summaryrefslogtreecommitdiffstats
path: root/drivers/memory
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/memory')
-rw-r--r--drivers/memory/Makefile1
-rw-r--r--drivers/memory/brcmstb_dpfe.c722
-rw-r--r--drivers/memory/omap-gpmc.c54
3 files changed, 747 insertions, 30 deletions
diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
index 470b93e3858d..929a601d4cd1 100644
--- a/drivers/memory/Makefile
+++ b/drivers/memory/Makefile
@@ -9,6 +9,7 @@ endif
obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o
+obj-$(CONFIG_ARCH_BRCMSTB) += brcmstb_dpfe.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
new file mode 100644
index 000000000000..0a7bdbed3a6f
--- /dev/null
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -0,0 +1,722 @@
+/*
+ * DDR PHY Front End (DPFE) driver for Broadcom set top box SoCs
+ *
+ * Copyright (c) 2017 Broadcom
+ *
+ * Released under the GPLv2 only.
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/*
+ * This driver provides access to the DPFE interface of Broadcom STB SoCs.
+ * The firmware running on the DCPU inside the DDR PHY can provide current
+ * information about the system's RAM, for instance the DRAM refresh rate.
+ * This can be used as an indirect indicator for the DRAM's temperature.
+ * Slower refresh rate means cooler RAM, higher refresh rate means hotter
+ * RAM.
+ *
+ * Throughout the driver, we use readl_relaxed() and writel_relaxed(), which
+ * already contain the appropriate le32_to_cpu()/cpu_to_le32() calls.
+ *
+ * Note regarding the loading of the firmware image: we use be32_to_cpu()
+ * and le_32_to_cpu(), so we can support the following four cases:
+ * - LE kernel + LE firmware image (the most common case)
+ * - LE kernel + BE firmware image
+ * - BE kernel + LE firmware image
+ * - BE kernel + BE firmware image
+ *
+ * The DPCU always runs in big endian mode. The firwmare image, however, can
+ * be in either format. Also, communication between host CPU and DCPU is
+ * always in little endian.
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#define DRVNAME "brcmstb-dpfe"
+#define FIRMWARE_NAME "dpfe.bin"
+
+/* DCPU register offsets */
+#define REG_DCPU_RESET 0x0
+#define REG_TO_DCPU_MBOX 0x10
+#define REG_TO_HOST_MBOX 0x14
+
+/* Message RAM */
+#define DCPU_MSG_RAM(x) (0x100 + (x) * sizeof(u32))
+
+/* DRAM Info Offsets & Masks */
+#define DRAM_INFO_INTERVAL 0x0
+#define DRAM_INFO_MR4 0x4
+#define DRAM_INFO_ERROR 0x8
+#define DRAM_INFO_MR4_MASK 0xff
+
+/* DRAM MR4 Offsets & Masks */
+#define DRAM_MR4_REFRESH 0x0 /* Refresh rate */
+#define DRAM_MR4_SR_ABORT 0x3 /* Self Refresh Abort */
+#define DRAM_MR4_PPRE 0x4 /* Post-package repair entry/exit */
+#define DRAM_MR4_TH_OFFS 0x5 /* Thermal Offset; vendor specific */
+#define DRAM_MR4_TUF 0x7 /* Temperature Update Flag */
+
+#define DRAM_MR4_REFRESH_MASK 0x7
+#define DRAM_MR4_SR_ABORT_MASK 0x1
+#define DRAM_MR4_PPRE_MASK 0x1
+#define DRAM_MR4_TH_OFFS_MASK 0x3
+#define DRAM_MR4_TUF_MASK 0x1
+
+/* DRAM Vendor Offsets & Masks */
+#define DRAM_VENDOR_MR5 0x0
+#define DRAM_VENDOR_MR6 0x4
+#define DRAM_VENDOR_MR7 0x8
+#define DRAM_VENDOR_MR8 0xc
+#define DRAM_VENDOR_ERROR 0x10
+#define DRAM_VENDOR_MASK 0xff
+
+/* Reset register bits & masks */
+#define DCPU_RESET_SHIFT 0x0
+#define DCPU_RESET_MASK 0x1
+#define DCPU_CLK_DISABLE_SHIFT 0x2
+
+/* DCPU return codes */
+#define DCPU_RET_ERROR_BIT BIT(31)
+#define DCPU_RET_SUCCESS 0x1
+#define DCPU_RET_ERR_HEADER (DCPU_RET_ERROR_BIT | BIT(0))
+#define DCPU_RET_ERR_INVAL (DCPU_RET_ERROR_BIT | BIT(1))
+#define DCPU_RET_ERR_CHKSUM (DCPU_RET_ERROR_BIT | BIT(2))
+#define DCPU_RET_ERR_COMMAND (DCPU_RET_ERROR_BIT | BIT(3))
+/* This error code is not firmware defined and only used in the driver. */
+#define DCPU_RET_ERR_TIMEDOUT (DCPU_RET_ERROR_BIT | BIT(4))
+
+/* Firmware magic */
+#define DPFE_BE_MAGIC 0xfe1010fe
+#define DPFE_LE_MAGIC 0xfe0101fe
+
+/* Error codes */
+#define ERR_INVALID_MAGIC -1
+#define ERR_INVALID_SIZE -2
+#define ERR_INVALID_CHKSUM -3
+
+/* Message types */
+#define DPFE_MSG_TYPE_COMMAND 1
+#define DPFE_MSG_TYPE_RESPONSE 2
+
+#define DELAY_LOOP_MAX 200000
+
+enum dpfe_msg_fields {
+ MSG_HEADER,
+ MSG_COMMAND,
+ MSG_ARG_COUNT,
+ MSG_ARG0,
+ MSG_CHKSUM,
+ MSG_FIELD_MAX /* Last entry */
+};
+
+enum dpfe_commands {
+ DPFE_CMD_GET_INFO,
+ DPFE_CMD_GET_REFRESH,
+ DPFE_CMD_GET_VENDOR,
+ DPFE_CMD_MAX /* Last entry */
+};
+
+struct dpfe_msg {
+ u32 header;
+ u32 command;
+ u32 arg_count;
+ u32 arg0;
+ u32 chksum; /* This is the sum of all other entries. */
+};
+
+/*
+ * Format of the binary firmware file:
+ *
+ * entry
+ * 0 header
+ * value: 0xfe0101fe <== little endian
+ * 0xfe1010fe <== big endian
+ * 1 sequence:
+ * [31:16] total segments on this build
+ * [15:0] this segment sequence.
+ * 2 FW version
+ * 3 IMEM byte size
+ * 4 DMEM byte size
+ * IMEM
+ * DMEM
+ * last checksum ==> sum of everything
+ */
+struct dpfe_firmware_header {
+ u32 magic;
+ u32 sequence;
+ u32 version;
+ u32 imem_size;
+ u32 dmem_size;
+};
+
+/* Things we only need during initialization. */
+struct init_data {
+ unsigned int dmem_len;
+ unsigned int imem_len;
+ unsigned int chksum;
+ bool is_big_endian;
+};
+
+/* Things we need for as long as we are active. */
+struct private_data {
+ void __iomem *regs;
+ void __iomem *dmem;
+ void __iomem *imem;
+ struct device *dev;
+ unsigned int index;
+ struct mutex lock;
+};
+
+static const char *error_text[] = {
+ "Success", "Header code incorrect", "Unknown command or argument",
+ "Incorrect checksum", "Malformed command", "Timed out",
+};
+
+/* List of supported firmware commands */
+static const u32 dpfe_commands[DPFE_CMD_MAX][MSG_FIELD_MAX] = {
+ [DPFE_CMD_GET_INFO] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 1,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 1,
+ [MSG_CHKSUM] = 4,
+ },
+ [DPFE_CMD_GET_REFRESH] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 2,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 1,
+ [MSG_CHKSUM] = 5,
+ },
+ [DPFE_CMD_GET_VENDOR] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 2,
+ [MSG_ARG_COUNT] = 1,
+ [MSG_ARG0] = 2,
+ [MSG_CHKSUM] = 6,
+ },
+};
+
+static bool is_dcpu_enabled(void __iomem *regs)
+{
+ u32 val;
+
+ val = readl_relaxed(regs + REG_DCPU_RESET);
+
+ return !(val & DCPU_RESET_MASK);
+}
+
+static void __disable_dcpu(void __iomem *regs)
+{
+ u32 val;
+
+ if (!is_dcpu_enabled(regs))
+ return;
+
+ /* Put DCPU in reset if it's running. */
+ val = readl_relaxed(regs + REG_DCPU_RESET);
+ val |= (1 << DCPU_RESET_SHIFT);
+ writel_relaxed(val, regs + REG_DCPU_RESET);
+}
+
+static void __enable_dcpu(void __iomem *regs)
+{
+ u32 val;
+
+ /* Clear mailbox registers. */
+ writel_relaxed(0, regs + REG_TO_DCPU_MBOX);
+ writel_relaxed(0, regs + REG_TO_HOST_MBOX);
+
+ /* Disable DCPU clock gating */
+ val = readl_relaxed(regs + REG_DCPU_RESET);
+ val &= ~(1 << DCPU_CLK_DISABLE_SHIFT);
+ writel_relaxed(val, regs + REG_DCPU_RESET);
+
+ /* Take DCPU out of reset */
+ val = readl_relaxed(regs + REG_DCPU_RESET);
+ val &= ~(1 << DCPU_RESET_SHIFT);
+ writel_relaxed(val, regs + REG_DCPU_RESET);
+}
+
+static unsigned int get_msg_chksum(const u32 msg[])
+{
+ unsigned int sum = 0;
+ unsigned int i;
+
+ /* Don't include the last field in the checksum. */
+ for (i = 0; i < MSG_FIELD_MAX - 1; i++)
+ sum += msg[i];
+
+ return sum;
+}
+
+static int __send_command(struct private_data *priv, unsigned int cmd,
+ u32 result[])
+{
+ const u32 *msg = dpfe_commands[cmd];
+ void __iomem *regs = priv->regs;
+ unsigned int i, chksum;
+ int ret = 0;
+ u32 resp;
+
+ if (cmd >= DPFE_CMD_MAX)
+ return -1;
+
+ mutex_lock(&priv->lock);
+
+ /* Write command and arguments to message area */
+ for (i = 0; i < MSG_FIELD_MAX; i++)
+ writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i));
+
+ /* Tell DCPU there is a command waiting */
+ writel_relaxed(1, regs + REG_TO_DCPU_MBOX);
+
+ /* Wait for DCPU to process the command */
+ for (i = 0; i < DELAY_LOOP_MAX; i++) {
+ /* Read response code */
+ resp = readl_relaxed(regs + REG_TO_HOST_MBOX);
+ if (resp > 0)
+ break;
+ udelay(5);
+ }
+
+ if (i == DELAY_LOOP_MAX) {
+ resp = (DCPU_RET_ERR_TIMEDOUT & ~DCPU_RET_ERROR_BIT);
+ ret = -ffs(resp);
+ } else {
+ /* Read response data */
+ for (i = 0; i < MSG_FIELD_MAX; i++)
+ result[i] = readl_relaxed(regs + DCPU_MSG_RAM(i));
+ }
+
+ /* Tell DCPU we are done */
+ writel_relaxed(0, regs + REG_TO_HOST_MBOX);
+
+ mutex_unlock(&priv->lock);
+
+ if (ret)
+ return ret;
+
+ /* Verify response */
+ chksum = get_msg_chksum(result);
+ if (chksum != result[MSG_CHKSUM])
+ resp = DCPU_RET_ERR_CHKSUM;
+
+ if (resp != DCPU_RET_SUCCESS) {
+ resp &= ~DCPU_RET_ERROR_BIT;
+ ret = -ffs(resp);
+ }
+
+ return ret;
+}
+
+/* Ensure that the firmware file loaded meets all the requirements. */
+static int __verify_firmware(struct init_data *init,
+ const struct firmware *fw)
+{
+ const struct dpfe_firmware_header *header = (void *)fw->data;
+ unsigned int dmem_size, imem_size, total_size;
+ bool is_big_endian = false;
+ const u32 *chksum_ptr;
+
+ if (header->magic == DPFE_BE_MAGIC)
+ is_big_endian = true;
+ else if (header->magic != DPFE_LE_MAGIC)
+ return ERR_INVALID_MAGIC;
+
+ if (is_big_endian) {
+ dmem_size = be32_to_cpu(header->dmem_size);
+ imem_size = be32_to_cpu(header->imem_size);
+ } else {
+ dmem_size = le32_to_cpu(header->dmem_size);
+ imem_size = le32_to_cpu(header->imem_size);
+ }
+
+ /* Data and instruction sections are 32 bit words. */
+ if ((dmem_size % sizeof(u32)) != 0 || (imem_size % sizeof(u32)) != 0)
+ return ERR_INVALID_SIZE;
+
+ /*
+ * The header + the data section + the instruction section + the
+ * checksum must be equal to the total firmware size.
+ */
+ total_size = dmem_size + imem_size + sizeof(*header) +
+ sizeof(*chksum_ptr);
+ if (total_size != fw->size)
+ return ERR_INVALID_SIZE;
+
+ /* The checksum comes at the very end. */
+ chksum_ptr = (void *)fw->data + sizeof(*header) + dmem_size + imem_size;
+
+ init->is_big_endian = is_big_endian;
+ init->dmem_len = dmem_size;
+ init->imem_len = imem_size;
+ init->chksum = (is_big_endian)
+ ? be32_to_cpu(*chksum_ptr) : le32_to_cpu(*chksum_ptr);
+
+ return 0;
+}
+
+/* Verify checksum by reading back the firmware from co-processor RAM. */
+static int __verify_fw_checksum(struct init_data *init,
+ struct private_data *priv,
+ const struct dpfe_firmware_header *header,
+ u32 checksum)
+{
+ u32 magic, sequence, version, sum;
+ u32 __iomem *dmem = priv->dmem;
+ u32 __iomem *imem = priv->imem;
+ unsigned int i;
+
+ if (init->is_big_endian) {
+ magic = be32_to_cpu(header->magic);
+ sequence = be32_to_cpu(header->sequence);
+ version = be32_to_cpu(header->version);
+ } else {
+ magic = le32_to_cpu(header->magic);
+ sequence = le32_to_cpu(header->sequence);
+ version = le32_to_cpu(header->version);
+ }
+
+ sum = magic + sequence + version + init->dmem_len + init->imem_len;
+
+ for (i = 0; i < init->dmem_len / sizeof(u32); i++)
+ sum += readl_relaxed(dmem + i);
+
+ for (i = 0; i < init->imem_len / sizeof(u32); i++)
+ sum += readl_relaxed(imem + i);
+
+ return (sum == checksum) ? 0 : -1;
+}
+
+static int __write_firmware(u32 __iomem *mem, const u32 *fw,
+ unsigned int size, bool is_big_endian)
+{
+ unsigned int i;
+
+ /* Convert size to 32-bit words. */
+ size /= sizeof(u32);
+
+ /* It is recommended to clear the firmware area first. */
+ for (i = 0; i < size; i++)
+ writel_relaxed(0, mem + i);
+
+ /* Now copy it. */
+ if (is_big_endian) {
+ for (i = 0; i < size; i++)
+ writel_relaxed(be32_to_cpu(fw[i]), mem + i);
+ } else {
+ for (i = 0; i < size; i++)
+ writel_relaxed(le32_to_cpu(fw[i]), mem + i);
+ }
+
+ return 0;
+}
+
+static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
+ struct init_data *init)
+{
+ const struct dpfe_firmware_header *header;
+ unsigned int dmem_size, imem_size;
+ struct device *dev = &pdev->dev;
+ bool is_big_endian = false;
+ struct private_data *priv;
+ const struct firmware *fw;
+ const u32 *dmem, *imem;
+ const void *fw_blob;
+ int ret;
+
+ priv = platform_get_drvdata(pdev);
+
+ /*
+ * Skip downloading the firmware if the DCPU is already running and
+ * responding to commands.
+ */
+ if (is_dcpu_enabled(priv->regs)) {
+ u32 response[MSG_FIELD_MAX];
+
+ ret = __send_command(priv, DPFE_CMD_GET_INFO, response);
+ if (!ret)
+ return 0;
+ }
+
+ ret = request_firmware(&fw, FIRMWARE_NAME, dev);
+ /* request_firmware() prints its own error messages. */
+ if (ret)
+ return ret;
+
+ ret = __verify_firmware(init, fw);
+ if (ret)
+ return -EFAULT;
+
+ __disable_dcpu(priv->regs);
+
+ is_big_endian = init->is_big_endian;
+ dmem_size = init->dmem_len;
+ imem_size = init->imem_len;
+
+ /* At the beginning of the firmware blob is a header. */
+ header = (struct dpfe_firmware_header *)fw->data;
+ /* Void pointer to the beginning of the actual firmware. */
+ fw_blob = fw->data + sizeof(*header);
+ /* IMEM comes right after the header. */
+ imem = fw_blob;
+ /* DMEM follows after IMEM. */
+ dmem = fw_blob + imem_size;
+
+ ret = __write_firmware(priv->dmem, dmem, dmem_size, is_big_endian);
+ if (ret)
+ return ret;
+ ret = __write_firmware(priv->imem, imem, imem_size, is_big_endian);
+ if (ret)
+ return ret;
+
+ ret = __verify_fw_checksum(init, priv, header, init->chksum);
+ if (ret)
+ return ret;
+
+ __enable_dcpu(priv->regs);
+
+ return 0;
+}
+
+static ssize_t generic_show(unsigned int command, u32 response[],
+ struct device *dev, char *buf)
+{
+ struct private_data *priv;
+ int ret;
+
+ priv = dev_get_drvdata(dev);
+ if (!priv)
+ return sprintf(buf, "ERROR: driver private data not set\n");
+
+ ret = __send_command(priv, command, response);
+ if (ret < 0)
+ return sprintf(buf, "ERROR: %s\n", error_text[-ret]);
+
+ return 0;
+}
+
+static ssize_t show_info(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ u32 response[MSG_FIELD_MAX];
+ unsigned int info;
+ int ret;
+
+ ret = generic_show(DPFE_CMD_GET_INFO, response, dev, buf);
+ if (ret)
+ return ret;
+
+ info = response[MSG_ARG0];
+
+ return sprintf(buf, "%u.%u.%u.%u\n",
+ (info >> 24) & 0xff,
+ (info >> 16) & 0xff,
+ (info >> 8) & 0xff,
+ info & 0xff);
+}
+
+static ssize_t show_refresh(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ u32 response[MSG_FIELD_MAX];
+ void __iomem *info;
+ struct private_data *priv;
+ unsigned int offset;
+ u8 refresh, sr_abort, ppre, thermal_offs, tuf;
+ u32 mr4;
+ int ret;
+
+ ret = generic_show(DPFE_CMD_GET_REFRESH, response, dev, buf);
+ if (ret)
+ return ret;
+
+ priv = dev_get_drvdata(dev);
+ offset = response[MSG_ARG0];
+ info = priv->dmem + offset;
+
+ mr4 = readl_relaxed(info + DRAM_INFO_MR4) & DRAM_INFO_MR4_MASK;
+
+ refresh = (mr4 >> DRAM_MR4_REFRESH) & DRAM_MR4_REFRESH_MASK;
+ sr_abort = (mr4 >> DRAM_MR4_SR_ABORT) & DRAM_MR4_SR_ABORT_MASK;
+ ppre = (mr4 >> DRAM_MR4_PPRE) & DRAM_MR4_PPRE_MASK;
+ thermal_offs = (mr4 >> DRAM_MR4_TH_OFFS) & DRAM_MR4_TH_OFFS_MASK;
+ tuf = (mr4 >> DRAM_MR4_TUF) & DRAM_MR4_TUF_MASK;
+
+ return sprintf(buf, "%#x %#x %#x %#x %#x %#x %#x\n",
+ readl_relaxed(info + DRAM_INFO_INTERVAL),
+ refresh, sr_abort, ppre, thermal_offs, tuf,
+ readl_relaxed(info + DRAM_INFO_ERROR));
+}
+
+static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 response[MSG_FIELD_MAX];
+ struct private_data *priv;
+ void __iomem *info;
+ unsigned int offset;
+ unsigned long val;
+ int ret;
+
+ if (kstrtoul(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ priv = dev_get_drvdata(dev);
+
+ ret = __send_command(priv, DPFE_CMD_GET_REFRESH, response);
+ if (ret)
+ return ret;
+
+ offset = response[MSG_ARG0];
+ info = priv->dmem + offset;
+ writel_relaxed(val, info + DRAM_INFO_INTERVAL);
+
+ return count;
+}
+
+static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ u32 response[MSG_FIELD_MAX];
+ struct private_data *priv;
+ void __iomem *info;
+ unsigned int offset;
+ int ret;
+
+ ret = generic_show(DPFE_CMD_GET_VENDOR, response, dev, buf);
+ if (ret)
+ return ret;
+
+ offset = response[MSG_ARG0];
+ priv = dev_get_drvdata(dev);
+ info = priv->dmem + offset;
+
+ return sprintf(buf, "%#x %#x %#x %#x %#x\n",
+ readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
+ readl_relaxed(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK,
+ readl_relaxed(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK,
+ readl_relaxed(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK,
+ readl_relaxed(info + DRAM_VENDOR_ERROR));
+}
+
+static int brcmstb_dpfe_resume(struct platform_device *pdev)
+{
+ struct init_data init;
+
+ return brcmstb_dpfe_download_firmware(pdev, &init);
+}
+
+static DEVICE_ATTR(dpfe_info, 0444, show_info, NULL);
+static DEVICE_ATTR(dpfe_refresh, 0644, show_refresh, store_refresh);
+static DEVICE_ATTR(dpfe_vendor, 0444, show_vendor, NULL);
+static struct attribute *dpfe_attrs[] = {
+ &dev_attr_dpfe_info.attr,
+ &dev_attr_dpfe_refresh.attr,
+ &dev_attr_dpfe_vendor.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(dpfe);
+
+static int brcmstb_dpfe_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct private_data *priv;
+ struct device *dpfe_dev;
+ struct init_data init;
+ struct resource *res;
+ u32 index;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_init(&priv->lock);
+ platform_set_drvdata(pdev, priv);
+
+ /* Cell index is optional; default to 0 if not present. */
+ ret = of_property_read_u32(dev->of_node, "cell-index", &index);
+ if (ret)
+ index = 0;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dpfe-cpu");
+ priv->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->regs)) {
+ dev_err(dev, "couldn't map DCPU registers\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dpfe-dmem");
+ priv->dmem = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->dmem)) {
+ dev_err(dev, "Couldn't map DCPU data memory\n");
+ return -ENOENT;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dpfe-imem");
+ priv->imem = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->imem)) {
+ dev_err(dev, "Couldn't map DCPU instruction memory\n");
+ return -ENOENT;
+ }
+
+ ret = brcmstb_dpfe_download_firmware(pdev, &init);
+ if (ret)
+ goto err;
+
+ dpfe_dev = devm_kzalloc(dev, sizeof(*dpfe_dev), GFP_KERNEL);
+ if (!dpfe_dev) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ priv->dev = dpfe_dev;
+ priv->index = index;
+
+ dpfe_dev->parent = dev;
+ dpfe_dev->groups = dpfe_groups;
+ dpfe_dev->of_node = dev->of_node;
+ dev_set_drvdata(dpfe_dev, priv);
+ dev_set_name(dpfe_dev, "dpfe%u", index);
+
+ ret = device_register(dpfe_dev);
+ if (ret)
+ goto err;
+
+ dev_info(dev, "registered.\n");
+
+ return 0;
+
+err:
+ dev_err(dev, "failed to initialize -- error %d\n", ret);
+
+ return ret;
+}
+
+static const struct of_device_id brcmstb_dpfe_of_match[] = {
+ { .compatible = "brcm,dpfe-cpu", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, brcmstb_dpfe_of_match);
+
+static struct platform_driver brcmstb_dpfe_driver = {
+ .driver = {
+ .name = DRVNAME,
+ .of_match_table = brcmstb_dpfe_of_match,
+ },
+ .probe = brcmstb_dpfe_probe,
+ .resume = brcmstb_dpfe_resume,
+};
+
+module_platform_driver(brcmstb_dpfe_driver);
+
+MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
+MODULE_DESCRIPTION("BRCMSTB DDR PHY Front End Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c
index 7059bbda2fac..a385a35c7de9 100644
--- a/drivers/memory/omap-gpmc.c
+++ b/drivers/memory/omap-gpmc.c
@@ -1075,11 +1075,33 @@ int gpmc_configure(int cmd, int wval)
}
EXPORT_SYMBOL(gpmc_configure);
-void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+static bool gpmc_nand_writebuffer_empty(void)
+{
+ if (gpmc_read_reg(GPMC_STATUS) & GPMC_STATUS_EMPTYWRITEBUFFERSTATUS)
+ return true;
+
+ return false;
+}
+
+static struct gpmc_nand_ops nand_ops = {
+ .nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
+};
+
+/**
+ * gpmc_omap_get_nand_ops - Get the GPMC NAND interface
+ * @regs: the GPMC NAND register map exclusive for NAND use.
+ * @cs: GPMC chip select number on which the NAND sits. The
+ * register map returned will be specific to this chip select.
+ *
+ * Returns NULL on error e.g. invalid cs.
+ */
+struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
{
int i;
- reg->gpmc_status = NULL; /* deprecated */
+ if (cs >= gpmc_cs_num)
+ return NULL;
+
reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
@@ -1111,34 +1133,6 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 +
i * GPMC_BCH_SIZE;
}
-}
-
-static bool gpmc_nand_writebuffer_empty(void)
-{
- if (gpmc_read_reg(GPMC_STATUS) & GPMC_STATUS_EMPTYWRITEBUFFERSTATUS)
- return true;
-
- return false;
-}
-
-static struct gpmc_nand_ops nand_ops = {
- .nand_writebuffer_empty = gpmc_nand_writebuffer_empty,
-};
-
-/**
- * gpmc_omap_get_nand_ops - Get the GPMC NAND interface
- * @regs: the GPMC NAND register map exclusive for NAND use.
- * @cs: GPMC chip select number on which the NAND sits. The
- * register map returned will be specific to this chip select.
- *
- * Returns NULL on error e.g. invalid cs.
- */
-struct gpmc_nand_ops *gpmc_omap_get_nand_ops(struct gpmc_nand_regs *reg, int cs)
-{
- if (cs >= gpmc_cs_num)
- return NULL;
-
- gpmc_update_nand_reg(reg, cs);
return &nand_ops;
}