
@@ -1681,8 +1661,8 @@ failed_remap_reg:
failed_req_regions:
pci_release_regions(dev);
failed_dma_map:
- pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ DMA_BIDIRECTIONAL);
failed_enable_dev:
pci_disable_device(dev);
failed_alloc_memery:
@@ -1696,7 +1676,7 @@ static void denali_pci_remove(struct pci_dev *dev)
struct denali_nand_info *denali = pci_get_drvdata(dev);
nand_release(&denali->mtd);
- del_mtd_device(&denali->mtd);
+ mtd_device_unregister(&denali->mtd);
denali_irq_cleanup(dev->irq, denali);
@@ -1704,8 +1684,8 @@ static void denali_pci_remove(struct pci_dev *dev)
iounmap(denali->flash_mem);
pci_release_regions(dev);
pci_disable_device(dev);
- pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ DMA_BIDIRECTIONAL);
pci_set_drvdata(dev, NULL);
kfree(denali);
}
@@ -1721,8 +1701,7 @@ static struct pci_driver denali_pci_driver = {
static int __devinit denali_init(void)
{
- printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n",
- __DATE__, __TIME__);
+ printk(KERN_INFO "Spectra MTD driver\n");
return pci_register_driver(&denali_pci_driver);
}