summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include/asm/hvcall.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/include/asm/hvcall.h')
-rw-r--r--arch/powerpc/include/asm/hvcall.h296
1 files changed, 296 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
new file mode 100644
index 000000000000..fbe2932fa9e9
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -0,0 +1,296 @@
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+#ifdef __KERNEL__
+
+#define HVSC .long 0x44000022
+
+#define H_SUCCESS 0
+#define H_BUSY 1 /* Hardware busy -- retry later */
+#define H_CLOSED 2 /* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
+#define H_PARTIAL 5
+#define H_IN_PROGRESS 14 /* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE 16
+#define H_PENDING 17 /* returned from H_POLL_PENDING */
+#define H_CONTINUE 18 /* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
+ is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
+ is a good time to retry */
+#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
+#define H_HARDWARE -1 /* Hardware error */
+#define H_FUNCTION -2 /* Function not supported */
+#define H_PRIVILEGE -3 /* Caller not privileged */
+#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE -5 /* Illegal msr value */
+#define H_PTEG_FULL -6 /* PTEG is full */
+#define H_NOT_FOUND -7 /* PTE was not found" */
+#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM -9
+#define H_AUTHORITY -10
+#define H_PERMISSION -11
+#define H_DROPPED -12
+#define H_SOURCE_PARM -13
+#define H_DEST_PARM -14
+#define H_REMOTE_PARM -15
+#define H_RESOURCE -16
+#define H_ADAPTER_PARM -17
+#define H_RH_PARM -18
+#define H_RCQ_PARM -19
+#define H_SCQ_PARM -20
+#define H_EQ_PARM -21
+#define H_RT_PARM -22
+#define H_ST_PARM -23
+#define H_SIGT_PARM -24
+#define H_TOKEN_PARM -25
+#define H_MLENGTH_PARM -27
+#define H_MEM_PARM -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM -30
+#define H_PORT_PARM -31
+#define H_MCG_PARM -32
+#define H_VL_PARM -33
+#define H_TSIZE_PARM -34
+#define H_TRACE_PARM -35
+
+#define H_MASK_PARM -37
+#define H_MCG_FULL -38
+#define H_ALIAS_EXIST -39
+#define H_P_COUNTER -40
+#define H_TABLE_FULL -41
+#define H_ALT_TABLE -42
+#define H_MR_CONDITION -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE -45
+#define H_RESCINDEND -46
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later. This prevents calls blocking in the
+ * firmware for long periods of time. Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying. If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
+ && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE (1UL<<(63-16))
+#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE (1UL<<(63-28))
+#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
+#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */
+#define H_ANDCOND (1UL<<(63-33))
+#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE (1UL<<(63-49))
+#define H_N (1UL<<(63-61))
+#define H_PP1 (1UL<<(63-62))
+#define H_PP2 (1UL<<(63-63))
+
+/* VASI States */
+#define H_VASI_INVALID 0
+#define H_VASI_ENABLED 1
+#define H_VASI_ABORTED 2
+#define H_VASI_SUSPENDING 3
+#define H_VASI_SUSPENDED 4
+#define H_VASI_RESUMED 5
+#define H_VASI_COMPLETED 6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR (1UL<<(63-61))
+#define H_DABRX_KERNEL (1UL<<(63-62))
+#define H_DABRX_USER (1UL<<(63-63))
+
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT 4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE 0x04
+#define H_ENTER 0x08
+#define H_READ 0x0c
+#define H_CLEAR_MOD 0x10
+#define H_CLEAR_REF 0x14
+#define H_PROTECT 0x18
+#define H_GET_TCE 0x1c
+#define H_PUT_TCE 0x20
+#define H_SET_SPRG0 0x24
+#define H_SET_DABR 0x28
+#define H_PAGE_INIT 0x2c
+#define H_SET_ASR 0x30
+#define H_ASR_ON 0x34
+#define H_ASR_OFF 0x38
+#define H_LOGICAL_CI_LOAD 0x3c
+#define H_LOGICAL_CI_STORE 0x40
+#define H_LOGICAL_CACHE_LOAD 0x44
+#define H_LOGICAL_CACHE_STORE 0x48
+#define H_LOGICAL_ICBI 0x4c
+#define H_LOGICAL_DCBF 0x50
+#define H_GET_TERM_CHAR 0x54
+#define H_PUT_TERM_CHAR 0x58
+#define H_REAL_TO_LOGICAL 0x5c
+#define H_HYPERVISOR_DATA 0x60
+#define H_EOI 0x64
+#define H_CPPR 0x68
+#define H_IPI 0x6c
+#define H_IPOLL 0x70
+#define H_XIRR 0x74
+#define H_PERFMON 0x7c
+#define H_MIGRATE_DMA 0x78
+#define H_REGISTER_VPA 0xDC
+#define H_CEDE 0xE0
+#define H_CONFER 0xE4
+#define H_PROD 0xE8
+#define H_GET_PPP 0xEC
+#define H_SET_PPP 0xF0
+#define H_PURR 0xF4
+#define H_PIC 0xF8
+#define H_REG_CRQ 0xFC
+#define H_FREE_CRQ 0x100
+#define H_VIO_SIGNAL 0x104
+#define H_SEND_CRQ 0x108
+#define H_COPY_RDMA 0x110
+#define H_REGISTER_LOGICAL_LAN 0x114
+#define H_FREE_LOGICAL_LAN 0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN 0x120
+#define H_BULK_REMOVE 0x124
+#define H_MULTICAST_CTRL 0x130
+#define H_SET_XDABR 0x134
+#define H_STUFF_TCE 0x138
+#define H_PUT_TCE_INDIRECT 0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO 0x150
+#define H_REGISTER_VTERM 0x154
+#define H_FREE_VTERM 0x158
+#define H_RESET_EVENTS 0x15C
+#define H_ALLOC_RESOURCE 0x160
+#define H_FREE_RESOURCE 0x164
+#define H_MODIFY_QP 0x168
+#define H_QUERY_QP 0x16C
+#define H_REREGISTER_PMR 0x170
+#define H_REGISTER_SMR 0x174
+#define H_QUERY_MR 0x178
+#define H_QUERY_MW 0x17C
+#define H_QUERY_HCA 0x180
+#define H_QUERY_PORT 0x184
+#define H_MODIFY_PORT 0x188
+#define H_DEFINE_AQP1 0x18C
+#define H_GET_TRACE_BUFFER 0x190
+#define H_DEFINE_AQP0 0x194
+#define H_RESIZE_MR 0x198
+#define H_ATTACH_MCQP 0x19C
+#define H_DETACH_MCQP 0x1A0
+#define H_CREATE_RPT 0x1A4
+#define H_REMOVE_RPT 0x1A8
+#define H_REGISTER_RPAGES 0x1AC
+#define H_DISABLE_AND_GETC 0x1B0
+#define H_ERROR_DATA 0x1B4
+#define H_GET_HCA_INFO 0x1B8
+#define H_GET_PERF_COUNT 0x1BC
+#define H_MANAGE_TRACE 0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE 0x1E4
+#define H_POLL_PENDING 0x1D8
+#define H_ILLAN_ATTRIBUTES 0x244
+#define H_JOIN 0x298
+#define H_VASI_STATE 0x2A4
+#define H_ENABLE_CRQ 0x2B0
+#define H_SET_MPP 0x2D0
+#define H_GET_MPP 0x2D4
+#define MAX_HCALL_OPCODE H_GET_MPP
+
+#ifndef __ASSEMBLY__
+
+/**
+ * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
+ * @opcode: The hypervisor call to make.
+ *
+ * This call supports up to 7 arguments and only returns the status of
+ * the hcall. Use this version where possible, its slightly faster than
+ * the other plpar_hcalls.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/**
+ * plpar_hcall: - Make a pseries hypervisor call
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
+ */
+#define PLPAR_HCALL_BUFSIZE 4
+long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used when phyp interface needs to be called in real mode. Similar to
+ * plpar_hcall, but plpar_hcall_raw works in real mode and does not
+ * calculate hypervisor call statistics.
+ */
+long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 9 return arguments in.
+ *
+ * This call supports up to 9 arguments and 9 return arguments. Use
+ * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
+ */
+#define PLPAR_HCALL9_BUFSIZE 9
+long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+
+/* For hcall instrumentation. One structure per-hcall, per-CPU */
+struct hcall_stats {
+ unsigned long num_calls; /* number of calls (on this CPU) */
+ unsigned long tb_total; /* total wall time (mftb) of calls. */
+ unsigned long purr_total; /* total cpu time (PURR) of calls. */
+};
+#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1)
+
+struct hvcall_mpp_data {
+ unsigned long entitled_mem;
+ unsigned long mapped_mem;
+ unsigned short group_num;
+ unsigned short pool_num;
+ unsigned char mem_weight;
+ unsigned char unallocated_mem_weight;
+ unsigned long unallocated_entitlement; /* value in bytes */
+ unsigned long pool_size;
+ signed long loan_request;
+ unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HVCALL_H */