summaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/platform/coldfire/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68knommu/platform/coldfire/head.S')
-rw-r--r--arch/m68knommu/platform/coldfire/head.S250
1 files changed, 0 insertions, 250 deletions
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
deleted file mode 100644
index 129bff4956b5..000000000000
--- a/arch/m68knommu/platform/coldfire/head.S
+++ /dev/null
@@ -1,250 +0,0 @@
-/*****************************************************************************/
-
-/*
- * head.S -- common startup code for ColdFire CPUs.
- *
- * (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
- */
-
-/*****************************************************************************/
-
-#include <linux/sys.h>
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/asm-offsets.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/thread_info.h>
-
-/*****************************************************************************/
-
-/*
- * If we don't have a fixed memory size, then lets build in code
- * to auto detect the DRAM size. Obviously this is the prefered
- * method, and should work for most boards. It won't work for those
- * that do not have their RAM starting at address 0, and it only
- * works on SDRAM (not boards fitted with SRAM).
- */
-#if CONFIG_RAMSIZE != 0
-.macro GET_MEM_SIZE
- movel #CONFIG_RAMSIZE,%d0 /* hard coded memory size */
-.endm
-
-#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
- defined(CONFIG_M5249) || defined(CONFIG_M527x) || \
- defined(CONFIG_M528x) || defined(CONFIG_M5307) || \
- defined(CONFIG_M5407)
-/*
- * Not all these devices have exactly the same DRAM controller,
- * but the DCMR register is virtually identical - give or take
- * a couple of bits. The only exception is the 5272 devices, their
- * DRAM controller is quite different.
- */
-.macro GET_MEM_SIZE
- movel MCFSIM_DMR0,%d0 /* get mask for 1st bank */
- btst #0,%d0 /* check if region enabled */
- beq 1f
- andl #0xfffc0000,%d0
- beq 1f
- addl #0x00040000,%d0 /* convert mask to size */
-1:
- movel MCFSIM_DMR1,%d1 /* get mask for 2nd bank */
- btst #0,%d1 /* check if region enabled */
- beq 2f
- andl #0xfffc0000,%d1
- beq 2f
- addl #0x00040000,%d1
- addl %d1,%d0 /* total mem size in d0 */
-2:
-.endm
-
-#elif defined(CONFIG_M5272)
-.macro GET_MEM_SIZE
- movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */
- andil #0xfffff000,%d0 /* mask out chip select options */
- negl %d0 /* negate bits */
-.endm
-
-#elif defined(CONFIG_M520x)
-.macro GET_MEM_SIZE
- clrl %d0
- movel MCFSIM_SDCS0, %d2 /* Get SDRAM chip select 0 config */
- andl #0x1f, %d2 /* Get only the chip select size */
- beq 3f /* Check if it is enabled */
- addql #1, %d2 /* Form exponent */
- moveql #1, %d0
- lsll %d2, %d0 /* 2 ^ exponent */
-3:
- movel MCFSIM_SDCS1, %d2 /* Get SDRAM chip select 1 config */
- andl #0x1f, %d2 /* Get only the chip select size */
- beq 4f /* Check if it is enabled */
- addql #1, %d2 /* Form exponent */
- moveql #1, %d1
- lsll %d2, %d1 /* 2 ^ exponent */
- addl %d1, %d0 /* Total size of SDRAM in d0 */
-4:
-.endm
-
-#else
-#error "ERROR: I don't know how to probe your boards memory size?"
-#endif
-
-/*****************************************************************************/
-
-/*
- * Boards and platforms can do specific early hardware setup if
- * they need to. Most don't need this, define away if not required.
- */
-#ifndef PLATFORM_SETUP
-#define PLATFORM_SETUP
-#endif
-
-/*****************************************************************************/
-
-.global _start
-.global _rambase
-.global _ramvec
-.global _ramstart
-.global _ramend
-#if defined(CONFIG_UBOOT)
-.global _init_sp
-#endif
-
-/*****************************************************************************/
-
-.data
-
-/*
- * During startup we store away the RAM setup. These are not in the
- * bss, since their values are determined and written before the bss
- * has been cleared.
- */
-_rambase:
-.long 0
-_ramvec:
-.long 0
-_ramstart:
-.long 0
-_ramend:
-.long 0
-#if defined(CONFIG_UBOOT)
-_init_sp:
-.long 0
-#endif
-
-/*****************************************************************************/
-
-__HEAD
-
-/*
- * This is the codes first entry point. This is where it all
- * begins...
- */
-
-_start:
- nop /* filler */
- movew #0x2700, %sr /* no interrupts */
-#if defined(CONFIG_UBOOT)
- movel %sp,_init_sp /* save initial stack pointer */
-#endif
-
- /*
- * Do any platform or board specific setup now. Most boards
- * don't need anything. Those exceptions are define this in
- * their board specific includes.
- */
- PLATFORM_SETUP
-
- /*
- * Create basic memory configuration. Set VBR accordingly,
- * and size memory.
- */
- movel #CONFIG_VECTORBASE,%a7
- movec %a7,%VBR /* set vectors addr */
- movel %a7,_ramvec
-
- movel #CONFIG_RAMBASE,%a7 /* mark the base of RAM */
- movel %a7,_rambase
-
- GET_MEM_SIZE /* macro code determines size */
- addl %a7,%d0
- movel %d0,_ramend /* set end ram addr */
-
- /*
- * Now that we know what the memory is, lets enable cache
- * and get things moving. This is Coldfire CPU specific. Not
- * all version cores have identical cache register setup. But
- * it is very similar. Define the exact settings in the headers
- * then the code here is the same for all.
- */
- movel #CACHE_INIT,%d0 /* invalidate whole cache */
- movec %d0,%CACR
- nop
- movel #ACR0_MODE,%d0 /* set RAM region for caching */
- movec %d0,%ACR0
- movel #ACR1_MODE,%d0 /* anything else to cache? */
- movec %d0,%ACR1
-#ifdef ACR2_MODE
- movel #ACR2_MODE,%d0
- movec %d0,%ACR2
- movel #ACR3_MODE,%d0
- movec %d0,%ACR3
-#endif
- movel #CACHE_MODE,%d0 /* enable cache */
- movec %d0,%CACR
- nop
-
-#ifdef CONFIG_ROMFS_FS
- /*
- * Move ROM filesystem above bss :-)
- */
- lea _sbss,%a0 /* get start of bss */
- lea _ebss,%a1 /* set up destination */
- movel %a0,%a2 /* copy of bss start */
-
- movel 8(%a0),%d0 /* get size of ROMFS */
- addql #8,%d0 /* allow for rounding */
- andl #0xfffffffc, %d0 /* whole words */
-
- addl %d0,%a0 /* copy from end */
- addl %d0,%a1 /* copy from end */
- movel %a1,_ramstart /* set start of ram */
-
-_copy_romfs:
- movel -(%a0),%d0 /* copy dword */
- movel %d0,-(%a1)
- cmpl %a0,%a2 /* check if at end */
- bne _copy_romfs
-
-#else /* CONFIG_ROMFS_FS */
- lea _ebss,%a1
- movel %a1,_ramstart
-#endif /* CONFIG_ROMFS_FS */
-
-
- /*
- * Zero out the bss region.
- */
- lea _sbss,%a0 /* get start of bss */
- lea _ebss,%a1 /* get end of bss */
- clrl %d0 /* set value */
-_clear_bss:
- movel %d0,(%a0)+ /* clear each word */
- cmpl %a0,%a1 /* check if at end */
- bne _clear_bss
-
- /*
- * Load the current task pointer and stack.
- */
- lea init_thread_union,%a0
- lea THREAD_SIZE(%a0),%sp
-
- /*
- * Assember start up done, start code proper.
- */
- jsr start_kernel /* start Linux kernel */
-
-_exit:
- jmp _exit /* should never get here */
-
-/*****************************************************************************/