diff options
Diffstat (limited to 'arch/powerpc/kernel')
55 files changed, 2715 insertions, 2159 deletions
diff --git a/arch/powerpc/kernel/.gitignore b/arch/powerpc/kernel/.gitignore index c5f676c3c224..67ebd3003c05 100644 --- a/arch/powerpc/kernel/.gitignore +++ b/arch/powerpc/kernel/.gitignore @@ -1 +1,2 @@ +prom_init_check vmlinux.lds diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 56dfa7a2a6f2..a7ca8fe62368 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -52,7 +52,7 @@ obj-y := cputable.o ptrace.o syscalls.o \ of_platform.o prom_parse.o obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ - paca.o nvram_64.o firmware.o + paca.o nvram_64.o firmware.o note.o obj-$(CONFIG_VDSO32) += vdso32/ obj-$(CONFIG_PPC_WATCHDOG) += watchdog.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o @@ -78,7 +78,9 @@ obj-$(CONFIG_EEH) += eeh.o eeh_pe.o eeh_dev.o eeh_cache.o \ eeh_driver.o eeh_event.o eeh_sysfs.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o -obj-$(CONFIG_FA_DUMP) += fadump.o +ifneq ($(CONFIG_FA_DUMP)$(CONFIG_PRESERVE_FA_DUMP),) +obj-y += fadump.o +endif ifdef CONFIG_PPC32 obj-$(CONFIG_E500) += idle_e500.o endif @@ -155,6 +157,9 @@ endif obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o +ifneq ($(CONFIG_PPC_POWERNV)$(CONFIG_PPC_SVM),) +obj-y += ucall.o +endif # Disable GCOV, KCOV & sanitizers in odd or sensitive code GCOV_PROFILE_prom_init.o := n @@ -184,15 +189,13 @@ extra-$(CONFIG_ALTIVEC) += vector.o extra-$(CONFIG_PPC64) += entry_64.o extra-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o -ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE -$(obj)/built-in.a: prom_init_check +extra-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init_check -quiet_cmd_prom_init_check = CALL $< - cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o" +quiet_cmd_prom_init_check = PROMCHK $@ + cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" $(obj)/prom_init.o; touch $@ -PHONY += prom_init_check -prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o - $(call cmd,prom_init_check) -endif +$(obj)/prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o FORCE + $(call if_changed,prom_init_check) +targets += prom_init_check clean-files := vmlinux.lds diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4ccb6b3a7fbd..484f54dab247 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -506,6 +506,7 @@ int main(void) OFFSET(KVM_VRMA_SLB_V, kvm, arch.vrma_slb_v); OFFSET(KVM_RADIX, kvm, arch.radix); OFFSET(KVM_FWNMI, kvm, arch.fwnmi_enabled); + OFFSET(KVM_SECURE_GUEST, kvm, arch.secure_guest); OFFSET(VCPU_DSISR, kvm_vcpu, arch.shregs.dsisr); OFFSET(VCPU_DAR, kvm_vcpu, arch.shregs.dar); OFFSET(VCPU_VPA, kvm_vcpu, arch.vpa.pinned_addr); diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index bfe5f4a2886b..e745abc5457a 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -569,7 +569,7 @@ static struct cpu_spec __initdata cpu_specs[] = { #endif /* CONFIG_PPC_BOOK3S_64 */ #ifdef CONFIG_PPC32 -#ifdef CONFIG_PPC_BOOK3S_32 +#ifdef CONFIG_PPC_BOOK3S_601 { /* 601 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00010000, @@ -583,6 +583,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "ppc601", }, +#endif /* CONFIG_PPC_BOOK3S_601 */ +#ifdef CONFIG_PPC_BOOK3S_6xx { /* 603 */ .pvr_mask = 0xffff0000, .pvr_value = 0x00030000, @@ -1212,7 +1214,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "ppc603", }, -#endif /* CONFIG_PPC_BOOK3S_32 */ +#endif /* CONFIG_PPC_BOOK3S_6xx */ #ifdef CONFIG_PPC_8xx { /* 8xx */ .pvr_mask = 0xffff0000, diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2f5a53874f6d..e486d1d78de2 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -122,18 +122,17 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask) { struct iommu_table *tbl = get_iommu_table_base(dev); - if (!tbl) { - dev_info(dev, "Warning: IOMMU dma not supported: mask 0x%08llx" - ", table unavailable\n", mask); - return 0; - } - if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) { dev->archdata.iommu_bypass = true; dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n"); return 1; } + if (!tbl) { + dev_err(dev, "Warning: IOMMU dma not supported: mask 0x%08llx, table unavailable\n", mask); + return 0; + } + if (tbl->it_offset > (mask >> tbl->it_page_shift)) { dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index c0e4b73191f3..0a91dee51245 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -150,6 +150,16 @@ static int __init eeh_setup(char *str) } __setup("eeh=", eeh_setup); +void eeh_show_enabled(void) +{ + if (eeh_has_flag(EEH_FORCE_DISABLED)) + pr_info("EEH: Recovery disabled by kernel parameter.\n"); + else if (eeh_has_flag(EEH_ENABLED)) + pr_info("EEH: Capable adapter found: recovery enabled.\n"); + else + pr_info("EEH: No capable adapters found: recovery disabled.\n"); +} + /* * This routine captures assorted PCI configuration space data * for the indicated PCI device, and puts them into a buffer @@ -410,11 +420,9 @@ static int eeh_phb_check_failure(struct eeh_pe *pe) eeh_pe_mark_isolated(phb_pe); eeh_serialize_unlock(flags); - pr_err("EEH: PHB#%x failure detected, location: %s\n", + pr_debug("EEH: PHB#%x failure detected, location: %s\n", phb_pe->phb->global_number, eeh_pe_loc_get(phb_pe)); - dump_stack(); eeh_send_failure_event(phb_pe); - return 1; out: eeh_serialize_unlock(flags); @@ -441,7 +449,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev) unsigned long flags; struct device_node *dn; struct pci_dev *dev; - struct eeh_pe *pe, *parent_pe, *phb_pe; + struct eeh_pe *pe, *parent_pe; int rc = 0; const char *location = NULL; @@ -460,8 +468,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev) /* Access to IO BARs might get this far and still not want checking. */ if (!pe) { eeh_stats.ignored_check++; - pr_debug("EEH: Ignored check for %s\n", - eeh_pci_name(dev)); + eeh_edev_dbg(edev, "Ignored check\n"); return 0; } @@ -501,12 +508,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev) if (dn) location = of_get_property(dn, "ibm,loc-code", NULL); - printk(KERN_ERR "EEH: %d reads ignored for recovering device at " - "location=%s driver=%s pci addr=%s\n", + eeh_edev_err(edev, "%d reads ignored for recovering device at location=%s driver=%s\n", pe->check_count, location ? location : "unknown", - eeh_driver_name(dev), eeh_pci_name(dev)); - printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n", + eeh_driver_name(dev)); + eeh_edev_err(edev, "Might be infinite loop in %s driver\n", eeh_driver_name(dev)); dump_stack(); } @@ -573,13 +579,8 @@ int eeh_dev_check_failure(struct eeh_dev *edev) * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ - phb_pe = eeh_phb_pe_get(pe->phb); - pr_err("EEH: Frozen PHB#%x-PE#%x detected\n", - pe->phb->global_number, pe->addr); - pr_err("EEH: PE location: %s, PHB location: %s\n", - eeh_pe_loc_get(pe), eeh_pe_loc_get(phb_pe)); - dump_stack(); - + pr_debug("EEH: %s: Frozen PHB#%x-PE#%x detected\n", + __func__, pe->phb->global_number, pe->addr); eeh_send_failure_event(pe); return 1; @@ -697,7 +698,7 @@ int eeh_pci_enable(struct eeh_pe *pe, int function) return rc; } -static void *eeh_disable_and_save_dev_state(struct eeh_dev *edev, +static void eeh_disable_and_save_dev_state(struct eeh_dev *edev, void *userdata) { struct pci_dev *pdev = eeh_dev_to_pci_dev(edev); @@ -708,7 +709,7 @@ static void *eeh_disable_and_save_dev_state(struct eeh_dev *edev, * state for the specified device */ if (!pdev || pdev == dev) - return NULL; + return; /* Ensure we have D0 power state */ pci_set_power_state(pdev, PCI_D0); @@ -721,18 +722,16 @@ static void *eeh_disable_and_save_dev_state(struct eeh_dev *edev, * interrupt from the device */ pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); - - return NULL; } -static void *eeh_restore_dev_state(struct eeh_dev *edev, void *userdata) +static void eeh_restore_dev_state(struct eeh_dev *edev, void *userdata) { struct pci_dn *pdn = eeh_dev_to_pdn(edev); struct pci_dev *pdev = eeh_dev_to_pci_dev(edev); struct pci_dev *dev = userdata; if (!pdev) - return NULL; + return; /* Apply customization from firmware */ if (pdn && eeh_ops->restore_config) @@ -741,8 +740,6 @@ static void *eeh_restore_dev_state(struct eeh_dev *edev, void *userdata) /* The caller should restore state for the specified device */ if (pdev != dev) pci_restore_state(pdev); - - return NULL; } int eeh_restore_vf_config(struct pci_dn *pdn) @@ -868,7 +865,7 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat * the indicated device and its children so that the bunch of the * devices could be reset properly. */ -static void *eeh_set_dev_freset(struct eeh_dev *edev, void *flag) +static void eeh_set_dev_freset(struct eeh_dev *edev, void *flag) { struct pci_dev *dev; unsigned int *freset = (unsigned int *)flag; @@ -876,8 +873,6 @@ static void *eeh_set_dev_freset(struct eeh_dev *edev, void *flag) dev = eeh_dev_to_pci_dev(edev); if (dev) *freset |= dev->needs_freset; - - return NULL; } static void eeh_pe_refreeze_passed(struct eeh_pe *root) @@ -1063,23 +1058,6 @@ static struct notifier_block eeh_reboot_nb = { .notifier_call = eeh_reboot_notifier, }; -void eeh_probe_devices(void) -{ - struct pci_controller *hose, *tmp; - struct pci_dn *pdn; - - /* Enable EEH for all adapters */ - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - pdn = hose->pci_data; - traverse_pci_dn(pdn, eeh_ops->probe, NULL); - } - if (eeh_enabled()) - pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n"); - else - pr_info("EEH: No capable adapters found\n"); - -} - /** * eeh_init - EEH initialization * @@ -1120,6 +1098,8 @@ static int eeh_init(void) list_for_each_entry_safe(hose, tmp, &hose_list, list_node) eeh_dev_phb_init_dynamic(hose); + eeh_addr_cache_init(); + /* Initialize EEH event */ return eeh_event_init(); } @@ -1190,15 +1170,14 @@ void eeh_add_device_late(struct pci_dev *dev) struct pci_dn *pdn; struct eeh_dev *edev; - if (!dev || !eeh_enabled()) + if (!dev) return; - pr_debug("EEH: Adding device %s\n", pci_name(dev)); - pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn); edev = pdn_to_eeh_dev(pdn); + eeh_edev_dbg(edev, "Adding device\n"); if (edev->pdev == dev) { - pr_debug("EEH: Already referenced !\n"); + eeh_edev_dbg(edev, "Device already referenced!\n"); return; } @@ -1246,6 +1225,8 @@ void eeh_add_device_tree_late(struct pci_bus *bus) { struct pci_dev *dev; + if (eeh_has_flag(EEH_FORCE_DISABLED)) + return; list_for_each_entry(dev, &bus->devices, bus_list) { eeh_add_device_late(dev); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { @@ -1299,10 +1280,10 @@ void eeh_remove_device(struct pci_dev *dev) edev = pci_dev_to_eeh_dev(dev); /* Unregister the device with the EEH/PCI address search system */ - pr_debug("EEH: Removing device %s\n", pci_name(dev)); + dev_dbg(&dev->dev, "EEH: Removing device\n"); if (!edev || !edev->pdev || !edev->pe) { - pr_debug("EEH: Not referenced !\n"); + dev_dbg(&dev->dev, "EEH: Device not referenced!\n"); return; } @@ -1890,6 +1871,198 @@ static const struct file_operations eeh_force_recover_fops = { .llseek = no_llseek, .write = eeh_force_recover_write, }; + +static ssize_t eeh_debugfs_dev_usage(struct file *filp, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + static const char usage[] = "input format: <domain>:<bus>:<dev>.<fn>\n"; + + return simple_read_from_buffer(user_buf, count, ppos, + usage, sizeof(usage) - 1); +} + +static ssize_t eeh_dev_check_write(struct file *filp, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + uint32_t domain, bus, dev, fn; + struct pci_dev *pdev; + struct eeh_dev *edev; + char buf[20]; + int ret; + + memset(buf, 0, sizeof(buf)); + ret = simple_write_to_buffer(buf, sizeof(buf)-1, ppos, user_buf, count); + if (!ret) + return -EFAULT; + + ret = sscanf(buf, "%x:%x:%x.%x", &domain, &bus, &dev, &fn); + if (ret != 4) { + pr_err("%s: expected 4 args, got %d\n", __func__, ret); + return -EINVAL; + } + + pdev = pci_get_domain_bus_and_slot(domain, bus, (dev << 3) | fn); + if (!pdev) + return -ENODEV; + + edev = pci_dev_to_eeh_dev(pdev); + if (!edev) { + pci_err(pdev, "No eeh_dev for this device!\n"); + pci_dev_put(pdev); + return -ENODEV; + } + + ret = eeh_dev_check_failure(edev); + pci_info(pdev, "eeh_dev_check_failure(%04x:%02x:%02x.%01x) = %d\n", + domain, bus, dev, fn, ret); + + pci_dev_put(pdev); + + return count; +} + +static const struct file_operations eeh_dev_check_fops = { + .open = simple_open, + .llseek = no_llseek, + .write = eeh_dev_check_write, + .read = eeh_debugfs_dev_usage, +}; + +static int eeh_debugfs_break_device(struct pci_dev *pdev) +{ + struct resource *bar = NULL; + void __iomem *mapped; + u16 old, bit; + int i, pos; + + /* Do we have an MMIO BAR to disable? */ + for (i = 0; i <= PCI_STD_RESOURCE_END; i++) { + struct resource *r = &pdev->resource[i]; + + if (!r->flags || !r->start) + continue; + if (r->flags & IORESOURCE_IO) + continue; + if (r->flags & IORESOURCE_UNSET) + continue; + + bar = r; + break; + } + + if (!bar) { + pci_err(pdev, "Unable to find Memory BAR to cause EEH with\n"); + return -ENXIO; + } + + pci_err(pdev, "Going to break: %pR\n", bar); + + if (pdev->is_virtfn) { +#ifndef CONFIG_IOV + return -ENXIO; +#else + /* + * VFs don't have a per-function COMMAND register, so the best + * we can do is clear the Memory Space Enable bit in the PF's + * SRIOV control reg. + * + * Unfortunately, this requires that we have a PF (i.e doesn't + * work for a passed-through VF) and it has the potential side + * effect of also causing an EEH on every other VF under the + * PF. Oh well. + */ + pdev = pdev->physfn; + if (!pdev) + return -ENXIO; /* passed through VFs have no PF */ + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); + pos += PCI_SRIOV_CTRL; + bit = PCI_SRIOV_CTRL_MSE; +#endif /* !CONFIG_IOV */ + } else { + bit = PCI_COMMAND_MEMORY; + pos = PCI_COMMAND; + } + + /* + * Process here is: + * + * 1. Disable Memory space. + * + * 2. Perform an MMIO to the device. This should result in an error + * (CA / UR) being raised by the device which results in an EEH + * PE freeze. Using the in_8() accessor skips the eeh detection hook + * so the freeze hook so the EEH Detection machinery won't be + * triggered here. This is to match the usual behaviour of EEH + * where the HW will asyncronously freeze a PE and it's up to + * the kernel to notice and deal with it. + * + * 3. Turn Memory space back on. This is more important for VFs + * since recovery will probably fail if we don't. For normal + * the COMMAND register is reset as a part of re-initialising + * the device. + * + * Breaking stuff is the point so who cares if it's racy ;) + */ + pci_read_config_word(pdev, pos, &old); + + mapped = ioremap(bar->start, PAGE_SIZE); + if (!mapped) { + pci_err(pdev, "Unable to map MMIO BAR %pR\n", bar); + return -ENXIO; + } + + pci_write_config_word(pdev, pos, old & ~bit); + in_8(mapped); + pci_write_config_word(pdev, pos, old); + + iounmap(mapped); + + return 0; +} + +static ssize_t eeh_dev_break_write(struct file *filp, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + uint32_t domain, bus, dev, fn; + struct pci_dev *pdev; + char buf[20]; + int ret; + + memset(buf, 0, sizeof(buf)); + ret = simple_write_to_buffer(buf, sizeof(buf)-1, ppos, user_buf, count); + if (!ret) + return -EFAULT; + + ret = sscanf(buf, "%x:%x:%x.%x", &domain, &bus, &dev, &fn); + if (ret != 4) { + pr_err("%s: expected 4 args, got %d\n", __func__, ret); + return -EINVAL; + } + + pdev = pci_get_domain_bus_and_slot(domain, bus, (dev << 3) | fn); + if (!pdev) + return -ENODEV; + + ret = eeh_debugfs_break_device(pdev); + pci_dev_put(pdev); + + if (ret < 0) + return ret; + + return count; +} + +static const struct file_operations eeh_dev_break_fops = { + .open = simple_open, + .llseek = no_llseek, + .write = eeh_dev_break_write, + .read = eeh_debugfs_dev_usage, +}; + #endif static int __init eeh_init_proc(void) @@ -1905,6 +2078,12 @@ static int __init eeh_init_proc(void) debugfs_create_bool("eeh_disable_recovery", 0600, powerpc_debugfs_root, &eeh_debugfs_no_recover); + debugfs_create_file_unsafe("eeh_dev_check", 0600, + powerpc_debugfs_root, NULL, + &eeh_dev_check_fops); + debugfs_create_file_unsafe("eeh_dev_break", 0600, + powerpc_debugfs_root, NULL, + &eeh_dev_break_fops); debugfs_create_file_unsafe("eeh_force_recover", 0600, powerpc_debugfs_root, NULL, &eeh_force_recover_fops); diff --git a/arch/powerpc/kernel/eeh_cache.c b/arch/powerpc/kernel/eeh_cache.c index 05ffd32b3416..cf11277ebd02 100644 --- a/arch/powerpc/kernel/eeh_cache.c +++ b/arch/powerpc/kernel/eeh_cache.c @@ -148,8 +148,8 @@ eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo, piar->pcidev = dev; piar->flags = flags; - pr_debug("PIAR: insert range=[%pap:%pap] dev=%s\n", - &alo, &ahi, pci_name(dev)); + eeh_edev_dbg(piar->edev, "PIAR: insert range=[%pap:%pap]\n", + &alo, &ahi); rb_link_node(&piar->rb_node, parent, p); rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); @@ -229,8 +229,8 @@ restart: piar = rb_entry(n, struct pci_io_addr_range, rb_node); if (piar->pcidev == dev) { - pr_debug("PIAR: remove range=[%pap:%pap] dev=%s\n", - &piar->addr_lo, &piar->addr_hi, pci_name(dev)); + eeh_edev_dbg(piar->edev, "PIAR: remove range=[%pap:%pap]\n", + &piar->addr_lo, &piar->addr_hi); rb_erase(n, &pci_io_addr_cache_root.rb_root); kfree(piar); goto restart; @@ -258,37 +258,14 @@ void eeh_addr_cache_rmv_dev(struct pci_dev *dev) } /** - * eeh_addr_cache_build - Build a cache of I/O addresses + * eeh_addr_cache_init - Initialize a cache of I/O addresses * - * Build a cache of pci i/o addresses. This cache will be used to + * Initialize a cache of pci i/o addresses. This cache will be used to * find the pci device that corresponds to a given address. - * This routine scans all pci busses to build the cache. - * Must be run late in boot process, after the pci controllers - * have been scanned for devices (after all device resources are known). */ -void eeh_addr_cache_build(void) +void eeh_addr_cache_init(void) { - struct pci_dn *pdn; - struct eeh_dev *edev; - struct pci_dev *dev = NULL; - spin_lock_init(&pci_io_addr_cache_root.piar_lock); - - for_each_pci_dev(dev) { - pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn); - if (!pdn) - continue; - - edev = pdn_to_eeh_dev(pdn); - if (!edev) - continue; - - dev->dev.archdata.edev = edev; - edev->pdev = dev; - - eeh_addr_cache_insert_dev(dev); - eeh_sysfs_add_device(dev); - } } static int eeh_addr_cache_show(struct seq_file *s, void *v) diff --git a/arch/powerpc/kernel/eeh_dev.c b/arch/powerpc/kernel/eeh_dev.c index c4317c452d98..7370185c7a05 100644 --- a/arch/powerpc/kernel/eeh_dev.c +++ b/arch/powerpc/kernel/eeh_dev.c @@ -47,6 +47,8 @@ struct eeh_dev *eeh_dev_init(struct pci_dn *pdn) /* Associate EEH device with OF node */ pdn->edev = edev; edev->pdn = pdn; + edev->bdfn = (pdn->busno << 8) | pdn->devfn; + edev->controller = pdn->phb; return edev; } diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 89623962c727..d9279d0ee9f5 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -27,6 +27,7 @@ #include <linux/irq.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> #include <asm/eeh.h> #include <asm/eeh_event.h> #include <asm/ppc-pci.h> @@ -81,23 +82,6 @@ static const char *pci_ers_result_name(enum pci_ers_result result) } }; -static __printf(2, 3) void eeh_edev_info(const struct eeh_dev *edev, - const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - - vaf.fmt = fmt; - vaf.va = &args; - |