diff options
Diffstat (limited to 'drivers/input/mouse')
-rw-r--r-- | drivers/input/mouse/Kconfig | 30 | ||||
-rw-r--r-- | drivers/input/mouse/Makefile | 5 | ||||
-rw-r--r-- | drivers/input/mouse/cyapa.c | 289 | ||||
-rw-r--r-- | drivers/input/mouse/elan_i2c.h | 86 | ||||
-rw-r--r-- | drivers/input/mouse/elan_i2c_core.c | 1137 | ||||
-rw-r--r-- | drivers/input/mouse/elan_i2c_i2c.c | 611 | ||||
-rw-r--r-- | drivers/input/mouse/elan_i2c_smbus.c | 514 | ||||
-rw-r--r-- | drivers/input/mouse/lifebook.h | 6 | ||||
-rw-r--r-- | drivers/input/mouse/navpoint.c | 6 | ||||
-rw-r--r-- | drivers/input/mouse/synaptics_i2c.c | 6 |
10 files changed, 2546 insertions, 144 deletions
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 366fc7ad5eb6..d8b46b0f2dbe 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -215,6 +215,36 @@ config MOUSE_CYAPA To compile this driver as a module, choose M here: the module will be called cyapa. +config MOUSE_ELAN_I2C + tristate "ELAN I2C Touchpad support" + depends on I2C + help + This driver adds support for Elan I2C/SMbus Trackpads. + + Say Y here if you have a ELAN I2C/SMbus Touchpad. + + To compile this driver as a module, choose M here: the module will be + called elan_i2c. + +config MOUSE_ELAN_I2C_I2C + bool "Enable I2C support" + depends on MOUSE_ELAN_I2C + default y + help + Say Y here if Elan Touchpad in your system is connected to + a standard I2C controller. + + If unsure, say Y. + +config MOUSE_ELAN_I2C_SMBUS + bool "Enable SMbus support" + depends on MOUSE_ELAN_I2C + help + Say Y here if Elan Touchpad in your system is connected to + a SMbus adapter. + + If unsure, say Y. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index dda507f8b3a2..560003dcac37 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o obj-$(CONFIG_MOUSE_CYAPA) += cyapa.o +obj-$(CONFIG_MOUSE_ELAN_I2C) += elan_i2c.o obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o @@ -34,3 +35,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC) += sentelic.o psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT) += trackpoint.o psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT) += touchkit_ps2.o psmouse-$(CONFIG_MOUSE_PS2_CYPRESS) += cypress_ps2.o + +elan_i2c-objs := elan_i2c_core.o +elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C) += elan_i2c_i2c.o +elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_SMBUS) += elan_i2c_smbus.o diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c index b409c3d7d4fb..1bece8cad46f 100644 --- a/drivers/input/mouse/cyapa.c +++ b/drivers/input/mouse/cyapa.c @@ -6,7 +6,7 @@ * Daniel Kurtz <djkurtz@chromium.org> * Benson Leung <bleung@chromium.org> * - * Copyright (C) 2011-2012 Cypress Semiconductor, Inc. + * Copyright (C) 2011-2014 Cypress Semiconductor, Inc. * Copyright (C) 2011-2012 Google, Inc. * * This file is subject to the terms and conditions of the GNU General Public @@ -206,7 +206,6 @@ struct cyapa { struct i2c_client *client; struct input_dev *input; char phys[32]; /* device physical location */ - int irq; bool irq_wake; /* irq wake is enabled */ bool smbus; @@ -422,8 +421,8 @@ static ssize_t cyapa_read_block(struct cyapa *cyapa, u8 cmd_idx, u8 *values) */ static int cyapa_get_state(struct cyapa *cyapa) { - int ret; u8 status[BL_STATUS_SIZE]; + int error; cyapa->state = CYAPA_STATE_NO_DEVICE; @@ -433,18 +432,18 @@ static int cyapa_get_state(struct cyapa *cyapa) * If the device is in operation mode, this will be the DATA regs. * */ - ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE, - status); + error = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE, + status); /* * On smbus systems in OP mode, the i2c_reg_read will fail with * -ETIMEDOUT. In this case, try again using the smbus equivalent * command. This should return a BL_HEAD indicating CYAPA_STATE_OP. */ - if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO)) - ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status); + if (cyapa->smbus && (error == -ETIMEDOUT || error == -ENXIO)) + error = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status); - if (ret != BL_STATUS_SIZE) + if (error != BL_STATUS_SIZE) goto error; if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) { @@ -454,7 +453,7 @@ static int cyapa_get_state(struct cyapa *cyapa) cyapa->state = CYAPA_STATE_OP; break; default: - ret = -EAGAIN; + error = -EAGAIN; goto error; } } else { @@ -468,7 +467,7 @@ static int cyapa_get_state(struct cyapa *cyapa) return 0; error: - return (ret < 0) ? ret : -EAGAIN; + return (error < 0) ? error : -EAGAIN; } /* @@ -487,31 +486,31 @@ error: */ static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout) { - int ret; + int error; int tries = timeout / 100; - ret = cyapa_get_state(cyapa); - while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) { + error = cyapa_get_state(cyapa); + while ((error || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) { msleep(100); - ret = cyapa_get_state(cyapa); + error = cyapa_get_state(cyapa); } - return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret; + return (error == -EAGAIN || error == -ETIMEDOUT) ? -ETIMEDOUT : error; } static int cyapa_bl_deactivate(struct cyapa *cyapa) { - int ret; + int error; - ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate), - bl_deactivate); - if (ret < 0) - return ret; + error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate), + bl_deactivate); + if (error) + return error; /* wait for bootloader to switch to idle state; should take < 100ms */ msleep(100); - ret = cyapa_poll_state(cyapa, 500); - if (ret < 0) - return ret; + error = cyapa_poll_state(cyapa, 500); + if (error) + return error; if (cyapa->state != CYAPA_STATE_BL_IDLE) return -EAGAIN; return 0; @@ -532,11 +531,11 @@ static int cyapa_bl_deactivate(struct cyapa *cyapa) */ static int cyapa_bl_exit(struct cyapa *cyapa) { - int ret; + int error; - ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit); - if (ret < 0) - return ret; + error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit); + if (error) + return error; /* * Wait for bootloader to exit, and operation mode to start. @@ -548,9 +547,9 @@ static int cyapa_bl_exit(struct cyapa *cyapa) * updated to new firmware, it must first calibrate its sensors, which * can take up to an additional 2 seconds. */ - ret = cyapa_poll_state(cyapa, 2000); - if (ret < 0) - return ret; + error = cyapa_poll_state(cyapa, 2000); + if (error < 0) + return error; if (cyapa->state != CYAPA_STATE_OP) return -EAGAIN; @@ -577,10 +576,13 @@ static int cyapa_set_power_mode(struct cyapa *cyapa, u8 power_mode) power = ret & ~PWR_MODE_MASK; power |= power_mode & PWR_MODE_MASK; ret = cyapa_write_byte(cyapa, CYAPA_CMD_POWER_MODE, power); - if (ret < 0) + if (ret < 0) { dev_err(dev, "failed to set power_mode 0x%02x err = %d\n", power_mode, ret); - return ret; + return ret; + } + + return 0; } static int cyapa_get_query_data(struct cyapa *cyapa) @@ -637,28 +639,28 @@ static int cyapa_check_is_operational(struct cyapa *cyapa) { struct device *dev = &cyapa->client->dev; static const char unique_str[] = "CYTRA"; - int ret; + int error; - ret = cyapa_poll_state(cyapa, 2000); - if (ret < 0) - return ret; + error = cyapa_poll_state(cyapa, 2000); + if (error) + return error; switch (cyapa->state) { case CYAPA_STATE_BL_ACTIVE: - ret = cyapa_bl_deactivate(cyapa); - if (ret) - return ret; + error = cyapa_bl_deactivate(cyapa); + if (error) + return error; /* Fallthrough state */ case CYAPA_STATE_BL_IDLE: - ret = cyapa_bl_exit(cyapa); - if (ret) - return ret; + error = cyapa_bl_exit(cyapa); + if (error) + return error; /* Fallthrough state */ case CYAPA_STATE_OP: - ret = cyapa_get_query_data(cyapa); - if (ret < 0) - return ret; + error = cyapa_get_query_data(cyapa); + if (error) + return error; /* only support firmware protocol gen3 */ if (cyapa->gen != CYAPA_GEN3) { @@ -753,18 +755,42 @@ static u8 cyapa_check_adapter_functionality(struct i2c_client *client) return ret; } +static int cyapa_open(struct input_dev *input) +{ + struct cyapa *cyapa = input_get_drvdata(input); + struct i2c_client *client = cyapa->client; + int error; + + error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + if (error) { + dev_err(&client->dev, "set active power failed: %d\n", error); + return error; + } + + enable_irq(client->irq); + return 0; +} + +static void cyapa_close(struct input_dev *input) +{ + struct cyapa *cyapa = input_get_drvdata(input); + + disable_irq(cyapa->client->irq); + cyapa_set_power_mode(cyapa, PWR_MODE_OFF); +} + static int cyapa_create_input_dev(struct cyapa *cyapa) { struct device *dev = &cyapa->client->dev; - int ret; struct input_dev *input; + int error; if (!cyapa->physical_size_x || !cyapa->physical_size_y) return -EINVAL; - input = cyapa->input = input_allocate_device(); + input = devm_input_allocate_device(dev); if (!input) { - dev_err(dev, "allocate memory for input device failed\n"); + dev_err(dev, "failed to allocate memory for input device.\n"); return -ENOMEM; } @@ -772,14 +798,17 @@ static int cyapa_create_input_dev(struct cyapa *cyapa) input->phys = cyapa->phys; input->id.bustype = BUS_I2C; input->id.version = 1; - input->id.product = 0; /* means any product in eventcomm. */ + input->id.product = 0; /* Means any product in eventcomm. */ input->dev.parent = &cyapa->client->dev; + input->open = cyapa_open; + input->close = cyapa_close; + input_set_drvdata(input, cyapa); __set_bit(EV_ABS, input->evbit); - /* finger position */ + /* Finger position */ input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0, @@ -801,35 +830,25 @@ static int cyapa_create_input_dev(struct cyapa *cyapa) if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK) __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); - /* handle pointer emulation and unused slots in core */ - ret = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS, - INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED); - if (ret) { - dev_err(dev, "allocate memory for MT slots failed, %d\n", ret); - goto err_free_device; + /* Handle pointer emulation and unused slots in core */ + error = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED); + if (error) { + dev_err(dev, "failed to initialize MT slots: %d\n", error); + return error; } - /* Register the device in input subsystem */ - ret = input_register_device(input); - if (ret) { - dev_err(dev, "input device register failed, %d\n", ret); - goto err_free_device; - } + cyapa->input = input; return 0; - -err_free_device: - input_free_device(input); - cyapa->input = NULL; - return ret; } static int cyapa_probe(struct i2c_client *client, const struct i2c_device_id *dev_id) { - int ret; - u8 adapter_func; - struct cyapa *cyapa; struct device *dev = &client->dev; + struct cyapa *cyapa; + u8 adapter_func; + int error; adapter_func = cyapa_check_adapter_functionality(client); if (adapter_func == CYAPA_ADAPTER_FUNC_NONE) { @@ -837,11 +856,9 @@ static int cyapa_probe(struct i2c_client *client, return -EIO; } - cyapa = kzalloc(sizeof(struct cyapa), GFP_KERNEL); - if (!cyapa) { - dev_err(dev, "allocate memory for cyapa failed\n"); + cyapa = devm_kzalloc(dev, sizeof(struct cyapa), GFP_KERNEL); + if (!cyapa) return -ENOMEM; - } cyapa->gen = CYAPA_GEN3; cyapa->client = client; @@ -852,67 +869,61 @@ static int cyapa_probe(struct i2c_client *client, /* i2c isn't supported, use smbus */ if (adapter_func == CYAPA_ADAPTER_FUNC_SMBUS) cyapa->smbus = true; + cyapa->state = CYAPA_STATE_NO_DEVICE; - ret = cyapa_check_is_operational(cyapa); - if (ret) { - dev_err(dev, "device not operational, %d\n", ret); - goto err_mem_free; - } - ret = cyapa_create_input_dev(cyapa); - if (ret) { - dev_err(dev, "create input_dev instance failed, %d\n", ret); - goto err_mem_free; + error = cyapa_check_is_operational(cyapa); + if (error) { + dev_err(dev, "device not operational, %d\n", error); + return error; } - ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); - if (ret) { - dev_err(dev, "set active power failed, %d\n", ret); - goto err_unregister_device; + /* Power down the device until we need it */ + error = cyapa_set_power_mode(cyapa, PWR_MODE_OFF); + if (error) { + dev_err(dev, "failed to quiesce the device: %d\n", error); + return error; } - cyapa->irq = client->irq; - ret = request_threaded_irq(cyapa->irq, - NULL, - cyapa_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "cyapa", - cyapa); - if (ret) { - dev_err(dev, "IRQ request failed: %d\n, ", ret); - goto err_unregister_device; + error = cyapa_create_input_dev(cyapa); + if (error) + return error; + + error = devm_request_threaded_irq(dev, client->irq, + NULL, cyapa_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "cyapa", cyapa); + if (error) { + dev_err(dev, "failed to request threaded irq: %d\n", error); + return error; } - return 0; + /* Disable IRQ until the device is opened */ + disable_irq(client->irq); -err_unregister_device: - input_unregister_device(cyapa->input); -err_mem_free: - kfree(cyapa); - - return ret; -} - -static int cyapa_remove(struct i2c_client *client) -{ - struct cyapa *cyapa = i2c_get_clientdata(client); - - free_irq(cyapa->irq, cyapa); - input_unregister_device(cyapa->input); - cyapa_set_power_mode(cyapa, PWR_MODE_OFF); - kfree(cyapa); + /* Register the device in input subsystem */ + error = input_register_device(cyapa->input); + if (error) { + dev_err(dev, "failed to register input device: %d\n", error); + return error; + } return 0; } -#ifdef CONFIG_PM_SLEEP -static int cyapa_suspend(struct device *dev) +static int __maybe_unused cyapa_suspend(struct device *dev) { - int ret; + struct i2c_client *client = to_i2c_client(dev); + struct cyapa *cyapa = i2c_get_clientdata(client); + struct input_dev *input = cyapa->input; u8 power_mode; - struct cyapa *cyapa = dev_get_drvdata(dev); + int error; - disable_irq(cyapa->irq); + error = mutex_lock_interruptible(&input->mutex); + if (error) + return error; + + disable_irq(client->irq); /* * Set trackpad device to idle mode if wakeup is allowed, @@ -920,31 +931,44 @@ static int cyapa_suspend(struct device *dev) */ power_mode = device_may_wakeup(dev) ? PWR_MODE_IDLE : PWR_MODE_OFF; - ret = cyapa_set_power_mode(cyapa, power_mode); - if (ret < 0) - dev_err(dev, "set power mode failed, %d\n", ret); + error = cyapa_set_power_mode(cyapa, power_mode); + if (error) + dev_err(dev, "resume: set power mode to %d failed: %d\n", + power_mode, error); if (device_may_wakeup(dev)) - cyapa->irq_wake = (enable_irq_wake(cyapa->irq) == 0); + cyapa->irq_wake = (enable_irq_wake(client->irq) == 0); + + mutex_unlock(&input->mutex); + return 0; } -static int cyapa_resume(struct device *dev) +static int __maybe_unused cyapa_resume(struct device *dev) { - int ret; - struct cyapa *cyapa = dev_get_drvdata(dev); + struct i2c_client *client = to_i2c_client(dev); + struct cyapa *cyapa = i2c_get_clientdata(client); + struct input_dev *input = cyapa->input; + u8 power_mode; + int error; + + mutex_lock(&input->mutex); if (device_may_wakeup(dev) && cyapa->irq_wake) - disable_irq_wake(cyapa->irq); + disable_irq_wake(client->irq); + + power_mode = input->users ? PWR_MODE_FULL_ACTIVE : PWR_MODE_OFF; + error = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); + if (error) + dev_warn(dev, "resume: set power mode to %d failed: %d\n", + power_mode, error); + + enable_irq(client->irq); - ret = cyapa_set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE); - if (ret) - dev_warn(dev, "resume active power failed, %d\n", ret); + mutex_unlock(&input->mutex); - enable_irq(cyapa->irq); return 0; } -#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(cyapa_pm_ops, cyapa_suspend, cyapa_resume); @@ -962,7 +986,6 @@ static struct i2c_driver cyapa_driver = { }, .probe = cyapa_probe, - .remove = cyapa_remove, .id_table = cyapa_id_table, }; diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h new file mode 100644 index 000000000000..2e838626205f --- /dev/null +++ b/drivers/input/mouse/elan_i2c.h @@ -0,0 +1,86 @@ +/* + * Elan I2C/SMBus Touchpad driver + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw> + * Version: 1.5.5 + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#ifndef _ELAN_I2C_H +#define _ELAN_i2C_H + +#include <linux/types.h> + +#define ETP_ENABLE_ABS 0x0001 +#define ETP_ENABLE_CALIBRATE 0x0002 +#define ETP_DISABLE_CALIBRATE 0x0000 +#define ETP_DISABLE_POWER 0x0001 + +/* IAP Firmware handling */ +#define ETP_FW_NAME "elan_i2c.bin" +#define ETP_IAP_START_ADDR 0x0083 +#define ETP_FW_IAP_PAGE_ERR (1 << 5) +#define ETP_FW_IAP_INTF_ERR (1 << 4) +#define ETP_FW_PAGE_SIZE 64 +#define ETP_FW_PAGE_COUNT 768 +#define ETP_FW_SIZE (ETP_FW_PAGE_SIZE * ETP_FW_PAGE_COUNT) + +struct i2c_client; +struct completion; + +enum tp_mode { + IAP_MODE = 1, + MAIN_MODE +}; + +struct elan_transport_ops { + int (*initialize)(struct i2c_client *client); + int (*sleep_control)(struct i2c_client *, bool sleep); + int (*power_control)(struct i2c_client *, bool enable); + int (*set_mode)(struct i2c_client *client, u8 mode); + + int (*calibrate)(struct i2c_client *client); + int (*calibrate_result)(struct i2c_client *client, u8 *val); + + int (*get_baseline_data)(struct i2c_client *client, + bool max_baseliune, u8 *value); + + int (*get_version)(struct i2c_client *client, bool iap, u8 *version); + int (*get_sm_version)(struct i2c_client *client, u8 *version); + int (*get_checksum)(struct i2c_client *client, bool iap, u16 *csum); + int (*get_product_id)(struct i2c_client *client, u8 *id); + + int (*get_max)(struct i2c_client *client, + unsigned int *max_x, unsigned int *max_y); + int (*get_resolution)(struct i2c_client *client, + u8 *hw_res_x, u8 *hw_res_y); + int (*get_num_traces)(struct i2c_client *client, + unsigned int *x_tracenum, + unsigned int *y_tracenum); + + int (*iap_get_mode)(struct i2c_client *client, enum tp_mode *mode); + int (*iap_reset)(struct i2c_client *client); + + int (*prepare_fw_update)(struct i2c_client *client); + int (*write_fw_block)(struct i2c_client *client, + const u8 *page, u16 checksum, int idx); + int (*finish_fw_update)(struct i2c_client *client, + struct completion *reset_done); + + int (*get_report)(struct i2c_client *client, u8 *report); +}; + +extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops; + +#endif /* _ELAN_I2C_H */ diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c new file mode 100644 index 000000000000..0cb2be48d537 --- /dev/null +++ b/drivers/input/mouse/elan_i2c_core.c @@ -0,0 +1,1137 @@ +/* + * Elan I2C/SMBus Touchpad driver + * + * Copyright (c) 2013 ELAN Microelectronics Corp. + * + * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw> + * Version: 1.5.5 + * + * Based on cyapa driver: + * copyright (c) 2011-2012 Cypress Semiconductor, Inc. + * copyright (c) 2011-2012 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Trademarks are the property of their respective owners. + */ + +#include <linux/acpi.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/input/mt.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/input.h> +#include <linux/uaccess.h> +#include <linux/jiffies.h> +#include <linux/completion.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <asm/unaligned.h> + +#include "elan_i2c.h" + +#define DRIVER_NAME "elan_i2c" +#define ELAN_DRIVER_VERSION "1.5.5" +#define ETP_PRESSURE_OFFSET 25 +#define ETP_MAX_PRESSURE 255 +#define ETP_FWIDTH_REDUCE 90 +#define ETP_FINGER_WIDTH 15 +#define ETP_RETRY_COUNT 3 + +#define ETP_MAX_FINGERS 5 +#define ETP_FINGER_DATA_LEN 5 +#define ETP_REPORT_ID 0x5D +#define ETP_REPORT_ID_OFFSET 2 +#define ETP_TOUCH_INFO_OFFSET 3 +#define ETP_FINGER_DATA_OFFSET 4 +#define ETP_MAX_REPORT_LEN 34 + +/* The main device structure */ +struct elan_tp_data { + struct i2c_client *client; + struct input_dev *input; + struct regulator *vcc; + + const struct elan_transport_ops *ops; + + /* for fw update */ + struct completion fw_completion; + bool in_fw_update; + + struct mutex sysfs_mutex; + + unsigned int max_x; + unsigned int max_y; + unsigned int width_x; + unsigned int width_y; + unsigned int x_res; + unsigned int y_res; + + u8 product_id; + u8 fw_version; + u8 sm_version; + u8 iap_version; + u16 fw_checksum; + + u8 mode; + + bool irq_wake; + + u8 min_baseline; + u8 max_baseline; + bool baseline_ready; +}; + +static int elan_enable_power(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + error = regulator_enable(data->vcc); + if (error) { + dev_err(&data->client->dev, + "Failed to enable regulator: %d\n", error); + return error; + } + + do { + error = data->ops->power_control(data->client, true); + if (error >= 0) + return 0; + + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int elan_disable_power(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + do { + error = data->ops->power_control(data->client, false); + if (!error) { + error = regulator_disable(data->vcc); + if (error) { + dev_err(&data->client->dev, + "Failed to disable regulator: %d\n", + error); + /* Attempt to power the chip back up */ + data->ops->power_control(data->client, true); + break; + } + + return 0; + } + + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int elan_sleep(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + do { + error = data->ops->sleep_control(data->client, true); + if (!error) + return 0; + + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int __elan_initialize(struct elan_tp_data *data) +{ + struct i2c_client *client = data->client; + int error; + + error = data->ops->initialize(client); + if (error) { + dev_err(&client->dev, "device initialize failed: %d\n", error); + return error; + } + + data->mode |= ETP_ENABLE_ABS; + error = data->ops->set_mode(client, data->mode); + if (error) { + dev_err(&client->dev, + "failed to switch to absolute mode: %d\n", error); + return error; + } + + error = data->ops->sleep_control(client, false); + if (error) { + dev_err(&client->dev, + "failed to wake device up: %d\n", error); + return error; + } + + return 0; +} + +static int elan_initialize(struct elan_tp_data *data) +{ + int repeat = ETP_RETRY_COUNT; + int error; + + do { + error = __elan_initialize(data); + if (!error) + return 0; + + repeat--; + msleep(30); + } while (--repeat > 0); + + return error; +} + +static int elan_query_device_info(struct elan_tp_data *data) +{ + int error; + + error = data->ops->get_product_id(data->client, &data->product_id); + if (error) + return error; + + error = data->ops->get_version(data->client, false, &data->fw_version); + if (error) + return error; + + error = data->ops->get_checksum(data->client, false, + &data->fw_checksum); + if (error) + return error; + + error = data->ops->get_sm_version(data->client, &data->sm_version); + if (error) + return error; + + error = data->ops->get_version(data->client, true, &data->iap_version); + if (error) + return error; + + return 0; +} + +static unsigned int elan_convert_resolution(u8 val) +{ + /* + * (value from firmware) * 10 + 790 = dpi + * + * We also have to convert dpi to dots/mm (*10/254 to avoid floating + * point). + */ + + return ((int)(char)val * 10 + 790) * 10 / 254; +} + +static int elan_query_device_parameters(struct elan_tp_data *data) +{ + unsigned int x_traces, y_traces; + u8 hw_x_res, hw_y_res; + int error; + + error = data->ops->get_max(data->client, &data->max_x, &data->max_y); + if (error) + return error; + + error = data->ops->get_num_traces(data->client, &x_traces, &y_traces); + if (error) + return error; + + data->width_x = data->max_x / x_traces; + data->width_y = data->max_y / y_traces; + + error = data->ops->get_resolution(data->client, &hw_x_res, &hw_y_res); + if (error) + return error; + + data->x_res = elan_convert_resolution(hw_x_res); + data->y_res = elan_convert_resolution(hw_y_res); + + return 0; +} + +/* + ********************************************************** + * IAP firmware updater related routines + ********************************************************** + */ +static int elan_write_fw_block(struct elan_tp_data *data, + const u8 *page, u16 checksum, int idx) +{ + int retry = ETP_RETRY_COUNT; + int error; + + do { + error = data->ops->write_fw_block(data->client, + page, checksum, idx); + if (!error) + return 0; + + dev_dbg(&data->client->dev, + "IAP retrying page %d (error: %d)\n", idx, error); + } while (--retry > 0); + + return error; +} + +static int __elan_update_firmware(struct elan_tp_data *data, + const struct firmware *fw) +{ + struct i2c_client *client = data->client; + struct device *dev = &client->dev; + int i, j; + int error; + u16 iap_start_addr; + u16 boot_page_count; + u16 sw_checksum = 0, fw_checksum = 0; + + error = data->ops->prepare_fw_update(client); + if (error) + return error; + + iap_start_addr = get_unaligned_le16(&fw->data[ETP_IAP_START_ADDR * 2]); + + boot_page_count = (iap_start_addr * 2) / ETP_FW_PAGE_SIZE; + for (i = boot_page_count; i < ETP_FW_PAGE_COUNT; i++) { + u16 checksum = 0; + const u8 *page = &fw->data[i * ETP_FW_PAGE_SIZE]; + + for (j = 0; j < ETP_FW_PAGE_SIZE; j += 2) + checksum += ((page[j + 1] << 8) | page[j]); + + error = elan_write_fw_block(data, page, checksum, i); + if (error) { + dev_err(dev, "write page %d fail: %d\n", i, error); + return error; + } + + sw_checksum += checksum; + } + + /* Wait WDT reset and power on reset */ + msleep(600); + + error = data->ops->finish_fw_update(client, &data->fw_completion); + if (error) + return error; + + error = data->ops->get_checksum(client, true, &fw_checksum); + if (error) + return error; + + if (sw_checksum != fw_checksum) { + dev_err(dev, "checksum diff sw=[%04X], fw=[%04X]\n", + sw_checksum, fw_checksum); + return -EIO; + } + + return 0; +} + +static int elan_update_firmware(struct elan_tp_data *data, + const struct firmware *fw) +{ + struct i2c_client *client = data->client; + int retval; + + dev_dbg(&client->dev, "Starting firmware update....\n"); + + disable_irq(client->irq); + data->in_fw_update = true; + + retval = __elan_update_firmware(data, fw); + if (retval) { + dev_err(&client->dev, "firmware update failed: %d\n", retval); + data->ops->iap_reset(client); + } else { + /* Reinitialize TP after fw is updated */ + elan_initialize(data); + elan_query_device_info(data); + } + + data->in_fw_update = false; + enable_irq(client->irq); + + return retval; +} + +/* + ******************************************************************* + * SYSFS attributes + ******************************************************************* + */ +static ssize_t elan_sysfs_read_fw_checksum(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "0x%04x\n", data->fw_checksum); +} + +static ssize_t elan_sysfs_read_product_id(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->product_id); +} + +static ssize_t elan_sysfs_read_fw_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->fw_version); +} + +static ssize_t elan_sysfs_read_sm_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->sm_version); +} + +static ssize_t elan_sysfs_read_iap_ver(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d.0\n", data->iap_version); +} + +static ssize_t elan_sysfs_update_fw(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct elan_tp_data *data = i2c_get_clientdata(client); + const struct firmware *fw; + int error; + + error = request_firmware(&fw, ETP_FW_NAME, dev); + if (error) { + dev_err(dev, "cannot load firmware %s: %d\n", + ETP_FW_NAME, error); + return error; + } + + /* Firmware must be exactly PAGE_NUM * PAGE_SIZE bytes */ + if (fw->size != ETP_FW_SIZE) { + dev_err(dev, "invalid firmware size = %zu, expected %d.\n", + fw->size, ETP_FW_SIZE); + error = -EBADF; + goto out_release_fw; + } + + error = mutex_lock_interruptible(&data->sysfs_mutex); + if (error) + goto out_release_fw; + + error = elan_update_firmware(data, fw); + + mutex_unlock(&data->sysfs_mutex); + +out_release_fw: + release_firmware(fw); |