summaryrefslogtreecommitdiffstats
path: root/drivers/extcon/extcon-axp288.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/extcon/extcon-axp288.c')
-rw-r--r--drivers/extcon/extcon-axp288.c176
1 files changed, 168 insertions, 8 deletions
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 3ec4c715e240..a983708b77a6 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -1,6 +1,7 @@
/*
* extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
*
+ * Copyright (c) 2017-2018 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2015 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*
@@ -14,6 +15,7 @@
* GNU General Public License for more details.
*/
+#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
@@ -25,6 +27,11 @@
#include <linux/extcon-provider.h>
#include <linux/regmap.h>
#include <linux/mfd/axp20x.h>
+#include <linux/usb/role.h>
+#include <linux/workqueue.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
/* Power source status register */
#define PS_STAT_VBUS_TRIGGER BIT(0)
@@ -97,9 +104,19 @@ struct axp288_extcon_info {
struct device *dev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
+ struct usb_role_switch *role_sw;
+ struct work_struct role_work;
int irq[EXTCON_IRQ_END];
struct extcon_dev *edev;
+ struct extcon_dev *id_extcon;
+ struct notifier_block id_nb;
unsigned int previous_cable;
+ bool vbus_attach;
+};
+
+static const struct x86_cpu_id cherry_trail_cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT, X86_FEATURE_ANY },
+ {}
};
/* Power up/down reason string array */
@@ -137,20 +154,74 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}
-static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
+/*
+ * The below code to control the USB role-switch on devices with an AXP288
+ * may seem out of place, but there are 2 reasons why this is the best place
+ * to control the USB role-switch on such devices:
+ * 1) On many devices the USB role is controlled by AML code, but the AML code
+ * only switches between the host and none roles, because of Windows not
+ * really using device mode. To make device mode work we need to toggle
+ * between the none/device roles based on Vbus presence, and this driver
+ * gets interrupts on Vbus insertion / removal.
+ * 2) In order for our BC1.2 charger detection to work properly the role
+ * mux must be properly set to device mode before we do the detection.
+ */
+
+/* Returns the id-pin value, note pulled low / false == host-mode */
+static bool axp288_get_id_pin(struct axp288_extcon_info *info)
{
- int ret, stat, cfg, pwr_stat;
- u8 chrg_type;
- unsigned int cable = info->previous_cable;
- bool vbus_attach = false;
+ enum usb_role role;
+
+ if (info->id_extcon)
+ return extcon_get_state(info->id_extcon, EXTCON_USB_HOST) <= 0;
+
+ /* We cannot access the id-pin, see what mode the AML code has set */
+ role = usb_role_switch_get_role(info->role_sw);
+ return role != USB_ROLE_HOST;
+}
+
+static void axp288_usb_role_work(struct work_struct *work)
+{
+ struct axp288_extcon_info *info =
+ container_of(work, struct axp288_extcon_info, role_work);
+ enum usb_role role;
+ bool id_pin;
+ int ret;
+
+ id_pin = axp288_get_id_pin(info);
+ if (!id_pin)
+ role = USB_ROLE_HOST;
+ else if (info->vbus_attach)
+ role = USB_ROLE_DEVICE;
+ else
+ role = USB_ROLE_NONE;
+
+ ret = usb_role_switch_set_role(info->role_sw, role);
+ if (ret)
+ dev_err(info->dev, "failed to set role: %d\n", ret);
+}
+
+static bool axp288_get_vbus_attach(struct axp288_extcon_info *info)
+{
+ int ret, pwr_stat;
ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
if (ret < 0) {
dev_err(info->dev, "failed to read vbus status\n");
- return ret;
+ return false;
}
- vbus_attach = (pwr_stat & PS_STAT_VBUS_VALID);
+ return !!(pwr_stat & PS_STAT_VBUS_VALID);
+}
+
+static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
+{
+ int ret, stat, cfg;
+ u8 chrg_type;
+ unsigned int cable = info->previous_cable;
+ bool vbus_attach = false;
+
+ vbus_attach = axp288_get_vbus_attach(info);
if (!vbus_attach)
goto no_vbus;
@@ -201,6 +272,12 @@ no_vbus:
info->previous_cable = cable;
}
+ if (info->role_sw && info->vbus_attach != vbus_attach) {
+ info->vbus_attach = vbus_attach;
+ /* Setting the role can take a while */
+ queue_work(system_long_wq, &info->role_work);
+ }
+
return 0;
dev_det_ret:
@@ -210,6 +287,18 @@ dev_det_ret:
return ret;
}
+static int axp288_extcon_id_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_extcon_info *info =
+ container_of(nb, struct axp288_extcon_info, id_nb);
+
+ /* We may not sleep and setting the role can take a while */
+ queue_work(system_long_wq, &info->role_work);
+
+ return NOTIFY_OK;
+}
+
static irqreturn_t axp288_extcon_isr(int irq, void *data)
{
struct axp288_extcon_info *info = data;
@@ -231,10 +320,20 @@ static void axp288_extcon_enable(struct axp288_extcon_info *info)
BC_GLOBAL_RUN, BC_GLOBAL_RUN);
}
+static void axp288_put_role_sw(void *data)
+{
+ struct axp288_extcon_info *info = data;
+
+ cancel_work_sync(&info->role_work);
+ usb_role_switch_put(info->role_sw);
+}
+
static int axp288_extcon_probe(struct platform_device *pdev)
{
struct axp288_extcon_info *info;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ const char *name;
int ret, i, pirq;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
@@ -245,9 +344,33 @@ static int axp288_extcon_probe(struct platform_device *pdev)
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->previous_cable = EXTCON_NONE;
+ INIT_WORK(&info->role_work, axp288_usb_role_work);
+ info->id_nb.notifier_call = axp288_extcon_id_evt;
platform_set_drvdata(pdev, info);
+ info->role_sw = usb_role_switch_get(dev);
+ if (IS_ERR(info->role_sw))
+ return PTR_ERR(info->role_sw);
+ if (info->role_sw) {
+ ret = devm_add_action_or_reset(dev, axp288_put_role_sw, info);
+ if (ret)
+ return ret;
+
+ name = acpi_dev_get_first_match_name("INT3496", NULL, -1);
+ if (name) {
+ info->id_extcon = extcon_get_extcon_dev(name);
+ if (!info->id_extcon)
+ return -EPROBE_DEFER;
+
+ dev_info(dev, "controlling USB role\n");
+ } else {
+ dev_info(dev, "controlling USB role based on Vbus presence\n");
+ }
+ }
+
+ info->vbus_attach = axp288_get_vbus_attach(info);
+
axp288_extcon_log_rsi(info);
/* Initialize extcon device */
@@ -289,6 +412,19 @@ static int axp288_extcon_probe(struct platform_device *pdev)
}
}
+ if (info->id_extcon) {
+ ret = devm_extcon_register_notifier_all(dev, info->id_extcon,
+ &info->id_nb);
+ if (ret)
+ return ret;
+ }
+
+ /* Make sure the role-sw is set correctly before doing BC detection */
+ if (info->role_sw) {
+ queue_work(system_long_wq, &info->role_work);
+ flush_work(&info->role_work);
+ }
+
/* Start charger cable type detection */
axp288_extcon_enable(info);
@@ -308,8 +444,32 @@ static struct platform_driver axp288_extcon_driver = {
.name = "axp288_extcon",
},
};
-module_platform_driver(axp288_extcon_driver);
+
+static struct device_connection axp288_extcon_role_sw_conn = {
+ .endpoint[0] = "axp288_extcon",
+ .endpoint[1] = "intel_xhci_usb_sw-role-switch",
+ .id = "usb-role-switch",
+};
+
+static int __init axp288_extcon_init(void)
+{
+ if (x86_match_cpu(cherry_trail_cpu_ids))
+ device_connection_add(&axp288_extcon_role_sw_conn);
+
+ return platform_driver_register(&axp288_extcon_driver);
+}
+module_init(axp288_extcon_init);
+
+static void __exit axp288_extcon_exit(void)
+{
+ if (x86_match_cpu(cherry_trail_cpu_ids))
+ device_connection_remove(&axp288_extcon_role_sw_conn);
+
+ platform_driver_unregister(&axp288_extcon_driver);
+}
+module_exit(axp288_extcon_exit);
MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
MODULE_LICENSE("GPL v2");