diff options
Diffstat (limited to 'drivers/gpu/drm/mcde/mcde_display.c')
-rw-r--r-- | drivers/gpu/drm/mcde/mcde_display.c | 1142 |
1 files changed, 1142 insertions, 0 deletions
diff --git a/drivers/gpu/drm/mcde/mcde_display.c b/drivers/gpu/drm/mcde/mcde_display.c new file mode 100644 index 000000000000..17dc46d554b0 --- /dev/null +++ b/drivers/gpu/drm/mcde/mcde_display.c @@ -0,0 +1,1142 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Linus Walleij <linus.walleij@linaro.org> + * Parts of this file were based on the MCDE driver by Marcus Lorentzon + * (C) ST-Ericsson SA 2013 + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/dma-buf.h> + +#include <drm/drm_device.h> +#include <drm/drm_fb_cma_helper.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_simple_kms_helper.h> +#include <drm/drm_vblank.h> +#include <video/mipi_display.h> + +#include "mcde_drm.h" +#include "mcde_display_regs.h" + +enum mcde_fifo { + MCDE_FIFO_A, + MCDE_FIFO_B, + /* TODO: implement FIFO C0 and FIFO C1 */ +}; + +enum mcde_channel { + MCDE_CHANNEL_0 = 0, + MCDE_CHANNEL_1, + MCDE_CHANNEL_2, + MCDE_CHANNEL_3, +}; + +enum mcde_extsrc { + MCDE_EXTSRC_0 = 0, + MCDE_EXTSRC_1, + MCDE_EXTSRC_2, + MCDE_EXTSRC_3, + MCDE_EXTSRC_4, + MCDE_EXTSRC_5, + MCDE_EXTSRC_6, + MCDE_EXTSRC_7, + MCDE_EXTSRC_8, + MCDE_EXTSRC_9, +}; + +enum mcde_overlay { + MCDE_OVERLAY_0 = 0, + MCDE_OVERLAY_1, + MCDE_OVERLAY_2, + MCDE_OVERLAY_3, + MCDE_OVERLAY_4, + MCDE_OVERLAY_5, +}; + +enum mcde_dsi_formatter { + MCDE_DSI_FORMATTER_0 = 0, + MCDE_DSI_FORMATTER_1, + MCDE_DSI_FORMATTER_2, +}; + +void mcde_display_irq(struct mcde *mcde) +{ + u32 mispp, misovl, mischnl; + bool vblank; + + /* Handle display IRQs */ + mispp = readl(mcde->regs + MCDE_MISPP); + misovl = readl(mcde->regs + MCDE_MISOVL); + mischnl = readl(mcde->regs + MCDE_MISCHNL); + + /* + * Handle IRQs from the DSI link. All IRQs from the DSI links + * are just latched onto the MCDE IRQ line, so we need to traverse + * any active DSI masters and check if an IRQ is originating from + * them. + * + * TODO: Currently only one DSI link is supported. + */ + if (mcde_dsi_irq(mcde->mdsi)) { + u32 val; + + /* + * In oneshot mode we do not send continuous updates + * to the display, instead we only push out updates when + * the update function is called, then we disable the + * flow on the channel once we get the TE IRQ. + */ + if (mcde->oneshot_mode) { + spin_lock(&mcde->flow_lock); + if (--mcde->flow_active == 0) { + dev_dbg(mcde->dev, "TE0 IRQ\n"); + /* Disable FIFO A flow */ + val = readl(mcde->regs + MCDE_CRA0); + val &= ~MCDE_CRX0_FLOEN; + writel(val, mcde->regs + MCDE_CRA0); + } + spin_unlock(&mcde->flow_lock); + } + } + + /* Vblank from one of the channels */ + if (mispp & MCDE_PP_VCMPA) { + dev_dbg(mcde->dev, "chnl A vblank IRQ\n"); + vblank = true; + } + if (mispp & MCDE_PP_VCMPB) { + dev_dbg(mcde->dev, "chnl B vblank IRQ\n"); + vblank = true; + } + if (mispp & MCDE_PP_VCMPC0) + dev_dbg(mcde->dev, "chnl C0 vblank IRQ\n"); + if (mispp & MCDE_PP_VCMPC1) + dev_dbg(mcde->dev, "chnl C1 vblank IRQ\n"); + if (mispp & MCDE_PP_VSCC0) + dev_dbg(mcde->dev, "chnl C0 TE IRQ\n"); + if (mispp & MCDE_PP_VSCC1) + dev_dbg(mcde->dev, "chnl C1 TE IRQ\n"); + writel(mispp, mcde->regs + MCDE_RISPP); + + if (vblank) + drm_crtc_handle_vblank(&mcde->pipe.crtc); + + if (misovl) + dev_info(mcde->dev, "some stray overlay IRQ %08x\n", misovl); + writel(misovl, mcde->regs + MCDE_RISOVL); + + if (mischnl) + dev_info(mcde->dev, "some stray channel error IRQ %08x\n", + mischnl); + writel(mischnl, mcde->regs + MCDE_RISCHNL); +} + +void mcde_display_disable_irqs(struct mcde *mcde) +{ + /* Disable all IRQs */ + writel(0, mcde->regs + MCDE_IMSCPP); + writel(0, mcde->regs + MCDE_IMSCOVL); + writel(0, mcde->regs + MCDE_IMSCCHNL); + + /* Clear any pending IRQs */ + writel(0xFFFFFFFF, mcde->regs + MCDE_RISPP); + writel(0xFFFFFFFF, mcde->regs + MCDE_RISOVL); + writel(0xFFFFFFFF, mcde->regs + MCDE_RISCHNL); +} + +static int mcde_display_check(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *pstate, + struct drm_crtc_state *cstate) +{ + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *old_fb = pipe->plane.state->fb; + struct drm_framebuffer *fb = pstate->fb; + + if (fb) { + u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0); + + /* FB base address must be dword aligned. */ + if (offset & 3) { + DRM_DEBUG_KMS("FB not 32-bit aligned\n"); + return -EINVAL; + } + + /* + * There's no pitch register, the mode's hdisplay + * controls this. + */ + if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) { + DRM_DEBUG_KMS("can't handle pitches\n"); + return -EINVAL; + } + + /* + * We can't change the FB format in a flicker-free + * manner (and only update it during CRTC enable). + */ + if (old_fb && old_fb->format != fb->format) + cstate->mode_changed = true; + } + + return 0; +} + +static int mcde_configure_extsrc(struct mcde *mcde, enum mcde_extsrc src, + u32 format) +{ + u32 val; + u32 conf; + u32 cr; + + switch (src) { + case MCDE_EXTSRC_0: + conf = MCDE_EXTSRC0CONF; + cr = MCDE_EXTSRC0CR; + break; + case MCDE_EXTSRC_1: + conf = MCDE_EXTSRC1CONF; + cr = MCDE_EXTSRC1CR; + break; + case MCDE_EXTSRC_2: + conf = MCDE_EXTSRC2CONF; + cr = MCDE_EXTSRC2CR; + break; + case MCDE_EXTSRC_3: + conf = MCDE_EXTSRC3CONF; + cr = MCDE_EXTSRC3CR; + break; + case MCDE_EXTSRC_4: + conf = MCDE_EXTSRC4CONF; + cr = MCDE_EXTSRC4CR; + break; + case MCDE_EXTSRC_5: + conf = MCDE_EXTSRC5CONF; + cr = MCDE_EXTSRC5CR; + break; + case MCDE_EXTSRC_6: + conf = MCDE_EXTSRC6CONF; + cr = MCDE_EXTSRC6CR; + break; + case MCDE_EXTSRC_7: + conf = MCDE_EXTSRC7CONF; + cr = MCDE_EXTSRC7CR; + break; + case MCDE_EXTSRC_8: + conf = MCDE_EXTSRC8CONF; + cr = MCDE_EXTSRC8CR; + break; + case MCDE_EXTSRC_9: + conf = MCDE_EXTSRC9CONF; + cr = MCDE_EXTSRC9CR; + break; + } + + /* + * Configure external source 0 one buffer (buffer 0) + * primary overlay ID 0. + * From mcde_hw.c ovly_update_registers() in the vendor tree + */ + val = 0 << MCDE_EXTSRCXCONF_BUF_ID_SHIFT; + val |= 1 << MCDE_EXTSRCXCONF_BUF_NB_SHIFT; + val |= 0 << MCDE_EXTSRCXCONF_PRI_OVLID_SHIFT; + /* + * MCDE has inverse semantics from DRM on RBG/BGR which is why + * all the modes are inversed here. + */ + switch (format) { + case DRM_FORMAT_ARGB8888: + val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_ABGR8888: + val |= MCDE_EXTSRCXCONF_BPP_ARGB8888 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_XRGB8888: + val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_XBGR8888: + val |= MCDE_EXTSRCXCONF_BPP_XRGB8888 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_RGB888: + val |= MCDE_EXTSRCXCONF_BPP_RGB888 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_BGR888: + val |= MCDE_EXTSRCXCONF_BPP_RGB888 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_ARGB4444: + val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_ABGR4444: + val |= MCDE_EXTSRCXCONF_BPP_ARGB4444 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_XRGB4444: + val |= MCDE_EXTSRCXCONF_BPP_RGB444 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_XBGR4444: + val |= MCDE_EXTSRCXCONF_BPP_RGB444 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_XRGB1555: + val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_XBGR1555: + val |= MCDE_EXTSRCXCONF_BPP_IRGB1555 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_RGB565: + val |= MCDE_EXTSRCXCONF_BPP_RGB565 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + val |= MCDE_EXTSRCXCONF_BGR; + break; + case DRM_FORMAT_BGR565: + val |= MCDE_EXTSRCXCONF_BPP_RGB565 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + case DRM_FORMAT_YUV422: + val |= MCDE_EXTSRCXCONF_BPP_YCBCR422 << + MCDE_EXTSRCXCONF_BPP_SHIFT; + break; + default: + dev_err(mcde->dev, "Unknown pixel format 0x%08x\n", + format); + return -EINVAL; + } + writel(val, mcde->regs + conf); + + /* Software select, primary */ + val = MCDE_EXTSRCXCR_SEL_MOD_SOFTWARE_SEL; + val |= MCDE_EXTSRCXCR_MULTIOVL_CTRL_PRIMARY; + writel(val, mcde->regs + cr); + + return 0; +} + +static void mcde_configure_overlay(struct mcde *mcde, enum mcde_overlay ovl, + enum mcde_extsrc src, + enum mcde_channel ch, + const struct drm_display_mode *mode, + u32 format) +{ + u32 val; + u32 conf1; + u32 conf2; + u32 crop; + u32 ljinc; + u32 cr; + u32 comp; + + switch (ovl) { + case MCDE_OVERLAY_0: + conf1 = MCDE_OVL0CONF; + conf2 = MCDE_OVL0CONF2; + crop = MCDE_OVL0CROP; + ljinc = MCDE_OVL0LJINC; + cr = MCDE_OVL0CR; + comp = MCDE_OVL0COMP; + break; + case MCDE_OVERLAY_1: + conf1 = MCDE_OVL1CONF; + conf2 = MCDE_OVL1CONF2; + crop = MCDE_OVL1CROP; + ljinc = MCDE_OVL1LJINC; + cr = MCDE_OVL1CR; + comp = MCDE_OVL1COMP; + break; + case MCDE_OVERLAY_2: + conf1 = MCDE_OVL2CONF; + conf2 = MCDE_OVL2CONF2; + crop = MCDE_OVL2CROP; + ljinc = MCDE_OVL2LJINC; + cr = MCDE_OVL2CR; + comp = MCDE_OVL2COMP; + break; + case MCDE_OVERLAY_3: + conf1 = MCDE_OVL3CONF; + conf2 = MCDE_OVL3CONF2; + crop = MCDE_OVL3CROP; + ljinc = MCDE_OVL3LJINC; + cr = MCDE_OVL3CR; + comp = MCDE_OVL3COMP; + break; + case MCDE_OVERLAY_4: + conf1 = MCDE_OVL4CONF; + conf2 = MCDE_OVL4CONF2; + crop = MCDE_OVL4CROP; + ljinc = MCDE_OVL4LJINC; + cr = MCDE_OVL4CR; + comp = MCDE_OVL4COMP; + break; + case MCDE_OVERLAY_5: + conf1 = MCDE_OVL5CONF; + conf2 = MCDE_OVL5CONF2; + crop = MCDE_OVL5CROP; + ljinc = MCDE_OVL5LJINC; + cr = MCDE_OVL5CR; + comp = MCDE_OVL5COMP; + break; + } + + val = mode->hdisplay << MCDE_OVLXCONF_PPL_SHIFT; + val |= mode->vdisplay << MCDE_OVLXCONF_LPF_SHIFT; + /* Use external source 0 that we just configured */ + val |= src << MCDE_OVLXCONF_EXTSRC_ID_SHIFT; + writel(val, mcde->regs + conf1); + + val = MCDE_OVLXCONF2_BP_PER_PIXEL_ALPHA; + val |= 0xff << MCDE_OVLXCONF2_ALPHAVALUE_SHIFT; + /* OPQ: overlay is opaque */ + switch (format) { + case DRM_FORMAT_ARGB8888: + case DRM_FORMAT_ABGR8888: + case DRM_FORMAT_ARGB4444: + case DRM_FORMAT_ABGR4444: + case DRM_FORMAT_XRGB1555: + case DRM_FORMAT_XBGR1555: + /* No OPQ */ + break; + case DRM_FORMAT_XRGB8888: + case DRM_FORMAT_XBGR8888: + case DRM_FORMAT_RGB888: + case DRM_FORMAT_BGR888: + case DRM_FORMAT_RGB565: + case DRM_FORMAT_BGR565: + case DRM_FORMAT_YUV422: + val |= MCDE_OVLXCONF2_OPQ; + break; + default: + dev_err(mcde->dev, "Unknown pixel format 0x%08x\n", + format); + break; + } + /* The default watermark level for overlay 0 is 48 */ + val |= 48 << MCDE_OVLXCONF2_PIXELFETCHERWATERMARKLEVEL_SHIFT; + writel(val, mcde->regs + conf2); + + /* Number of bytes to fetch per line */ + writel(mcde->stride, mcde->regs + ljinc); + /* No cropping */ + writel(0, mcde->regs + crop); + + /* Set up overlay control register */ + val = MCDE_OVLXCR_OVLEN; + val |= MCDE_OVLXCR_COLCCTRL_DISABLED; + val |= MCDE_OVLXCR_BURSTSIZE_8W << + MCDE_OVLXCR_BURSTSIZE_SHIFT; + val |= MCDE_OVLXCR_MAXOUTSTANDING_8_REQ << + MCDE_OVLXCR_MAXOUTSTANDING_SHIFT; + /* Not using rotation but set it up anyways */ + val |= MCDE_OVLXCR_ROTBURSTSIZE_8W << + MCDE_OVLXCR_ROTBURSTSIZE_SHIFT; + writel(val, mcde->regs + cr); + + /* + * Set up the overlay compositor to route the overlay out to + * the desired channel + */ + val = ch << MCDE_OVLXCOMP_CH_ID_SHIFT; + writel(val, mcde->regs + comp); +} + +static void mcde_configure_channel(struct mcde *mcde, enum mcde_channel ch, + enum mcde_fifo fifo, + const struct drm_display_mode *mode) +{ + u32 val; + u32 conf; + u32 sync; + u32 stat; + u32 bgcol; + u32 mux; + + switch (ch) { + case MCDE_CHANNEL_0: + conf = MCDE_CHNL0CONF; + sync = MCDE_CHNL0SYNCHMOD; + stat = MCDE_CHNL0STAT; + bgcol = MCDE_CHNL0BCKGNDCOL; + mux = MCDE_CHNL0MUXING; + break; + case MCDE_CHANNEL_1: + conf = MCDE_CHNL1CONF; + sync = MCDE_CHNL1SYNCHMOD; + stat = MCDE_CHNL1STAT; + bgcol = MCDE_CHNL1BCKGNDCOL; + mux = MCDE_CHNL1MUXING; + break; + case MCDE_CHANNEL_2: + conf = MCDE_CHNL2CONF; + sync = MCDE_CHNL2SYNCHMOD; + stat = MCDE_CHNL2STAT; + bgcol = MCDE_CHNL2BCKGNDCOL; + mux = MCDE_CHNL2MUXING; + break; + case MCDE_CHANNEL_3: + conf = MCDE_CHNL3CONF; + sync = MCDE_CHNL3SYNCHMOD; + stat = MCDE_CHNL3STAT; + bgcol = MCDE_CHNL3BCKGNDCOL; + mux = MCDE_CHNL3MUXING; + return; + } + + /* Set up channel 0 sync (based on chnl_update_registers()) */ + if (mcde->te_sync) { + /* + * Turn on hardware TE0 synchronization + */ + val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_HARDWARE + << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT; + val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_TE0 + << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT; + } else { + /* + * Set up sync source to software, out sync formatter + * Code mostly from mcde_hw.c chnl_update_registers() + */ + val = MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SOFTWARE + << MCDE_CHNLXSYNCHMOD_SRC_SYNCH_SHIFT; + val |= MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_FORMATTER + << MCDE_CHNLXSYNCHMOD_OUT_SYNCH_SRC_SHIFT; + } + writel(val, mcde->regs + sync); + + /* Set up pixels per line and lines per frame */ + val = (mode->hdisplay - 1) << MCDE_CHNLXCONF_PPL_SHIFT; + val |= (mode->vdisplay - 1) << MCDE_CHNLXCONF_LPF_SHIFT; + writel(val, mcde->regs + conf); + + /* + * Normalize color conversion: + * black background, OLED conversion disable on channel + */ + val = MCDE_CHNLXSTAT_CHNLBLBCKGND_EN | + MCDE_CHNLXSTAT_CHNLRD; + writel(val, mcde->regs + stat); + writel(0, mcde->regs + bgcol); + + /* Set up muxing: connect the channel to the desired FIFO */ + switch (fifo) { + case MCDE_FIFO_A: + writel(MCDE_CHNLXMUXING_FIFO_ID_FIFO_A, + mcde->regs + mux); + break; + case MCDE_FIFO_B: + writel(MCDE_CHNLXMUXING_FIFO_ID_FIFO_B, + mcde->regs + mux); + break; + } +} + +static void mcde_configure_fifo(struct mcde *mcde, enum mcde_fifo fifo, + enum mcde_dsi_formatter fmt, + int fifo_wtrmrk) +{ + u32 val; + u32 ctrl; + u32 cr0, cr1; + + switch (fifo) { + case MCDE_FIFO_A: + ctrl = MCDE_CTRLA; + cr0 = MCDE_CRA0; + cr1 = MCDE_CRA1; + break; + case MCDE_FIFO_B: + ctrl = MCDE_CTRLB; + cr0 = MCDE_CRB0; + cr1 = MCDE_CRB1; + break; + } + + val = fifo_wtrmrk << MCDE_CTRLX_FIFOWTRMRK_SHIFT; + /* We only support DSI formatting for now */ + val |= MCDE_CTRLX_FORMTYPE_DSI << + MCDE_CTRLX_FORMTYPE_SHIFT; + + /* Select the formatter to use for this FIFO */ + val |= fmt << MCDE_CTRLX_FORMID_SHIFT; + writel(val, mcde->regs + ctrl); + + /* Blend source with Alpha 0xff on FIFO */ + val = MCDE_CRX0_BLENDEN | + 0xff << MCDE_CRX0_ALPHABLEND_SHIFT; + writel(val, mcde->regs + cr0); + + /* Set-up from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */ + + /* Use the MCDE clock for this FIFO */ + val = MCDE_CRX1_CLKSEL_MCDECLK << MCDE_CRX1_CLKSEL_SHIFT; + + /* TODO: when adding DPI support add OUTBPP etc here */ + writel(val, mcde->regs + cr1); +}; + +static void mcde_configure_dsi_formatter(struct mcde *mcde, + enum mcde_dsi_formatter fmt, + u32 formatter_frame, + int pkt_size) +{ + u32 val; + u32 conf0; + u32 frame; + u32 pkt; + u32 sync; + u32 cmdw; + u32 delay0, delay1; + + switch (fmt) { + case MCDE_DSI_FORMATTER_0: + conf0 = MCDE_DSIVID0CONF0; + frame = MCDE_DSIVID0FRAME; + pkt = MCDE_DSIVID0PKT; + sync = MCDE_DSIVID0SYNC; + cmdw = MCDE_DSIVID0CMDW; + delay0 = MCDE_DSIVID0DELAY0; + delay1 = MCDE_DSIVID0DELAY1; + break; + case MCDE_DSI_FORMATTER_1: + conf0 = MCDE_DSIVID1CONF0; + frame = MCDE_DSIVID1FRAME; + pkt = MCDE_DSIVID1PKT; + sync = MCDE_DSIVID1SYNC; + cmdw = MCDE_DSIVID1CMDW; + delay0 = MCDE_DSIVID1DELAY0; + delay1 = MCDE_DSIVID1DELAY1; + break; + case MCDE_DSI_FORMATTER_2: + conf0 = MCDE_DSIVID2CONF0; + frame = MCDE_DSIVID2FRAME; + pkt = MCDE_DSIVID2PKT; + sync = MCDE_DSIVID2SYNC; + cmdw = MCDE_DSIVID2CMDW; + delay0 = MCDE_DSIVID2DELAY0; + delay1 = MCDE_DSIVID2DELAY1; + break; + } + + /* + * Enable formatter + * 8 bit commands and DCS commands (notgen = not generic) + */ + val = MCDE_DSICONF0_CMD8 | MCDE_DSICONF0_DCSVID_NOTGEN; + if (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) + val |= MCDE_DSICONF0_VID_MODE_VID; + switch (mcde->mdsi->format) { + case MIPI_DSI_FMT_RGB888: + val |= MCDE_DSICONF0_PACKING_RGB888 << + MCDE_DSICONF0_PACKING_SHIFT; + break; + case MIPI_DSI_FMT_RGB666: + val |= MCDE_DSICONF0_PACKING_RGB666 << + MCDE_DSICONF0_PACKING_SHIFT; + break; + case MIPI_DSI_FMT_RGB666_PACKED: + val |= MCDE_DSICONF0_PACKING_RGB666_PACKED << + MCDE_DSICONF0_PACKING_SHIFT; + break; + case MIPI_DSI_FMT_RGB565: + val |= MCDE_DSICONF0_PACKING_RGB565 << + MCDE_DSICONF0_PACKING_SHIFT; + break; + default: + dev_err(mcde->dev, "unknown DSI format\n"); + return; + } + writel(val, mcde->regs + conf0); + + writel(formatter_frame, mcde->regs + frame); + writel(pkt_size, mcde->regs + pkt); + writel(0, mcde->regs + sync); + /* Define the MIPI command: we want to write into display memory */ + val = MIPI_DCS_WRITE_MEMORY_CONTINUE << + MCDE_DSIVIDXCMDW_CMDW_CONTINUE_SHIFT; + val |= MIPI_DCS_WRITE_MEMORY_START << + MCDE_DSIVIDXCMDW_CMDW_START_SHIFT; + writel(val, mcde->regs + cmdw); + + /* + * FIXME: the vendor driver has some hack around this value in + * CMD mode with autotrig. + */ + writel(0, mcde->regs + delay0); + writel(0, mcde->regs + delay1); +} + +static void mcde_enable_fifo(struct mcde *mcde, enum mcde_fifo fifo) +{ + u32 val; + u32 cr; + + switch (fifo) { + case MCDE_FIFO_A: + cr = MCDE_CRA0; + break; + case MCDE_FIFO_B: + cr = MCDE_CRB0; + break; + default: + dev_err(mcde->dev, "cannot enable FIFO %c\n", + 'A' + fifo); + return; + } + + spin_lock(&mcde->flow_lock); + val = readl(mcde->regs + cr); + val |= MCDE_CRX0_FLOEN; + writel(val, mcde->regs + cr); + mcde->flow_active++; + spin_unlock(&mcde->flow_lock); +} + +static void mcde_disable_fifo(struct mcde *mcde, enum mcde_fifo fifo, + bool wait_for_drain) +{ + int timeout = 100; + u32 val; + u32 cr; + + switch (fifo) { + case MCDE_FIFO_A: + cr = MCDE_CRA0; + break; + case MCDE_FIFO_B: + cr = MCDE_CRB0; + break; + default: + dev_err(mcde->dev, "cannot disable FIFO %c\n", + 'A' + fifo); + return; + } + + spin_lock(&mcde->flow_lock); + val = readl(mcde->regs + cr); + val &= ~MCDE_CRX0_FLOEN; + writel(val, mcde->regs + cr); + mcde->flow_active = 0; + spin_unlock(&mcde->flow_lock); + + if (!wait_for_drain) + return; + + /* Check that we really drained and stopped the flow */ + while (readl(mcde->regs + cr) & MCDE_CRX0_FLOEN) { + usleep_range(1000, 1500); + if (!--timeout) { + dev_err(mcde->dev, + "FIFO timeout while clearing FIFO %c\n", + 'A' + fifo); + return; + } + } +} + +/* + * This drains a pipe i.e. a FIFO connected to a certain channel + */ +static void mcde_drain_pipe(struct mcde *mcde, enum mcde_fifo fifo, + enum mcde_channel ch) +{ + u32 val; + u32 ctrl; + u32 synsw; + + switch (fifo) { + case MCDE_FIFO_A: + ctrl = MCDE_CTRLA; + break; + case MCDE_FIFO_B: + ctrl = MCDE_CTRLB; + break; + } + + switch (ch) { + case MCDE_CHANNEL_0: + synsw = MCDE_CHNL0SYNCHSW; + break; + case MCDE_CHANNEL_1: + synsw = MCDE_CHNL1SYNCHSW; + break; + case MCDE_CHANNEL_2: + synsw = MCDE_CHNL2SYNCHSW; + break; + case MCDE_CHANNEL_3: + synsw = MCDE_CHNL3SYNCHSW; + return; + } + + val = readl(mcde->regs + ctrl); + if (!(val & MCDE_CTRLX_FIFOEMPTY)) { + dev_err(mcde->dev, "Channel A FIFO not empty (handover)\n"); + /* Attempt to clear the FIFO */ + mcde_enable_fifo(mcde, fifo); + /* Trigger a software sync out on respective channel (0-3) */ + writel(MCDE_CHNLXSYNCHSW_SW_TRIG, mcde->regs + synsw); + /* Disable FIFO A flow again */ + mcde_disable_fifo(mcde, fifo, true); + } +} + +static int mcde_dsi_get_pkt_div(int ppl, int fifo_size) +{ + /* + * DSI command mode line packets should be split into an even number of + * packets smaller than or equal to the fifo size. + */ + int div; + const int max_div = DIV_ROUND_UP(MCDE_MAX_WIDTH, fifo_size); + + for (div = 1; div < max_div; div++) + if (ppl % div == 0 && ppl / div <= fifo_size) + return div; + return 1; +} + +static void mcde_display_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *cstate, + struct drm_plane_state *plane_state) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_plane *plane = &pipe->plane; + struct drm_device *drm = crtc->dev; + struct mcde *mcde = drm->dev_private; + const struct drm_display_mode *mode = &cstate->mode; + struct drm_framebuffer *fb = plane->state->fb; + u32 format = fb->format->format; + u32 formatter_ppl = mode->hdisplay; /* pixels per line */ + u32 formatter_lpf = mode->vdisplay; /* lines per frame */ + int pkt_size, fifo_wtrmrk; + int cpp = drm_format_plane_cpp(format, 0); + int formatter_cpp; + struct drm_format_name_buf tmp; + u32 formatter_frame; + u32 pkt_div; + u32 val; + + dev_info(drm->dev, "enable MCDE, %d x %d format %s\n", + mode->hdisplay, mode->vdisplay, + drm_get_format_name(format, &tmp)); + if (!mcde->mdsi) { + /* TODO: deal with this for non-DSI output */ + dev_err(drm->dev, "no DSI master attached!\n"); + return; + } + + dev_info(drm->dev, "output in %s mode, format %dbpp\n", + (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) ? + "VIDEO" : "CMD", + mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format)); + formatter_cpp = + mipi_dsi_pixel_format_to_bpp(mcde->mdsi->format) / 8; + dev_info(drm->dev, "overlay CPP %d bytes, DSI CPP %d bytes\n", + cpp, + formatter_cpp); + + /* Calculations from mcde_fmtr_dsi.c, fmtr_dsi_enable_video() */ + + /* + * Set up FIFO A watermark level: + * 128 for LCD 32bpp video mode + * 48 for LCD 32bpp command mode + * 128 for LCD 16bpp video mode + * 64 for LCD 16bpp command mode + * 128 for HDMI 32bpp + * 192 for HDMI 16bpp + */ + fifo_wtrmrk = mode->hdisplay; + if (mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) { + fifo_wtrmrk = min(fifo_wtrmrk, 128); + pkt_div = 1; + } else { + fifo_wtrmrk = min(fifo_wtrmrk, 48); + /* The FIFO is 640 entries deep on this v3 hardware */ + pkt_div = mcde_dsi_get_pkt_div(mode->hdisplay, 640); + } + dev_dbg(drm->dev, "FIFO watermark after flooring: %d bytes\n", + fifo_wtrmrk); + dev_dbg(drm->dev, "Packet divisor: %d bytes\n", pkt_div); + + /* NOTE: pkt_div is 1 for video mode */ + pkt_size = (formatter_ppl * formatter_cpp) / pkt_div; + /* Commands CMD8 need one extra byte */ + if (!(mcde->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO)) + pkt_size++; + + dev_dbg(drm->dev, "DSI packet size: %d * %d bytes per line\n", + pkt_size, pkt_div); + dev_dbg(drm->dev, "Overlay frame size: %u bytes\n", + mode->hdisplay * mode->vdisplay * cpp); + mcde->stride = mode->hdisplay * cpp; + dev_dbg(drm->dev, "Overlay line stride: %u bytes\n", + mcde->stride); + /* NOTE: pkt_div is 1 for video mode */ + formatter_frame = pkt_size * pkt_div * formatter_lpf; + dev_dbg(drm->dev, "Formatter frame size: %u bytes\n", formatter_frame); + + /* Drain the FIFO A + channel 0 pipe so we have a clean slate */ + mcde_drain_pipe(mcde, MCDE_FIFO_A, MCDE_CHANNEL_0); + + /* + * We set up our display pipeline: + * EXTSRC 0 -> OVERLAY 0 -> CHANNEL 0 -> FIFO A -> DSI FORMATTER 0 + * + * First configure the external source (memory) on external source 0 + * using the desired bitstream/bitmap format + */ + mcde_configure_extsrc(mcde, MCDE_EXTSRC_0, format); + + /* + * Configure overlay 0 according to format and mode and take input + * from external source 0 and route the output of this overlay to + * channel 0 + */ + mcde_configure_overlay(mcde, MCDE_OVERLAY_0, MCDE_EXTSRC_0, + MCDE_CHANNEL_0, mode, format); + + /* + * Configure pixel-per-line and line-per-frame for channel 0 and then + * route channel 0 to FIFO A + */ + mcde_configure_channel(mcde, MCDE_CHANNEL_0, MCDE_FIFO_A, mode); + + /* Configure FIFO A to use DSI formatter 0 */ + mcde_configure_fifo(mcde, MCDE_FIFO_A, MCDE_DSI_FORMATTER_0, + fifo_wtrmrk); + + /* Configure the DSI formatter 0 for the DSI panel output */ + mcde_configure_dsi_formatter(mcde, MCDE_DSI_FORMATTER_0, + formatter_frame, pkt_size); + + if (mcde->te_sync) { + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + val = MCDE_VSCRC_VSPOL; + else + val = 0; + writel(val, mcde->regs + MCDE_VSCRC0); + /* Enable VSYNC capture on TE0 */ + val = readl(mcde->regs + MCDE_CRC); + val |= MCDE_CRC_SYCEN0; + writel(val, mcde->regs + MCDE_CRC); + + drm_crtc_vblank_on(crtc); + } + + dev_info(drm->dev, "MCDE display is enabled\n"); +} + +static void mcde_display_disable(struct drm_simple_display_pipe *pipe) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct mcde *mcde = drm->dev_private; + + if (mcde->te_sync) + drm_crtc_vblank_off(crtc); + + /* Disable FIFO A flow */ + mcde_disable_fifo(mcde, MCDE_FIFO_A, true); + + dev_info(drm->dev, "MCDE display is disabled\n"); +} + +static void mcde_display_send_one_frame(struct mcde *mcde) +{ + /* Request a TE ACK */ + if (mcde->te_sync) + mcde_dsi_te_request(mcde->mdsi); + + /* Enable FIFO A flow */ + mcde_enable_fifo(mcde, MCDE_FIFO_A); + + if (mcde->te_sync) { + /* + * If oneshot mode is enabled, the flow will be disabled + * when the TE0 IRQ arrives in the interrupt handler. Otherwise + * updates are continuously streamed to the display after this + * point. + */ + dev_dbg(mcde->dev, "sent TE0 framebuffer update\n"); + return; + } + + /* Trigger a software sync out on channel 0 */ + writel(MCDE_CHNLXSYNCHSW_SW_TRIG, + mcde->regs + MCDE_CHNL0SYNCHSW); + + /* + * Disable FIFO A flow again: since we are using TE sync we + * need to wait for the FIFO to drain before we continue + * so repeated calls to this function will not cause a mess + * in the hardware by pushing updates will updates are going + * on already. + */ + mcde_disable_fifo(mcde, MCDE_FIFO_A, true); + + dev_dbg(mcde->dev, "sent SW framebuffer update\n"); +} + +static void mcde_set_extsrc(struct mcde *mcde, u32 buffer_address) +{ + /* Write bitmap base address to register */ + writel(buffer_address, mcde->regs + MCDE_EXTSRCXA0); + /* + * Base address for next line this is probably only used + * in interlace modes. + */ + writel(buffer_address + mcde->stride, mcde->regs + MCDE_EXTSRCXA1); +} + +static void mcde_display_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_pstate) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct mcde *mcde = drm->dev_private; + struct drm_pending_vblank_event *event = crtc->state->event; + struct drm_plane *plane = &pipe->plane; + struct drm_plane_state *pstate = plane->state; + struct drm_framebuffer *fb = pstate->fb; + + /* + * Handle any pending event first, we need to arm the vblank + * interrupt before sending any update to the display so we don't + * miss the interrupt. + */ + if (event) { + crtc->state->event = NULL; + + spin_lock_irq(&crtc->dev->event_lock); + /* + * Hardware must be on before we can arm any vblank event, + * this is not a scanout controller where there is always + * some periodic update going on, it is completely frozen + * until we get an update. If MCDE output isn't yet enabled, + * we just send a vblank dummy event back. + */ + if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) { + dev_dbg(mcde->dev, "arm vblank event\n"); + drm_crtc_arm_vblank_event(crtc, event); + } else { + dev_dbg(mcde->dev, "insert fake vblank event\n"); + drm_crtc_send_vblank_event(crtc, event); + } + + spin_unlock_irq(&crtc->dev->event_lock); + } + + /* + * We do not start sending framebuffer updates before the + * display is enabled. Update events will however be dispatched + * from the DRM core before the display is enabled. + */ + if (fb) { + mcde_set_extsrc(mcde, drm_fb_cma_get_gem_addr(fb, pstate, 0)); + /* Send a single frame using software sync */ + mcde_display_send_one_frame(mcde); + dev_info_once(mcde->dev, "sent first display update\n"); + } else { + /* + * If an update is receieved before the MCDE is enabled + * (before mcde_display_enable() is called) we can't really + * do much with that buffer. + */ + dev_info(mcde->dev, "ignored a display update\n"); + } +} + +static int mcde_display_enable_vblank(struct drm_simple_display_pipe *pipe) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct mcde *mcde = drm->dev_private; + u32 val; + + /* Enable all VBLANK IRQs */ + val = MCDE_PP_VCMPA | + MCDE_PP_VCMPB | + MCDE_PP_VSCC0 | + MCDE_PP_VSCC1 | + MCDE_PP_VCMPC0 | + MCDE_PP_VCMPC1; + writel(val, mcde->regs + MCDE_IMSCPP); + + return 0; +} + +static void mcde_display_disable_vblank(struct drm_simple_display_pipe *pipe) +{ + struct drm_crtc *crtc = &pipe->crtc; + struct drm_device *drm = crtc->dev; + struct mcde *mcde = drm->dev_private; + + /* Disable all VBLANK IRQs */ + writel(0, mcde->regs + MCDE_IMSCPP); + /* Clear any pending IRQs */ + writel(0xFFFFFFFF, mcde->regs + MCDE_RISPP); +} + +static struct drm_simple_display_pipe_funcs mcde_display_funcs = { + .check = mcde_display_check, + .enable = mcde_display_enable, + .disable = mcde_display_disable, + .update = mcde_display_update, + .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb, +}; + +int mcde_display_init(struct drm_device *drm) +{ + struct mcde *mcde = drm->dev_private; + int ret; + static const u32 formats[] = { + DRM_FORMAT_ARGB8888, + DRM_FORMAT_ABGR8888, + DRM_FORMAT_XRGB8888, + DRM_FORMAT_XBGR8888, + DRM_FORMAT_RGB888, + DRM_FORMAT_BGR888, + DRM_FORMAT_ARGB4444, + DRM_FORMAT_ABGR4444, + DRM_FORMAT_XRGB4444, + DRM_FORMAT_XBGR4444, + /* These are actually IRGB1555 so intensity bit is lost */ + DRM_FORMAT_XRGB1555, + DRM_FORMAT_XBGR1555, + DRM_FORMAT_RGB565, + DRM_FORMAT_BGR565, + DRM_FORMAT_YUV422, + }; + + /* Provide vblank only when we have TE enabled */ + if (mcde->te_sync) { + mcde_display_funcs.enable_vblank = mcde_display_enable_vblank; + mcde_display_funcs.disable_vblank = mcde_display_disable_vblank; + } + + ret = drm_simple_display_pipe_init(drm, &mcde->pipe, + &mcde_display_funcs, + formats, ARRAY_SIZE(formats), + NULL, + mcde->connector); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(mcde_display_init); |