summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci/ops-au1000.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/ops-au1000.c')
-rw-r--r--arch/mips/pci/ops-au1000.c53
1 files changed, 26 insertions, 27 deletions
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 6b29904acf45..1314bd58f036 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -1,8 +1,8 @@
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 pci support.
+ * Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001,2002,2003 MontaVista Software Inc.
+ * Copyright 2001-2003, 2007 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
@@ -69,10 +69,27 @@ void mod_wired_entry(int entry, unsigned long entrylo0,
write_c0_pagemask(old_pagemask);
}
-struct vm_struct *pci_cfg_vm;
+static struct vm_struct *pci_cfg_vm;
static int pci_cfg_wired_entry;
-static int first_cfg = 1;
-unsigned long last_entryLo0, last_entryLo1;
+static unsigned long last_entryLo0, last_entryLo1;
+
+/*
+ * We can't ioremap the entire pci config space because it's too large.
+ * Nor can we call ioremap dynamically because some device drivers use
+ * the PCI config routines from within interrupt handlers and that
+ * becomes a problem in get_vm_area(). We use one wired TLB to handle
+ * all config accesses for all busses.
+ */
+void __init au1x_pci_cfg_init(void)
+{
+ /* Reserve a wired entry for PCI config accesses */
+ pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
+ if (!pci_cfg_vm)
+ panic(KERN_ERR "PCI unable to get vm area\n");
+ pci_cfg_wired_entry = read_c0_wired();
+ add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
+ last_entryLo0 = last_entryLo1 = 0xffffffff;
+}
static int config_access(unsigned char access_type, struct pci_bus *bus,
unsigned int dev_fn, unsigned char where,
@@ -97,27 +114,6 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
Au1500_PCI_STATCMD);
au_sync_udelay(1);
- /*
- * We can't ioremap the entire pci config space because it's
- * too large. Nor can we call ioremap dynamically because some
- * device drivers use the pci config routines from within
- * interrupt handlers and that becomes a problem in get_vm_area().
- * We use one wired tlb to handle all config accesses for all
- * busses. To improve performance, if the current device
- * is the same as the last device accessed, we don't touch the
- * tlb.
- */
- if (first_cfg) {
- /* reserve a wired entry for pci config accesses */
- first_cfg = 0;
- pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
- if (!pci_cfg_vm)
- panic(KERN_ERR "PCI unable to get vm area\n");
- pci_cfg_wired_entry = read_c0_wired();
- add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
- last_entryLo0 = last_entryLo1 = 0xffffffff;
- }
-
/* Allow board vendors to implement their own off-chip idsel.
* If it doesn't succeed, may as well bail out at this point.
*/
@@ -144,9 +140,12 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
/* page boundary */
cfg_base = cfg_base & PAGE_MASK;
+ /*
+ * To improve performance, if the current device is the same as
+ * the last device accessed, we don't touch the TLB.
+ */
entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
-
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);