diff options
Diffstat (limited to 'drivers/gpu/drm')
-rw-r--r-- | drivers/gpu/drm/i2c/tda998x_drv.c | 84 |
1 files changed, 46 insertions, 38 deletions
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index f4315bc8d471..f7c414a76538 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -41,7 +41,7 @@ struct tda998x_priv { u8 vip_cntrl_0; u8 vip_cntrl_1; u8 vip_cntrl_2; - struct tda998x_encoder_params params; + struct tda998x_audio_params audio_params; wait_queue_head_t wq_edid; volatile int wq_edid_wait; @@ -666,26 +666,16 @@ tda998x_write_if(struct tda998x_priv *priv, u8 bit, u16 addr, reg_set(priv, REG_DIP_IF_FLAGS, bit); } -static void -tda998x_write_aif(struct tda998x_priv *priv, struct tda998x_encoder_params *p) +static int tda998x_write_aif(struct tda998x_priv *priv, + struct hdmi_audio_infoframe *cea) { union hdmi_infoframe frame; - hdmi_audio_infoframe_init(&frame.audio); - - frame.audio.channels = p->audio_frame[1] & 0x07; - frame.audio.channel_allocation = p->audio_frame[4]; - frame.audio.level_shift_value = (p->audio_frame[5] & 0x78) >> 3; - frame.audio.downmix_inhibit = (p->audio_frame[5] & 0x80) >> 7; - - /* - * L-PCM and IEC61937 compressed audio shall always set sample - * frequency to "refer to stream". For others, see the HDMI - * specification. - */ - frame.audio.sample_frequency = (p->audio_frame[2] & 0x1c) >> 2; + frame.audio = *cea; tda998x_write_if(priv, DIP_IF_FLAGS_IF4, REG_IF4_HB0, &frame); + + return 0; } static void @@ -710,20 +700,21 @@ static void tda998x_audio_mute(struct tda998x_priv *priv, bool on) } } -static void +static int tda998x_configure_audio(struct tda998x_priv *priv, - struct drm_display_mode *mode, struct tda998x_encoder_params *p) + struct tda998x_audio_params *params, + unsigned mode_clock) { u8 buf[6], clksel_aip, clksel_fs, cts_n, adiv; u32 n; /* Enable audio ports */ - reg_write(priv, REG_ENA_AP, p->audio_cfg); - reg_write(priv, REG_ENA_ACLK, p->audio_clk_cfg); + reg_write(priv, REG_ENA_AP, params->config); /* Set audio input source */ - switch (p->audio_format) { + switch (params->format) { case AFMT_SPDIF: + reg_write(priv, REG_ENA_ACLK, 0); reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_SPDIF); clksel_aip = AIP_CLKSEL_AIP_SPDIF; clksel_fs = AIP_CLKSEL_FS_FS64SPDIF; @@ -731,15 +722,29 @@ tda998x_configure_audio(struct tda998x_priv *priv, break; case AFMT_I2S: + reg_write(priv, REG_ENA_ACLK, 1); reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S); clksel_aip = AIP_CLKSEL_AIP_I2S; clksel_fs = AIP_CLKSEL_FS_ACLK; - cts_n = CTS_N_M(3) | CTS_N_K(3); + switch (params->sample_width) { + case 16: + cts_n = CTS_N_M(3) | CTS_N_K(1); + break; + case 18: + case 20: + case 24: + cts_n = CTS_N_M(3) | CTS_N_K(2); + break; + default: + case 32: + cts_n = CTS_N_M(3) | CTS_N_K(3); + break; + } break; default: BUG(); - return; + return -EINVAL; } reg_write(priv, REG_AIP_CLKSEL, clksel_aip); @@ -755,11 +760,11 @@ tda998x_configure_audio(struct tda998x_priv *priv, * assume 100MHz requires larger divider. */ adiv = AUDIO_DIV_SERCLK_8; - if (mode->clock > 100000) + if (mode_clock > 100000) adiv++; /* AUDIO_DIV_SERCLK_16 */ /* S/PDIF asks for a larger divider */ - if (p->audio_format == AFMT_SPDIF) + if (params->format == AFMT_SPDIF) adiv++; /* AUDIO_DIV_SERCLK_16 or _32 */ reg_write(priv, REG_AUDIO_DIV, adiv); @@ -768,7 +773,7 @@ tda998x_configure_audio(struct tda998x_priv *priv, * This is the approximate value of N, which happens to be * the recommended values for non-coherent clocks. */ - n = 128 * p->audio_sample_rate / 1000; + n = 128 * params->sample_rate / 1000; /* Write the CTS and N values */ buf[0] = 0x44; @@ -786,20 +791,21 @@ tda998x_configure_audio(struct tda998x_priv *priv, reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS); reg_clear(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS); - /* Write the channel status */ - buf[0] = IEC958_AES0_CON_NOT_COPYRIGHT; - buf[1] = 0x00; - buf[2] = IEC958_AES3_CON_FS_NOTID; - buf[3] = IEC958_AES4_CON_ORIGFS_NOTID | - IEC958_AES4_CON_MAX_WORDLEN_24; + /* Write the channel status + * The REG_CH_STAT_B-registers skip IEC958 AES2 byte, because + * there is a separate register for each I2S wire. + */ + buf[0] = params->status[0]; + buf[1] = params->status[1]; + buf[2] = params->status[3]; + buf[3] = params->status[4]; reg_write_range(priv, REG_CH_STAT_B(0), buf, 4); tda998x_audio_mute(priv, true); msleep(20); tda998x_audio_mute(priv, false); - /* Write the audio information packet */ - tda998x_write_aif(priv, p); + return tda998x_write_aif(priv, ¶ms->cea); } /* DRM encoder functions */ @@ -820,7 +826,7 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv, VIP_CNTRL_2_SWAP_F(p->swap_f) | (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0); - priv->params = *p; + priv->audio_params = p->audio_params; } static void tda998x_encoder_dpms(struct drm_encoder *encoder, int mode) @@ -1057,9 +1063,11 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder, tda998x_write_avi(priv, adjusted_mode); - if (priv->params.audio_cfg) - tda998x_configure_audio(priv, adjusted_mode, - &priv->params); + if (priv->audio_params.format != AFMT_UNUSED) { + tda998x_configure_audio(priv, + &priv->audio_params, + adjusted_mode->clock); + } } } |