diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/ahci.c | 13 | ||||
-rw-r--r-- | drivers/ata/ahci_brcmstb.c | 6 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 27 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 105 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 21 | ||||
-rw-r--r-- | drivers/ata/libata.h | 6 | ||||
-rw-r--r-- | drivers/ata/pata_arasan_cf.c | 11 | ||||
-rw-r--r-- | drivers/ata/pata_jmicron.c | 12 | ||||
-rw-r--r-- | drivers/ata/pata_rb532_cf.c | 3 | ||||
-rw-r--r-- | drivers/ata/sata_rcar.c | 4 | ||||
-rw-r--r-- | drivers/ata/sata_sx4.c | 16 |
11 files changed, 33 insertions, 191 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 7e62751abfac..a46660204e3a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* JMicron 362B and 362C have an AHCI function with IDE class code */ { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, + /* May need to update quirk_jmicron_async_suspend() for additions */ /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ @@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) else if (pdev->vendor == 0x177d && pdev->device == 0xa01c) ahci_pci_bar = AHCI_PCI_BAR_CAVIUM; - /* - * The JMicron chip 361/363 contains one SATA controller and one - * PATA controller,for powering on these both controllers, we must - * follow the sequence one by one, otherwise one of them can not be - * powered on successfully, so here we disable the async suspend - * method for these chips. - */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && - (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || - pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) - device_disable_async_suspend(&pdev->dev); - /* acquire resources */ rc = pcim_enable_device(pdev); if (rc) diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c index ce1e3a885981..14b7305d2ba0 100644 --- a/drivers/ata/ahci_brcmstb.c +++ b/drivers/ata/ahci_brcmstb.c @@ -92,7 +92,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr) * Other architectures (e.g., ARM) either do not support big endian, or * else leave I/O in little endian mode. */ - if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) return __raw_readl(addr); else return readl_relaxed(addr); @@ -101,7 +101,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr) static inline void brcm_sata_writereg(u32 val, void __iomem *addr) { /* See brcm_sata_readreg() comments */ - if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) __raw_writel(val, addr); else writel_relaxed(val, addr); @@ -209,6 +209,7 @@ static void brcm_sata_init(struct brcm_ahci_priv *priv) priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL); } +#ifdef CONFIG_PM_SLEEP static int brcm_ahci_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); @@ -231,6 +232,7 @@ static int brcm_ahci_resume(struct device *dev) brcm_sata_phys_enable(priv); return ahci_platform_resume(dev); } +#endif static struct scsi_host_template ahci_platform_sht = { AHCI_SHT(DRV_NAME), diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index db5d9f79a247..b79cb10e289e 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -694,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) * RETURNS: * Block address read from @tf. */ -u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev) +u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) { u64 block = 0; - if (!dev || tf->flags & ATA_TFLAG_LBA) { + if (tf->flags & ATA_TFLAG_LBA) { if (tf->flags & ATA_TFLAG_LBA48) { block |= (u64)tf->hob_lbah << 40; block |= (u64)tf->hob_lbam << 32; @@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev, return 0; } -static void ata_dev_config_sense_reporting(struct ata_device *dev) -{ - unsigned int err_mask; - - if (!ata_id_has_sense_reporting(dev->id)) - return; - - if (ata_id_sense_reporting_enabled(dev->id)) - return; - - err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1); - if (err_mask) { - ata_dev_dbg(dev, - "failed to enable Sense Data Reporting, Emask 0x%x\n", - err_mask); - } -} - /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure @@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev) dev->devslp_timing[i] = sata_setting[j]; } } - ata_dev_config_sense_reporting(dev); + dev->cdb_len = 16; } @@ -4248,6 +4230,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, /* devices that don't properly handle TRIM commands */ { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, @@ -4769,6 +4753,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure + * @tag: tag * * LOCKING: * None. diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7465031a893c..cb0508af1459 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1592,8 +1592,6 @@ static int ata_eh_read_log_10h(struct ata_device *dev, tf->hob_lbah = buf[10]; tf->nsect = buf[12]; tf->hob_nsect = buf[13]; - if (ata_id_has_ncq_autosense(dev->id)) - tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16]; return 0; } @@ -1630,70 +1628,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key) } /** - * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT - * @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to - * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) - * @dfl_sense_key: default sense key to use - * - * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK - * SENSE. This function is EH helper. - * - * LOCKING: - * Kernel thread context (may sleep). - * - * RETURNS: - * encoded sense data on success, 0 on failure or if sense data - * is not available. - */ -static u32 ata_eh_request_sense(struct ata_queued_cmd *qc, - struct scsi_cmnd *cmd) -{ - struct ata_device *dev = qc->dev; - struct ata_taskfile tf; - unsigned int err_mask; - - if (!cmd) - return 0; - - DPRINTK("ATA request sense\n"); - ata_dev_warn(dev, "request sense\n"); - if (!ata_id_sense_reporting_enabled(dev->id)) { - ata_dev_warn(qc->dev, "sense data reporting disabled\n"); - return 0; - } - ata_tf_init(dev, &tf); - - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; - tf.command = ATA_CMD_REQ_SENSE_DATA; - tf.protocol = ATA_PROT_NODATA; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); - /* - * ACS-4 states: - * The device may set the SENSE DATA AVAILABLE bit to one in the - * STATUS field and clear the ERROR bit to zero in the STATUS field - * to indicate that the command returned completion without an error - * and the sense data described in table 306 is available. - * - * IOW the 'ATA_SENSE' bit might not be set even though valid - * sense data is available. - * So check for both. - */ - if ((tf.command & ATA_SENSE) || - tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) { - ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal); - qc->flags |= ATA_QCFLAG_SENSE_VALID; - ata_dev_warn(dev, "sense data %02x/%02x/%02x\n", - tf.lbah, tf.lbam, tf.lbal); - } else { - ata_dev_warn(dev, "request sense failed stat %02x emask %x\n", - tf.command, err_mask); - } - return err_mask; -} - -/** * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE * @dev: device to perform REQUEST_SENSE to * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) @@ -1855,19 +1789,6 @@ void ata_eh_analyze_ncq_error(struct ata_link *link) memcpy(&qc->result_tf, &tf, sizeof(tf)); qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48; qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ; - if (qc->result_tf.auxiliary) { - char sense_key, asc, ascq; - - sense_key = (qc->result_tf.auxiliary >> 16) & 0xff; - asc = (qc->result_tf.auxiliary >> 8) & 0xff; - ascq = qc->result_tf.auxiliary & 0xff; - ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n", - sense_key, asc, ascq); - ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq); - ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf); - qc->flags |= ATA_QCFLAG_SENSE_VALID; - } - ehc->i.err_mask &= ~AC_ERR_DEV; } @@ -1897,27 +1818,6 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, return ATA_EH_RESET; } - /* - * Sense data reporting does not work if the - * device fault bit is set. - */ - if ((stat & ATA_SENSE) && !(stat & ATA_DF) && - !(qc->flags & ATA_QCFLAG_SENSE_VALID)) { - if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { - tmp = ata_eh_request_sense(qc, qc->scsicmd); - if (tmp) - qc->err_mask |= tmp; - else - ata_scsi_set_sense_information(qc->scsicmd, tf); - } else { - ata_dev_warn(qc->dev, "sense data available but port frozen\n"); - } - } - - /* Set by NCQ autosense or request sense above */ - if (qc->flags & ATA_QCFLAG_SENSE_VALID) - return 0; - if (stat & (ATA_ERR | ATA_DF)) qc->err_mask |= AC_ERR_DEV; else @@ -2661,15 +2561,14 @@ static void ata_eh_link_report(struct ata_link *link) #ifdef CONFIG_ATA_VERBOSE_ERROR if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | - ATA_SENSE | ATA_ERR)) { + ATA_ERR)) { if (res->command & ATA_BUSY) ata_dev_err(qc->dev, "status: { Busy }\n"); else - ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n", + ata_dev_err(qc->dev, "status: { %s%s%s%s}\n", res->command & ATA_DRDY ? "DRDY " : "", res->command & ATA_DF ? "DF " : "", res->command & ATA_DRQ ? "DRQ " : "", - res->command & ATA_SENSE ? "SENSE " : "", res->command & ATA_ERR ? "ERR " : ""); } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 641a61a59e89..0d7f0da3a269 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -270,28 +270,13 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR, ata_scsi_park_show, ata_scsi_park_store); EXPORT_SYMBOL_GPL(dev_attr_unload_heads); -void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) { - if (!cmd) - return; - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq); } -void ata_scsi_set_sense_information(struct scsi_cmnd *cmd, - const struct ata_taskfile *tf) -{ - u64 information; - - if (!cmd) - return; - - information = ata_tf_read_block(tf, NULL); - scsi_set_sense_information(cmd->sense_buffer, information); -} - static ssize_t ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) @@ -1792,9 +1777,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) ((cdb[2] & 0x20) || need_sense)) { ata_gen_passthru_sense(qc); } else { - if (qc->flags & ATA_QCFLAG_SENSE_VALID) { - cmd->result = SAM_STAT_CHECK_CONDITION; - } else if (!need_sense) { + if (!need_sense) { cmd->result = SAM_STAT_GOOD; } else { /* TODO: decide which descriptor format to use diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index a998a175f9f1..f840ca18a7c0 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -67,8 +67,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); -extern u64 ata_tf_read_block(const struct ata_taskfile *tf, - struct ata_device *dev); +extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); extern unsigned ata_exec_internal(struct ata_device *dev, struct ata_taskfile *tf, const u8 *cdb, int dma_dir, void *buf, unsigned int buflen, @@ -138,9 +137,6 @@ extern int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht); extern void ata_scsi_scan_host(struct ata_port *ap, int sync); extern int ata_scsi_offline_dev(struct ata_device *dev); -extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq); -extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd, - const struct ata_taskfile *tf); extern void ata_scsi_media_change_notify(struct ata_device *dev); extern void ata_scsi_hotplug(struct work_struct *work); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 5d9ee99c2148..80fe0f6fed29 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -834,7 +834,7 @@ static int arasan_cf_probe(struct platform_device *pdev) return -ENOMEM; } - acdev->clk = clk_get(&pdev->dev, NULL); + acdev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(acdev->clk)) { dev_warn(&pdev->dev, "Clock not found\n"); return PTR_ERR(acdev->clk); @@ -843,9 +843,8 @@ static int arasan_cf_probe(struct platform_device *pdev) /* allocate host */ host = ata_host_alloc(&pdev->dev, 1); if (!host) { - ret = -ENOMEM; dev_warn(&pdev->dev, "alloc host fail\n"); - goto free_clk; + return -ENOMEM; } ap = host->ports[0]; @@ -894,7 +893,7 @@ static int arasan_cf_probe(struct platform_device *pdev) ret = cf_init(acdev); if (ret) - goto free_clk; + return ret; cf_card_detect(acdev, 0); @@ -904,8 +903,7 @@ static int arasan_cf_probe(struct platform_device *pdev) return 0; cf_exit(acdev); -free_clk: - clk_put(acdev->clk); + return ret; } @@ -916,7 +914,6 @@ static int arasan_cf_remove(struct platform_device *pdev) ata_host_detach(host); cf_exit(acdev); - clk_put(acdev->clk); return 0; } diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 47e418b8c8ba..4d1a5d2c4287 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i }; const struct ata_port_info *ppi[] = { &info, NULL }; - /* - * The JMicron chip 361/363 contains one SATA controller and one - * PATA controller,for powering on these both controllers, we must - * follow the sequence one by one, otherwise one of them can not be - * powered on successfully, so here we disable the async suspend - * method for these chips. - */ - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && - (pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 || - pdev->device == PCI_DEVICE_ID_JMICRON_JMB361)) - device_disable_async_suspend(&pdev->dev); - return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0); } diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 6d08446b877c..12fe0f3bb7e9 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -27,12 +27,11 @@ #include <linux/io.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <linux/libata.h> #include <scsi/scsi_host.h> -#include <asm/gpio.h> - #define DRV_NAME "pata-rb532-cf" #define DRV_VERSION "0.1.0" #define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash" diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index d49a5193b7de..8804127b108c 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -861,10 +861,6 @@ MODULE_DEVICE_TABLE(of, sata_rcar_match); static const struct platform_device_id sata_rcar_id_table[] = { { "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */ { "sata-r8a7779", RCAR_GEN1_SATA }, - { "sata-r8a7790", RCAR_GEN2_SATA }, - { "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA }, - { "sata-r8a7791", RCAR_GEN2_SATA }, - { "sata-r8a7793", RCAR_GEN2_SATA }, { }, }; MODULE_DEVICE_TABLE(platform, sata_rcar_id_table); diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 3a18a8a719b4..fab504fd9cfd 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1238,8 +1238,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host) readl(mmio + PDC_SDRAM_CONTROL); /* Turn on for ECC */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n", + PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { data |= (0x01 << 16); writel(data, mmio + PDC_SDRAM_CONTROL); @@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) /* ECC initiliazation. */ - pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, - PDC_DIMM_SPD_TYPE, &spd0); + if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, + PDC_DIMM_SPD_TYPE, &spd0)) { + pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n", + PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE); + return 1; + } if (spd0 == 0x02) { void *buf; VPRINTK("Start ECC initialization\n"); |