summaryrefslogtreecommitdiffstats
path: root/arch/mn10300/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mn10300/kernel/head.S')
-rw-r--r--arch/mn10300/kernel/head.S196
1 files changed, 195 insertions, 1 deletions
diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S
index a81e34fba651..73e00fc78072 100644
--- a/arch/mn10300/kernel/head.S
+++ b/arch/mn10300/kernel/head.S
@@ -19,6 +19,12 @@
#include <asm/frame.inc>
#include <asm/param.h>
#include <unit/serial.h>
+#ifdef CONFIG_SMP
+#include <asm/smp.h>
+#include <asm/intctl-regs.h>
+#include <asm/cpu-regs.h>
+#include <proc/smp-regs.h>
+#endif /* CONFIG_SMP */
__HEAD
@@ -30,17 +36,51 @@
.globl _start
.type _start,@function
_start:
+#ifdef CONFIG_SMP
+ #
+ # If this is a secondary CPU (AP), then deal with that elsewhere
+ #
+ mov (CPUID),d3
+ and CPUID_MASK,d3
+ bne startup_secondary
+
+ #
+ # We're dealing with the primary CPU (BP) here, then.
+ # Keep BP's D0,D1,D2 register for boot check.
+ #
+
+ # Set up the Boot IPI for each secondary CPU
+ mov 0x1,a0
+loop_set_secondary_icr:
+ mov a0,a1
+ asl CROSS_ICR_CPU_SHIFT,a1
+ add CROSS_GxICR(SMP_BOOT_IRQ,0),a1
+ movhu (a1),d3
+ or GxICR_ENABLE|GxICR_LEVEL_0,d3
+ movhu d3,(a1)
+ movhu (a1),d3 # flush
+ inc a0
+ cmp NR_CPUS,a0
+ bne loop_set_secondary_icr
+#endif /* CONFIG_SMP */
+
# save commandline pointer
mov d0,a3
# preload the PGD pointer register
mov swapper_pg_dir,d0
mov d0,(PTBR)
+ clr d0
+ movbu d0,(PIDR)
# turn on the TLBs
mov MMUCTR_IIV|MMUCTR_DIV,d0
mov d0,(MMUCTR)
+#ifdef CONFIG_AM34_2
+ mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0
+#else
mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
+#endif
mov d0,(MMUCTR)
# turn on AM33v2 exception handling mode and set the trap table base
@@ -51,6 +91,11 @@ _start:
mov d0,(TBR)
# invalidate and enable both of the caches
+#ifdef CONFIG_SMP
+ mov ECHCTR,a0
+ clr d0
+ mov d0,(a0)
+#endif
mov CHCTR,a0
clr d0
movhu d0,(a0) # turn off first
@@ -206,6 +251,44 @@ __no_parameters:
call processor_init[],0
call unit_init[],0
+#ifdef CONFIG_SMP
+ # mark the primary CPU in cpu_boot_map
+ mov cpu_boot_map,a0
+ mov 0x1,d0
+ mov d0,(a0)
+
+ # signal each secondary CPU to begin booting
+ mov 0x1,d2 # CPU ID
+
+loop_request_boot_secondary:
+ mov d2,a0
+ # send SMP_BOOT_IPI to secondary CPU
+ asl CROSS_ICR_CPU_SHIFT,a0
+ add CROSS_GxICR(SMP_BOOT_IRQ,0),a0
+ movhu (a0),d0
+ or GxICR_REQUEST|GxICR_DETECT,d0
+ movhu d0,(a0)
+ movhu (a0),d0 # flush
+
+ # wait up to 100ms for AP's IPI to be received
+ clr d3
+wait_on_secondary_boot:
+ mov DELAY_TIME_BOOT_IPI,d0
+ call __delay[],0
+ inc d3
+ mov cpu_boot_map,a0
+ mov (a0),d0
+ lsr d2,d0
+ btst 0x1,d0
+ bne 1f
+ cmp TIME_OUT_COUNT_BOOT_IPI,d3
+ bne wait_on_secondary_boot
+1:
+ inc d2
+ cmp NR_CPUS,d2
+ bne loop_request_boot_secondary
+#endif /* CONFIG_SMP */
+
#ifdef CONFIG_GDBSTUB
call gdbstub_init[],0
@@ -217,7 +300,118 @@ __gdbstub_pause:
#endif
jmp start_kernel
- .size _start, _start-.
+ .size _start,.-_start
+
+###############################################################################
+#
+# Secondary CPU boot point
+#
+###############################################################################
+#ifdef CONFIG_SMP
+startup_secondary:
+ # preload the PGD pointer register
+ mov swapper_pg_dir,d0
+ mov d0,(PTBR)
+ clr d0
+ movbu d0,(PIDR)
+
+ # turn on the TLBs
+ mov MMUCTR_IIV|MMUCTR_DIV,d0
+ mov d0,(MMUCTR)
+#ifdef CONFIG_AM34_2
+ mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE|MMUCTR_WTE,d0
+#else
+ mov MMUCTR_ITE|MMUCTR_DTE|MMUCTR_CE,d0
+#endif
+ mov d0,(MMUCTR)
+
+ # turn on AM33v2 exception handling mode and set the trap table base
+ movhu (CPUP),d0
+ or CPUP_EXM_AM33V2,d0
+ movhu d0,(CPUP)
+
+ # set the interrupt vector table
+ mov CONFIG_INTERRUPT_VECTOR_BASE,d0
+ mov d0,(TBR)
+
+ # invalidate and enable both of the caches
+ mov ECHCTR,a0
+ clr d0
+ mov d0,(a0)
+ mov CHCTR,a0
+ clr d0
+ movhu d0,(a0) # turn off first
+ mov CHCTR_ICINV|CHCTR_DCINV,d0
+ movhu d0,(a0)
+ setlb
+ mov (a0),d0
+ btst CHCTR_ICBUSY|CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer)
+ lne
+
+#ifdef CONFIG_MN10300_CACHE_ENABLED
+#ifdef CONFIG_MN10300_CACHE_WBACK
+#ifndef CONFIG_MN10300_CACHE_WBACK_NOWRALLOC
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK,d0
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRBACK|CHCTR_DCALMD,d0
+#endif /* !NOWRALLOC */
+#else
+ mov CHCTR_ICEN|CHCTR_DCEN|CHCTR_DCWTMD_WRTHROUGH,d0
+#endif /* WBACK */
+ movhu d0,(a0) # enable
+#endif /* ENABLED */
+
+ # Clear the boot IPI interrupt for this CPU
+ movhu (GxICR(SMP_BOOT_IRQ)),d0
+ and ~GxICR_REQUEST,d0
+ movhu d0,(GxICR(SMP_BOOT_IRQ))
+ movhu (GxICR(SMP_BOOT_IRQ)),d0 # flush
+
+ /* get stack */
+ mov CONFIG_INTERRUPT_VECTOR_BASE + CONFIG_BOOT_STACK_OFFSET,a0
+ mov (CPUID),d0
+ and CPUID_MASK,d0
+ mulu CONFIG_BOOT_STACK_SIZE,d0
+ sub d0,a0
+ mov a0,sp
+
+ # init interrupt for AP
+ call smp_prepare_cpu_init[],0
+
+ # mark this secondary CPU in cpu_boot_map
+ mov (CPUID),d0
+ mov 0x1,d1
+ asl d0,d1
+ mov cpu_boot_map,a0
+ bset d1,(a0)
+
+ or EPSW_IE|EPSW_IM_1,epsw # permit level 0 interrupts
+ nop
+ nop
+#ifdef CONFIG_MN10300_CACHE_WBACK
+ # flush the local cache if it's in writeback mode
+ call mn10300_local_dcache_flush_inv[],0
+ setlb
+ mov (CHCTR),d0
+ btst CHCTR_DCBUSY,d0 # wait till not busy (use CPU loop buffer)
+ lne
+#endif
+
+ # now sleep waiting for further instructions
+secondary_sleep:
+ mov CPUM_SLEEP,d0
+ movhu d0,(CPUM)
+ nop
+ nop
+ bra secondary_sleep
+ .size startup_secondary,.-startup_secondary
+#endif /* CONFIG_SMP */
+
+###############################################################################
+#
+#
+#
+###############################################################################
ENTRY(__head_end)
/*