summaryrefslogtreecommitdiffstats
path: root/drivers/firmware/arm_scmi/sensors.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/firmware/arm_scmi/sensors.c')
-rw-r--r--drivers/firmware/arm_scmi/sensors.c720
1 files changed, 668 insertions, 52 deletions
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index b4232d611033..4541b891b733 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -2,21 +2,30 @@
/*
* System Control and Management Interface (SCMI) Sensor Protocol
*
- * Copyright (C) 2018 ARM Ltd.
+ * Copyright (C) 2018-2020 ARM Ltd.
*/
#define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt
+#include <linux/bitfield.h>
#include <linux/scmi_protocol.h>
#include "common.h"
#include "notify.h"
+#define SCMI_MAX_NUM_SENSOR_AXIS 63
+#define SCMIv2_SENSOR_PROTOCOL 0x10000
+
enum scmi_sensor_protocol_cmd {
SENSOR_DESCRIPTION_GET = 0x3,
SENSOR_TRIP_POINT_NOTIFY = 0x4,
SENSOR_TRIP_POINT_CONFIG = 0x5,
SENSOR_READING_GET = 0x6,
+ SENSOR_AXIS_DESCRIPTION_GET = 0x7,
+ SENSOR_LIST_UPDATE_INTERVALS = 0x8,
+ SENSOR_CONFIG_GET = 0x9,
+ SENSOR_CONFIG_SET = 0xA,
+ SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB,
};
struct scmi_msg_resp_sensor_attributes {
@@ -28,29 +37,106 @@ struct scmi_msg_resp_sensor_attributes {
__le32 reg_size;
};
+/* v3 attributes_low macros */
+#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x))
+#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x))
+#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x))
+#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x))
+
+/* v2 attributes_high macros */
+#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x))
+#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x))
+
+/* v3 attributes_high macros */
+#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x))
+#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x))
+
+/* v3 resolution macros */
+#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x))
+#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x))
+
+struct scmi_msg_resp_attrs {
+ __le32 min_range_low;
+ __le32 min_range_high;
+ __le32 max_range_low;
+ __le32 max_range_high;
+};
+
struct scmi_msg_resp_sensor_description {
__le16 num_returned;
__le16 num_remaining;
- struct {
+ struct scmi_sensor_descriptor {
__le32 id;
__le32 attributes_low;
-#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31))
-#define NUM_TRIP_POINTS(x) ((x) & 0xff)
+/* Common attributes_low macros */
+#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x))
+#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x))
__le32 attributes_high;
-#define SENSOR_TYPE(x) ((x) & 0xff)
-#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f)
-#define SENSOR_SCALE_SIGN BIT(4)
-#define SENSOR_SCALE_EXTEND GENMASK(7, 5)
-#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f)
-#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f)
- u8 name[SCMI_MAX_STR_SIZE];
- } desc[0];
+/* Common attributes_high macros */
+#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x))
+#define SENSOR_SCALE_SIGN BIT(4)
+#define SENSOR_SCALE_EXTEND GENMASK(31, 5)
+#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x))
+ u8 name[SCMI_MAX_STR_SIZE];
+ /* only for version > 2.0 */
+ __le32 power;
+ __le32 resolution;
+ struct scmi_msg_resp_attrs scalar_attrs;
+ } desc[];
};
-struct scmi_msg_sensor_trip_point_notify {
+/* Base scmi_sensor_descriptor size excluding extended attrs after name */
+#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ 28
+
+/* Sign extend to a full s32 */
+#define S32_EXT(v) \
+ ({ \
+ int __v = (v); \
+ \
+ if (__v & SENSOR_SCALE_SIGN) \
+ __v |= SENSOR_SCALE_EXTEND; \
+ __v; \
+ })
+
+struct scmi_msg_sensor_axis_description_get {
+ __le32 id;
+ __le32 axis_desc_index;
+};
+
+struct scmi_msg_resp_sensor_axis_description {
+ __le32 num_axis_flags;
+#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x))
+#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x))
+ struct scmi_axis_descriptor {
+ __le32 id;
+ __le32 attributes_low;
+ __le32 attributes_high;
+ u8 name[SCMI_MAX_STR_SIZE];
+ __le32 resolution;
+ struct scmi_msg_resp_attrs attrs;
+ } desc[];
+};
+
+/* Base scmi_axis_descriptor size excluding extended attrs after name */
+#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28
+
+struct scmi_msg_sensor_list_update_intervals {
+ __le32 id;
+ __le32 index;
+};
+
+struct scmi_msg_resp_sensor_list_update_intervals {
+ __le32 num_intervals_flags;
+#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x))
+#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x))
+#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x))
+ __le32 intervals[];
+};
+
+struct scmi_msg_sensor_request_notify {
__le32 id;
__le32 event_control;
-#define SENSOR_TP_NOTIFY_ALL BIT(0)
+#define SENSOR_NOTIFY_ALL BIT(0)
};
struct scmi_msg_set_sensor_trip_point {
@@ -66,18 +152,46 @@ struct scmi_msg_set_sensor_trip_point {
__le32 value_high;
};
+struct scmi_msg_sensor_config_set {
+ __le32 id;
+ __le32 sensor_config;
+};
+
struct scmi_msg_sensor_reading_get {
__le32 id;
__le32 flags;
#define SENSOR_READ_ASYNC BIT(0)
};
+struct scmi_resp_sensor_reading_complete {
+ __le32 id;
+ __le64 readings;
+};
+
+struct scmi_sensor_reading_resp {
+ __le32 sensor_value_low;
+ __le32 sensor_value_high;
+ __le32 timestamp_low;
+ __le32 timestamp_high;
+};
+
+struct scmi_resp_sensor_reading_complete_v3 {
+ __le32 id;
+ struct scmi_sensor_reading_resp readings[];
+};
+
struct scmi_sensor_trip_notify_payld {
__le32 agent_id;
__le32 sensor_id;
__le32 trip_point_desc;
};
+struct scmi_sensor_update_notify_payld {
+ __le32 agent_id;
+ __le32 sensor_id;
+ struct scmi_sensor_reading_resp readings[];
+};
+
struct sensors_info {
u32 version;
int num_sensors;
@@ -114,6 +228,194 @@ static int scmi_sensor_attributes_get(const struct scmi_handle *handle,
return ret;
}
+static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out,
+ struct scmi_msg_resp_attrs *in)
+{
+ out->min_range = get_unaligned_le64((void *)&in->min_range_low);
+ out->max_range = get_unaligned_le64((void *)&in->max_range_low);
+}
+
+static int scmi_sensor_update_intervals(const struct scmi_handle *handle,
+ struct scmi_sensor_info *s)
+{
+ int ret, cnt;
+ u32 desc_index = 0;
+ u16 num_returned, num_remaining;
+ struct scmi_xfer *ti;
+ struct scmi_msg_resp_sensor_list_update_intervals *buf;
+ struct scmi_msg_sensor_list_update_intervals *msg;
+
+ ret = scmi_xfer_get_init(handle, SENSOR_LIST_UPDATE_INTERVALS,
+ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &ti);
+ if (ret)
+ return ret;
+
+ buf = ti->rx.buf;
+ do {
+ u32 flags;
+
+ msg = ti->tx.buf;
+ /* Set the number of sensors to be skipped/already read */
+ msg->id = cpu_to_le32(s->id);
+ msg->index = cpu_to_le32(desc_index);
+
+ ret = scmi_do_xfer(handle, ti);
+ if (ret)
+ break;
+
+ flags = le32_to_cpu(buf->num_intervals_flags);
+ num_returned = NUM_INTERVALS_RETURNED(flags);
+ num_remaining = NUM_INTERVALS_REMAINING(flags);
+
+ /*
+ * Max intervals is not declared previously anywhere so we
+ * assume it's returned+remaining.
+ */
+ if (!s->intervals.count) {
+ s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags);
+ s->intervals.count = num_returned + num_remaining;
+ /* segmented intervals are reported in one triplet */
+ if (s->intervals.segmented &&
+ (num_remaining || num_returned != 3)) {
+ dev_err(handle->dev,
+ "Sensor ID:%d advertises an invalid segmented interval (%d)\n",
+ s->id, s->intervals.count);
+ s->intervals.segmented = false;
+ s->intervals.count = 0;
+ ret = -EINVAL;
+ break;
+ }
+ /* Direct allocation when exceeding pre-allocated */
+ if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) {
+ s->intervals.desc =
+ devm_kcalloc(handle->dev,
+ s->intervals.count,
+ sizeof(*s->intervals.desc),
+ GFP_KERNEL);
+ if (!s->intervals.desc) {
+ s->intervals.segmented = false;
+ s->intervals.count = 0;
+ ret = -ENOMEM;
+ break;
+ }
+ }
+ } else if (desc_index + num_returned > s->intervals.count) {
+ dev_err(handle->dev,
+ "No. of update intervals can't exceed %d\n",
+ s->intervals.count);
+ ret = -EINVAL;
+ break;
+ }
+
+ for (cnt = 0; cnt < num_returned; cnt++)
+ s->intervals.desc[desc_index + cnt] =
+ le32_to_cpu(buf->intervals[cnt]);
+
+ desc_index += num_returned;
+
+ scmi_reset_rx_to_maxsz(handle, ti);
+ /*
+ * check for both returned and remaining to avoid infinite
+ * loop due to buggy firmware
+ */
+ } while (num_returned && num_remaining);
+
+ scmi_xfer_put(handle, ti);
+ return ret;
+}
+
+static int scmi_sensor_axis_description(const struct scmi_handle *handle,
+ struct scmi_sensor_info *s)
+{
+ int ret, cnt;
+ u32 desc_index = 0;
+ u16 num_returned, num_remaining;
+ struct scmi_xfer *te;
+ struct scmi_msg_resp_sensor_axis_description *buf;
+ struct scmi_msg_sensor_axis_description_get *msg;
+
+ s->axis = devm_kcalloc(handle->dev, s->num_axis,
+ sizeof(*s->axis), GFP_KERNEL);
+ if (!s->axis)
+ return -ENOMEM;
+
+ ret = scmi_xfer_get_init(handle, SENSOR_AXIS_DESCRIPTION_GET,
+ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &te);
+ if (ret)
+ return ret;
+
+ buf = te->rx.buf;
+ do {
+ u32 flags;
+ struct scmi_axis_descriptor *adesc;
+
+ msg = te->tx.buf;
+ /* Set the number of sensors to be skipped/already read */
+ msg->id = cpu_to_le32(s->id);
+ msg->axis_desc_index = cpu_to_le32(desc_index);
+
+ ret = scmi_do_xfer(handle, te);
+ if (ret)
+ break;
+
+ flags = le32_to_cpu(buf->num_axis_flags);
+ num_returned = NUM_AXIS_RETURNED(flags);
+ num_remaining = NUM_AXIS_REMAINING(flags);
+
+ if (desc_index + num_returned > s->num_axis) {
+ dev_err(handle->dev, "No. of axis can't exceed %d\n",
+ s->num_axis);
+ break;
+ }
+
+ adesc = &buf->desc[0];
+ for (cnt = 0; cnt < num_returned; cnt++) {
+ u32 attrh, attrl;
+ struct scmi_sensor_axis_info *a;
+ size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ;
+
+ attrl = le32_to_cpu(adesc->attributes_low);
+
+ a = &s->axis[desc_index + cnt];
+
+ a->id = le32_to_cpu(adesc->id);
+ a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);
+
+ attrh = le32_to_cpu(adesc->attributes_high);
+ a->scale = S32_EXT(SENSOR_SCALE(attrh));
+ a->type = SENSOR_TYPE(attrh);
+ strlcpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
+
+ if (a->extended_attrs) {
+ unsigned int ares =
+ le32_to_cpu(adesc->resolution);
+
+ a->resolution = SENSOR_RES(ares);
+ a->exponent =
+ S32_EXT(SENSOR_RES_EXP(ares));
+ dsize += sizeof(adesc->resolution);
+
+ scmi_parse_range_attrs(&a->attrs,
+ &adesc->attrs);
+ dsize += sizeof(adesc->attrs);
+ }
+
+ adesc = (typeof(adesc))((u8 *)adesc + dsize);
+ }
+
+ desc_index += num_returned;
+
+ scmi_reset_rx_to_maxsz(handle, te);
+ /*
+ * check for both returned and remaining to avoid infinite
+ * loop due to buggy firmware
+ */
+ } while (num_returned && num_remaining);
+
+ scmi_xfer_put(handle, te);
+ return ret;
+}
+
static int scmi_sensor_description_get(const struct scmi_handle *handle,
struct sensors_info *si)
{
@@ -131,9 +433,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
buf = t->rx.buf;
do {
+ struct scmi_sensor_descriptor *sdesc;
+
/* Set the number of sensors to be skipped/already read */
put_unaligned_le32(desc_index, t->tx.buf);
-
ret = scmi_do_xfer(handle, t);
if (ret)
break;
@@ -147,22 +450,97 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
break;
}
+ sdesc = &buf->desc[0];
for (cnt = 0; cnt < num_returned; cnt++) {
u32 attrh, attrl;
struct scmi_sensor_info *s;
+ size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ;
- attrl = le32_to_cpu(buf->desc[cnt].attributes_low);
- attrh = le32_to_cpu(buf->desc[cnt].attributes_high);
s = &si->sensors[desc_index + cnt];
- s->id = le32_to_cpu(buf->desc[cnt].id);
- s->type = SENSOR_TYPE(attrh);
- s->scale = SENSOR_SCALE(attrh);
- /* Sign extend to a full s8 */
- if (s->scale & SENSOR_SCALE_SIGN)
- s->scale |= SENSOR_SCALE_EXTEND;
+ s->id = le32_to_cpu(sdesc->id);
+
+ attrl = le32_to_cpu(sdesc->attributes_low);
+ /* common bitfields parsing */
s->async = SUPPORTS_ASYNC_READ(attrl);
s->num_trip_points = NUM_TRIP_POINTS(attrl);
- strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
+ /**
+ * only SCMIv3.0 specific bitfield below.
+ * Such bitfields are assumed to be zeroed on non
+ * relevant fw versions...assuming fw not buggy !
+ */
+ s->update = SUPPORTS_UPDATE_NOTIFY(attrl);
+ s->timestamped = SUPPORTS_TIMESTAMP(attrl);
+ if (s->timestamped)
+ s->tstamp_scale =
+ S32_EXT(SENSOR_TSTAMP_EXP(attrl));
+ s->extended_scalar_attrs =
+ SUPPORTS_EXTEND_ATTRS(attrl);
+
+ attrh = le32_to_cpu(sdesc->attributes_high);
+ /* common bitfields parsing */
+ s->scale = S32_EXT(SENSOR_SCALE(attrh));
+ s->type = SENSOR_TYPE(attrh);
+ /* Use pre-allocated pool wherever possible */
+ s->intervals.desc = s->intervals.prealloc_pool;
+ if (si->version == SCMIv2_SENSOR_PROTOCOL) {
+ s->intervals.segmented = false;
+ s->intervals.count = 1;
+ /*
+ * Convert SCMIv2.0 update interval format to
+ * SCMIv3.0 to be used as the common exposed
+ * descriptor, accessible via common macros.
+ */
+ s->intervals.desc[0] =
+ (SENSOR_UPDATE_BASE(attrh) << 5) |
+ SENSOR_UPDATE_SCALE(attrh);
+ } else {
+ /*
+ * From SCMIv3.0 update intervals are retrieved
+ * via a dedicated (optional) command.
+ * Since the command is optional, on error carry
+ * on without any update interval.
+ */
+ if (scmi_sensor_update_intervals(handle, s))
+ dev_dbg(handle->dev,
+ "Update Intervals not available for sensor ID:%d\n",
+ s->id);
+ }
+ /**
+ * only > SCMIv2.0 specific bitfield below.
+ * Such bitfields are assumed to be zeroed on non
+ * relevant fw versions...assuming fw not buggy !
+ */
+ s->num_axis = min_t(unsigned int,
+ SUPPORTS_AXIS(attrh) ?
+ SENSOR_AXIS_NUMBER(attrh) : 0,
+ SCMI_MAX_NUM_SENSOR_AXIS);
+ strlcpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
+
+ if (s->extended_scalar_attrs) {
+ s->sensor_power = le32_to_cpu(sdesc->power);
+ dsize += sizeof(sdesc->power);
+ /* Only for sensors reporting scalar values */
+ if (s->num_axis == 0) {
+ unsigned int sres =
+ le32_to_cpu(sdesc->resolution);
+
+ s->resolution = SENSOR_RES(sres);
+ s->exponent =
+ S32_EXT(SENSOR_RES_EXP(sres));
+ dsize += sizeof(sdesc->resolution);
+
+ scmi_parse_range_attrs(&s->scalar_attrs,
+ &sdesc->scalar_attrs);
+ dsize += sizeof(sdesc->scalar_attrs);
+ }
+ }
+ if (s->num_axis > 0) {
+ ret = scmi_sensor_axis_description(handle, s);
+ if (ret)
+ goto out;
+ }
+
+ sdesc = (typeof(sdesc))((u8 *)sdesc + dsize);
}
desc_index += num_returned;
@@ -174,19 +552,21 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
*/
} while (num_returned && num_remaining);
+out:
scmi_xfer_put(handle, t);
return ret;
}
-static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
- u32 sensor_id, bool enable)
+static inline int
+scmi_sensor_request_notify(const struct scmi_handle *handle, u32 sensor_id,
+ u8 message_id, bool enable)
{
int ret;
- u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0;
+ u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0;
struct scmi_xfer *t;
- struct scmi_msg_sensor_trip_point_notify *cfg;
+ struct scmi_msg_sensor_request_notify *cfg;
- ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY,
+ ret = scmi_xfer_get_init(handle, message_id,
SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t);
if (ret)
return ret;
@@ -201,6 +581,23 @@ static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
return ret;
}
+static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle,
+ u32 sensor_id, bool enable)
+{
+ return scmi_sensor_request_notify(handle, sensor_id,
+ SENSOR_TRIP_POINT_NOTIFY,
+ enable);
+}
+
+static int
+scmi_sensor_continuous_update_notify(const struct scmi_handle *handle,
+ u32 sensor_id, bool enable)
+{
+ return scmi_sensor_request_notify(handle, sensor_id,
+ SENSOR_CONTINUOUS_UPDATE_NOTIFY,
+ enable);
+}
+
static int
scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
u8 trip_id, u64 trip_value)
@@ -227,6 +624,75 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id,
return ret;
}
+static int scmi_sensor_config_get(const struct scmi_handle *handle,
+ u32 sensor_id, u32 *sensor_config)
+{
+ int ret;
+ struct scmi_xfer *t;
+
+ ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_GET,
+ SCMI_PROTOCOL_SENSOR, sizeof(__le32),
+ sizeof(__le32), &t);
+ if (ret)
+ return ret;
+
+ put_unaligned_le32(cpu_to_le32(sensor_id), t->tx.buf);
+ ret = scmi_do_xfer(handle, t);
+ if (!ret) {
+ struct sensors_info *si = handle->sensor_priv;
+ struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+ *sensor_config = get_unaligned_le64(t->rx.buf);
+ s->sensor_config = *sensor_config;
+ }
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
+static int scmi_sensor_config_set(const struct scmi_handle *handle,
+ u32 sensor_id, u32 sensor_config)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_sensor_config_set *msg;
+
+ ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET,
+ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &t);
+ if (ret)
+ return ret;
+
+ msg = t->tx.buf;
+ msg->id = cpu_to_le32(sensor_id);
+ msg->sensor_config = cpu_to_le32(sensor_config);
+
+ ret = scmi_do_xfer(handle, t);
+ if (!ret) {
+ struct sensors_info *si = handle->sensor_priv;
+ struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+ s->sensor_config = sensor_config;
+ }
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
+/**
+ * scmi_sensor_reading_get - Read scalar sensor value
+ * @handle: Platform handle
+ * @sensor_id: Sensor ID
+ * @value: The 64bit value sensor reading
+ *
+ * This function returns a single 64 bit reading value representing the sensor
+ * value; if the platform SCMI Protocol implementation and the sensor support
+ * multiple axis and timestamped-reads, this just returns the first axis while
+ * dropping the timestamp value.
+ * Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of
+ * timestamped multi-axis values.
+ *
+ * Return: 0 on Success
+ */
static int scmi_sensor_reading_get(const struct scmi_handle *handle,
u32 sensor_id, u64 *value)
{
@@ -237,20 +703,24 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle,
struct scmi_sensor_info *s = si->sensors + sensor_id;
ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
- SCMI_PROTOCOL_SENSOR, sizeof(*sensor),
- sizeof(u64), &t);
+ SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t);
if (ret)
return ret;
sensor = t->tx.buf;
sensor->id = cpu_to_le32(sensor_id);
-
if (s->async) {
sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
ret = scmi_do_xfer_with_response(handle, t);
- if (!ret)
- *value = get_unaligned_le64((void *)
- ((__le32 *)t->rx.buf + 1));
+ if (!ret) {
+ struct scmi_resp_sensor_reading_complete *resp;
+
+ resp = t->rx.buf;
+ if (le32_to_cpu(resp->id) == sensor_id)
+ *value = get_unaligned_le64(&resp->readings);
+ else
+ ret = -EPROTO;
+ }
} else {
sensor->flags = cpu_to_le32(0);
ret = scmi_do_xfer(handle, t);
@@ -262,6 +732,84 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle,
return ret;
}
+static inline void
+scmi_parse_sensor_readings(struct scmi_sensor_reading *out,
+ const struct scmi_sensor_reading_resp *in)
+{
+ out->value = get_unaligned_le64((void *)&in->sensor_value_low);
+ out->timestamp = get_unaligned_le64((void *)&in->timestamp_low);
+}
+
+/**
+ * scmi_sensor_reading_get_timestamped - Read multiple-axis timestamped values
+ * @handle: Platform handle
+ * @sensor_id: Sensor ID
+ * @count: The length of the provided @readings array
+ * @readings: An array of elements each representing a timestamped per-axis
+ * reading of type @struct scmi_sensor_reading.
+ * Returned readings are ordered as the @axis descriptors array
+ * included in @struct scmi_sensor_info and the max number of
+ * returned elements is min(@count, @num_axis); ideally the provided
+ * array should be of length @count equal to @num_axis.
+ *
+ * Return: 0 on Success
+ */
+static int
+scmi_sensor_reading_get_timestamped(const struct scmi_handle *handle,
+ u32 sensor_id, u8 count,
+ struct scmi_sensor_reading *readings)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_sensor_reading_get *sensor;
+ struct sensors_info *si = handle->sensor_priv;
+ struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+ if (!count || !readings ||
+ (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis))
+ return -EINVAL;
+
+ ret = scmi_xfer_get_init(handle, SENSOR_READING_GET,
+ SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t);
+ if (ret)
+ return ret;
+
+ sensor = t->tx.buf;
+ sensor->id = cpu_to_le32(sensor_id);
+ if (s->async) {
+ sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
+ ret = scmi_do_xfer_with_response(handle, t);
+ if (!ret) {
+ int i;
+ struct scmi_resp_sensor_reading_complete_v3 *resp;
+
+ resp = t->rx.buf;
+ /* Retrieve only the number of requested axis anyway */
+ if (le32_to_cpu(resp->id) == sensor_id)
+ for (i = 0; i < count; i++)
+ scmi_parse_sensor_readings(&readings[i],
+ &resp->readings[i]);
+ else
+ ret = -EPROTO;
+ }
+ } else {
+ sensor->flags = cpu_to_le32(0);
+ ret = scmi_do_xfer(handle, t);
+ if (!ret) {
+ int i;
+ struct scmi_sensor_reading_resp *resp_readings;
+
+ resp_readings = t->rx.buf;
+ for (i = 0; i < count; i++)
+ scmi_parse_sensor_readings(&readings[i],
+ &resp_readings[i]);
+ }
+ }
+
+ scmi_xfer_put(handle, t);
+ return ret;
+}
+
static const struct scmi_sensor_info *
scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id)
{
@@ -282,6 +830,9 @@ static const struct scmi_sensor_ops sensor_ops = {
.info_get = scmi_sensor_info_get,
.trip_point_config = scmi_sensor_trip_point_config,
.reading_get = scmi_sensor_reading_get,
+ .reading_get_timestamped = scmi_sensor_reading_get_timestamped,
+ .config_get = scmi_sensor_config_get,
+ .config_set = scmi_sensor_config_set,
};
static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
@@ -289,7 +840,19 @@ static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle,
{
int ret;
- ret = scmi_sensor_trip_point_notify(handle, src_id, enable);
+ switch (evt_id) {
+ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
+ ret = scmi_sensor_trip_point_notify(handle, src_id, enable);
+ break;
+ case SCMI_EVENT_SENSOR_UPDATE:
+ ret = scmi_sensor_continuous_update_notify(handle, src_id,
+ enable);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
if (ret)
pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
evt_id, src_id, ret);
@@ -302,20 +865,59 @@ static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle,
const void *payld, size_t payld_sz,
void *report, u32 *src_id)
{
- const struct scmi_sensor_trip_notify_payld *p = payld;
- struct scmi_sensor_trip_point_report *r = report;
+ void *rep = NULL;
+
+ switch (evt_id) {
+ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
+ {
+ const struct scmi_sensor_trip_notify_payld *p = payld;
+ struct scmi_sensor_trip_point_report *r = report;
- if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT ||
- sizeof(*p) != payld_sz)
- return NULL;
+ if (sizeof(*p) != payld_sz)
+ break;
- r->timestamp = timestamp;
- r->agent_id = le32_to_cpu(p->agent_id);
- r->sensor_id = le32_to_cpu(p->sensor_id);
- r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
- *src_id = r->sensor_id;
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ r->sensor_id = le32_to_cpu(p->sensor_id);
+ r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
+ *src_id = r->sensor_id;
+ rep = r;
+ break;
+ }
+ case SCMI_EVENT_SENSOR_UPDATE:
+ {
+ int i;
+ struct scmi_sensor_info *s;
+ const struct scmi_sensor_update_notify_payld *p = payld;
+ struct scmi_sensor_update_report *r = report;
+ struct sensors_info *sinfo = handle->sensor_priv;
+
+ /* payld_sz is variable for this event */
+ r->sensor_id = le32_to_cpu(p->sensor_id);
+ if (r->sensor_id >= sinfo->num_sensors)
+ break;
+ r->timestamp = timestamp;
+ r->agent_id = le32_to_cpu(p->agent_id);
+ s = &sinfo->sensors[r->sensor_id];
+ /*
+ * The generated report r (@struct scmi_sensor_update_report)
+ * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS
+ * readings: here it is filled with the effective @num_axis
+ * readings defined for this sensor or 1 for scalar sensors.
+ */
+ r->readings_count = s->num_axis ?: 1;
+ for (i = 0; i < r->readings_count; i++)
+ scmi_parse_sensor_readings(&r->readings[i],
+ &p->readings[i]);
+ *src_id = r->sensor_id;
+ rep = r;
+ break;
+ }
+ default:
+ break;
+ }
- return r;
+ return rep;
}
static const struct scmi_event sensor_events[] = {
@@ -324,6 +926,16 @@ static const struct scmi_event sensor_events[] = {
.max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld),
.max_report_sz = sizeof(struct scmi_sensor_trip_point_report),
},
+ {
+ .id = SCMI_EVENT_SENSOR_UPDATE,
+ .max_payld_sz =
+ sizeof(struct scmi_sensor_update_notify_payld) +
+ SCMI_MAX_NUM_SENSOR_AXIS *
+ sizeof(struct scmi_sensor_reading_resp),
+ .max_report_sz = sizeof(struct scmi_sensor_update_report) +
+ SCMI_MAX_NUM_SENSOR_AXIS *
+ sizeof(struct scmi_sensor_reading),
+ },
};
static const struct scmi_event_ops sensor_event_ops = {
@@ -334,6 +946,7 @@ static const struct scmi_event_ops sensor_event_ops = {
static int scmi_sensors_protocol_init(struct scmi_handle *handle)
{
u32 version;
+ int ret;
struct sensors_info *sinfo;
scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version);
@@ -344,15 +957,19 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle)
sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL);
if (!sinfo)
return -ENOMEM;
+ sinfo->version = version;
- scmi_sensor_attributes_get(handle, sinfo);
-
+ ret = scmi_sensor_attributes_get(handle, sinfo);
+ if (ret)
+ return ret;
sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors,
sizeof(*sinfo->sensors), GFP_KERNEL);
if (!sinfo->sensors)
return -ENOMEM;
- scmi_sensor_description_get(handle, sinfo);
+ ret = scmi_sensor_description_get(handle, sinfo);
+ if (ret)
+ return ret;
scmi_register_protocol_events(handle,
SCMI_PROTOCOL_SENSOR, SCMI_PROTO_QUEUE_SZ,
@@ -360,9 +977,8 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle)
ARRAY_SIZE(sensor_events),
sinfo->num_sensors);
- sinfo->version = version;
- handle->sensor_ops = &sensor_ops;
handle->sensor_priv = sinfo;
+ handle->sensor_ops = &sensor_ops;
return 0;
}