summaryrefslogtreecommitdiffstats
path: root/arch/m68k/Kconfig.devices
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/Kconfig.devices')
-rw-r--r--arch/m68k/Kconfig.devices171
1 files changed, 171 insertions, 0 deletions
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
new file mode 100644
index 000000000000..d964dc4c2ce8
--- /dev/null
+++ b/arch/m68k/Kconfig.devices
@@ -0,0 +1,171 @@
+if MMU
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ depends on BROKEN && (Q40 || SUN3X)
+ default y
+
+menu "Platform devices"
+
+config HEARTBEAT
+ bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
+ default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
+ help
+ Use the power-on LED on your machine as a load meter. The exact
+ behavior is platform-dependent, but normally the flash frequency is
+ a hyperbolic function of the 5-minute load average.
+
+# We have a dedicated heartbeat LED. :-)
+config PROC_HARDWARE
+ bool "/proc/hardware support"
+ help
+ Say Y here to support the /proc/hardware file, which gives you
+ access to information about the machine you're running on,
+ including the model, CPU, MMU, clock speed, BogoMIPS rating,
+ and memory size.
+
+endmenu
+
+menu "Character devices"
+
+config ATARI_MFPSER
+ tristate "Atari MFP serial support"
+ depends on ATARI
+ ---help---
+ If you like to use the MFP serial ports ("Modem1", "Serial1") under
+ Linux, say Y. The driver equally supports all kinds of MFP serial
+ ports and automatically detects whether Serial1 is available.
+
+ To compile this driver as a module, choose M here.
+
+ Note for Falcon users: You also have an MFP port, it's just not
+ wired to the outside... But you could use the port under Linux.
+
+config ATARI_MIDI
+ tristate "Atari MIDI serial support"
+ depends on ATARI
+ help
+ If you want to use your Atari's MIDI port in Linux, say Y.
+
+ To compile this driver as a module, choose M here.
+
+config ATARI_DSP56K
+ tristate "Atari DSP56k support (EXPERIMENTAL)"
+ depends on ATARI && EXPERIMENTAL
+ help
+ If you want to be able to use the DSP56001 in Falcons, say Y. This
+ driver is still experimental, and if you don't know what it is, or
+ if you don't have this processor, just say N.
+
+ To compile this driver as a module, choose M here.
+
+config AMIGA_BUILTIN_SERIAL
+ tristate "Amiga builtin serial support"
+ depends on AMIGA
+ help
+ If you want to use your Amiga's built-in serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config MULTIFACE_III_TTY
+ tristate "Multiface Card III serial support"
+ depends on AMIGA
+ help
+ If you want to use a Multiface III card's serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config GVPIOEXT
+ tristate "GVP IO-Extender support"
+ depends on PARPORT=n && ZORRO
+ help
+ If you want to use a GVP IO-Extender serial card in Linux, say Y.
+ Otherwise, say N.
+
+config GVPIOEXT_LP
+ tristate "GVP IO-Extender parallel printer support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable driving a printer from the parallel port on your
+ GVP IO-Extender card, N otherwise.
+
+config GVPIOEXT_PLIP
+ tristate "GVP IO-Extender PLIP support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable doing IP over the parallel port on your GVP
+ IO-Extender card, N otherwise.
+
+config MAC_HID
+ bool
+ depends on INPUT_ADBHID
+ default y
+
+config HPDCA
+ tristate "HP DCA serial support"
+ depends on DIO && SERIAL_8250
+ help
+ If you want to use the internal "DCA" serial ports on an HP300
+ machine, say Y here.
+
+config HPAPCI
+ tristate "HP APCI serial support"
+ depends on HP300 && SERIAL_8250 && EXPERIMENTAL
+ help
+ If you want to use the internal "APCI" serial ports on an HP400
+ machine, say Y here.
+
+config MVME147_SCC
+ bool "SCC support for MVME147 serial ports"
+ depends on MVME147 && BROKEN
+ help
+ This is the driver for the serial ports on the Motorola MVME147
+ boards. Everyone using one of these boards should say Y here.
+
+config MVME162_SCC
+ bool "SCC support for MVME162 serial ports"
+ depends on MVME16x && BROKEN
+ help
+ This is the driver for the serial ports on the Motorola MVME162 and
+ 172 boards. Everyone using one of these boards should say Y here.
+
+config BVME6000_SCC
+ bool "SCC support for BVME6000 serial ports"
+ depends on BVME6000 && BROKEN
+ help
+ This is the driver for the serial ports on the BVME4000 and BVME6000
+ boards from BVM Ltd. Everyone using one of these boards should say
+ Y here.
+
+config DN_SERIAL
+ bool "Support for DN serial port (dummy)"
+ depends on APOLLO
+
+config SERIAL_CONSOLE
+ bool "Support for serial port console"
+ depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+ If you don't have a VGA card installed and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ If unsure, say N.
+
+endmenu
+
+endif