diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/x86/entry/calling.h | 66 | ||||
| -rw-r--r-- | arch/x86/entry/entry_64.S | 45 | ||||
| -rw-r--r-- | arch/x86/entry/entry_64_compat.S | 24 |
3 files changed, 128 insertions, 7 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index 3fd8bc560fae..a9d17a7686ab 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include <linux/jump_label.h> #include <asm/unwind_hints.h> +#include <asm/cpufeatures.h> +#include <asm/page_types.h> /* @@ -187,6 +189,70 @@ For 32-bit we have the following conventions - kernel is built with #endif .endm +#ifdef CONFIG_PAGE_TABLE_ISOLATION + +/* PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two halves: */ +#define PTI_SWITCH_MASK (1<<PAGE_SHIFT) + +.macro ADJUST_KERNEL_CR3 reg:req + /* Clear "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */ + andq $(~PTI_SWITCH_MASK), \reg +.endm + +.macro ADJUST_USER_CR3 reg:req + /* Move CR3 up a page to the user page tables: */ + orq $(PTI_SWITCH_MASK), \reg +.endm + +.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req + mov %cr3, \scratch_reg + ADJUST_KERNEL_CR3 \scratch_reg + mov \scratch_reg, %cr3 +.endm + +.macro SWITCH_TO_USER_CR3 scratch_reg:req + mov %cr3, \scratch_reg + ADJUST_USER_CR3 \scratch_reg + mov \scratch_reg, %cr3 +.endm + +.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req + movq %cr3, \scratch_reg + movq \scratch_reg, \save_reg + /* + * Is the switch bit zero? This means the address is + * up in real PAGE_TABLE_ISOLATION patches in a moment. + */ + testq $(PTI_SWITCH_MASK), \scratch_reg + jz .Ldone_\@ + + ADJUST_KERNEL_CR3 \scratch_reg + movq \scratch_reg, %cr3 + +.Ldone_\@: +.endm + +.macro RESTORE_CR3 save_reg:req + /* + * The CR3 write could be avoided when not changing its value, + * but would require a CR3 read *and* a scratch register. + */ + movq \save_reg, %cr3 +.endm + +#else /* CONFIG_PAGE_TABLE_ISOLATION=n: */ + +.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req +.endm +.macro SWITCH_TO_USER_CR3 scratch_reg:req +.endm +.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req +.endm +.macro RESTORE_CR3 save_reg:req +.endm + +#endif + #endif /* CONFIG_X86_64 */ /* diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 87cebe78bbef..2ad7ad4d3dd6 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -164,6 +164,9 @@ ENTRY(entry_SYSCALL_64_trampoline) /* Stash the user RSP. */ movq %rsp, RSP_SCRATCH + /* Note: using %rsp as a scratch reg. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + /* Load the top of the task stack into RSP */ movq CPU_ENTRY_AREA_tss + TSS_sp1 + CPU_ENTRY_AREA, %rsp @@ -203,6 +206,10 @@ ENTRY(entry_SYSCALL_64) */ swapgs + /* + * This path is not taken when PAGE_TABLE_ISOLATION is disabled so it + * is not required to switch CR3. + */ movq %rsp, PER_CPU_VAR(rsp_scratch) movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp @@ -399,6 +406,7 @@ syscall_return_via_sysret: * We are on the trampoline stack. All regs except RDI are live. * We can do future final exit work right here. */ + SWITCH_TO_USER_CR3 scratch_reg=%rdi popq %rdi popq %rsp @@ -736,6 +744,8 @@ GLOBAL(swapgs_restore_regs_and_return_to_usermode) * We can do future final exit work right here. */ + SWITCH_TO_USER_CR3 scratch_reg=%rdi + /* Restore RDI. */ popq %rdi SWAPGS @@ -818,7 +828,9 @@ native_irq_return_ldt: */ pushq %rdi /* Stash user RDI */ - SWAPGS + SWAPGS /* to kernel GS */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi /* to kernel CR3 */ + movq PER_CPU_VAR(espfix_waddr), %rdi movq %rax, (0*8)(%rdi) /* user RAX */ movq (1*8)(%rsp), %rax /* user RIP */ @@ -834,7 +846,6 @@ native_irq_return_ldt: /* Now RAX == RSP. */ andl $0xffff0000, %eax /* RAX = (RSP & 0xffff0000) */ - popq %rdi /* Restore user RDI */ /* * espfix_stack[31:16] == 0. The page tables are set up such that @@ -845,7 +856,11 @@ native_irq_return_ldt: * still points to an RO alias of the ESPFIX stack. */ orq PER_CPU_VAR(espfix_stack), %rax - SWAPGS + + SWITCH_TO_USER_CR3 scratch_reg=%rdi /* to user CR3 */ + SWAPGS /* to user GS */ + popq %rdi /* Restore user RDI */ + movq %rax, %rsp UNWIND_HINT_IRET_REGS offset=8 @@ -945,6 +960,8 @@ ENTRY(switch_to_thread_stack) UNWIND_HINT_FUNC pushq %rdi + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi movq %rsp, %rdi movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI @@ -1244,7 +1261,11 @@ ENTRY(paranoid_entry) js 1f /* negative -> in kernel */ SWAPGS xorl %ebx, %ebx -1: ret + +1: + SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14 + + ret END(paranoid_entry) /* @@ -1266,6 +1287,7 @@ ENTRY(paranoid_exit) testl %ebx, %ebx /* swapgs needed? */ jnz .Lparanoid_exit_no_swapgs TRACE_IRQS_IRETQ + RESTORE_CR3 save_reg=%r14 SWAPGS_UNSAFE_STACK jmp .Lparanoid_exit_restore .Lparanoid_exit_no_swapgs: @@ -1293,6 +1315,8 @@ ENTRY(error_entry) * from user mode due to an IRET fault. */ SWAPGS + /* We have user CR3. Change to kernel CR3. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax .Lerror_entry_from_usermode_after_swapgs: /* Put us onto the real thread stack. */ @@ -1339,6 +1363,7 @@ ENTRY(error_entry) * .Lgs_change's error handler with kernel gsbase. */ SWAPGS + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax jmp .Lerror_entry_done .Lbstep_iret: @@ -1348,10 +1373,11 @@ ENTRY(error_entry) .Lerror_bad_iret: /* - * We came from an IRET to user mode, so we have user gsbase. - * Switch to kernel gsbase: + * We came from an IRET to user mode, so we have user + * gsbase and CR3. Switch to kernel gsbase and CR3: */ SWAPGS + SWITCH_TO_KERNEL_CR3 scratch_reg=%rax /* * Pretend that the exception came from user mode: set up pt_regs @@ -1383,6 +1409,10 @@ END(error_exit) /* * Runs on exception stack. Xen PV does not go through this path at all, * so we can use real assembly here. + * + * Registers: + * %r14: Used to save/restore the CR3 of the interrupted context + * when PAGE_TABLE_ISOLATION is in use. Do not clobber. */ ENTRY(nmi) UNWIND_HINT_IRET_REGS @@ -1446,6 +1476,7 @@ ENTRY(nmi) swapgs cld + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx movq %rsp, %rdx movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp UNWIND_HINT_IRET_REGS base=%rdx offset=8 @@ -1698,6 +1729,8 @@ end_repeat_nmi: movq $-1, %rsi call do_nmi + RESTORE_CR3 save_reg=%r14 + testl %ebx, %ebx /* swapgs needed? */ jnz nmi_restore nmi_swapgs: diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S index 95ad40eb7eff..05238b29895e 100644 --- a/arch/x86/entry/entry_64_compat.S +++ b/arch/x86/entry/entry_64_compat.S @@ -49,6 +49,10 @@ ENTRY(entry_SYSENTER_compat) /* Interrupts are off on entry. */ SWAPGS + + /* We are about to clobber %rsp anyway, clobbering here is OK */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp /* @@ -216,6 +220,12 @@ GLOBAL(entry_SYSCALL_compat_after_hwframe) pushq $0 /* pt_regs->r15 = 0 */ /* + * We just saved %rdi so it is safe to clobber. It is not + * preserved during the C calls inside TRACE_IRQS_OFF anyway. + */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + + /* * User mode is traced as though IRQs are on, and SYSENTER * turned them off. */ @@ -256,10 +266,22 @@ sysret32_from_system_call: * when the system call started, which is already known to user * code. We zero R8-R10 to avoid info leaks. */ + movq RSP-ORIG_RAX(%rsp), %rsp + + /* + * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored + * on the process stack which is not mapped to userspace and + * not readable after we SWITCH_TO_USER_CR3. Delay the CR3 + * switch until after after the last reference to the process + * stack. + * + * %r8 is zeroed before the sysret, thus safe to clobber. + */ + SWITCH_TO_USER_CR3 scratch_reg=%r8 + xorq %r8, %r8 xorq %r9, %r9 xorq %r10, %r10 - movq RSP-ORIG_RAX(%rsp), %rsp swapgs sysretl END(entry_SYSCALL_compat) |