diff options
Diffstat (limited to 'drivers/mmc/host')
24 files changed, 1759 insertions, 692 deletions
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 3be8b94d7914..d88219e1d86e 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -238,6 +238,17 @@ config MMC_SDHCI_S3C_DMA YMMV. +config MMC_SDHCI_BCM2835 + tristate "SDHCI platform support for the BCM2835 SD/MMC Controller" + depends on ARCH_BCM2835 + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the BCM2835 SD/MMC controller. If you have a BCM2835 + platform with SD or MMC devices, say Y or M here. + + If unsure, say N. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP @@ -361,6 +372,13 @@ config MMC_DAVINCI If you have an DAVINCI board with a Multimedia Card slot, say Y or M here. If unsure, say N. +config MMC_GOLDFISH + tristate "goldfish qemu Multimedia Card Interface support" + depends on GOLDFISH + help + This selects the Goldfish Multimedia card Interface emulation + found on the Goldfish Android virtual device emulation. + config MMC_SPI tristate "MMC/SD/SDIO over SPI" depends on SPI_MASTER && !HIGHMEM && HAS_DMA diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index e4e218c930bd..c380e3cf0a3b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_MSM) += msm_sdcc.o obj-$(CONFIG_MMC_MVSDIO) += mvsdio.o obj-$(CONFIG_MMC_DAVINCI) += davinci_mmc.o +obj-$(CONFIG_MMC_GOLDFISH) += android-goldfish.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o ifeq ($(CONFIG_OF),y) obj-$(CONFIG_MMC_SPI) += of_mmc_spi.o @@ -58,6 +59,7 @@ obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o obj-$(CONFIG_MMC_SDHCI_TEGRA) += sdhci-tegra.o obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o +obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c new file mode 100644 index 000000000000..ef3aef0f376d --- /dev/null +++ b/drivers/mmc/host/android-goldfish.c @@ -0,0 +1,570 @@ +/* + * Copyright 2007, Google Inc. + * Copyright 2012, Intel Inc. + * + * based on omap.c driver, which was + * Copyright (C) 2004 Nokia Corporation + * Written by Tuukka Tikkanen and Juha Yrjölä <juha.yrjola@nokia.com> + * Misc hacks here and there by Tony Lindgren <tony@atomide.com> + * Other hacks (DMA, SD, etc) by David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/major.h> + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/hdreg.h> +#include <linux/kdev_t.h> +#include <linux/blkdev.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> + +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/clk.h> + +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/scatterlist.h> + +#include <asm/types.h> +#include <asm/io.h> +#include <asm/uaccess.h> + +#define DRIVER_NAME "goldfish_mmc" + +#define BUFFER_SIZE 16384 + +#define GOLDFISH_MMC_READ(host, addr) (readl(host->reg_base + addr)) +#define GOLDFISH_MMC_WRITE(host, addr, x) (writel(x, host->reg_base + addr)) + +enum { + /* status register */ + MMC_INT_STATUS = 0x00, + /* set this to enable IRQ */ + MMC_INT_ENABLE = 0x04, + /* set this to specify buffer address */ + MMC_SET_BUFFER = 0x08, + + /* MMC command number */ + MMC_CMD = 0x0C, + + /* MMC argument */ + MMC_ARG = 0x10, + + /* MMC response (or R2 bits 0 - 31) */ + MMC_RESP_0 = 0x14, + + /* MMC R2 response bits 32 - 63 */ + MMC_RESP_1 = 0x18, + + /* MMC R2 response bits 64 - 95 */ + MMC_RESP_2 = 0x1C, + + /* MMC R2 response bits 96 - 127 */ + MMC_RESP_3 = 0x20, + + MMC_BLOCK_LENGTH = 0x24, + MMC_BLOCK_COUNT = 0x28, + + /* MMC state flags */ + MMC_STATE = 0x2C, + + /* MMC_INT_STATUS bits */ + + MMC_STAT_END_OF_CMD = 1U << 0, + MMC_STAT_END_OF_DATA = 1U << 1, + MMC_STAT_STATE_CHANGE = 1U << 2, + MMC_STAT_CMD_TIMEOUT = 1U << 3, + + /* MMC_STATE bits */ + MMC_STATE_INSERTED = 1U << 0, + MMC_STATE_READ_ONLY = 1U << 1, +}; + +/* + * Command types + */ +#define OMAP_MMC_CMDTYPE_BC 0 +#define OMAP_MMC_CMDTYPE_BCR 1 +#define OMAP_MMC_CMDTYPE_AC 2 +#define OMAP_MMC_CMDTYPE_ADTC 3 + + +struct goldfish_mmc_host { + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct mmc_host *mmc; + struct device *dev; + unsigned char id; /* 16xx chips have 2 MMC blocks */ + void __iomem *virt_base; + unsigned int phys_base; + int irq; + unsigned char bus_mode; + unsigned char hw_bus_mode; + + unsigned int sg_len; + unsigned dma_done:1; + unsigned dma_in_use:1; + + void __iomem *reg_base; +}; + +static inline int +goldfish_mmc_cover_is_open(struct goldfish_mmc_host *host) +{ + return 0; +} + +static ssize_t +goldfish_mmc_show_cover_switch(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct goldfish_mmc_host *host = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", goldfish_mmc_cover_is_open(host) ? "open" : + "closed"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, goldfish_mmc_show_cover_switch, NULL); + +static void +goldfish_mmc_start_command(struct goldfish_mmc_host *host, struct mmc_command *cmd) +{ + u32 cmdreg; + u32 resptype; + u32 cmdtype; + + host->cmd = cmd; + + resptype = 0; + cmdtype = 0; + + /* Our hardware needs to know exact type */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: + break; + case MMC_RSP_R1: + case MMC_RSP_R1B: + /* resp 1, 1b, 6, 7 */ + resptype = 1; + break; + case MMC_RSP_R2: + resptype = 2; + break; + case MMC_RSP_R3: + resptype = 3; + break; + default: + dev_err(mmc_dev(host->mmc), + "Invalid response type: %04x\n", mmc_resp_type(cmd)); + break; + } + + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + cmdtype = OMAP_MMC_CMDTYPE_ADTC; + else if (mmc_cmd_type(cmd) == MMC_CMD_BC) + cmdtype = OMAP_MMC_CMDTYPE_BC; + else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) + cmdtype = OMAP_MMC_CMDTYPE_BCR; + else + cmdtype = OMAP_MMC_CMDTYPE_AC; + + cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12); + + if (host->bus_mode == MMC_BUSMODE_OPENDRAIN) + cmdreg |= 1 << 6; + + if (cmd->flags & MMC_RSP_BUSY) + cmdreg |= 1 << 11; + + if (host->data && !(host->data->flags & MMC_DATA_WRITE)) + cmdreg |= 1 << 15; + + GOLDFISH_MMC_WRITE(host, MMC_ARG, cmd->arg); + GOLDFISH_MMC_WRITE(host, MMC_CMD, cmdreg); +} + +static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, + struct mmc_data *data) +{ + if (host->dma_in_use) { + enum dma_data_direction dma_data_dir; + + if (data->flags & MMC_DATA_WRITE) + dma_data_dir = DMA_TO_DEVICE; + else + dma_data_dir = DMA_FROM_DEVICE; + + if (dma_data_dir == DMA_FROM_DEVICE) { + /* + * We don't really have DMA, so we need + * to copy from our platform driver buffer + */ + uint8_t *dest = (uint8_t *)sg_virt(data->sg); + memcpy(dest, host->virt_base, data->sg->length); + } + host->data->bytes_xfered += data->sg->length; + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len, + dma_data_dir); + } + + host->data = NULL; + host->sg_len = 0; + + /* + * NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing + * dozens of requests until the card finishes writing data. + * It'd be cheaper to just wait till an EOFB interrupt arrives... + */ + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + + goldfish_mmc_start_command(host, data->stop); +} + +static void goldfish_mmc_end_of_data(struct goldfish_mmc_host *host, + struct mmc_data *data) +{ + if (!host->dma_in_use) { + goldfish_mmc_xfer_done(host, data); + return; + } + if (host->dma_done) + goldfish_mmc_xfer_done(host, data); +} + +static void goldfish_mmc_cmd_done(struct goldfish_mmc_host *host, + struct mmc_command *cmd) +{ + host->cmd = NULL; + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = + GOLDFISH_MMC_READ(host, MMC_RESP_0); + cmd->resp[2] = + GOLDFISH_MMC_READ(host, MMC_RESP_1); + cmd->resp[1] = + GOLDFISH_MMC_READ(host, MMC_RESP_2); + cmd->resp[0] = + GOLDFISH_MMC_READ(host, MMC_RESP_3); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = + GOLDFISH_MMC_READ(host, MMC_RESP_0); + } + } + + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +static irqreturn_t goldfish_mmc_irq(int irq, void *dev_id) +{ + struct goldfish_mmc_host *host = (struct goldfish_mmc_host *)dev_id; + u16 status; + int end_command = 0; + int end_transfer = 0; + int transfer_error = 0; + int state_changed = 0; + int cmd_timeout = 0; + + while ((status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS)) != 0) { + GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); + + if (status & MMC_STAT_END_OF_CMD) + end_command = 1; + + if (status & MMC_STAT_END_OF_DATA) + end_transfer = 1; + + if (status & MMC_STAT_STATE_CHANGE) + state_changed = 1; + + if (status & MMC_STAT_CMD_TIMEOUT) { + end_command = 0; + cmd_timeout = 1; + } + } + + if (cmd_timeout) { + struct mmc_request *mrq = host->mrq; + mrq->cmd->error = -ETIMEDOUT; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); + } + + if (end_command) + goldfish_mmc_cmd_done(host, host->cmd); + + if (transfer_error) + goldfish_mmc_xfer_done(host, host->data); + else if (end_transfer) { + host->dma_done = 1; + goldfish_mmc_end_of_data(host, host->data); + } else if (host->data != NULL) { + /* + * WORKAROUND -- after porting this driver from 2.6 to 3.4, + * during device initialization, cases where host->data is + * non-null but end_transfer is false would occur. Doing + * nothing in such cases results in no further interrupts, + * and initialization failure. + * TODO -- find the real cause. + */ + host->dma_done = 1; + goldfish_mmc_end_of_data(host, host->data); + } + + if (state_changed) { + u32 state = GOLDFISH_MMC_READ(host, MMC_STATE); + pr_info("%s: Card detect now %d\n", __func__, + (state & MMC_STATE_INSERTED)); + mmc_detect_change(host->mmc, 0); + } + + if (!end_command && !end_transfer && + !transfer_error && !state_changed && !cmd_timeout) { + status = GOLDFISH_MMC_READ(host, MMC_INT_STATUS); + dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status); + if (status != 0) { + GOLDFISH_MMC_WRITE(host, MMC_INT_STATUS, status); + GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, 0); + } + } + + return IRQ_HANDLED; +} + +static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host, + struct mmc_request *req) +{ + struct mmc_data *data = req->data; + int block_size; + unsigned sg_len; + enum dma_data_direction dma_data_dir; + + host->data = data; + if (data == NULL) { + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, 0); + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, 0); + host->dma_in_use = 0; + return; + } + + block_size = data->blksz; + + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_COUNT, data->blocks - 1); + GOLDFISH_MMC_WRITE(host, MMC_BLOCK_LENGTH, block_size - 1); + + /* + * Cope with calling layer confusion; it issues "single + * block" writes using multi-block scatterlists. + */ + sg_len = (data->blocks == 1) ? 1 : data->sg_len; + + if (data->flags & MMC_DATA_WRITE) + dma_data_dir = DMA_TO_DEVICE; + else + dma_data_dir = DMA_FROM_DEVICE; + + host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + sg_len, dma_data_dir); + host->dma_done = 0; + host->dma_in_use = 1; + + if (dma_data_dir == DMA_TO_DEVICE) { + /* + * We don't really have DMA, so we need to copy to our + * platform driver buffer + */ + const uint8_t *src = (uint8_t *)sg_virt(data->sg); + memcpy(host->virt_base, src, data->sg->length); + } +} + +static void goldfish_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct goldfish_mmc_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + + host->mrq = req; + goldfish_mmc_prepare_data(host, req); + goldfish_mmc_start_command(host, req->cmd); + + /* + * This is to avoid accidentally being detected as an SDIO card + * in mmc_attach_sdio(). + */ + if (req->cmd->opcode == SD_IO_SEND_OP_COND && + req->cmd->flags == (MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR)) + req->cmd->error = -EINVAL; +} + +static void goldfish_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct goldfish_mmc_host *host = mmc_priv(mmc); + + host->bus_mode = ios->bus_mode; + host->hw_bus_mode = host->bus_mode; +} + +static int goldfish_mmc_get_ro(struct mmc_host *mmc) +{ + uint32_t state; + struct goldfish_mmc_host *host = mmc_priv(mmc); + + state = GOLDFISH_MMC_READ(host, MMC_STATE); + return ((state & MMC_STATE_READ_ONLY) != 0); +} + +static const struct mmc_host_ops goldfish_mmc_ops = { + .request = goldfish_mmc_request, + .set_ios = goldfish_mmc_set_ios, + .get_ro = goldfish_mmc_get_ro, +}; + +static int goldfish_mmc_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct goldfish_mmc_host *host = NULL; + struct resource *res; + int ret = 0; + int irq; + dma_addr_t buf_addr; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + mmc = mmc_alloc_host(sizeof(struct goldfish_mmc_host), &pdev->dev); + if (mmc == NULL) { + ret = -ENOMEM; + goto err_alloc_host_failed; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + + pr_err("mmc: Mapping %lX to %lX\n", (long)res->start, (long)res->end); + host->reg_base = ioremap(res->start, res->end - res->start + 1); + if (host->reg_base == NULL) { + ret = -ENOMEM; + goto ioremap_failed; + } + host->virt_base = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE, + &buf_addr, GFP_KERNEL); + + if (host->virt_base == 0) { + ret = -ENOMEM; + goto dma_alloc_failed; + } + host->phys_base = buf_addr; + + host->id = pdev->id; + host->irq = irq; + + mmc->ops = &goldfish_mmc_ops; + mmc->f_min = 400000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + + /* Use scatterlist DMA to reduce per-transfer costs. + * NOTE max_seg_size assumption that small blocks aren't + * normally used (except e.g. for reading SD registers). + */ + mmc->max_segs = 32; + mmc->max_blk_size = 2048; /* MMC_BLOCK_LENGTH is 11 bits (+1) */ + mmc->max_blk_count = 2048; /* MMC_BLOCK_COUNT is 11 bits (+1) */ + mmc->max_req_size = BUFFER_SIZE; + mmc->max_seg_size = mmc->max_req_size; + + ret = request_irq(host->irq, goldfish_mmc_irq, 0, DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "Failed IRQ Adding goldfish MMC\n"); + goto err_request_irq_failed; + } + + host->dev = &pdev->dev; + platform_set_drvdata(pdev, host); + + ret = device_create_file(&pdev->dev, &dev_attr_cover_switch); + if (ret) + dev_warn(mmc_dev(host->mmc), + "Unable to create sysfs attributes\n"); + + GOLDFISH_MMC_WRITE(host, MMC_SET_BUFFER, host->phys_base); + GOLDFISH_MMC_WRITE(host, MMC_INT_ENABLE, + MMC_STAT_END_OF_CMD | MMC_STAT_END_OF_DATA | + MMC_STAT_STATE_CHANGE | MMC_STAT_CMD_TIMEOUT); + + mmc_add_host(mmc); + return 0; + +err_request_irq_failed: + dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, + host->phys_base); +dma_alloc_failed: + iounmap(host->reg_base); +ioremap_failed: + mmc_free_host(host->mmc); +err_alloc_host_failed: + return ret; +} + +static int goldfish_mmc_remove(struct platform_device *pdev) +{ + struct goldfish_mmc_host *host = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + BUG_ON(host == NULL); + + mmc_remove_host(host->mmc); + free_irq(host->irq, host); + dma_free_coherent(&pdev->dev, BUFFER_SIZE, host->virt_base, host->phys_base); + iounmap(host->reg_base); + mmc_free_host(host->mmc); + return 0; +} + +static struct platform_driver goldfish_mmc_driver = { + .probe = goldfish_mmc_probe, + .remove = goldfish_mmc_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +module_platform_driver(goldfish_mmc_driver); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 4d50da618166..72fd0f2c9013 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -175,16 +175,6 @@ static int dw_mci_exynos_setup_bus(struct dw_mci *host, } } - gpio = of_get_named_gpio(slot_np, "wp-gpios", 0); - if (gpio_is_valid(gpio)) { - if (devm_gpio_request(host->dev, gpio, "dw-mci-wp")) - dev_info(host->dev, "gpio [%d] request failed\n", - gpio); - } else { - dev_info(host->dev, "wp gpio not available"); - host->pdata->quirks |= DW_MCI_QUIRK_NO_WRITE_PROTECT; - } - if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION) return 0; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 323c5022c2ca..60063ccb4c4b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -34,6 +34,7 @@ #include <linux/regulator/consumer.h> #include <linux/workqueue.h> #include <linux/of.h> +#include <linux/of_gpio.h> #include "dw_mmc.h" @@ -74,6 +75,8 @@ struct idmac_desc { * struct dw_mci_slot - MMC slot state * @mmc: The mmc_host representing this slot. * @host: The MMC controller this slot is using. + * @quirks: Slot-level quirks (DW_MCI_SLOT_QUIRK_XXX) + * @wp_gpio: If gpio_is_valid() we'll use this to read write protect. * @ctype: Card type for this slot. * @mrq: mmc_request currently being processed or waiting to be * processed, or NULL when the slot is idle. @@ -88,6 +91,9 @@ struct dw_mci_slot { struct mmc_host *mmc; struct dw_mci *host; + int quirks; + int wp_gpio; + u32 ctype; struct mmc_request *mrq; @@ -825,10 +831,12 @@ static int dw_mci_get_ro(struct mmc_host *mmc) struct dw_mci_board *brd = slot->host->pdata; /* Use platform get_ro function, else try on board write protect */ - if (brd->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT) + if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) read_only = 0; else if (brd->get_ro) read_only = brd->get_ro(slot->id); + else if (gpio_is_valid(slot->wp_gpio)) + read_only = gpio_get_value(slot->wp_gpio); else read_only = mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0; @@ -1785,6 +1793,30 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) return NULL; } +static struct dw_mci_of_slot_quirks { + char *quirk; + int id; +} of_slot_quirks[] = { + { + .quirk = "disable-wp", + .id = DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT, + }, +}; + +static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) +{ + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); + int quirks = 0; + int idx; + + /* get quirks */ + for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++) + if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) + quirks |= of_slot_quirks[idx].id; + + return quirks; +} + /* find out bus-width for a given slot */ static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) { @@ -1799,7 +1831,34 @@ static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) " as 1\n"); return bus_wd; } + +/* find the write protect gpio for a given slot; or -1 if none specified */ +static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot) +{ + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); + int gpio; + + if (!np) + return -EINVAL; + + gpio = of_get_named_gpio(np, "wp-gpios", 0); + + /* Having a missing entry is valid; return silently */ + if (!gpio_is_valid(gpio)) + return -EINVAL; + + if (devm_gpio_request(dev, gpio, "dw-mci-wp")) { + dev_warn(dev, "gpio [%d] request failed\n", gpio); + return -EINVAL; + } + + return gpio; +} #else /* CONFIG_OF */ +static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) +{ + return 0; +} static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) { return 1; @@ -1808,6 +1867,10 @@ static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) { return NULL; } +static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot) +{ + return -EINVAL; +} #endif /* CONFIG_OF */ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) @@ -1828,6 +1891,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) slot->host = host; host->slot[id] = slot; + slot->quirks = dw_mci_of_get_slot_quirks(host->dev, slot->id); + mmc->ops = &dw_mci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); mmc->f_max = host->bus_hz; @@ -1923,6 +1988,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) else clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); + slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id); + mmc_add_host(mmc); #if defined(CONFIG_DEBUG_FS) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index f8dd36102949..145cdaf000d1 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -21,7 +21,11 @@ #include <linux/irq.h> #include <linux/clk.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_irq.h> #include <linux/mmc/host.h> +#include <linux/mmc/slot-gpio.h> +#include <linux/pinctrl/consumer.h> #include <asm/sizes.h> #include <asm/unaligned.h> @@ -51,8 +55,6 @@ struct mvsd_host { struct mmc_host *mmc; struct device *dev; struct clk *clk; - int gpio_card_detect; - int gpio_write_protect; }; #define mvsd_write(offs, val) writel(val, iobase + (offs)) @@ -538,13 +540,6 @@ static void mvsd_timeout_timer(unsigned long data) mmc_request_done(host->mmc, mrq); } -static irqreturn_t mvsd_card_detect_irq(int irq, void *dev) -{ - struct mvsd_host *host = dev; - mmc_detect_change(host->mmc, msecs_to_jiffies(100)); - return IRQ_HANDLED; -} - static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable) { struct mvsd_host *host = mmc_priv(mmc); @@ -564,20 +559,6 @@ static void mvsd_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_unlock_irqrestore(&host->lock, flags); } -static int mvsd_get_ro(struct mmc_host *mmc) -{ - struct mvsd_host *host = mmc_priv(mmc); - - if (host->gpio_write_protect) - return gpio_get_value(host->gpio_write_protect); - - /* - * Board doesn't support read only detection; let the mmc core - * decide what to do. - */ - return -ENOSYS; -} - static void mvsd_power_up(struct mvsd_host *host) { void __iomem *iobase = host->base; @@ -674,7 +655,7 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) static const struct mmc_host_ops mvsd_ops = { .request = mvsd_request, - .get_ro = mvsd_get_ro, + .get_ro = mmc_gpio_get_ro, .set_ios = mvsd_set_ios, .enable_sdio_irq = mvsd_enable_sdio_irq, }; @@ -703,17 +684,18 @@ mv_conf_mbus_windows(struct mvsd_host *host, static int __init mvsd_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct mmc_host *mmc = NULL; struct mvsd_host *host = NULL; - const struct mvsdio_platform_data *mvsd_data; const struct mbus_dram_target_info *dram; struct resource *r; int ret, irq; + int gpio_card_detect, gpio_write_protect; + struct pinctrl *pinctrl; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - mvsd_data = pdev->dev.platform_data; - if (!r || irq < 0 || !mvsd_data) + if (!r || irq < 0) return -ENXIO; mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); @@ -725,8 +707,43 @@ static int __init mvsd_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->dev = &pdev->dev; - host->base_clock = mvsd_data->clock / 2; - host->clk = ERR_PTR(-EINVAL); + + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, "no pins associated\n"); + + /* + * Some non-DT platforms do not pass a clock, and the clock + * frequency is passed through platform_data. On DT platforms, + * a clock must always be passed, even if there is no gatable + * clock associated to the SDIO interface (it can simply be a + * fixed rate clock). + */ + host->clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(host->clk)) + clk_prepare_enable(host->clk); + + if (np) { + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "DT platforms must have a clock associated\n"); + ret = -EINVAL; + goto out; + } + + host->base_clock = clk_get_rate(host->clk) / 2; + gpio_card_detect = of_get_named_gpio(np, "cd-gpios", 0); + gpio_write_protect = of_get_named_gpio(np, "wp-gpios", 0); + } else { + const struct mvsdio_platform_data *mvsd_data; + mvsd_data = pdev->dev.platform_data; + if (!mvsd_data) { + ret = -ENXIO; + goto out; + } + host->base_clock = mvsd_data->clock / 2; + gpio_card_detect = mvsd_data->gpio_card_detect; + gpio_write_protect = mvsd_data->gpio_write_protect; + } mmc->ops = &mvsd_ops; @@ -765,43 +782,14 @@ static int __init mvsd_probe(struct platform_device *pdev) goto out; } - /* Not all platforms can gate the clock, so it is not - an error if the clock does not exists. */ - host->clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(host->clk)) - clk_prepare_enable(host->clk); - - if (mvsd_data->gpio_card_detect) { - ret = devm_gpio_request_one(&pdev->dev, - mvsd_data->gpio_card_detect, - GPIOF_IN, DRIVER_NAME " cd"); - if (ret == 0) { - irq = gpio_to_irq(mvsd_data->gpio_card_detect); - ret = devm_request_irq(&pdev->dev, irq, - mvsd_card_detect_irq, - IRQ_TYPE_EDGE_RISING | - IRQ_TYPE_EDGE_FALLING, - DRIVER_NAME " cd", host); - if (ret == 0) - host->gpio_card_detect = - mvsd_data->gpio_card_detect; - else - devm_gpio_free(&pdev->dev, - mvsd_data->gpio_card_detect); - } - } - if (!host->gpio_card_detect) + if (gpio_is_valid(gpio_card_detect)) { + ret = mmc_gpio_request_cd(mmc, gpio_card_detect); + if (ret) + goto out; + } else mmc->caps |= MMC_CAP_NEEDS_POLL; - if (mvsd_data->gpio_write_protect) { - ret = devm_gpio_request_one(&pdev->dev, - mvsd_data->gpio_write_protect, - GPIOF_IN, DRIVER_NAME " wp"); - if (ret == 0) { - host->gpio_write_protect = - mvsd_data->gpio_write_protect; - } - } + mmc_gpio_request_ro(mmc, gpio_write_protect); setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host); platform_set_drvdata(pdev, mmc); @@ -811,15 +799,17 @@ static int __init |