summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/via686a.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon/via686a.c')
-rw-r--r--drivers/hwmon/via686a.c28
1 files changed, 15 insertions, 13 deletions
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 05ddc88e7dd2..6f696f897176 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -44,7 +44,7 @@
/* If force_addr is set to anything different from 0, we forcibly enable
the device at the given address. */
-static unsigned short force_addr = 0;
+static unsigned short force_addr;
module_param(force_addr, ushort, 0);
MODULE_PARM_DESC(force_addr,
"Initialize the base address of the sensors");
@@ -198,7 +198,7 @@ static inline u8 FAN_TO_REG(long rpm, int div)
but the function is very linear in the useful range (0-80 deg C), so
we'll just use linear interpolation for 10-bit readings.) So, tempLUT
is the temp at via register values 0-255: */
-static const long tempLUT[] =
+static const s16 tempLUT[] =
{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
@@ -270,7 +270,7 @@ static inline u8 TEMP_TO_REG(long val)
}
/* for 8-bit temperature hyst and over registers */
-#define TEMP_FROM_REG(val) (tempLUT[(val)] * 100)
+#define TEMP_FROM_REG(val) ((long)tempLUT[val] * 100)
/* for 10-bit temperature readings */
static inline long TEMP_FROM_REG10(u16 val)
@@ -589,10 +589,8 @@ static int via686a_detect(struct i2c_adapter *adapter)
u16 val;
/* 8231 requires multiple of 256, we enforce that on 686 as well */
- if (force_addr)
- address = force_addr & 0xFF00;
-
if (force_addr) {
+ address = force_addr & 0xFF00;
dev_warn(&adapter->dev, "forcing ISA address 0x%04X\n",
address);
if (PCIBIOS_SUCCESSFUL !=
@@ -603,11 +601,17 @@ static int via686a_detect(struct i2c_adapter *adapter)
pci_read_config_word(s_bridge, VIA686A_ENABLE_REG, &val))
return -ENODEV;
if (!(val & 0x0001)) {
- dev_warn(&adapter->dev, "enabling sensors\n");
- if (PCIBIOS_SUCCESSFUL !=
- pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
- val | 0x0001))
+ if (force_addr) {
+ dev_info(&adapter->dev, "enabling sensors\n");
+ if (PCIBIOS_SUCCESSFUL !=
+ pci_write_config_word(s_bridge, VIA686A_ENABLE_REG,
+ val | 0x0001))
+ return -ENODEV;
+ } else {
+ dev_warn(&adapter->dev, "sensors disabled - enable "
+ "with force_addr=0x%x\n", address);
return -ENODEV;
+ }
}
/* Reserve the ISA region */
@@ -617,11 +621,10 @@ static int via686a_detect(struct i2c_adapter *adapter)
return -ENODEV;
}
- if (!(data = kmalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit_release;
}
- memset(data, 0, sizeof(struct via686a_data));
new_client = &data->client;
i2c_set_clientdata(new_client, data);
@@ -708,7 +711,6 @@ static int via686a_detach_client(struct i2c_client *client)
return 0;
}
-/* Called when we have found a new VIA686A. Set limits, etc. */
static void via686a_init_client(struct i2c_client *client)
{
u8 reg;