diff options
Diffstat (limited to 'drivers/clk/mxs')
-rw-r--r-- | drivers/clk/mxs/Makefile | 8 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-div.c | 110 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-frac.c | 139 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-imx23.c | 204 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-imx28.c | 337 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-pll.c | 116 | ||||
-rw-r--r-- | drivers/clk/mxs/clk-ref.c | 154 | ||||
-rw-r--r-- | drivers/clk/mxs/clk.c | 28 | ||||
-rw-r--r-- | drivers/clk/mxs/clk.h | 66 |
9 files changed, 1162 insertions, 0 deletions
diff --git a/drivers/clk/mxs/Makefile b/drivers/clk/mxs/Makefile new file mode 100644 index 000000000000..7bedeec08524 --- /dev/null +++ b/drivers/clk/mxs/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for mxs specific clk +# + +obj-y += clk.o clk-pll.o clk-ref.o clk-div.o clk-frac.o + +obj-$(CONFIG_SOC_IMX23) += clk-imx23.o +obj-$(CONFIG_SOC_IMX28) += clk-imx28.o diff --git a/drivers/clk/mxs/clk-div.c b/drivers/clk/mxs/clk-div.c new file mode 100644 index 000000000000..90e1da93877e --- /dev/null +++ b/drivers/clk/mxs/clk-div.c @@ -0,0 +1,110 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/slab.h> +#include "clk.h" + +/** + * struct clk_div - mxs integer divider clock + * @divider: the parent class + * @ops: pointer to clk_ops of parent class + * @reg: register address + * @busy: busy bit shift + * + * The mxs divider clock is a subclass of basic clk_divider with an + * addtional busy bit. + */ +struct clk_div { + struct clk_divider divider; + const struct clk_ops *ops; + void __iomem *reg; + u8 busy; +}; + +static inline struct clk_div *to_clk_div(struct clk_hw *hw) +{ + struct clk_divider *divider = container_of(hw, struct clk_divider, hw); + + return container_of(divider, struct clk_div, divider); +} + +static unsigned long clk_div_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_div *div = to_clk_div(hw); + + return div->ops->recalc_rate(&div->divider.hw, parent_rate); +} + +static long clk_div_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_div *div = to_clk_div(hw); + + return div->ops->round_rate(&div->divider.hw, rate, prate); +} + +static int clk_div_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_div *div = to_clk_div(hw); + int ret; + + ret = div->ops->set_rate(&div->divider.hw, rate, parent_rate); + if (!ret) + ret = mxs_clk_wait(div->reg, div->busy); + + return ret; +} + +static struct clk_ops clk_div_ops = { + .recalc_rate = clk_div_recalc_rate, + .round_rate = clk_div_round_rate, + .set_rate = clk_div_set_rate, +}; + +struct clk *mxs_clk_div(const char *name, const char *parent_name, + void __iomem *reg, u8 shift, u8 width, u8 busy) +{ + struct clk_div *div; + struct clk *clk; + struct clk_init_data init; + + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_div_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = (parent_name ? &parent_name: NULL); + init.num_parents = (parent_name ? 1 : 0); + + div->reg = reg; + div->busy = busy; + + div->divider.reg = reg; + div->divider.shift = shift; + div->divider.width = width; + div->divider.flags = CLK_DIVIDER_ONE_BASED; + div->divider.lock = &mxs_lock; + div->divider.hw.init = &init; + div->ops = &clk_divider_ops; + + clk = clk_register(NULL, &div->divider.hw); + if (IS_ERR(clk)) + kfree(div); + + return clk; +} diff --git a/drivers/clk/mxs/clk-frac.c b/drivers/clk/mxs/clk-frac.c new file mode 100644 index 000000000000..e6aa6b567d68 --- /dev/null +++ b/drivers/clk/mxs/clk-frac.c @@ -0,0 +1,139 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include "clk.h" + +/** + * struct clk_frac - mxs fractional divider clock + * @hw: clk_hw for the fractional divider clock + * @reg: register address + * @shift: the divider bit shift + * @width: the divider bit width + * @busy: busy bit shift + * + * The clock is an adjustable fractional divider with a busy bit to wait + * when the divider is adjusted. + */ +struct clk_frac { + struct clk_hw hw; + void __iomem *reg; + u8 shift; + u8 width; + u8 busy; +}; + +#define to_clk_frac(_hw) container_of(_hw, struct clk_frac, hw) + +static unsigned long clk_frac_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_frac *frac = to_clk_frac(hw); + u32 div; + + div = readl_relaxed(frac->reg) >> frac->shift; + div &= (1 << frac->width) - 1; + + return (parent_rate >> frac->width) * div; +} + +static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_frac *frac = to_clk_frac(hw); + unsigned long parent_rate = *prate; + u32 div; + u64 tmp; + + if (rate > parent_rate) + return -EINVAL; + + tmp = rate; + tmp <<= frac->width; + do_div(tmp, parent_rate); + div = tmp; + + if (!div) + return -EINVAL; + + return (parent_rate >> frac->width) * div; +} + +static int clk_frac_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_frac *frac = to_clk_frac(hw); + unsigned long flags; + u32 div, val; + u64 tmp; + + if (rate > parent_rate) + return -EINVAL; + + tmp = rate; + tmp <<= frac->width; + do_div(tmp, parent_rate); + div = tmp; + + if (!div) + return -EINVAL; + + spin_lock_irqsave(&mxs_lock, flags); + + val = readl_relaxed(frac->reg); + val &= ~(((1 << frac->width) - 1) << frac->shift); + val |= div << frac->shift; + writel_relaxed(val, frac->reg); + + spin_unlock_irqrestore(&mxs_lock, flags); + + return mxs_clk_wait(frac->reg, frac->busy); +} + +static struct clk_ops clk_frac_ops = { + .recalc_rate = clk_frac_recalc_rate, + .round_rate = clk_frac_round_rate, + .set_rate = clk_frac_set_rate, +}; + +struct clk *mxs_clk_frac(const char *name, const char *parent_name, + void __iomem *reg, u8 shift, u8 width, u8 busy) +{ + struct clk_frac *frac; + struct clk *clk; + struct clk_init_data init; + + frac = kzalloc(sizeof(*frac), GFP_KERNEL); + if (!frac) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_frac_ops; + init.flags = CLK_SET_RATE_PARENT; + init.parent_names = (parent_name ? &parent_name: NULL); + init.num_parents = (parent_name ? 1 : 0); + + frac->reg = reg; + frac->shift = shift; + frac->width = width; + frac->busy = busy; + frac->hw.init = &init; + + clk = clk_register(NULL, &frac->hw); + if (IS_ERR(clk)) + kfree(frac); + + return clk; +} diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c new file mode 100644 index 000000000000..dcae11285716 --- /dev/null +++ b/drivers/clk/mxs/clk-imx23.c @@ -0,0 +1,204 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <mach/common.h> +#include <mach/mx23.h> +#include "clk.h" + +#define DIGCTRL MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR) +#define CLKCTRL MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR) +#define PLLCTRL0 (CLKCTRL + 0x0000) +#define CPU (CLKCTRL + 0x0020) +#define HBUS (CLKCTRL + 0x0030) +#define XBUS (CLKCTRL + 0x0040) +#define XTAL (CLKCTRL + 0x0050) +#define PIX (CLKCTRL + 0x0060) +#define SSP (CLKCTRL + 0x0070) +#define GPMI (CLKCTRL + 0x0080) +#define SPDIF (CLKCTRL + 0x0090) +#define EMI (CLKCTRL + 0x00a0) +#define SAIF (CLKCTRL + 0x00c0) +#define TV (CLKCTRL + 0x00d0) +#define ETM (CLKCTRL + 0x00e0) +#define FRAC (CLKCTRL + 0x00f0) +#define CLKSEQ (CLKCTRL + 0x0110) + +#define BP_CPU_INTERRUPT_WAIT 12 +#define BP_CLKSEQ_BYPASS_SAIF 0 +#define BP_CLKSEQ_BYPASS_SSP 5 +#define BP_SAIF_DIV_FRAC_EN 16 +#define BP_FRAC_IOFRAC 24 + +static void __init clk_misc_init(void) +{ + u32 val; + + /* Gate off cpu clock in WFI for power saving */ + __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU); + + /* Clear BYPASS for SAIF */ + __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ); + + /* SAIF has to use frac div for functional operation */ + val = readl_relaxed(SAIF); + val |= 1 << BP_SAIF_DIV_FRAC_EN; + writel_relaxed(val, SAIF); + + /* + * Source ssp clock from ref_io than ref_xtal, + * as ref_xtal only provides 24 MHz as maximum. + */ + __mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ); + + /* + * 480 MHz seems too high to be ssp clock source directly, + * so set frac to get a 288 MHz ref_io. + */ + __mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC); + __mxs_setl(30 << BP_FRAC_IOFRAC, FRAC); +} + +static struct clk_lookup uart_lookups[] __initdata = { + { .dev_id = "duart", }, + { .dev_id = "mxs-auart.0", }, + { .dev_id = "mxs-auart.1", }, + { .dev_id = "8006c000.serial", }, + { .dev_id = "8006e000.serial", }, + { .dev_id = "80070000.serial", }, +}; + +static struct clk_lookup hbus_lookups[] __initdata = { + { .dev_id = "mxs-dma-apbh", }, + { .dev_id = "80004000.dma-apbh", }, +}; + +static struct clk_lookup xbus_lookups[] __initdata = { + { .dev_id = "duart", .con_id = "apb_pclk"}, + { .dev_id = "mxs-dma-apbx", }, + { .dev_id = "80024000.dma-apbx", }, +}; + +static struct clk_lookup ssp_lookups[] __initdata = { + { .dev_id = "mxs-mmc.0", }, + { .dev_id = "mxs-mmc.1", }, + { .dev_id = "80010000.ssp", }, + { .dev_id = "80034000.ssp", }, +}; + +static struct clk_lookup lcdif_lookups[] __initdata = { + { .dev_id = "imx23-fb", }, + { .dev_id = "80030000.lcdif", }, +}; + +static struct clk_lookup gpmi_lookups[] __initdata = { + { .dev_id = "imx23-gpmi-nand", }, + { .dev_id = "8000c000.gpmi", }, +}; + +static const char *sel_pll[] __initconst = { "pll", "ref_xtal", }; +static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", }; +static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", }; +static const char *sel_io[] __initconst = { "ref_io", "ref_xtal", }; +static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", }; +static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", }; + +enum imx23_clk { + ref_xtal, pll, ref_cpu, ref_emi, ref_pix, ref_io, saif_sel, + lcdif_sel, gpmi_sel, ssp_sel, emi_sel, cpu, etm_sel, cpu_pll, + cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll, + emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div, + clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif, + lcdif, etm, usb, usb_pwr, + clk_max +}; + +static struct clk *clks[clk_max]; + +static enum imx23_clk clks_init_on[] __initdata = { + cpu, hbus, xbus, emi, uart, +}; + +int __init mx23_clocks_init(void) +{ + int i; + + clk_misc_init(); + + clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000); + clks[pll] = mxs_clk_pll("pll", "ref_xtal", PLLCTRL0, 16, 480000000); + clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll", FRAC, 0); + clks[ref_emi] = mxs_clk_ref("ref_emi", "pll", FRAC, 1); + clks[ref_pix] = mxs_clk_ref("ref_pix", "pll", FRAC, 2); + clks[ref_io] = mxs_clk_ref("ref_io", "pll", FRAC, 3); + clks[saif_sel] = mxs_clk_mux("saif_sel", CLKSEQ, 0, 1, sel_pll, ARRAY_SIZE(sel_pll)); + clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 1, 1, sel_pix, ARRAY_SIZE(sel_pix)); + clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 4, 1, sel_io, ARRAY_SIZE(sel_io)); + clks[ssp_sel] = mxs_clk_mux("ssp_sel", CLKSEQ, 5, 1, sel_io, ARRAY_SIZE(sel_io)); + clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 6, 1, emi_sels, ARRAY_SIZE(emi_sels)); + clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 7, 1, cpu_sels, ARRAY_SIZE(cpu_sels)); + clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu)); + clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28); + clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29); + clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 29); + clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31); + clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", PIX, 0, 12, 29); + clks[ssp_div] = mxs_clk_div("ssp_div", "ssp_sel", SSP, 0, 9, 29); + clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29); + clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28); + clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29); + clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 6, 29); + clks[saif_div] = mxs_clk_frac("saif_div", "saif_sel", SAIF, 0, 16, 29); + clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750); + clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768); + clks[adc] = mxs_clk_fixed_factor("adc", "clk32k", 1, 16); + clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll", 1, 4); + clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26); + clks[dri] = mxs_clk_gate("dri", "ref_xtal", XTAL, 28); + clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29); + clks[filt] = mxs_clk_gate("filt", "ref_xtal", XTAL, 30); + clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31); + clks[ssp] = mxs_clk_gate("ssp", "ssp_div", SSP, 31); + clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31); + clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31); + clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31); + clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31); + clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31); + clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31); + clks[usb] = mxs_clk_gate("usb", "usb_pwr", DIGCTRL, 2); + clks[usb_pwr] = clk_register_gate(NULL, "usb_pwr", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) { + pr_err("i.MX23 clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + return PTR_ERR(clks[i]); + } + + clk_register_clkdev(clks[clk32k], NULL, "timrot"); + clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); + clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); + clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); + clk_register_clkdevs(clks[ssp], ssp_lookups, ARRAY_SIZE(ssp_lookups)); + clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups)); + clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups)); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + mxs_timer_init(MX23_INT_TIMER0); + + return 0; +} diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c new file mode 100644 index 000000000000..b2a3257d4f66 --- /dev/null +++ b/drivers/clk/mxs/clk-imx28.c @@ -0,0 +1,337 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <mach/common.h> +#include <mach/mx28.h> +#include "clk.h" + +#define CLKCTRL MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR) +#define PLL0CTRL0 (CLKCTRL + 0x0000) +#define PLL1CTRL0 (CLKCTRL + 0x0020) +#define PLL2CTRL0 (CLKCTRL + 0x0040) +#define CPU (CLKCTRL + 0x0050) +#define HBUS (CLKCTRL + 0x0060) +#define XBUS (CLKCTRL + 0x0070) +#define XTAL (CLKCTRL + 0x0080) +#define SSP0 (CLKCTRL + 0x0090) +#define SSP1 (CLKCTRL + 0x00a0) +#define SSP2 (CLKCTRL + 0x00b0) +#define SSP3 (CLKCTRL + 0x00c0) +#define GPMI (CLKCTRL + 0x00d0) +#define SPDIF (CLKCTRL + 0x00e0) +#define EMI (CLKCTRL + 0x00f0) +#define SAIF0 (CLKCTRL + 0x0100) +#define SAIF1 (CLKCTRL + 0x0110) +#define LCDIF (CLKCTRL + 0x0120) +#define ETM (CLKCTRL + 0x0130) +#define ENET (CLKCTRL + 0x0140) +#define FLEXCAN (CLKCTRL + 0x0160) +#define FRAC0 (CLKCTRL + 0x01b0) +#define FRAC1 (CLKCTRL + 0x01c0) +#define CLKSEQ (CLKCTRL + 0x01d0) + +#define BP_CPU_INTERRUPT_WAIT 12 +#define BP_SAIF_DIV_FRAC_EN 16 +#define BP_ENET_DIV_TIME 21 +#define BP_ENET_SLEEP 31 +#define BP_CLKSEQ_BYPASS_SAIF0 0 +#define BP_CLKSEQ_BYPASS_SSP0 3 +#define BP_FRAC0_IO1FRAC 16 +#define BP_FRAC0_IO0FRAC 24 + +#define DIGCTRL MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR) +#define BP_SAIF_CLKMUX 10 + +/* + * HW_SAIF_CLKMUX_SEL: + * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1 + * clock pins selected for SAIF1 input clocks. + * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and + * SAIF0 clock inputs selected for SAIF1 input clocks. + * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input + * clocks. + * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input + * clocks. + */ +int mxs_saif_clkmux_select(unsigned int clkmux) +{ + if (clkmux > 0x3) + return -EINVAL; + + __mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL); + __mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL); + + return 0; +} + +static void __init clk_misc_init(void) +{ + u32 val; + + /* Gate off cpu clock in WFI for power saving */ + __mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU); + + /* 0 is a bad default value for a divider */ + __mxs_setl(1 << BP_ENET_DIV_TIME, ENET); + + /* Clear BYPASS for SAIF */ + __mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ); + + /* SAIF has to use frac div for functional operation */ + val = readl_relaxed(SAIF0); + val |= 1 << BP_SAIF_DIV_FRAC_EN; + writel_relaxed(val, SAIF0); + + val = readl_relaxed(SAIF1); + val |= 1 << BP_SAIF_DIV_FRAC_EN; + writel_relaxed(val, SAIF1); + + /* Extra fec clock setting */ + val = readl_relaxed(ENET); + val &= ~(1 << BP_ENET_SLEEP); + writel_relaxed(val, ENET); + + /* + * Source ssp clock from ref_io than ref_xtal, + * as ref_xtal only provides 24 MHz as maximum. + */ + __mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ); + + /* + * 480 MHz seems too high to be ssp clock source directly, + * so set frac0 to get a 288 MHz ref_io0. + */ + val = readl_relaxed(FRAC0); + val &= ~(0x3f << BP_FRAC0_IO0FRAC); + val |= 30 << BP_FRAC0_IO0FRAC; + writel_relaxed(val, FRAC0); +} + +static struct clk_lookup uart_lookups[] __initdata = { + { .dev_id = "duart", }, + { .dev_id = "mxs-auart.0", }, + { .dev_id = "mxs-auart.1", }, + { .dev_id = "mxs-auart.2", }, + { .dev_id = "mxs-auart.3", }, + { .dev_id = "mxs-auart.4", }, + { .dev_id = "8006a000.serial", }, + { .dev_id = "8006c000.serial", }, + { .dev_id = "8006e000.serial", }, + { .dev_id = "80070000.serial", }, + { .dev_id = "80072000.serial", }, + { .dev_id = "80074000.serial", }, +}; + +static struct clk_lookup hbus_lookups[] __initdata = { + { .dev_id = "mxs-dma-apbh", }, + { .dev_id = "80004000.dma-apbh", }, +}; + +static struct clk_lookup xbus_lookups[] __initdata = { + { .dev_id = "duart", .con_id = "apb_pclk"}, + { .dev_id = "mxs-dma-apbx", }, + { .dev_id = "80024000.dma-apbx", }, +}; + +static struct clk_lookup ssp0_lookups[] __initdata = { + { .dev_id = "mxs-mmc.0", }, + { .dev_id = "80010000.ssp", }, +}; + +static struct clk_lookup ssp1_lookups[] __initdata = { + { .dev_id = "mxs-mmc.1", }, + { .dev_id = "80012000.ssp", }, +}; + +static struct clk_lookup ssp2_lookups[] __initdata = { + { .dev_id = "mxs-mmc.2", }, + { .dev_id = "80014000.ssp", }, +}; + +static struct clk_lookup ssp3_lookups[] __initdata = { + { .dev_id = "mxs-mmc.3", }, + { .dev_id = "80016000.ssp", }, +}; + +static struct clk_lookup lcdif_lookups[] __initdata = { + { .dev_id = "imx28-fb", }, + { .dev_id = "80030000.lcdif", }, +}; + +static struct clk_lookup gpmi_lookups[] __initdata = { + { .dev_id = "imx28-gpmi-nand", }, + { .dev_id = "8000c000.gpmi", }, +}; + +static struct clk_lookup fec_lookups[] __initdata = { + { .dev_id = "imx28-fec.0", }, + { .dev_id = "imx28-fec.1", }, + { .dev_id = "800f0000.ethernet", }, + { .dev_id = "800f4000.ethernet", }, +}; + +static struct clk_lookup can0_lookups[] __initdata = { + { .dev_id = "flexcan.0", }, + { .dev_id = "80032000.can", }, +}; + +static struct clk_lookup can1_lookups[] __initdata = { + { .dev_id = "flexcan.1", }, + { .dev_id = "80034000.can", }, +}; + +static struct clk_lookup saif0_lookups[] __initdata = { + { .dev_id = "mxs-saif.0", }, + { .dev_id = "80042000.saif", }, +}; + +static struct clk_lookup saif1_lookups[] __initdata = { + { .dev_id = "mxs-saif.1", }, + { .dev_id = "80046000.saif", }, +}; + +static const char *sel_cpu[] __initconst = { "ref_cpu", "ref_xtal", }; +static const char *sel_io0[] __initconst = { "ref_io0", "ref_xtal", }; +static const char *sel_io1[] __initconst = { "ref_io1", "ref_xtal", }; +static const char *sel_pix[] __initconst = { "ref_pix", "ref_xtal", }; +static const char *sel_gpmi[] __initconst = { "ref_gpmi", "ref_xtal", }; +static const char *sel_pll0[] __initconst = { "pll0", "ref_xtal", }; +static const char *cpu_sels[] __initconst = { "cpu_pll", "cpu_xtal", }; +static const char *emi_sels[] __initconst = { "emi_pll", "emi_xtal", }; +static const char *ptp_sels[] __initconst = { "ref_xtal", "pll0", }; + +enum imx28_clk { + ref_xtal, pll0, pll1, pll2, ref_cpu, ref_emi, ref_io0, ref_io1, + ref_pix, ref_hsadc, ref_gpmi, saif0_sel, saif1_sel, gpmi_sel, + ssp0_sel, ssp1_sel, ssp2_sel, ssp3_sel, emi_sel, etm_sel, + lcdif_sel, cpu, ptp_sel, cpu_pll, cpu_xtal, hbus, xbus, + ssp0_div, ssp1_div, ssp2_div, ssp3_div, gpmi_div, emi_pll, + emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div, + clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0, + ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm, + fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out, + clk_max +}; + +static struct clk *clks[clk_max]; + +static enum imx28_clk clks_init_on[] __initdata = { + cpu, hbus, xbus, emi, uart, +}; + +int __init mx28_clocks_init(void) +{ + int i; + + clk_misc_init(); + + clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000); + clks[pll0] = mxs_clk_pll("pll0", "ref_xtal", PLL0CTRL0, 17, 480000000); + clks[pll1] = mxs_clk_pll("pll1", "ref_xtal", PLL1CTRL0, 17, 480000000); + clks[pll2] = mxs_clk_pll("pll2", "ref_xtal", PLL2CTRL0, 23, 50000000); + clks[ref_cpu] = mxs_clk_ref("ref_cpu", "pll0", FRAC0, 0); + clks[ref_emi] = mxs_clk_ref("ref_emi", "pll0", FRAC0, 1); + clks[ref_io0] = mxs_clk_ref("ref_io0", "pll0", FRAC0, 2); + clks[ref_io1] = mxs_clk_ref("ref_io1", "pll0", FRAC0, 3); + clks[ref_pix] = mxs_clk_ref("ref_pix", "pll0", FRAC1, 0); + clks[ref_hsadc] = mxs_clk_ref("ref_hsadc", "pll0", FRAC1, 1); + clks[ref_gpmi] = mxs_clk_ref("ref_gpmi", "pll0", FRAC1, 2); + clks[saif0_sel] = mxs_clk_mux("saif0_sel", CLKSEQ, 0, 1, sel_pll0, ARRAY_SIZE(sel_pll0)); + clks[saif1_sel] = mxs_clk_mux("saif1_sel", CLKSEQ, 1, 1, sel_pll0, ARRAY_SIZE(sel_pll0)); + clks[gpmi_sel] = mxs_clk_mux("gpmi_sel", CLKSEQ, 2, 1, sel_gpmi, ARRAY_SIZE(sel_gpmi)); + clks[ssp0_sel] = mxs_clk_mux("ssp0_sel", CLKSEQ, 3, 1, sel_io0, ARRAY_SIZE(sel_io0)); + clks[ssp1_sel] = mxs_clk_mux("ssp1_sel", CLKSEQ, 4, 1, sel_io0, ARRAY_SIZE(sel_io0)); + clks[ssp2_sel] = mxs_clk_mux("ssp2_sel", CLKSEQ, 5, 1, sel_io1, ARRAY_SIZE(sel_io1)); + clks[ssp3_sel] = mxs_clk_mux("ssp3_sel", CLKSEQ, 6, 1, sel_io1, ARRAY_SIZE(sel_io1)); + clks[emi_sel] = mxs_clk_mux("emi_sel", CLKSEQ, 7, 1, emi_sels, ARRAY_SIZE(emi_sels)); + clks[etm_sel] = mxs_clk_mux("etm_sel", CLKSEQ, 8, 1, sel_cpu, ARRAY_SIZE(sel_cpu)); + clks[lcdif_sel] = mxs_clk_mux("lcdif_sel", CLKSEQ, 14, 1, sel_pix, ARRAY_SIZE(sel_pix)); + clks[cpu] = mxs_clk_mux("cpu", CLKSEQ, 18, 1, cpu_sels, ARRAY_SIZE(cpu_sels)); + clks[ptp_sel] = mxs_clk_mux("ptp_sel", ENET, 19, 1, ptp_sels, ARRAY_SIZE(ptp_sels)); + clks[cpu_pll] = mxs_clk_div("cpu_pll", "ref_cpu", CPU, 0, 6, 28); + clks[cpu_xtal] = mxs_clk_div("cpu_xtal", "ref_xtal", CPU, 16, 10, 29); + clks[hbus] = mxs_clk_div("hbus", "cpu", HBUS, 0, 5, 31); + clks[xbus] = mxs_clk_div("xbus", "ref_xtal", XBUS, 0, 10, 31); + clks[ssp0_div] = mxs_clk_div("ssp0_div", "ssp0_sel", SSP0, 0, 9, 29); + clks[ssp1_div] = mxs_clk_div("ssp1_div", "ssp1_sel", SSP1, 0, 9, 29); + clks[ssp2_div] = mxs_clk_div("ssp2_div", "ssp2_sel", SSP2, 0, 9, 29); + clks[ssp3_div] = mxs_clk_div("ssp3_div", "ssp3_sel", SSP3, 0, 9, 29); + clks[gpmi_div] = mxs_clk_div("gpmi_div", "gpmi_sel", GPMI, 0, 10, 29); + clks[emi_pll] = mxs_clk_div("emi_pll", "ref_emi", EMI, 0, 6, 28); + clks[emi_xtal] = mxs_clk_div("emi_xtal", "ref_xtal", EMI, 8, 4, 29); + clks[lcdif_div] = mxs_clk_div("lcdif_div", "lcdif_sel", LCDIF, 0, 13, 29); + clks[etm_div] = mxs_clk_div("etm_div", "etm_sel", ETM, 0, 7, 29); + clks[ptp] = mxs_clk_div("ptp", "ptp_sel", ENET, 21, 6, 27); + clks[saif0_div] = mxs_clk_frac("saif0_div", "saif0_sel", SAIF0, 0, 16, 29); + clks[saif1_div] = mxs_clk_frac("saif1_div", "saif1_sel", SAIF1, 0, 16, 29); + clks[clk32k_div] = mxs_clk_fixed_factor("clk32k_div", "ref_xtal", 1, 750); + clks[rtc] = mxs_clk_fixed_factor("rtc", "ref_xtal", 1, 768); + clks[lradc] = mxs_clk_fixed_factor("lradc", "clk32k", 1, 16); + clks[spdif_div] = mxs_clk_fixed_factor("spdif_div", "pll0", 1, 4); + clks[clk32k] = mxs_clk_gate("clk32k", "clk32k_div", XTAL, 26); + clks[pwm] = mxs_clk_gate("pwm", "ref_xtal", XTAL, 29); + clks[uart] = mxs_clk_gate("uart", "ref_xtal", XTAL, 31); + clks[ssp0] = mxs_clk_gate("ssp0", "ssp0_div", SSP0, 31); + clks[ssp1] = mxs_clk_gate("ssp1", "ssp1_div", SSP1, 31); + clks[ssp2] = mxs_clk_gate("ssp2", "ssp2_div", SSP2, 31); + clks[ssp3] = mxs_clk_gate("ssp3", "ssp3_div", SSP3, 31); + clks[gpmi] = mxs_clk_gate("gpmi", "gpmi_div", GPMI, 31); + clks[spdif] = mxs_clk_gate("spdif", "spdif_div", SPDIF, 31); + clks[emi] = mxs_clk_gate("emi", "emi_sel", EMI, 31); + clks[saif0] = mxs_clk_gate("saif0", "saif0_div", SAIF0, 31); + clks[saif1] = mxs_clk_gate("saif1", "saif1_div", SAIF1, 31); + clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", LCDIF, 31); + clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31); + clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30); + clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30); + clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28); + clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2); + clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16); + clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock); + clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock); + clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) { + pr_err("i.MX28 clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + return PTR_ERR(clks[i]); + } + + clk_register_clkdev(clks[clk32k], NULL, "timrot"); + clk_register_clkdev(clks[enet_out], NULL, "enet_out"); + clk_register_clkdevs(clks[hbus], hbus_lookups, ARRAY_SIZE(hbus_lookups)); + clk_register_clkdevs(clks[xbus], xbus_lookups, ARRAY_SIZE(xbus_lookups)); + clk_register_clkdevs(clks[uart], uart_lookups, ARRAY_SIZE(uart_lookups)); + clk_register_clkdevs(clks[ssp0], ssp0_lookups, ARRAY_SIZE(ssp0_lookups)); + clk_register_clkdevs(clks[ssp1], ssp1_lookups, ARRAY_SIZE(ssp1_lookups)); + clk_register_clkdevs(clks[ssp2], ssp2_lookups, ARRAY_SIZE(ssp2_lookups)); + clk_register_clkdevs(clks[ssp3], ssp3_lookups, ARRAY_SIZE(ssp3_lookups)); + clk_register_clkdevs(clks[gpmi], gpmi_lookups, ARRAY_SIZE(gpmi_lookups)); + clk_register_clkdevs(clks[saif0], saif0_lookups, ARRAY_SIZE(saif0_lookups)); + clk_register_clkdevs(clks[saif1], saif1_lookups, ARRAY_SIZE(saif1_lookups)); + clk_register_clkdevs(clks[lcdif], lcdif_lookups, ARRAY_SIZE(lcdif_lookups)); + clk_register_clkdevs(clks[fec], fec_lookups, ARRAY_SIZE(fec_lookups)); + clk_register_clkdevs(clks[can0], can0_lookups, ARRAY_SIZE(can0_lookups)); + clk_register_clkdevs(clks[can1], can1_lookups, ARRAY_SIZE(can1_lookups)); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + mxs_timer_init(MX28_INT_TIMER0); + + return 0; +} diff --git a/drivers/clk/mxs/clk-pll.c b/drivers/clk/mxs/clk-pll.c new file mode 100644 index 000000000000..fadae41833ec --- /dev/null +++ b/drivers/clk/mxs/clk-pll.c @@ -0,0 +1,116 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include "clk.h" + +/** + * struct clk_pll - mxs pll clock + * @hw: clk_hw for the pll + * @base: base address of the pll + * @power: the shift of power bit + * @rate: the clock rate of the pll + * + * The mxs pll is a fixed rate clock with power and gate control, + * and the shift of gate bit is always 31. + */ +struct clk_pll { + struct clk_hw hw; + void __iomem *base; + u8 power; + unsigned long rate; +}; + +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +static int clk_pll_prepare(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + + writel_relaxed(1 << pll->power, pll->base + SET); + + udelay(10); + + return 0; +} + +static void clk_pll_unprepare(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + + writel_relaxed(1 << pll->power, pll->base + CLR); +} + +static int clk_pll_enable(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + + writel_relaxed(1 << 31, pll->base + CLR); + + return 0; +} + +static void clk_pll_disable(struct clk_hw *hw) +{ + struct clk_pll *pll = to_clk_pll(hw); + + writel_relaxed(1 << 31, pll->base + SET); +} + +static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + + return pll->rate; +} + +static const struct clk_ops clk_pll_ops = { + .prepare = clk_pll_prepare, + .unprepare = clk_pll_unprepare, + .enable = clk_pll_enable, + .disable = clk_pll_disable, + .recalc_rate = clk_pll_recalc_rate, +}; + +struct clk *mxs_clk_pll(const char *name, const char *parent_name, + void __iomem *base, u8 power, unsigned long rate) +{ + struct clk_pll *pll; + struct clk *clk; + struct clk_init_data init; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_pll_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name: NULL); + init.num_parents = (parent_name ? 1 : 0); + + pll->base = base; + pll->rate = rate; + pll->power = power; + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) + kfree(pll); + + return clk; +} diff --git a/drivers/clk/mxs/clk-ref.c b/drivers/clk/mxs/clk-ref.c new file mode 100644 index 000000000000..4adeed6c2f94 --- /dev/null +++ b/drivers/clk/mxs/clk-ref.c @@ -0,0 +1,154 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include "clk.h" + +/** + * struct clk_ref - mxs reference clock + * @hw: clk_hw for the reference clock + * @reg: register address + * @idx: the index of the reference clock within the same register + * + * The mxs reference clock sources from pll. Every 4 reference clocks share + * one register space, and @idx is used to identify them. Each reference + * clock has a gate control and a fractional * divider. The rate is calculated + * as pll rate * (18 / FRAC), where FRAC = 18 ~ 35. + */ +struct clk_ref { + struct clk_hw hw; + void __iomem *reg; + u8 idx; +}; + +#define to_clk_ref(_hw) container_of(_hw, struct clk_ref, hw) + +static int clk_ref_enable(struct clk_hw *hw) +{ + struct clk_ref *ref = to_clk_ref(hw); + + writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + CLR); + + return 0; +} + +static void clk_ref_disable(struct clk_hw *hw) +{ + struct clk_ref *ref = to_clk_ref(hw); + + writel_relaxed(1 << ((ref->idx + 1) * 8 - 1), ref->reg + SET); +} + +static unsigned long clk_ref_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_ref *ref = to_clk_ref(hw); + u64 tmp = parent_rate; + u8 frac = (readl_relaxed(ref->reg) >> (ref->idx * 8)) & 0x3f; + + tmp *= 18; + do_div(tmp, frac); + + return tmp; +} + +static long clk_ref_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long parent_rate = *prate; + u64 tmp = parent_rate; + u8 frac; + + tmp = tmp * 18 + rate / 2; + do_div(tmp, rate); + frac = tmp; + + if (frac < 18) + frac = 18; + else if (frac > 35) + frac = 35; + + tmp = parent_ |