diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/joystick/iforce/iforce-ff.c | 3 | ||||
-rw-r--r-- | drivers/input/joystick/iforce/iforce-main.c | 3 | ||||
-rw-r--r-- | drivers/input/joystick/iforce/iforce-packets.c | 3 | ||||
-rw-r--r-- | drivers/input/joystick/iforce/iforce-serio.c | 3 | ||||
-rw-r--r-- | drivers/input/joystick/iforce/iforce-usb.c | 3 | ||||
-rw-r--r-- | drivers/input/joystick/iforce/iforce.h | 3 | ||||
-rw-r--r-- | drivers/input/keyboard/Kconfig | 16 | ||||
-rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/adp5589-keys.c | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/applespi.c | 1977 | ||||
-rw-r--r-- | drivers/input/keyboard/applespi.h | 29 | ||||
-rw-r--r-- | drivers/input/keyboard/applespi_trace.h | 93 | ||||
-rw-r--r-- | drivers/input/keyboard/mtk-pmic-keys.c | 9 | ||||
-rw-r--r-- | drivers/input/keyboard/sun4i-lradc-keys.c | 3 | ||||
-rw-r--r-- | drivers/input/mouse/alps.c | 32 | ||||
-rw-r--r-- | drivers/input/mouse/synaptics.c | 3 | ||||
-rw-r--r-- | drivers/input/mouse/trackpoint.h | 3 | ||||
-rw-r--r-- | drivers/input/serio/hyperv-keyboard.c | 4 | ||||
-rw-r--r-- | drivers/input/tablet/gtco.c | 20 | ||||
-rw-r--r-- | drivers/input/touchscreen/auo-pixcir-ts.c | 3 |
20 files changed, 2183 insertions, 29 deletions
diff --git a/drivers/input/joystick/iforce/iforce-ff.c b/drivers/input/joystick/iforce/iforce-ff.c index 4cadebd8b9c4..95c0348843e6 100644 --- a/drivers/input/joystick/iforce/iforce-ff.c +++ b/drivers/input/joystick/iforce/iforce-ff.c @@ -6,9 +6,6 @@ * USB/RS232 I-Force joysticks and wheels. */ -/* - */ - #include "iforce.h" /* diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index 9a5f90da06ec..b2a68bc9f0b4 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -6,9 +6,6 @@ * USB/RS232 I-Force joysticks and wheels. */ -/* - */ - #include <asm/unaligned.h> #include "iforce.h" diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index b313e38b2c3a..763642c8cee9 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -6,9 +6,6 @@ * USB/RS232 I-Force joysticks and wheels. */ -/* - */ - #include <asm/unaligned.h> #include "iforce.h" diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c index bbe31e0b759f..f95a81b9fac7 100644 --- a/drivers/input/joystick/iforce/iforce-serio.c +++ b/drivers/input/joystick/iforce/iforce-serio.c @@ -6,9 +6,6 @@ * USB/RS232 I-Force joysticks and wheels. */ -/* - */ - #include <linux/serio.h> #include "iforce.h" diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index ade376bfb79f..29abfeeef9a5 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -6,9 +6,6 @@ * USB/RS232 I-Force joysticks and wheels. */ -/* - */ - #include <linux/usb.h> #include "iforce.h" diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h index 9cfa460466aa..6aa761ebbdf7 100644 --- a/drivers/input/joystick/iforce/iforce.h +++ b/drivers/input/joystick/iforce/iforce.h @@ -6,9 +6,6 @@ * USB/RS232 I-Force joysticks and wheels. */ -/* - */ - #include <linux/kernel.h> #include <linux/slab.h> #include <linux/input.h> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 7c4f19dab34f..8e9c3ea9d5e7 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -71,6 +71,22 @@ config KEYBOARD_AMIGA config ATARI_KBD_CORE bool +config KEYBOARD_APPLESPI + tristate "Apple SPI keyboard and trackpad" + depends on ACPI && EFI + depends on SPI + depends on X86 || COMPILE_TEST + help + Say Y here if you are running Linux on any Apple MacBook8,1 or later, + or any MacBookPro13,* or MacBookPro14,*. + + You will also need to enable appropriate SPI master controllers: + spi_pxa2xx_platform and spi_pxa2xx_pci for MacBook8,1, and + spi_pxa2xx_platform and intel_lpss_pci for the rest. + + To compile this driver as a module, choose M here: the + module will be called applespi. + config KEYBOARD_ATARI tristate "Atari keyboard" depends on ATARI diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index f0291ca39f62..06a0af6efeae 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o +obj-$(CONFIG_KEYBOARD_APPLESPI) += applespi.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index 4c05c70a8cf3..4f96a4a99e5b 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -505,6 +505,7 @@ static int adp5589_gpio_add(struct adp5589_kpad *kpad) if (!gpio_data) return 0; + kpad->gc.parent = dev; kpad->gc.ngpio = adp5589_build_gpiomap(kpad, pdata); if (kpad->gc.ngpio == 0) { dev_info(dev, "No unused gpios left to export\n"); diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c new file mode 100644 index 000000000000..548737e7aeda --- /dev/null +++ b/drivers/input/keyboard/applespi.c @@ -0,0 +1,1977 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MacBook (Pro) SPI keyboard and touchpad driver + * + * Copyright (c) 2015-2018 Federico Lorenzi + * Copyright (c) 2017-2018 Ronald Tschalär + */ + +/* + * The keyboard and touchpad controller on the MacBookAir6, MacBookPro12, + * MacBook8 and newer can be driven either by USB or SPI. However the USB + * pins are only connected on the MacBookAir6 and 7 and the MacBookPro12. + * All others need this driver. The interface is selected using ACPI methods: + * + * * UIEN ("USB Interface Enable"): If invoked with argument 1, disables SPI + * and enables USB. If invoked with argument 0, disables USB. + * * UIST ("USB Interface Status"): Returns 1 if USB is enabled, 0 otherwise. + * * SIEN ("SPI Interface Enable"): If invoked with argument 1, disables USB + * and enables SPI. If invoked with argument 0, disables SPI. + * * SIST ("SPI Interface Status"): Returns 1 if SPI is enabled, 0 otherwise. + * * ISOL: Resets the four GPIO pins used for SPI. Intended to be invoked with + * argument 1, then once more with argument 0. + * + * UIEN and UIST are only provided on models where the USB pins are connected. + * + * SPI-based Protocol + * ------------------ + * + * The device and driver exchange messages (struct message); each message is + * encapsulated in one or more packets (struct spi_packet). There are two types + * of exchanges: reads, and writes. A read is signaled by a GPE, upon which one + * message can be read from the device. A write exchange consists of writing a + * command message, immediately reading a short status packet, and then, upon + * receiving a GPE, reading the response message. Write exchanges cannot be + * interleaved, i.e. a new write exchange must not be started till the previous + * write exchange is complete. Whether a received message is part of a read or + * write exchange is indicated in the encapsulating packet's flags field. + * + * A single message may be too large to fit in a single packet (which has a + * fixed, 256-byte size). In that case it will be split over multiple, + * consecutive packets. + */ + +#include <linux/acpi.h> +#include <linux/crc16.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/efi.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/spi/spi.h> +#include <linux/wait.h> +#include <linux/workqueue.h> + +#include <asm/barrier.h> +#include <asm/unaligned.h> + +#define CREATE_TRACE_POINTS +#include "applespi.h" +#include "applespi_trace.h" + +#define APPLESPI_PACKET_SIZE 256 +#define APPLESPI_STATUS_SIZE 4 + +#define PACKET_TYPE_READ 0x20 +#define PACKET_TYPE_WRITE 0x40 +#define PACKET_DEV_KEYB 0x01 +#define PACKET_DEV_TPAD 0x02 +#define PACKET_DEV_INFO 0xd0 + +#define MAX_ROLLOVER 6 + +#define MAX_FINGERS 11 +#define MAX_FINGER_ORIENTATION 16384 +#define MAX_PKTS_PER_MSG 2 + +#define KBD_BL_LEVEL_MIN 32U +#define KBD_BL_LEVEL_MAX 255U +#define KBD_BL_LEVEL_SCALE 1000000U +#define KBD_BL_LEVEL_ADJ \ + ((KBD_BL_LEVEL_MAX - KBD_BL_LEVEL_MIN) * KBD_BL_LEVEL_SCALE / 255U) + +#define EFI_BL_LEVEL_NAME L"KeyboardBacklightLevel" +#define EFI_BL_LEVEL_GUID EFI_GUID(0xa076d2af, 0x9678, 0x4386, 0x8b, 0x58, 0x1f, 0xc8, 0xef, 0x04, 0x16, 0x19) + +#define APPLE_FLAG_FKEY 0x01 + +#define SPI_RW_CHG_DELAY_US 100 /* from experimentation, in µs */ + +#define SYNAPTICS_VENDOR_ID 0x06cb + +static unsigned int fnmode = 1; +module_param(fnmode, uint, 0644); +MODULE_PARM_DESC(fnmode, "Mode of Fn key on Apple keyboards (0 = disabled, [1] = fkeyslast, 2 = fkeysfirst)"); + +static unsigned int fnremap; +module_param(fnremap, uint, 0644); +MODULE_PARM_DESC(fnremap, "Remap Fn key ([0] = no-remap; 1 = left-ctrl, 2 = left-shift, 3 = left-alt, 4 = left-meta, 6 = right-shift, 7 = right-alt, 8 = right-meta)"); + +static bool iso_layout; +module_param(iso_layout, bool, 0644); +MODULE_PARM_DESC(iso_layout, "Enable/Disable hardcoded ISO-layout of the keyboard. ([0] = disabled, 1 = enabled)"); + +static char touchpad_dimensions[40]; +module_param_string(touchpad_dimensions, touchpad_dimensions, + sizeof(touchpad_dimensions), 0444); +MODULE_PARM_DESC(touchpad_dimensions, "The pixel dimensions of the touchpad, as XxY+W+H ."); + +/** + * struct keyboard_protocol - keyboard message. + * message.type = 0x0110, message.length = 0x000a + * + * @unknown1: unknown + * @modifiers: bit-set of modifier/control keys pressed + * @unknown2: unknown + * @keys_pressed: the (non-modifier) keys currently pressed + * @fn_pressed: whether the fn key is currently pressed + * @crc16: crc over the whole message struct (message header + + * this struct) minus this @crc16 field + */ +struct keyboard_protocol { + u8 unknown1; + u8 modifiers; + u8 unknown2; + u8 keys_pressed[MAX_ROLLOVER]; + u8 fn_pressed; + __le16 crc16; +}; + +/** + * struct tp_finger - single trackpad finger structure, le16-aligned + * + * @origin: zero when switching track finger + * @abs_x: absolute x coodinate + * @abs_y: absolute y coodinate + * @rel_x: relative x coodinate + * @rel_y: relative y coodinate + * @tool_major: tool area, major axis + * @tool_minor: tool area, minor axis + * @orientation: 16384 when point, else 15 bit angle + * @touch_major: touch area, major axis + * @touch_minor: touch area, minor axis + * @unused: zeros + * @pressure: pressure on forcetouch touchpad + * @multi: one finger: varies, more fingers: constant + * @crc16: on last finger: crc over the whole message struct + * (i.e. message header + this struct) minus the last + * @crc16 field; unknown on all other fingers. + */ +struct tp_finger { + __le16 origin; + __le16 abs_x; + __le16 abs_y; + __le16 rel_x; + __le16 rel_y; + __le16 tool_major; + __le16 tool_minor; + __le16 orientation; + __le16 touch_major; + __le16 touch_minor; + __le16 unused[2]; + __le16 pressure; + __le16 multi; + __le16 crc16; +}; + +/** + * struct touchpad_protocol - touchpad message. + * message.type = 0x0210 + * + * @unknown1: unknown + * @clicked: 1 if a button-click was detected, 0 otherwise + * @unknown2: unknown + * @number_of_fingers: the number of fingers being reported in @fingers + * @clicked2: same as @clicked + * @unknown3: unknown + * @fingers: the data for each finger + */ +struct touchpad_protocol { + u8 unknown1[1]; + u8 clicked; + u8 unknown2[28]; + u8 number_of_fingers; + u8 clicked2; + u8 unknown3[16]; + struct tp_finger fingers[0]; +}; + +/** + * struct command_protocol_tp_info - get touchpad info. + * message.type = 0x1020, message.length = 0x0000 + * + * @crc16: crc over the whole message struct (message header + + * this struct) minus this @crc16 field + */ +struct command_protocol_tp_info { + __le16 crc16; +}; + +/** + * struct touchpad_info - touchpad info response. + * message.type = 0x1020, message.length = 0x006e + * + * @unknown1: unknown + * @model_flags: flags (vary by model number, but significance otherwise + * unknown) + * @model_no: the touchpad model number + * @unknown2: unknown + * @crc16: crc over the whole message struct (message header + + * this struct) minus this @crc16 field + */ +struct touchpad_info_protocol { + u8 unknown1[105]; + u8 model_flags; + u8 model_no; + u8 unknown2[3]; + __le16 crc16; +}; + +/** + * struct command_protocol_mt_init - initialize multitouch. + * message.type = 0x0252, message.length = 0x0002 + * + * @cmd: value: 0x0102 + * @crc16: crc over the whole message struct (message header + + * this struct) minus this @crc16 field + */ +struct command_protocol_mt_init { + __le16 cmd; + __le16 crc16; +}; + +/** + * struct command_protocol_capsl - toggle caps-lock led + * message.type = 0x0151, message.length = 0x0002 + * + * @unknown: value: 0x01 (length?) + * @led: 0 off, 2 on + * @crc16: crc over the whole message struct (message header + + * this struct) minus this @crc16 field + */ +struct command_protocol_capsl { + u8 unknown; + u8 led; + __le16 crc16; +}; + +/** + * struct command_protocol_bl - set keyboard backlight brightness + * message.type = 0xB051, message.length = 0x0006 + * + * @const1: value: 0x01B0 + * @level: the brightness level to set + * @const2: value: 0x0001 (backlight off), 0x01F4 (backlight on) + * @crc16: crc over the whole message struct (message header + + * this struct) minus this @crc16 field + */ +struct command_protocol_bl { + __le16 const1; + __le16 level; + __le16 const2; + __le16 crc16; +}; + +/** + * struct message - a complete spi message. + * + * Each message begins with fixed header, followed by a message-type specific + * payload, and ends with a 16-bit crc. Because of the varying lengths of the + * payload, the crc is defined at the end of each payload struct, rather than + * in this struct. + * + * @type: the message type + * @zero: always 0 + * @counter: incremented on each message, rolls over after 255; there is a + * separate counter for each message type. + * @rsp_buf_len:response buffer length (the exact nature of this field is quite + * speculative). On a request/write this is often the same as + * @length, though in some cases it has been seen to be much larger + * (e.g. 0x400); on a response/read this the same as on the + * request; for reads that are not responses it is 0. + * @length: length of the remainder of the data in the whole message + * structure (after re-assembly in case of being split over + * multiple spi-packets), minus the trailing crc. The total size + * of the message struct is therefore @length + 10. + */ +struct message { + __le16 type; + u8 zero; + u8 counter; + __le16 rsp_buf_len; + __le16 length; + union { + struct keyboard_protocol keyboard; + struct touchpad_protocol touchpad; + struct touchpad_info_protocol tp_info; + struct command_protocol_tp_info tp_info_command; + struct command_protocol_mt_init init_mt_command; + struct command_protocol_capsl capsl_command; + struct command_protocol_bl bl_command; + u8 data[0]; + }; +}; + +/* type + zero + counter + rsp_buf_len + length */ +#define MSG_HEADER_SIZE 8 + +/** + * struct spi_packet - a complete spi packet; always 256 bytes. This carries + * the (parts of the) message in the data. But note that this does not + * necessarily contain a complete message, as in some cases (e.g. many + * fingers pressed) the message is split over multiple packets (see the + * @offset, @remaining, and @length fields). In general the data parts in + * spi_packet's are concatenated until @remaining is 0, and the result is an + * message. + * + * @flags: 0x40 = write (to device), 0x20 = read (from device); note that + * the response to a write still has 0x40. + * @device: 1 = keyboard, 2 = touchpad + * @offset: specifies the offset of this packet's data in the complete + * message; i.e. > 0 indicates this is a continuation packet (in + * the second packet for a message split over multiple packets + * this would then be the same as the @length in the first packet) + * @remaining: number of message bytes remaining in subsequents packets (in + * the first packet of a message split over two packets this would + * then be the same as the @length in the second packet) + * @length: length of the valid data in the @data in this packet + * @data: all or part of a message + * @crc16: crc over this whole structure minus this @crc16 field. This + * covers just this packet, even on multi-packet messages (in + * contrast to the crc in the message). + */ +struct spi_packet { + u8 flags; + u8 device; + __le16 offset; + __le16 remaining; + __le16 length; + u8 data[246]; + __le16 crc16; +}; + +struct spi_settings { + u64 spi_cs_delay; /* cs-to-clk delay in us */ + u64 reset_a2r_usec; /* active-to-receive delay? */ + u64 reset_rec_usec; /* ? (cur val: 10) */ +}; + +/* this mimics struct drm_rect */ +struct applespi_tp_info { + int x_min; + int y_min; + int x_max; + int y_max; +}; + +struct applespi_data { + struct spi_device *spi; + struct spi_settings spi_settings; + struct input_dev *keyboard_input_dev; + struct input_dev *touchpad_input_dev; + + u8 *tx_buffer; + u8 *tx_status; + u8 *rx_buffer; + + u8 *msg_buf; + unsigned int saved_msg_len; + + struct applespi_tp_info tp_info; + + u8 last_keys_pressed[MAX_ROLLOVER]; + u8 last_keys_fn_pressed[MAX_ROLLOVER]; + u8 last_fn_pressed; + struct input_mt_pos pos[MAX_FINGERS]; + int slots[MAX_FINGERS]; + int gpe; + acpi_handle sien; + acpi_handle sist; + + struct spi_transfer dl_t; + struct spi_transfer rd_t; + struct spi_message rd_m; + + struct spi_transfer ww_t; + struct spi_transfer wd_t; + struct spi_transfer wr_t; + struct spi_transfer st_t; + struct spi_message wr_m; + + bool want_tp_info_cmd; + bool want_mt_init_cmd; + bool want_cl_led_on; + bool have_cl_led_on; + unsigned int want_bl_level; + unsigned int have_bl_level; + unsigned int cmd_msg_cntr; + /* lock to protect the above parameters and flags below */ + spinlock_t cmd_msg_lock; + bool cmd_msg_queued; + enum applespi_evt_type cmd_evt_type; + + struct led_classdev backlight_info; + + bool suspended; + bool drain; + wait_queue_head_t drain_complete; + bool read_active; + bool write_active; + + struct work_struct work; + struct touchpad_info_protocol rcvd_tp_info; + + struct dentry *debugfs_root; + bool debug_tp_dim; + char tp_dim_val[40]; + int tp_dim_min_x; + int tp_dim_max_x; + int tp_dim_min_y; + int tp_dim_max_y; +}; + +static const unsigned char applespi_scancodes[] = { + 0, 0, 0, 0, + KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, + KEY_K, KEY_L, KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, + KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, + KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, + KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS, + KEY_EQUAL, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, + KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH, + KEY_CAPSLOCK, + KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, + KEY_F10, KEY_F11, KEY_F12, 0, 0, 0, 0, 0, 0, 0, 0, 0, + KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_102ND, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, KEY_RO, 0, KEY_YEN, 0, 0, 0, 0, 0, + 0, KEY_KATAKANAHIRAGANA, KEY_MUHENKAN +}; + +/* + * This must have exactly as many entries as there are bits in + * struct keyboard_protocol.modifiers . + */ +static const unsigned char applespi_controlcodes[] = { + KEY_LEFTCTRL, + KEY_LEFTSHIFT, + KEY_LEFTALT, + KEY_LEFTMETA, + 0, + KEY_RIGHTSHIFT, + KEY_RIGHTALT, + KEY_RIGHTMETA +}; + +struct applespi_key_translation { + u16 from; + u16 to; + u8 flags; +}; + +static const struct applespi_key_translation applespi_fn_codes[] = { + { KEY_BACKSPACE, KEY_DELETE }, + { KEY_ENTER, KEY_INSERT }, + { KEY_F1, KEY_BRIGHTNESSDOWN, APPLE_FLAG_FKEY }, + { KEY_F2, KEY_BRIGHTNESSUP, APPLE_FLAG_FKEY }, + { KEY_F3, KEY_SCALE, APPLE_FLAG_FKEY }, + { KEY_F4, KEY_DASHBOARD, APPLE_FLAG_FKEY }, + { KEY_F5, KEY_KBDILLUMDOWN, APPLE_FLAG_FKEY }, + { KEY_F6, KEY_KBDILLUMUP, APPLE_FLAG_FKEY }, + { KEY_F7, KEY_PREVIOUSSONG, APPLE_FLAG_FKEY }, + { KEY_F8, KEY_PLAYPAUSE, APPLE_FLAG_FKEY }, + { KEY_F9, KEY_NEXTSONG, APPLE_FLAG_FKEY }, + { KEY_F10, KEY_MUTE, APPLE_FLAG_FKEY }, + { KEY_F11, KEY_VOLUMEDOWN, APPLE_FLAG_FKEY }, + { KEY_F12, KEY_VOLUMEUP, APPLE_FLAG_FKEY }, + { KEY_RIGHT, KEY_END }, + { KEY_LEFT, KEY_HOME }, + { KEY_DOWN, KEY_PAGEDOWN }, + { KEY_UP, KEY_PAGEUP }, + { } +}; + +static const struct applespi_key_translation apple_iso_keyboard[] = { + { KEY_GRAVE, KEY_102ND }, + { KEY_102ND, KEY_GRAVE }, + { } +}; + +struct applespi_tp_model_info { + u16 model; + struct applespi_tp_info tp_info; +}; + +static const struct applespi_tp_model_info applespi_tp_models[] = { + { + .model = 0x04, /* MB8 MB9 MB10 */ + .tp_info = { -5087, -182, 5579, 6089 }, + }, + { + .model = 0x05, /* MBP13,1 MBP13,2 MBP14,1 MBP14,2 */ + .tp_info = { -6243, -170, 6749, 7685 }, + }, + { + .model = 0x06, /* MBP13,3 MBP14,3 */ + .tp_info = { -7456, -163, 7976, 9283 }, + }, + {} +}; + +typedef void (*applespi_trace_fun)(enum applespi_evt_type, + enum applespi_pkt_type, u8 *, size_t); + +static applespi_trace_fun applespi_get_trace_fun(enum applespi_evt_type type) +{ + switch (type) { + case ET_CMD_TP_INI: + return trace_applespi_tp_ini_cmd; + case ET_CMD_BL: + return trace_applespi_backlight_cmd; + case ET_CMD_CL: + return trace_applespi_caps_lock_cmd; + case ET_RD_KEYB: + return trace_applespi_keyboard_data; + case ET_RD_TPAD: + return trace_applespi_touchpad_data; + case ET_RD_UNKN: + return trace_applespi_unknown_data; + default: + WARN_ONCE(1, "Unknown msg type %d", type); + return trace_applespi_unknown_data; + } +} + +static void applespi_setup_read_txfrs(struct applespi_data *applespi) +{ + struct spi_message *msg = &applespi->rd_m; + struct spi_transfer *dl_t = &applespi->dl_t; + struct spi_transfer *rd_t = &applespi->rd_t; + + memset(dl_t, 0, sizeof(*dl_t)); + memset(rd_t, 0, sizeof(*rd_t)); + + dl_t->delay_usecs = applespi->spi_settings.spi_cs_delay; + + rd_t->rx_buf = applespi->rx_buffer; + rd_t->len = APPLESPI_PACKET_SIZE; + + spi_message_init(msg); + spi_message_add_tail(dl_t, msg); + spi_message_add_tail(rd_t, msg); +} + +static void applespi_setup_write_txfrs(struct applespi_data *applespi) +{ + struct spi_message *msg = &applespi->wr_m; + struct spi_transfer *wt_t = &applespi->ww_t; + struct spi_transfer *dl_t = &applespi->wd_t; + struct spi_transfer *wr_t = &applespi->wr_t; + struct spi_transfer *st_t = &applespi->st_t; + + memset(wt_t, 0, sizeof(*wt_t)); + memset(dl_t, 0, sizeof(*dl_t)); + memset(wr_t, 0, sizeof(*wr_t)); + memset(st_t, 0, sizeof(*st_t)); + + /* + * All we need here is a delay at the beginning of the message before + * asserting cs. But the current spi API doesn't support this, so we + * end up with an extra unnecessary (but harmless) cs assertion and + * deassertion. + */ + wt_t->delay_usecs = SPI_RW_CHG_DELAY_US; + wt_t->cs_change = 1; + + dl_t->delay_usecs = applespi->spi_settings.spi_cs_delay; + + wr_t->tx_buf = applespi->tx_buffer; + wr_t->len = APPLESPI_PACKET_SIZE; + wr_t->delay_usecs = SPI_RW_CHG_DELAY_US; + + st_t->rx_buf = applespi->tx_status; + st_t->len = APPLESPI_STATUS_SIZE; + + spi_message_init(msg); + spi_message_add_tail(wt_t, msg); + spi_message_add_tail(dl_t, msg); + spi_message_add_tail(wr_t, msg); + spi_message_add_tail(st_t, msg); +} + +static int applespi_async(struct applespi_data *applespi, + struct spi_message *message, void (*complete)(void *)) +{ + message->complete = complete; + message->context = applespi; + + return spi_async(applespi->spi, message); +} + +static inline bool applespi_check_write_status(struct applespi_data *applespi, + int sts) +{ + static u8 status_ok[] = { 0xac, 0x27, 0x68, 0xd5 }; + + if (sts < 0) { + dev_warn(&applespi->spi->dev, "Error writing to device: %d\n", + sts); + return false; + } + + if (memcmp(applespi->tx_status, status_ok, APPLESPI_STATUS_SIZE)) { + dev_warn(&applespi->spi->dev, "Error writing to device: %*ph\n", + APPLESPI_STATUS_SIZE, applespi->tx_status); + return false; + } + + return true; +} + +static int applespi_get_spi_settings(struct applespi_data *applespi) +{ + struct acpi_device *adev = ACPI_COMPANION(&applespi->spi->dev); + const union acpi_object *o; + struct spi_settings *settings = &applespi->spi_settings; + + if (!acpi_dev_get_property(adev, "spiCSDelay", ACPI_TYPE_BUFFER, &o)) + settings->spi_cs_delay = *(u64 *)o->buffer.pointer; + else + dev_warn(&applespi->spi->dev, + "Property spiCSDelay not found\n"); + + if (!acpi_dev_get_property(adev, "resetA2RUsec", ACPI_TYPE_BUFFER, &o)) + settings->reset_a2r_usec = *(u64 *)o->buffer.pointer; + else + dev_warn(&applespi->spi->dev, + "Property resetA2RUsec not found\n"); + + if (!acpi_dev_get_property(adev, "resetRecUsec", ACPI_TYPE_BUFFER, &o)) + settings->reset_rec_usec = *(u64 *)o->buffer.pointer; + else + dev_warn(&applespi->spi->dev, + "Property resetRecUsec not found\n"); + + dev_dbg(&applespi->spi->dev, + "SPI settings: spi_cs_delay=%llu reset_a2r_usec=%llu reset_rec_usec=%llu\n", + settings->spi_cs_delay, settings->reset_a2r_usec, + settings->reset_rec_usec); + + return 0; +} + +static int applespi_setup_spi(struct applespi_data *applespi) +{ + int sts; + + sts = applespi_get_spi_settings(applespi); + if (sts) + return sts; + + spin_lock_init(&applespi->cmd_msg_lock); + init_waitqueue_head(&applespi->drain_complete); + + return 0; +} + +static int applespi_enable_spi(struct applespi_data *applespi) +{ + acpi_status acpi_sts; + unsigned long long spi_status; + + /* check if SPI is already enabled, so we can skip the delay below */ + acpi_sts = acpi_evaluate_integer(applespi->sist, NULL, NULL, + &spi_status); + if (ACPI_SUCCESS(acpi_sts) && spi_status) + return 0; + + /* SIEN(1) will enable SPI communication */ + acpi_sts = acpi_execute_simple_method(applespi->sien, NULL, 1); + if (ACPI_FAILURE(acpi_sts)) { + dev_err(&applespi->spi->dev, "SIEN failed: %s\n", + acpi_format_exception(acpi_sts)); + return -ENODEV; + } + + /* + * Allow the SPI interface to come up before returning. Without this + * delay, the SPI commands to enable multitouch mode may not reach + * the trackpad controller, causing pointer movement to break upon + * resume from sleep. + */ + msleep(50); + + return 0; +} + +static int applespi_send_cmd_msg(struct applespi_data *applespi); + +static void applespi_msg_complete(struct applespi_data *applespi, + bool is_write_msg, bool is_read_compl) +{ + unsigned long flags; + + spin_lock_irqsave(&applespi->cmd_msg_lock, flags); + + if (is_read_compl) + applespi->read_active = false; + if (is_write_msg) + applespi->write_active = false; + + if (applespi->drain && !applespi->write_active) + wake_up_all(&applespi->drain_complete); + + if (is_write_msg) { + applespi->cmd_msg_queued = false; + applespi_send_cmd_msg(applespi); + } + + spin_unlock_irqrestore(&applespi->cmd_msg_lock, flags); +} + +static void applespi_async_write_complete(void *context) +{ + struct applespi_data *applespi = context; + enum applespi_evt_type evt_type = applespi->cmd_evt_type; + + applespi_get_trace_fun(evt_type)(evt_type, PT_WRITE, + applespi->tx_buffer, + APPLESPI_PACKET_SIZE); + applespi_get_trace_fun(evt_type)(evt_type, PT_STATUS, + applespi->tx_status, + APPLESPI_STATUS_SIZE); + + if (!applespi_check_write_status(applespi, applespi->wr_m.status)) { + /* + * If we got an error, we presumably won't get the expected + * response message either. + */ + applespi_msg_complete(applespi, true, false); + } +} + +static int applespi_send_cmd_msg(struct applespi_data *applespi) +{ + u16 crc; + int sts; + struct spi_packet *packet = (struct spi_packet *)applespi->tx_buffer; + struct message *message = (struct message *)packet->data; + u16 msg_len; + u8 device; + + /* check if draining */ + if (applespi->drain) + return 0; + + /* check whether send is in progress */ + if (applespi->cmd_msg_queued) + return 0; + + /* set up packet */ + memset(packet, 0, APPLESPI_PACKET_SIZE); + + /* are we processing init commands? */ + if (applespi->want_tp_info_cmd) { + applespi->want_tp_info_cmd = false; + applespi->want_mt_init_cmd = true; + applespi->cmd_evt_type = ET_CMD_TP_INI; + + /* build init command */ + device = PACKET_DEV_INFO; + + message->type = cpu_to_le16(0x1020); + msg_len = sizeof(message->tp_info_command); + + message->zero = 0x02; + message->rsp_buf_len = cpu_to_le16(0x0200); + + } else if (applespi->want_mt_init_cmd) { + applespi->want_mt_init_cmd = false; + applespi->cmd_evt_type = ET_CMD_TP_INI; + + /* build init command */ + device = PACKET_DEV_TPAD; + + message->type = cpu_to_le16(0x0252); + msg_len = sizeof(message->init_mt_command); + + message->init_mt_command.cmd = cpu_to_le16(0x0102); + + /* do we need caps-lock command? */ + } else if (applespi->want_cl_led_on != applespi->have_cl_led_on) { + applespi->have_cl_led_on = applespi->want_cl_led_on; + applespi->cmd_evt_type = ET_CMD_CL; + + /* build led command */ + device = PACKET_DEV_KEYB; + + message->type = cpu_to_le16(0x0151); + msg_len = sizeof(message->capsl_command); + + message->capsl_command.unknown = 0x01; + message->capsl_command.led = applespi->have_cl_led_on ? 2 : 0; + + /* do we need backlight command? */ + } else if (applespi->want_bl_level != applespi->have_bl_level) { + applespi->have_bl_level = applespi->want_bl_level; + applespi->cmd_evt_type = ET_CMD_B |