diff options
Diffstat (limited to 'drivers/char/drm/r300_reg.h')
| -rw-r--r-- | drivers/char/drm/r300_reg.h | 1772 |
1 files changed, 0 insertions, 1772 deletions
diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h deleted file mode 100644 index a6802f26afc4..000000000000 --- a/drivers/char/drm/r300_reg.h +++ /dev/null @@ -1,1772 +0,0 @@ -/************************************************************************** - -Copyright (C) 2004-2005 Nicolai Haehnle et al. - -Permission is hereby granted, free of charge, to any person obtaining a -copy of this software and associated documentation files (the "Software"), -to deal in the Software without restriction, including without limitation -on the rights to use, copy, modify, merge, publish, distribute, sub -license, and/or sell copies of the Software, and to permit persons to whom -the Software is furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice (including the next -paragraph) shall be included in all copies or substantial portions of the -Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL -THE AUTHOR(S) AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, -DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR -OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE -USE OR OTHER DEALINGS IN THE SOFTWARE. - -**************************************************************************/ - -#ifndef _R300_REG_H -#define _R300_REG_H - -#define R300_MC_INIT_MISC_LAT_TIMER 0x180 -# define R300_MC_MISC__MC_CPR_INIT_LAT_SHIFT 0 -# define R300_MC_MISC__MC_VF_INIT_LAT_SHIFT 4 -# define R300_MC_MISC__MC_DISP0R_INIT_LAT_SHIFT 8 -# define R300_MC_MISC__MC_DISP1R_INIT_LAT_SHIFT 12 -# define R300_MC_MISC__MC_FIXED_INIT_LAT_SHIFT 16 -# define R300_MC_MISC__MC_E2R_INIT_LAT_SHIFT 20 -# define R300_MC_MISC__MC_SAME_PAGE_PRIO_SHIFT 24 -# define R300_MC_MISC__MC_GLOBW_INIT_LAT_SHIFT 28 - -#define R300_MC_INIT_GFX_LAT_TIMER 0x154 -# define R300_MC_MISC__MC_G3D0R_INIT_LAT_SHIFT 0 -# define R300_MC_MISC__MC_G3D1R_INIT_LAT_SHIFT 4 -# define R300_MC_MISC__MC_G3D2R_INIT_LAT_SHIFT 8 -# define R300_MC_MISC__MC_G3D3R_INIT_LAT_SHIFT 12 -# define R300_MC_MISC__MC_TX0R_INIT_LAT_SHIFT 16 -# define R300_MC_MISC__MC_TX1R_INIT_LAT_SHIFT 20 -# define R300_MC_MISC__MC_GLOBR_INIT_LAT_SHIFT 24 -# define R300_MC_MISC__MC_GLOBW_FULL_LAT_SHIFT 28 - -/* - * This file contains registers and constants for the R300. They have been - * found mostly by examining command buffers captured using glxtest, as well - * as by extrapolating some known registers and constants from the R200. - * I am fairly certain that they are correct unless stated otherwise - * in comments. - */ - -#define R300_SE_VPORT_XSCALE 0x1D98 -#define R300_SE_VPORT_XOFFSET 0x1D9C -#define R300_SE_VPORT_YSCALE 0x1DA0 -#define R300_SE_VPORT_YOFFSET 0x1DA4 -#define R300_SE_VPORT_ZSCALE 0x1DA8 -#define R300_SE_VPORT_ZOFFSET 0x1DAC - - -/* - * Vertex Array Processing (VAP) Control - * Stolen from r200 code from Christoph Brill (It's a guess!) - */ -#define R300_VAP_CNTL 0x2080 - -/* This register is written directly and also starts data section - * in many 3d CP_PACKET3's - */ -#define R300_VAP_VF_CNTL 0x2084 -# define R300_VAP_VF_CNTL__PRIM_TYPE__SHIFT 0 -# define R300_VAP_VF_CNTL__PRIM_NONE (0<<0) -# define R300_VAP_VF_CNTL__PRIM_POINTS (1<<0) -# define R300_VAP_VF_CNTL__PRIM_LINES (2<<0) -# define R300_VAP_VF_CNTL__PRIM_LINE_STRIP (3<<0) -# define R300_VAP_VF_CNTL__PRIM_TRIANGLES (4<<0) -# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_FAN (5<<0) -# define R300_VAP_VF_CNTL__PRIM_TRIANGLE_STRIP (6<<0) -# define R300_VAP_VF_CNTL__PRIM_LINE_LOOP (12<<0) -# define R300_VAP_VF_CNTL__PRIM_QUADS (13<<0) -# define R300_VAP_VF_CNTL__PRIM_QUAD_STRIP (14<<0) -# define R300_VAP_VF_CNTL__PRIM_POLYGON (15<<0) - -# define R300_VAP_VF_CNTL__PRIM_WALK__SHIFT 4 - /* State based - direct writes to registers trigger vertex - generation */ -# define R300_VAP_VF_CNTL__PRIM_WALK_STATE_BASED (0<<4) -# define R300_VAP_VF_CNTL__PRIM_WALK_INDICES (1<<4) -# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_LIST (2<<4) -# define R300_VAP_VF_CNTL__PRIM_WALK_VERTEX_EMBEDDED (3<<4) - - /* I don't think I saw these three used.. */ -# define R300_VAP_VF_CNTL__COLOR_ORDER__SHIFT 6 -# define R300_VAP_VF_CNTL__TCL_OUTPUT_CTL_ENA__SHIFT 9 -# define R300_VAP_VF_CNTL__PROG_STREAM_ENA__SHIFT 10 - - /* index size - when not set the indices are assumed to be 16 bit */ -# define R300_VAP_VF_CNTL__INDEX_SIZE_32bit (1<<11) - /* number of vertices */ -# define R300_VAP_VF_CNTL__NUM_VERTICES__SHIFT 16 - -/* BEGIN: Wild guesses */ -#define R300_VAP_OUTPUT_VTX_FMT_0 0x2090 -# define R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT (1<<0) -# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_PRESENT (1<<1) -# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_1_PRESENT (1<<2) /* GUESS */ -# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_2_PRESENT (1<<3) /* GUESS */ -# define R300_VAP_OUTPUT_VTX_FMT_0__COLOR_3_PRESENT (1<<4) /* GUESS */ -# define R300_VAP_OUTPUT_VTX_FMT_0__PT_SIZE_PRESENT (1<<16) /* GUESS */ - -#define R300_VAP_OUTPUT_VTX_FMT_1 0x2094 - /* each of the following is 3 bits wide, specifies number - of components */ -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 -# define R300_VAP_OUTPUT_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 -/* END: Wild guesses */ - -#define R300_SE_VTE_CNTL 0x20b0 -# define R300_VPORT_X_SCALE_ENA 0x00000001 -# define R300_VPORT_X_OFFSET_ENA 0x00000002 -# define R300_VPORT_Y_SCALE_ENA 0x00000004 -# define R300_VPORT_Y_OFFSET_ENA 0x00000008 -# define R300_VPORT_Z_SCALE_ENA 0x00000010 -# define R300_VPORT_Z_OFFSET_ENA 0x00000020 -# define R300_VTX_XY_FMT 0x00000100 -# define R300_VTX_Z_FMT 0x00000200 -# define R300_VTX_W0_FMT 0x00000400 -# define R300_VTX_W0_NORMALIZE 0x00000800 -# define R300_VTX_ST_DENORMALIZED 0x00001000 - -/* BEGIN: Vertex data assembly - lots of uncertainties */ - -/* gap */ - -#define R300_VAP_CNTL_STATUS 0x2140 -# define R300_VC_NO_SWAP (0 << 0) -# define R300_VC_16BIT_SWAP (1 << 0) -# define R300_VC_32BIT_SWAP (2 << 0) -# define R300_VAP_TCL_BYPASS (1 << 8) - -/* gap */ - -/* Where do we get our vertex data? - * - * Vertex data either comes either from immediate mode registers or from - * vertex arrays. - * There appears to be no mixed mode (though we can force the pitch of - * vertex arrays to 0, effectively reusing the same element over and over - * again). - * - * Immediate mode is controlled by the INPUT_CNTL registers. I am not sure - * if these registers influence vertex array processing. - * - * Vertex arrays are controlled via the 3D_LOAD_VBPNTR packet3. - * - * In both cases, vertex attributes are then passed through INPUT_ROUTE. - * - * Beginning with INPUT_ROUTE_0_0 is a list of WORDs that route vertex data - * into the vertex processor's input registers. - * The first word routes the first input, the second word the second, etc. - * The corresponding input is routed into the register with the given index. - * The list is ended by a word with INPUT_ROUTE_END set. - * - * Always set COMPONENTS_4 in immediate mode. - */ - -#define R300_VAP_INPUT_ROUTE_0_0 0x2150 -# define R300_INPUT_ROUTE_COMPONENTS_1 (0 << 0) -# define R300_INPUT_ROUTE_COMPONENTS_2 (1 << 0) -# define R300_INPUT_ROUTE_COMPONENTS_3 (2 << 0) -# define R300_INPUT_ROUTE_COMPONENTS_4 (3 << 0) -# define R300_INPUT_ROUTE_COMPONENTS_RGBA (4 << 0) /* GUESS */ -# define R300_VAP_INPUT_ROUTE_IDX_SHIFT 8 -# define R300_VAP_INPUT_ROUTE_IDX_MASK (31 << 8) /* GUESS */ -# define R300_VAP_INPUT_ROUTE_END (1 << 13) -# define R300_INPUT_ROUTE_IMMEDIATE_MODE (0 << 14) /* GUESS */ -# define R300_INPUT_ROUTE_FLOAT (1 << 14) /* GUESS */ -# define R300_INPUT_ROUTE_UNSIGNED_BYTE (2 << 14) /* GUESS */ -# define R300_INPUT_ROUTE_FLOAT_COLOR (3 << 14) /* GUESS */ -#define R300_VAP_INPUT_ROUTE_0_1 0x2154 -#define R300_VAP_INPUT_ROUTE_0_2 0x2158 -#define R300_VAP_INPUT_ROUTE_0_3 0x215C -#define R300_VAP_INPUT_ROUTE_0_4 0x2160 -#define R300_VAP_INPUT_ROUTE_0_5 0x2164 -#define R300_VAP_INPUT_ROUTE_0_6 0x2168 -#define R300_VAP_INPUT_ROUTE_0_7 0x216C - -/* gap */ - -/* Notes: - * - always set up to produce at least two attributes: - * if vertex program uses only position, fglrx will set normal, too - * - INPUT_CNTL_0_COLOR and INPUT_CNTL_COLOR bits are always equal. - */ -#define R300_VAP_INPUT_CNTL_0 0x2180 -# define R300_INPUT_CNTL_0_COLOR 0x00000001 -#define R300_VAP_INPUT_CNTL_1 0x2184 -# define R300_INPUT_CNTL_POS 0x00000001 -# define R300_INPUT_CNTL_NORMAL 0x00000002 -# define R300_INPUT_CNTL_COLOR 0x00000004 -# define R300_INPUT_CNTL_TC0 0x00000400 -# define R300_INPUT_CNTL_TC1 0x00000800 -# define R300_INPUT_CNTL_TC2 0x00001000 /* GUESS */ -# define R300_INPUT_CNTL_TC3 0x00002000 /* GUESS */ -# define R300_INPUT_CNTL_TC4 0x00004000 /* GUESS */ -# define R300_INPUT_CNTL_TC5 0x00008000 /* GUESS */ -# define R300_INPUT_CNTL_TC6 0x00010000 /* GUESS */ -# define R300_INPUT_CNTL_TC7 0x00020000 /* GUESS */ - -/* gap */ - -/* Words parallel to INPUT_ROUTE_0; All words that are active in INPUT_ROUTE_0 - * are set to a swizzling bit pattern, other words are 0. - * - * In immediate mode, the pattern is always set to xyzw. In vertex array - * mode, the swizzling pattern is e.g. used to set zw components in texture - * coordinates with only tweo components. - */ -#define R300_VAP_INPUT_ROUTE_1_0 0x21E0 -# define R300_INPUT_ROUTE_SELECT_X 0 -# define R300_INPUT_ROUTE_SELECT_Y 1 -# define R300_INPUT_ROUTE_SELECT_Z 2 -# define R300_INPUT_ROUTE_SELECT_W 3 -# define R300_INPUT_ROUTE_SELECT_ZERO 4 -# define R300_INPUT_ROUTE_SELECT_ONE 5 -# define R300_INPUT_ROUTE_SELECT_MASK 7 -# define R300_INPUT_ROUTE_X_SHIFT 0 -# define R300_INPUT_ROUTE_Y_SHIFT 3 -# define R300_INPUT_ROUTE_Z_SHIFT 6 -# define R300_INPUT_ROUTE_W_SHIFT 9 -# define R300_INPUT_ROUTE_ENABLE (15 << 12) -#define R300_VAP_INPUT_ROUTE_1_1 0x21E4 -#define R300_VAP_INPUT_ROUTE_1_2 0x21E8 -#define R300_VAP_INPUT_ROUTE_1_3 0x21EC -#define R300_VAP_INPUT_ROUTE_1_4 0x21F0 -#define R300_VAP_INPUT_ROUTE_1_5 0x21F4 -#define R300_VAP_INPUT_ROUTE_1_6 0x21F8 -#define R300_VAP_INPUT_ROUTE_1_7 0x21FC - -/* END: Vertex data assembly */ - -/* gap */ - -/* BEGIN: Upload vertex program and data */ - -/* - * The programmable vertex shader unit has a memory bank of unknown size - * that can be written to in 16 byte units by writing the address into - * UPLOAD_ADDRESS, followed by data in UPLOAD_DATA (multiples of 4 DWORDs). - * - * Pointers into the memory bank are always in multiples of 16 bytes. - * - * The memory bank is divided into areas with fixed meaning. - * - * Starting at address UPLOAD_PROGRAM: Vertex program instructions. - * Native limits reported by drivers from ATI suggest size 256 (i.e. 4KB), - * whereas the difference between known addresses suggests size 512. - * - * Starting at address UPLOAD_PARAMETERS: Vertex program parameters. - * Native reported limits and the VPI layout suggest size 256, whereas - * difference between known addresses suggests size 512. - * - * At address UPLOAD_POINTSIZE is a vector (0, 0, ps, 0), where ps is the - * floating point pointsize. The exact purpose of this state is uncertain, - * as there is also the R300_RE_POINTSIZE register. - * - * Multiple vertex programs and parameter sets can be loaded at once, - * which could explain the size discrepancy. - */ -#define R300_VAP_PVS_UPLOAD_ADDRESS 0x2200 -# define R300_PVS_UPLOAD_PROGRAM 0x00000000 -# define R300_PVS_UPLOAD_PARAMETERS 0x00000200 -# define R300_PVS_UPLOAD_POINTSIZE 0x00000406 - -/* gap */ - -#define R300_VAP_PVS_UPLOAD_DATA 0x2208 - -/* END: Upload vertex program and data */ - -/* gap */ - -/* I do not know the purpose of this register. However, I do know that - * it is set to 221C_CLEAR for clear operations and to 221C_NORMAL - * for normal rendering. - */ -#define R300_VAP_UNKNOWN_221C 0x221C -# define R300_221C_NORMAL 0x00000000 -# define R300_221C_CLEAR 0x0001C000 - -/* These seem to be per-pixel and per-vertex X and Y clipping planes. The first - * plane is per-pixel and the second plane is per-vertex. - * - * This was determined by experimentation alone but I believe it is correct. - * - * These registers are called X_QUAD0_1_FL to X_QUAD0_4_FL by glxtest. - */ -#define R300_VAP_CLIP_X_0 0x2220 -#define R300_VAP_CLIP_X_1 0x2224 -#define R300_VAP_CLIP_Y_0 0x2228 -#define R300_VAP_CLIP_Y_1 0x2230 - -/* gap */ - -/* Sometimes, END_OF_PKT and 0x2284=0 are the only commands sent between - * rendering commands and overwriting vertex program parameters. - * Therefore, I suspect writing zero to 0x2284 synchronizes the engine and - * avoids bugs caused by still running shaders reading bad data from memory. - */ -#define R300_VAP_PVS_WAITIDLE 0x2284 /* GUESS */ - -/* Absolutely no clue what this register is about. */ -#define R300_VAP_UNKNOWN_2288 0x2288 -# define R300_2288_R300 0x00750000 /* -- nh */ -# define R300_2288_RV350 0x0000FFFF /* -- Vladimir */ - -/* gap */ - -/* Addresses are relative to the vertex program instruction area of the - * memory bank. PROGRAM_END points to the last instruction of the active - * program - * - * The meaning of the two UNKNOWN fields is obviously not known. However, - * experiments so far have shown that both *must* point to an instruction - * inside the vertex program, otherwise the GPU locks up. - * - * fglrx usually sets CNTL_3_UNKNOWN to the end of the program and - * R300_PVS_CNTL_1_POS_END_SHIFT points to instruction where last write to - * position takes place. - * - * Most likely this is used to ignore rest of the program in cases - * where group of verts arent visible. For some reason this "section" - * is sometimes accepted other instruction that have no relationship with - * position calculations. - */ -#define R300_VAP_PVS_CNTL_1 0x22D0 -# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 -# define R300_PVS_CNTL_1_POS_END_SHIFT 10 -# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 -/* Addresses are relative the the vertex program parameters area. */ -#define R300_VAP_PVS_CNTL_2 0x22D4 -# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 -# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 -#define R300_VAP_PVS_CNTL_3 0x22D8 -# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN_SHIFT 10 -# define R300_PVS_CNTL_3_PROGRAM_UNKNOWN2_SHIFT 0 - -/* The entire range from 0x2300 to 0x2AC inclusive seems to be used for - * immediate vertices - */ -#define R300_VAP_VTX_COLOR_R 0x2464 -#define R300_VAP_VTX_COLOR_G 0x2468 -#define R300_VAP_VTX_COLOR_B 0x246C -#define R300_VAP_VTX_POS_0_X_1 0x2490 /* used for glVertex2*() */ -#define R300_VAP_VTX_POS_0_Y_1 0x2494 -#define R300_VAP_VTX_COLOR_PKD 0x249C /* RGBA */ -#define R300_VAP_VTX_POS_0_X_2 0x24A0 /* used for glVertex3*() */ -#define R300_VAP_VTX_POS_0_Y_2 0x24A4 -#define R300_VAP_VTX_POS_0_Z_2 0x24A8 -/* write 0 to indicate end of packet? */ -#define R300_VAP_VTX_END_OF_PKT 0x24AC - -/* gap */ - -/* These are values from r300_reg/r300_reg.h - they are known to be correct - * and are here so we can use one register file instead of several - * - Vladimir - */ -#define R300_GB_VAP_RASTER_VTX_FMT_0 0x4000 -# define R300_GB_VAP_RASTER_VTX_FMT_0__POS_PRESENT (1<<0) -# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_0_PRESENT (1<<1) -# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_1_PRESENT (1<<2) -# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_2_PRESENT (1<<3) -# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_3_PRESENT (1<<4) -# define R300_GB_VAP_RASTER_VTX_FMT_0__COLOR_SPACE (0xf<<5) -# define R300_GB_VAP_RASTER_VTX_FMT_0__PT_SIZE_PRESENT (0x1<<16) - -#define R300_GB_VAP_RASTER_VTX_FMT_1 0x4004 - /* each of the following is 3 bits wide, specifies number - of components */ -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_0_COMP_CNT_SHIFT 0 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_1_COMP_CNT_SHIFT 3 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_2_COMP_CNT_SHIFT 6 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_3_COMP_CNT_SHIFT 9 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_4_COMP_CNT_SHIFT 12 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_5_COMP_CNT_SHIFT 15 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_6_COMP_CNT_SHIFT 18 -# define R300_GB_VAP_RASTER_VTX_FMT_1__TEX_7_COMP_CNT_SHIFT 21 - -/* UNK30 seems to enables point to quad transformation on textures - * (or something closely related to that). - * This bit is rather fatal at the time being due to lackings at pixel - * shader side - */ -#define R300_GB_ENABLE 0x4008 -# define R300_GB_POINT_STUFF_ENABLE (1<<0) -# define R300_GB_LINE_STUFF_ENABLE (1<<1) -# define R300_GB_TRIANGLE_STUFF_ENABLE (1<<2) -# define R300_GB_STENCIL_AUTO_ENABLE (1<<4) -# define R300_GB_UNK31 (1<<31) - /* each of the following is 2 bits wide */ -#define R300_GB_TEX_REPLICATE 0 -#define R300_GB_TEX_ST 1 -#define R300_GB_TEX_STR 2 -# define R300_GB_TEX0_SOURCE_SHIFT 16 -# define R300_GB_TEX1_SOURCE_SHIFT 18 -# define R300_GB_TEX2_SOURCE_SHIFT 20 -# define R300_GB_TEX3_SOURCE_SHIFT 22 -# define R300_GB_TEX4_SOURCE_SHIFT 24 -# define R300_GB_TEX5_SOURCE_SHIFT 26 -# define R300_GB_TEX6_SOURCE_SHIFT 28 -# define R300_GB_TEX7_SOURCE_SHIFT 30 - -/* MSPOS - positions for multisample antialiasing (?) */ -#define R300_GB_MSPOS0 0x4010 - /* shifts - each of the fields is 4 bits */ -# define R300_GB_MSPOS0__MS_X0_SHIFT 0 -# define R300_GB_MSPOS0__MS_Y0_SHIFT 4 -# define R300_GB_MSPOS0__MS_X1_SHIFT 8 -# define R300_GB_MSPOS0__MS_Y1_SHIFT 12 -# define R300_GB_MSPOS0__MS_X2_SHIFT 16 -# define R300_GB_MSPOS0__MS_Y2_SHIFT 20 -# define R300_GB_MSPOS0__MSBD0_Y 24 -# define R300_GB_MSPOS0__MSBD0_X 28 - -#define R300_GB_MSPOS1 0x4014 -# define R300_GB_MSPOS1__MS_X3_SHIFT 0 -# define R300_GB_MSPOS1__MS_Y3_SHIFT 4 -# define R300_GB_MSPOS1__MS_X4_SHIFT 8 -# define R300_GB_MSPOS1__MS_Y4_SHIFT 12 -# define R300_GB_MSPOS1__MS_X5_SHIFT 16 -# define R300_GB_MSPOS1__MS_Y5_SHIFT 20 -# define R300_GB_MSPOS1__MSBD1 24 - - -#define R300_GB_TILE_CONFIG 0x4018 -# define R300_GB_TILE_ENABLE (1<<0) -# define R300_GB_TILE_PIPE_COUNT_RV300 0 -# define R300_GB_TILE_PIPE_COUNT_R300 (3<<1) -# define R300_GB_TILE_PIPE_COUNT_R420 (7<<1) -# define R300_GB_TILE_PIPE_COUNT_RV410 (3<<1) -# define R300_GB_TILE_SIZE_8 0 -# define R300_GB_TILE_SIZE_16 (1<<4) -# define R300_GB_TILE_SIZE_32 (2<<4) -# define R300_GB_SUPER_SIZE_1 (0<<6) -# define R300_GB_SUPER_SIZE_2 (1<<6) -# define R300_GB_SUPER_SIZE_4 (2<<6) -# define R300_GB_SUPER_SIZE_8 (3<<6) -# define R300_GB_SUPER_SIZE_16 (4<<6) -# define R300_GB_SUPER_SIZE_32 (5<<6) -# define R300_GB_SUPER_SIZE_64 (6<<6) -# define R300_GB_SUPER_SIZE_128 (7<<6) -# define R300_GB_SUPER_X_SHIFT 9 /* 3 bits wide */ -# define R300_GB_SUPER_Y_SHIFT 12 /* 3 bits wide */ -# define R300_GB_SUPER_TILE_A 0 -# define R300_GB_SUPER_TILE_B (1<<15) -# define R300_GB_SUBPIXEL_1_12 0 -# define R300_GB_SUBPIXEL_1_16 (1<<16) - -#define R300_GB_FIFO_SIZE 0x4024 - /* each of the following is 2 bits wide */ -#define R300_GB_FIFO_SIZE_32 0 -#define R300_GB_FIFO_SIZE_64 1 -#define R300_GB_FIFO_SIZE_128 2 -#define R300_GB_FIFO_SIZE_256 3 -# define R300_SC_IFIFO_SIZE_SHIFT 0 -# define R300_SC_TZFIFO_SIZE_SHIFT 2 -# define R300_SC_BFIFO_SIZE_SHIFT 4 - -# define R300_US_OFIFO_SIZE_SHIFT 12 -# define R300_US_WFIFO_SIZE_SHIFT 14 - /* the following use the same constants as above, but meaning is - is times 2 (i.e. instead of 32 words it means 64 */ -# define R300_RS_TFIFO_SIZE_SHIFT 6 -# define R300_RS_CFIFO_SIZE_SHIFT 8 -# define R300_US_RAM_SIZE_SHIFT 10 - /* watermarks, 3 bits wide */ -# define R300_RS_HIGHWATER_COL_SHIFT 16 -# define R300_RS_HIGHWATER_TEX_SHIFT 19 -# define R300_OFIFO_HIGHWATER_SHIFT 22 /* two bits only */ -# define R300_CUBE_FIFO_HIGHWATER_COL_SHIFT 24 - -#define R300_GB_SELECT 0x401C -# define R300_GB_FOG_SELECT_C0A 0 -# define R300_GB_FOG_SELECT_C1A 1 -# define R300_GB_FOG_SELECT_C2A 2 -# define R300_GB_FOG_SELECT_C3A 3 -# define R300_GB_FOG_SELECT_1_1_W 4 -# define R300_GB_FOG_SELECT_Z 5 -# define R300_GB_DEPTH_SELECT_Z 0 -# define R300_GB_DEPTH_SELECT_1_1_W (1<<3) -# define R300_GB_W_SELECT_1_W 0 -# define R300_GB_W_SELECT_1 (1<<4) - -#define R300_GB_AA_CONFIG 0x4020 -# define R300_AA_DISABLE 0x00 -# define R300_AA_ENABLE 0x01 -# define R300_AA_SUBSAMPLES_2 0 -# define R300_AA_SUBSAMPLES_3 (1<<1) -# define R300_AA_SUBSAMPLES_4 (2<<1) -# define R300_AA_SUBSAMPLES_6 (3<<1) - -/* gap */ - -/* Zero to flush caches. */ -#define R300_TX_CNTL 0x4100 -#define R300_TX_FLUSH 0x0 - -/* The upper enable bits are guessed, based on fglrx reported limits. */ -#define R300_TX_ENABLE 0x4104 -# define R300_TX_ENABLE_0 (1 << 0) -# define R300_TX_ENABLE_1 (1 << 1) -# define R300_TX_ENABLE_2 (1 << 2) -# define R300_TX_ENABLE_3 (1 << 3) -# define R300_TX_ENABLE_4 (1 << 4) -# define R300_TX_ENABLE_5 (1 << 5) -# define R300_TX_ENABLE_6 (1 << 6) -# define R300_TX_ENABLE_7 (1 << 7) -# define R300_TX_ENABLE_8 (1 << 8) -# define R300_TX_ENABLE_9 (1 << 9) -# define R300_TX_ENABLE_10 (1 << 10) -# define R300_TX_ENABLE_11 (1 << 11) -# define R300_TX_ENABLE_12 (1 << 12) -# define R300_TX_ENABLE_13 (1 << 13) -# define R300_TX_ENABLE_14 (1 << 14) -# define R300_TX_ENABLE_15 (1 << 15) - -/* The pointsize is given in multiples of 6. The pointsize can be - * enormous: Clear() renders a single point that fills the entire - * framebuffer. - */ -#define R300_RE_POINTSIZE 0x421C -# define R300_POINTSIZE_Y_SHIFT 0 -# define R300_POINTSIZE_Y_MASK (0xFFFF << 0) /* GUESS */ -# define R300_POINTSIZE_X_SHIFT 16 -# define R300_POINTSIZE_X_MASK (0xFFFF << 16) /* GUESS */ -# define R300_POINTSIZE_MAX (R300_POINTSIZE_Y_MASK / 6) - -/* The line width is given in multiples of 6. - * In default mode lines are classified as vertical lines. - * HO: horizontal - * VE: vertical or horizontal - * HO & VE: no classification - */ -#define R300_RE_LINE_CNT 0x4234 -# define R300_LINESIZE_SHIFT 0 -# define R300_LINESIZE_MASK (0xFFFF << 0) /* GUESS */ -# define R300_LINESIZE_MAX (R300_LINESIZE_MASK / 6) -# define R300_LINE_CNT_HO (1 << 16) -# define R300_LINE_CNT_VE (1 << 17) - -/* Some sort of scale or clamp value for texcoordless textures. */ -#define R300_RE_UNK4238 0x4238 - -/* Something shade related */ -#define R300_RE_SHADE 0x4274 - -#define R300_RE_SHADE_MODEL 0x4278 -# define R300_RE_SHADE_MODEL_SMOOTH 0x3aaaa -# define R300_RE_SHADE_MODEL_FLAT 0x39595 - -/* Dangerous */ -#define R300_RE_POLYGON_MODE 0x4288 -# define R300_PM_ENABLED (1 << 0) -# define R300_PM_FRONT_POINT (0 << 0) -# define R300_PM_BACK_POINT (0 << 0) -# define R300_PM_FRONT_LINE (1 << 4) -# define R300_PM_FRONT_FILL (1 << 5) -# define R300_PM_BACK_LINE (1 << 7) -# define R300_PM_BACK_FILL (1 << 8) - -/* Fog parameters */ -#define R300_RE_FOG_SCALE 0x4294 -#define R300_RE_FOG_START 0x4298 - -/* Not sure why there are duplicate of factor and constant values. - * My best guess so far is that there are separate zbiases for test and write. - * Ordering might be wrong. - * Some of the tests indicate that fgl has a fallback implementation of zbias - * via pixel shaders. - */ -#define R300_RE_ZBIAS_CNTL 0x42A0 /* GUESS */ -#define R300_RE_ZBIAS_T_FACTOR 0x42A4 -#define R300_RE_ZBIAS_T_CONSTANT 0x42A8 -#define R300_RE_ZBIAS_W_FACTOR 0x42AC -#define R300_RE_ZBIAS_W_CONSTANT 0x42B0 - -/* This register needs to be set to (1<<1) for RV350 to correctly - * perform depth test (see --vb-triangles in r300_demo) - * Don't know about other chips. - Vladimir - * This is set to 3 when GL_POLYGON_OFFSET_FILL is on. - * My guess is that there are two bits for each zbias primitive - * (FILL, LINE, POINT). - * One to enable depth test and one for depth write. - * Yet this doesnt explain why depth writes work ... - */ -#define R300_RE_OCCLUSION_CNTL 0x42B4 -# define R300_OCCLUSION_ON (1<<1) - -#define R300_RE_CULL_CNTL 0x42B8 -# define R300_CULL_FRONT (1 << 0) -# define R300_CULL_BACK (1 << 1) -# define R300_FRONT_FACE_CCW (0 << 2) -# define R300_FRONT_FACE_CW (1 << 2) - - -/* BEGIN: Rasterization / Interpolators - many guesses */ - -/* 0_UNKNOWN_18 has always been set except for clear operations. - * TC_CNT is the number of incoming texture coordinate sets (i.e. it depends - * on the vertex program, *not* the fragment program) - */ -#define R300_RS_CNTL_0 0x4300 -# define R300_RS_CNTL_TC_CNT_SHIFT 2 -# define R300_RS_CNTL_TC_CNT_MASK (7 << 2) - /* number of color interpolators used */ -# define R300_RS_CNTL_CI_CNT_SHIFT 7 -# define R300_RS_CNTL_0_UNKNOWN_18 (1 << 18) - /* Guess: RS_CNTL_1 holds the index of the highest used RS_ROUTE_n - register. */ -#define R300_RS_CNTL_1 0x4304 - -/* gap */ - -/* Only used for texture coordinates. - * Use the source field to route texture coordinate input from the - * vertex program to the desired interpolator. Note that the source - * field is relative to the outputs the vertex program *actually* - * writes. If a vertex program only writes texcoord[1], this will - * be source index 0. - * Set INTERP_USED on all interpolators that produce data used by - * the fragment program. INTERP_USED looks like a swizzling mask, - * but I haven't seen it used that way. - * - * Note: The _UNKNOWN constants are always set in their respective - * register. I don't know if this is necessary. - */ -#define R300_RS_INTERP_0 0x4310 -#define R300_RS_INTERP_1 0x4314 -# define R300_RS_INTERP_1_UNKNOWN 0x40 -#define R300_RS_INTERP_2 0x4318 -# define R300_RS_INTERP_2_UNKNOWN 0x80 -#define R300_RS_INTERP_3 0x431C -# define R300_RS_INTERP_3_UNKNOWN 0xC0 -#define R300_RS_INTERP_4 0x4320 -#define R300_RS_INTERP_5 0x4324 -#define R300_RS_INTERP_6 0x4328 -#define R300_RS_INTERP_7 0x432C -# define R300_RS_INTERP_SRC_SHIFT 2 -# define R300_RS_INTERP_SRC_MASK (7 << 2) -# define R300_RS_INTERP_USED 0x00D10000 - -/* These DWORDs control how vertex data is routed into fragment program - * registers, after interpolators. - */ -#define R300_RS_ROUTE_0 0x4330 -#define R300_RS_ROUTE_1 0x4334 -#define R300_RS_ROUTE_2 0x4338 -#define R300_RS_ROUTE_3 0x433C /* GUESS */ -#define R300_RS_ROUTE_4 0x4340 /* GUESS */ -#define R300_RS_ROUTE_5 0x4344 /* GUESS */ -#define R300_RS_ROUTE_6 0x4348 /* GUESS */ -#define R300_RS_ROUTE_7 0x434C /* GUESS */ -# define R300_RS_ROUTE_SOURCE_INTERP_0 0 -# define R300_RS_ROUTE_SOURCE_INTERP_1 1 -# define R300_RS_ROUTE_SOURCE_INTERP_2 2 -# define R300_RS_ROUTE_SOURCE_INTERP_3 3 -# define R300_RS_ROUTE_SOURCE_INTERP_4 4 -# define R300_RS_ROUTE_SOURCE_INTERP_5 5 /* GUESS */ -# define R300_RS_ROUTE_SOURCE_INTERP_6 6 /* GUESS */ -# define R300_RS_ROUTE_SOURCE_INTERP_7 7 /* GUESS */ -# define R300_RS_ROUTE_ENABLE (1 << 3) /* GUESS */ -# define R300_RS_ROUTE_DEST_SHIFT 6 -# define R300_RS_ROUTE_DEST_MASK (31 << 6) /* GUESS */ - -/* Special handling for color: When the fragment program uses color, - * the ROUTE_0_COLOR bit is set and ROUTE_0_COLOR_DEST contains the - * color register index. - * - * Apperently you may set the R300_RS_ROUTE_0_COLOR bit, but not provide any - * R300_RS_ROUTE_0_COLOR_DEST value; this setup is used for clearing the state. - * See r300_ioctl.c:r300EmitClearState. I'm not sure if this setup is strictly - * correct or not. - Oliver. - */ -# define R300_RS_ROUTE_0_COLOR (1 << 14) -# define R300_RS_ROUTE_0_COLOR_DEST_SHIFT 17 -# define R300_RS_ROUTE_0_COLOR_DEST_MASK (31 << 17) /* GUESS */ -/* As above, but for secondary color */ -# define R300_RS_ROUTE_1_COLOR1 (1 << 14) -# define R300_RS_ROUTE_1_COLOR1_DEST_SHIFT 17 -# define R300_RS_ROUTE_1_COLOR1_DEST_MASK (31 << 17) -# define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) -/* END: Rasterization / Interpolators - many guesses */ - -/* Hierarchical Z Enable */ -#define R300_SC_HYPERZ 0x43a4 -# define R300_SC_HYPERZ_DISABLE (0 << 0) -# define R300_SC_HYPERZ_ENABLE (1 << 0) -# define R300_SC_HYPERZ_MIN (0 << 1) -# define R300_SC_HYPERZ_MAX (1 << 1) -# define R300_SC_HYPERZ_ADJ_256 (0 << 2) -# define R300_SC_HYPERZ_ADJ_128 (1 << 2) -# define R300_SC_HYPERZ_ADJ_64 (2 << 2) -# define R300_SC_HYPERZ_ADJ_32 (3 << 2) -# define R300_SC_HYPERZ_ADJ_16 (4 << 2) -# define R300_SC_HYPERZ_ADJ_8 (5 << 2) -# define R300_SC_HYPERZ_ADJ_4 (6 << 2) -# define R300_SC_HYPERZ_ADJ_2 (7 << 2) -# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5) -# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5) -# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6) -# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6) - -#define R300_SC_EDGERULE 0x43a8 - -/* BEGIN: Scissors and cliprects */ - -/* There are four clipping rectangles. Their corner coordinates are inclusive. - * Every pixel is assigned a number from 0 and 15 by setting bits 0-3 depending - * on whether the pixel is inside cliprects 0-3, respectively. For example, - * if a pixel is inside cliprects 0 and 1, but outside 2 and 3, it is assigned - * the number 3 (binary 0011). - * Iff the bit corresponding to the pixel's number in RE_CLIPRECT_CNTL is set, - * the pixel is rasterized. - * - * In addition to this, there is a scissors rectangle. Only pixels inside the - * scissors rectangle are drawn. (coordinates are inclusive) - * - * For some reason, the top-left corner of the framebuffer is at (1440, 1440) - * for the purpose of clipping and scissors. - */ -#define R300_RE_CLIPRECT_TL_0 0x43B0 -#define R300_RE_CLIPRECT_BR_0 0x43B4 -#define R300_RE_CLIPRECT_TL_1 0x43B8 -#define R300_RE_CLIPRECT_BR_1 0x43BC -#define R300_RE_CLIPRECT_TL_2 0x43C0 -#define R300_RE_CLIPRECT_BR_2 0x43C4 -#define R300_RE_CLIPRECT_TL_3 0x43C8 -#define R300_RE_CLIPRECT_BR_3 0x43CC -# define R300_CLIPRECT_OFFSET 1440 -# define R300_CLIPRECT_MASK 0x1FFF -# define R300_CLIPRECT_X_SHIFT 0 -# define R300_CLIPRECT_X_MASK (0x1FFF << 0) -# define R300_CLIPRECT_Y_SHIFT 13 -# define R300_CLIPRECT_Y_MASK (0x1FFF << 13) -#define R300_RE_CLIPRECT_CNTL 0x43D0 -# define R300_CLIP_OUT (1 << 0) -# define R300_CLIP_0 (1 << 1) -# define R300_CLIP_1 (1 << 2) -# define R300_CLIP_10 (1 << 3) -# define R300_CLIP_2 (1 << 4) -# define R300_CLIP_20 (1 << 5) -# define R300_CLIP_21 (1 << 6) -# define R300_CLIP_210 (1 << 7) -# define R300_CLIP_3 (1 << 8) -# define R300_CLIP_30 (1 << 9) -# define R300_CLIP_31 (1 << 10) -# define R300_CLIP_310 (1 << 11) -# define R300_CLIP_32 (1 << 12) -# define R300_CLIP_320 (1 << 13) -# define R300_CLIP_321 (1 << 14) -# define R300_CLIP_3210 (1 << 15) - -/* gap */ - -#define R300_RE_SCISSORS_TL 0x43E0 -#define R300_RE_SCISSORS_BR 0x43E4 -# define R300_SCISSORS_OFFSET 1440 -# define R300_SCISSORS_X_SHIFT 0 -# define R300_SCISSORS_X_MASK (0x1FFF << 0) -# define R300_SCISSORS_Y_SHIFT 13 -# define R300_SCISSORS_Y_MASK (0x1FFF << 13) -/* END: Scissors and cliprects */ - -/* BEGIN: Texture specification */ - -/* - * The texture specification dwords are grouped by meaning and not by texture - * unit. This means that e.g. the offset for texture image unit N is found in - * register TX_OFFSET_0 + (4*N) - */ -#define R300_TX_FILTER_0 0x4400 -# define R300_TX_REPEAT 0 -# define R300_TX_MIRRORED 1 -# define R300_TX_CLAMP 4 -# define R300_TX_CLAMP_TO_EDGE 2 -# define R300_TX_CLAMP_TO_BORDER 6 -# define R300_TX_WRAP_S_SHIFT 0 -# define R300_TX_WRAP_S_MASK (7 << 0) -# define R300_TX_WRAP_T_SHIFT 3 -# define R300_TX_WRAP_T_MASK (7 << 3) -# define R300_TX_WRAP_Q_SHIFT 6 -# define R300_TX_WRAP_Q_MASK (7 << 6) -# define R300_TX_MAG_FILTER_NEAREST (1 << 9) -# define R300_TX_MAG_FILTER_LINEAR (2 << 9) -# define R300_TX_MAG_FILTER_MASK (3 << 9) -# define R300_TX_MIN_FILTER_NEAREST (1 << 11) -# define R300_TX_MIN_FILTER_LINEAR (2 << 11) -# define R300_TX_MIN_FILTER_NEAREST_MIP_NEAREST (5 << 11) -# define R300_TX_MIN_FILTER_NEAREST_MIP_LINEAR (9 << 11) -# define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST (6 << 11) -# define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR (10 << 11) - -/* NOTE: NEAREST doesnt seem to exist. - * Im not seting MAG_FILTER_MASK and (3 << 11) on for all - * anisotropy modes because that would void selected mag filter - */ -# define R300_TX_MIN_FILTER_ANISO_NEAREST (0 << 13) -# define R300_TX_MIN_FILTER_ANISO_LINEAR (0 << 13) -# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_NEAREST (1 << 13) -# define R300_TX_MIN_FILTER_ANISO_NEAREST_MIP_LINEAR (2 << 13) -# define R300_TX_MIN_FILTER_MASK ( (15 << 11) | (3 << 13) ) -# define R300_TX_MAX_ANISO_1_TO_1 (0 << 21) -# define R300_TX_MAX_ANISO_2_TO_1 (2 << 21) -# define R300_TX_MAX_ANISO_4_TO_1 (4 << 21) -# define R300_TX_MAX_ANISO_8_TO_1 (6 << 21) -# define R300_TX_MAX_ANISO_16_TO_1 (8 << 21) -# define R300_TX_MAX_ANISO_MASK (14 << 21) - -#define R300_TX_FILTER1_0 0x4440 -# define R300_CHROMA_KEY_MODE_DISABLE 0 -# define R300_CHROMA_KEY_FORCE 1 -# define R300_CHROMA_KEY_BLEND 2 -# define R300_MC_ROUND_NORMAL (0<<2) -# define R300_MC_ROUND_MPEG4 (1<<2) -# define R300_LOD_BIAS_MASK 0x1fff -# define R300_EDGE_ANISO_EDGE_DIAG (0<<13) -# define R300_EDGE_ANISO_EDGE_ONLY (1<<13) -# define R300_MC_COORD_TRUNCATE_DISABLE (0<<14) -# define R300_MC_COORD_TRUNCATE_MPEG (1<<14) -# define R300_TX_TRI_PERF_0_8 (0<<15) -# define R300_TX_TRI_PERF_1_8 (1<<15) -# define R300_TX_TRI_PERF_1_4 (2<<15) -# define R300_TX_TRI_PERF_3_8 (3<<15) -# define R300_ANISO_THRESHOLD_MASK (7<<17) - -#define R300_TX_SIZE_0 0x4480 -# define R300_TX_WIDTHMASK_SHIFT 0 -# define R300_TX_WIDTHMASK_MASK (2047 << 0) -# define R300_TX_HEIGHTMASK_SHIFT 11 -# define R300_TX_HEIGHTMASK_MASK (2047 << 11) -# define R300_TX_UNK23 (1 << 23) -# define R300_TX_MAX_MIP_LEVEL_SHIFT 26 -# define R300_TX_MAX_MIP_LEVEL_MASK (0xf << 26) -# define R300_TX_SIZE_PROJECTED (1<<30) -# define R300_TX_SIZE_TXPITCH_EN (1<<31) -#define R300_TX_FORMAT_0 0x44C0 - /* The interpretation of the format word by Wladimir van der Laan */ - /* The X, Y, Z and W refer to the layout of the components. - They are given meanings as R, G, B and Alpha by the swizzle - specification */ -# define R300_TX_FORMAT_X8 0x0 -# define R300_TX_FORMAT_X16 0x1 -# define R300_TX_FORMAT_Y4X4 0x2 -# define R300_TX_FORMAT_Y8X8 0x3 -# define R300_TX_FORMAT_Y16X16 0x4 -# define R300_TX_FORMAT_Z3Y3X2 0x5 -# define R300_TX_FORMAT_Z5Y6X5 0x6 -# define R300_TX_FORMAT_Z6Y5X5 0x7 -# define R300_TX_FORMAT_Z11Y11X10 0x8 -# define R300_TX_FORMAT_Z10Y11X11 0x9 -# define R300_TX_FORMAT_W4Z4Y4X4 0xA |