summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/mach-se/7724/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-se/7724/setup.c')
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c26
1 files changed, 13 insertions, 13 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index cbfba783ee49..242dc843f574 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -256,12 +256,12 @@ static struct platform_device ceu1_device = {
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void)
int t = 10000;
while (t--) {
- if (!ctrl_inw(EEPROM_STAT))
+ if (!__raw_readw(EEPROM_STAT))
return 1;
cpu_relax();
}
@@ -542,13 +542,13 @@ static void __init sh_eth_init(void)
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
- ctrl_outw(0x0, EEPROM_OP); /* read */
- ctrl_outw(i*2, EEPROM_ADR);
- ctrl_outw(0x1, EEPROM_STRT);
+ __raw_writew(0x0, EEPROM_OP); /* read */
+ __raw_writew(i*2, EEPROM_ADR);
+ __raw_writew(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
- mac = ctrl_inw(EEPROM_DATA);
+ mac = __raw_readw(EEPROM_DATA);
sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
@@ -585,7 +585,7 @@ arch_initcall(arch_setup);
static int __init devices_setup(void)
{
- u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+ u16 sw = __raw_readw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
/* register board specific self-refresh code */
@@ -595,7 +595,7 @@ static int __init devices_setup(void)
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
/* Reset Release */
- ctrl_outw(ctrl_inw(FPGA_OUT) &
+ __raw_writew(__raw_readw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 7) | /* AK4643 */
@@ -604,7 +604,7 @@ static int __init devices_setup(void)
FPGA_OUT);
/* turn on USB clocks, use external clock */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
#ifdef CONFIG_PM
/* Let LED9 show STATUS2 */
@@ -633,10 +633,10 @@ static int __init devices_setup(void)
#endif
/* enable USB0 port */
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
/* enable USB1 port */
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@@ -684,7 +684,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);