diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa25x.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h | 2 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa320.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h | 130 | ||||
-rw-r--r-- | arch/arm/mach-pxa/include/mach/mfp-pxa930.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/mfp-pxa3xx.c | 189 | ||||
-rw-r--r-- | arch/arm/mach-pxa/pxa300.c | 10 | ||||
-rw-r--r-- | arch/arm/mach-pxa/pxa320.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-pxa/pxa930.c | 6 | ||||
-rw-r--r-- | arch/arm/plat-pxa/Makefile | 2 | ||||
-rw-r--r-- | arch/arm/plat-pxa/include/plat/mfp.h | 369 | ||||
-rw-r--r-- | arch/arm/plat-pxa/mfp.c | 278 |
14 files changed, 680 insertions, 317 deletions
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h index a72869b73ee3..b13dc0269a6d 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h @@ -1,7 +1,6 @@ #ifndef __ASM_ARCH_MFP_PXA25X_H #define __ASM_ARCH_MFP_PXA25X_H -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index da4f85a4f990..6543c05f47ed 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -8,7 +8,6 @@ * specific controller, and this should work in most cases. */ -#include <mach/mfp.h> #include <mach/mfp-pxa2xx.h> /* Note: GPIO3/GPIO4 will be driven by Power I2C when PCFR/PI2C_EN diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index 3e9211591e20..658b28ed129b 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -1,7 +1,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H -#include <mach/mfp.h> +#include <plat/mfp.h> /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h index 928fbef9cbf3..ae8441192ef0 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_MFP_PXA300_H #define __ASM_ARCH_MFP_PXA300_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h index 80a0da9e092d..07897e61d05a 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARCH_MFP_PXA320_H #define __ASM_ARCH_MFP_PXA320_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h index 1f6b35c015d0..d375195d982b 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h @@ -1,68 +1,9 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H -#define MFPR_BASE (0x40e10000) -#define MFPR_SIZE (PAGE_SIZE) - -/* MFPR register bit definitions */ -#define MFPR_PULL_SEL (0x1 << 15) -#define MFPR_PULLUP_EN (0x1 << 14) -#define MFPR_PULLDOWN_EN (0x1 << 13) -#define MFPR_SLEEP_SEL (0x1 << 9) -#define MFPR_SLEEP_OE_N (0x1 << 7) -#define MFPR_EDGE_CLEAR (0x1 << 6) -#define MFPR_EDGE_FALL_EN (0x1 << 5) -#define MFPR_EDGE_RISE_EN (0x1 << 4) - -#define MFPR_SLEEP_DATA(x) ((x) << 8) -#define MFPR_DRIVE(x) (((x) & 0x7) << 10) -#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) +#include <plat/mfp.h> -#define MFPR_EDGE_NONE (0) -#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) -#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) -#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) - -/* - * Table that determines the low power modes outputs, with actual settings - * used in parentheses for don't-care values. Except for the float output, - * the configured driven and pulled levels match, so if there is a need for - * non-LPM pulled output, the same configuration could probably be used. - * - * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel - * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) - * - * Input 0 X(0) X(0) X(0) 0 - * Drive 0 0 0 0 X(1) 0 - * Drive 1 0 1 X(1) 0 0 - * Pull hi (1) 1 X(1) 1 0 0 - * Pull lo (0) 1 X(0) 0 1 0 - * Z (float) 1 X(0) 0 0 0 - */ -#define MFPR_LPM_INPUT (0) -#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) -#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) -#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) -#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) -#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) -#define MFPR_LPM_MASK (0xe080) - -/* - * The pullup and pulldown state of the MFP pin at run mode is by default - * determined by the selected alternate function. In case that some buggy - * devices need to override this default behavior, the definitions below - * indicates the setting of corresponding MFPR bits - * - * Definition pull_sel pullup_en pulldown_en - * MFPR_PULL_NONE 0 0 0 - * MFPR_PULL_LOW 1 0 1 - * MFPR_PULL_HIGH 1 1 0 - * MFPR_PULL_BOTH 1 1 1 - */ -#define MFPR_PULL_NONE (0) -#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) -#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) -#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) +#define MFPR_BASE (0x40e10000) /* PXA3xx common MFP configurations - processor specific ones defined * in mfp-pxa300.h and mfp-pxa320.h @@ -197,56 +138,21 @@ #define GPIO5_2_GPIO MFP_CFG(GPIO5_2, AF0) #define GPIO6_2_GPIO MFP_CFG(GPIO6_2, AF0) -/* - * each MFP pin will have a MFPR register, since the offset of the - * register varies between processors, the processor specific code - * should initialize the pin offsets by pxa3xx_mfp_init_addr() - * - * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map" - * structure, which represents a range of MFP pins from "start" to - * "end", with the offset begining at "offset", to define a single - * pin, let "end" = -1 - * - * use - * - * MFP_ADDR_X() to define a range of pins - * MFP_ADDR() to define a single pin - * MFP_ADDR_END to signal the end of pin offset definitions - */ -struct pxa3xx_mfp_addr_map { - unsigned int start; - unsigned int end; - unsigned long offset; -}; - -#define MFP_ADDR_X(start, end, offset) \ - { MFP_PIN_##start, MFP_PIN_##end, offset } - -#define MFP_ADDR(pin, offset) \ - { MFP_PIN_##pin, -1, offset } - -#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } - -/* - * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access - * to the MFPR register - */ -unsigned long pxa3xx_mfp_read(int mfp); -void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val); - -/* - * pxa3xx_mfp_config - configure the MFPR registers - * - * used by board specific initialization code - */ -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num); - -/* - * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin - * index and MFPR register offset - * - * used by processor specific code +/* NOTE: usage of these two functions is not recommended, + * use pxa3xx_mfp_config() instead. */ -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *); -void __init pxa3xx_init_mfp(void); +static inline unsigned long pxa3xx_mfp_read(int mfp) +{ + return mfp_read(mfp); +} + +static inline void pxa3xx_mfp_write(int mfp, unsigned long val) +{ + mfp_write(mfp, val); +} + +static inline void pxa3xx_mfp_config(unsigned long *mfp_cfg, int num) +{ + mfp_config(mfp_cfg, num); +} #endif /* __ASM_ARCH_MFP_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h index fa73f56a1372..0d119d3b9221 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_MFP_PXA9xx_H #define __ASM_ARCH_MFP_PXA9xx_H -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> /* GPIO */ diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index eb197a6e8e94..7a270eecd480 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -20,183 +20,9 @@ #include <linux/sysdev.h> #include <mach/hardware.h> -#include <mach/mfp.h> #include <mach/mfp-pxa3xx.h> #include <mach/pxa3xx-regs.h> -/* mfp_spin_lock is used to ensure that MFP register configuration - * (most likely a read-modify-write operation) is atomic, and that - * mfp_table[] is consistent - */ -static DEFINE_SPINLOCK(mfp_spin_lock); - -static void __iomem *mfpr_mmio_base = (void __iomem *)&__REG(MFPR_BASE); - -struct pxa3xx_mfp_pin { - unsigned long config; /* -1 for not configured */ - unsigned long mfpr_off; /* MFPRxx Register offset */ - unsigned long mfpr_run; /* Run-Mode Register Value */ - unsigned long mfpr_lpm; /* Low Power Mode Register Value */ -}; - -static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX]; - -/* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */ -static const unsigned long mfpr_lpm[] = { - MFPR_LPM_INPUT, - MFPR_LPM_DRIVE_LOW, - MFPR_LPM_DRIVE_HIGH, - MFPR_LPM_PULL_LOW, - MFPR_LPM_PULL_HIGH, - MFPR_LPM_FLOAT, -}; - -/* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */ -static const unsigned long mfpr_pull[] = { - MFPR_PULL_NONE, - MFPR_PULL_LOW, - MFPR_PULL_HIGH, - MFPR_PULL_BOTH, -}; - -/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */ -static const unsigned long mfpr_edge[] = { - MFPR_EDGE_NONE, - MFPR_EDGE_RISE, - MFPR_EDGE_FALL, - MFPR_EDGE_BOTH, -}; - -#define mfpr_readl(off) \ - __raw_readl(mfpr_mmio_base + (off)) - -#define mfpr_writel(off, val) \ - __raw_writel(val, mfpr_mmio_base + (off)) - -#define mfp_configured(p) ((p)->config != -1) - -/* - * perform a read-back of any MFPR register to make sure the - * previous writings are finished - */ -#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0) - -static inline void __mfp_config_run(struct pxa3xx_mfp_pin *p) -{ - if (mfp_configured(p)) - mfpr_writel(p->mfpr_off, p->mfpr_run); -} - -static inline void __mfp_config_lpm(struct pxa3xx_mfp_pin *p) -{ - if (mfp_configured(p)) { - unsigned long mfpr_clr = (p->mfpr_run & ~MFPR_EDGE_BOTH) | MFPR_EDGE_CLEAR; - if (mfpr_clr != p->mfpr_run) - mfpr_writel(p->mfpr_off, mfpr_clr); - if (p->mfpr_lpm != mfpr_clr) - mfpr_writel(p->mfpr_off, p->mfpr_lpm); - } -} - -void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num) -{ - unsigned long flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (i = 0; i < num; i++, mfp_cfgs++) { - unsigned long tmp, c = *mfp_cfgs; - struct pxa3xx_mfp_pin *p; - int pin, af, drv, lpm, edge, pull; - - pin = MFP_PIN(c); - BUG_ON(pin >= MFP_PIN_MAX); - p = &mfp_table[pin]; - - af = MFP_AF(c); - drv = MFP_DS(c); - lpm = MFP_LPM_STATE(c); - edge = MFP_LPM_EDGE(c); - pull = MFP_PULL(c); - - /* run-mode pull settings will conflict with MFPR bits of - * low power mode state, calculate mfpr_run and mfpr_lpm - * individually if pull != MFP_PULL_NONE - */ - tmp = MFPR_AF_SEL(af) | MFPR_DRIVE(drv); - - if (likely(pull == MFP_PULL_NONE)) { - p->mfpr_run = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; - p->mfpr_lpm = p->mfpr_run; - } else { - p->mfpr_lpm = tmp | mfpr_lpm[lpm] | mfpr_edge[edge]; - p->mfpr_run = tmp | mfpr_pull[pull]; - } - - p->config = c; __mfp_config_run(p); - } - - mfpr_sync(); - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -unsigned long pxa3xx_mfp_read(int mfp) -{ - unsigned long val, flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - val = mfpr_readl(mfp_table[mfp].mfpr_off); - spin_unlock_irqrestore(&mfp_spin_lock, flags); - - return val; -} - -void pxa3xx_mfp_write(int mfp, unsigned long val) -{ - unsigned long flags; - - BUG_ON(mfp >= MFP_PIN_MAX); - - spin_lock_irqsave(&mfp_spin_lock, flags); - mfpr_writel(mfp_table[mfp].mfpr_off, val); - mfpr_sync(); - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map) -{ - struct pxa3xx_mfp_addr_map *p; - unsigned long offset, flags; - int i; - - spin_lock_irqsave(&mfp_spin_lock, flags); - - for (p = map; p->start != MFP_PIN_INVALID; p++) { - offset = p->offset; - i = p->start; - - do { - mfp_table[i].mfpr_off = offset; - mfp_table[i].mfpr_run = 0; - mfp_table[i].mfpr_lpm = 0; - offset += 4; i++; - } while ((i <= p->end) && (p->end != -1)); - } - - spin_unlock_irqrestore(&mfp_spin_lock, flags); -} - -void __init pxa3xx_init_mfp(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(mfp_table); i++) - mfp_table[i].config = -1; -} - #ifdef CONFIG_PM /* * Configure the MFPs appropriately for suspend/resume. @@ -207,23 +33,13 @@ void __init pxa3xx_init_mfp(void) */ static int pxa3xx_mfp_suspend(struct sys_device *d, pm_message_t state) { - int pin; - - for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { - struct pxa3xx_mfp_pin *p = &mfp_table[pin]; - __mfp_config_lpm(p); - } + mfp_config_lpm(); return 0; } static int pxa3xx_mfp_resume(struct sys_device *d) { - int pin; - - for (pin = 0; pin < ARRAY_SIZE(mfp_table); pin++) { - struct pxa3xx_mfp_pin *p = &mfp_table[pin]; - __mfp_config_run(p); - } + mfp_config_run(); /* clear RDH bit when MFP settings are restored * @@ -231,7 +47,6 @@ static int pxa3xx_mfp_resume(struct sys_device *d) * preserve them here in case they will be referenced later */ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - return 0; } #else diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 37bb12d13ca2..4ba6d21f851c 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -23,7 +23,7 @@ #include "devices.h" #include "clock.h" -static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), MFP_ADDR_X(GPIO3, GPIO26, 0x027c), @@ -72,7 +72,7 @@ static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = { }; /* override pxa300 MFP register addresses */ -static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO30, GPIO98, 0x0418), MFP_ADDR_X(GPIO7_2, GPIO12_2, 0x052C), @@ -98,13 +98,13 @@ static struct clk_lookup pxa310_clkregs[] = { static int __init pxa300_init(void) { if (cpu_is_pxa300() || cpu_is_pxa310()) { - pxa3xx_init_mfp(); - pxa3xx_mfp_init_addr(pxa300_mfp_addr_map); + mfp_init_base(io_p2v(MFPR_BASE)); + mfp_init_addr(pxa300_mfp_addr_map); clks_register(ARRAY_AND_SIZE(common_clkregs)); } if (cpu_is_pxa310()) { - pxa3xx_mfp_init_addr(pxa310_mfp_addr_map); + mfp_init_addr(pxa310_mfp_addr_map); clks_register(ARRAY_AND_SIZE(pxa310_clkregs)); } diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index e708f4e0ecaf..8b3d97efadab 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -23,7 +23,7 @@ #include "devices.h" #include "clock.h" -static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = { MFP_ADDR_X(GPIO0, GPIO4, 0x0124), MFP_ADDR_X(GPIO5, GPIO9, 0x028C), @@ -86,8 +86,8 @@ static struct clk_lookup pxa320_clkregs[] = { static int __init pxa320_init(void) { if (cpu_is_pxa320()) { - pxa3xx_init_mfp(); - pxa3xx_mfp_init_addr(pxa320_mfp_addr_map); + mfp_init_base(io_p2v(MFPR_BASE)); + mfp_init_addr(pxa320_mfp_addr_map); clks_register(ARRAY_AND_SIZE(pxa320_clkregs)); } diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index f15dfa55f27f..71131742fffd 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -18,7 +18,7 @@ #include <mach/pxa930.h> -static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = { +static struct mfp_addr_map pxa930_mfp_addr_map[] __initdata = { MFP_ADDR(GPIO0, 0x02e0), MFP_ADDR(GPIO1, 0x02dc), @@ -179,8 +179,8 @@ static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = { static int __init pxa930_init(void) { if (cpu_is_pxa930()) { - pxa3xx_init_mfp(); - pxa3xx_mfp_init_addr(pxa930_mfp_addr_map); + mfp_init_base(io_p2v(MFPR_BASE)); + mfp_init_addr(pxa930_mfp_addr_map); } return 0; diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index b837df440483..4be37235f57b 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -2,6 +2,6 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o +obj-y := dma.o mfp.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h new file mode 100644 index 000000000000..a22229cde096 --- /dev/null +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -0,0 +1,369 @@ +/* + * arch/arm/plat-pxa/include/plat/mfp.h + * + * Common Multi-Function Pin Definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * 2007-8-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_PLAT_MFP_H +#define __ASM_PLAT_MFP_H + +#define mfp_to_gpio(m) ((m) % 128) + +/* list of all the configurable MFP pins */ +enum { + MFP_PIN_INVALID = -1, + + MFP_PIN_GPIO0 = 0, + MFP_PIN_GPIO1, + MFP_PIN_GPIO2, + MFP_PIN_GPIO3, + MFP_PIN_GPIO4, + MFP_PIN_GPIO5, + MFP_PIN_GPIO6, + MFP_PIN_GPIO7, + MFP_PIN_GPIO8, + MFP_PIN_GPIO9, + MFP_PIN_GPIO10, + MFP_PIN_GPIO11, + MFP_PIN_GPIO12, + MFP_PIN_GPIO13, + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO16, + MFP_PIN_GPIO17, + MFP_PIN_GPIO18, + MFP_PIN_GPIO19, + MFP_PIN_GPIO20, + MFP_PIN_GPIO21, + MFP_PIN_GPIO22, + MFP_PIN_GPIO23, + MFP_PIN_GPIO24, + MFP_PIN_GPIO25, + MFP_PIN_GPIO26, + MFP_PIN_GPIO27, + MFP_PIN_GPIO28, + MFP_PIN_GPIO29, + MFP_PIN_GPIO30, + MFP_PIN_GPIO31, + MFP_PIN_GPIO32, + MFP_PIN_GPIO33, + MFP_PIN_GPIO34, + MFP_PIN_GPIO35, + MFP_PIN_GPIO36, + MFP_PIN_GPIO37, + MFP_PIN_GPIO38, + MFP_PIN_GPIO39, + MFP_PIN_GPIO40, + MFP_PIN_GPIO41, + MFP_PIN_GPIO42, + MFP_PIN_GPIO43, + MFP_PIN_GPIO44, + MFP_PIN_GPIO45, + MFP_PIN_GPIO46, + MFP_PIN_GPIO47, + MFP_PIN_GPIO48, + MFP_PIN_GPIO49, + MFP_PIN_GPIO50, + MFP_PIN_GPIO51, + MFP_PIN_GPIO52, + MFP_PIN_GPIO53, + MFP_PIN_GPIO54, + MFP_PIN_GPIO55, + MFP_PIN_GPIO56, + MFP_PIN_GPIO57, + MFP_PIN_GPIO58, + MFP_PIN_GPIO59, + MFP_PIN_GPIO60, + MFP_PIN_GPIO61, + MFP_PIN_GPIO62, + MFP_PIN_GPIO63, + MFP_PIN_GPIO64, + MFP_PIN_GPIO65, + MFP_PIN_GPIO66, + MFP_PIN_GPIO67, + MFP_PIN_GPIO68, + MFP_PIN_GPIO69, + MFP_PIN_GPIO70, + MFP_PIN_GPIO71, + MFP_PIN_GPIO72, + MFP_PIN_GPIO73, + MFP_PIN_GPIO74, + MFP_PIN_GPIO75, + MFP_PIN_GPIO76, + MFP_PIN_GPIO77, + MFP_PIN_GPIO78, + MFP_PIN_GPIO79, + MFP_PIN_GPIO80, + MFP_PIN_GPIO81, + MFP_PIN_GPIO82, + MFP_PIN_GPIO83, + MFP_PIN_GPIO84, + MFP_PIN_GPIO85, + MFP_PIN_GPIO86, + MFP_PIN_GPIO87, + MFP_PIN_GPIO88, + MFP_PIN_GPIO89, + MFP_PIN_GPIO90, + MFP_PIN_GPIO91, + MFP_PIN_GPIO92, + MFP_PIN_GPIO93, + MFP_PIN_GPIO94, + MFP_PIN_GPIO95, + MFP_PIN_GPIO96, + MFP_PIN_GPIO97, + MFP_PIN_GPIO98, + MFP_PIN_GPIO99, + MFP_PIN_GPIO100, + MFP_PIN_GPIO101, + MFP_PIN_GPIO102, + MFP_PIN_GPIO103, + MFP_PIN_GPIO104, + MFP_PIN_GPIO105, + MFP_PIN_GPIO106, + MFP_PIN_GPIO107, + MFP_PIN_GPIO108, + MFP_PIN_GPIO109, + MFP_PIN_GPIO110, + MFP_PIN_GPIO111, + MFP_PIN_GPIO112, + MFP_PIN_GPIO113, + MFP_PIN_GPIO114, + MFP_PIN_GPIO115, + MFP_PIN_GPIO116, + MFP_PIN_GPIO117, + MFP_PIN_GPIO118, + MFP_PIN_GPIO119, + MFP_PIN_GPIO120, + MFP_PIN_GPIO121, + MFP_PIN_GPIO122, + MFP_PIN_GPIO123, + MFP_PIN_GPIO124, + MFP_PIN_GPIO125, + MFP_PIN_GPIO126, + MFP_PIN_GPIO127, + MFP_PIN_GPIO0_2, + MFP_PIN_GPIO1_2, + MFP_PIN_GPIO2_2, + MFP_PIN_GPIO3_2, + MFP_PIN_GPIO4_2, + MFP_PIN_GPIO5_2, + MFP_PIN_GPIO6_2, + MFP_PIN_GPIO7_2, + MFP_PIN_GPIO8_2, + MFP_PIN_GPIO9_2, + MFP_PIN_GPIO10_2, + MFP_PIN_GPIO11_2, + MFP_PIN_GPIO12_2, + MFP_PIN_GPIO13_2, + MFP_PIN_GPIO14_2, + MFP_PIN_GPIO15_2, + MFP_PIN_GPIO16_2, + MFP_PIN_GPIO17_2, + + MFP_PIN_ULPI_STP, + MFP_PIN_ULPI_NXT, + MFP_PIN_ULPI_DIR, + + MFP_PIN_nXCVREN, + MFP_PIN_DF_CLE_nOE, + MFP_PIN_DF_nADV1_ALE, + MFP_PIN_DF_SCLK_E, + MFP_PIN_DF_SCLK_S, + MFP_PIN_nBE0, + MFP_PIN_nBE1, + MFP_PIN_DF_nADV2_ALE, + MFP_PIN_DF_INT_RnB, + MFP_PIN_DF_nCS0, + MFP_PIN_DF_nCS1, + MFP_PIN_nLUA, + MFP_PIN_nLLA, + MFP_PIN_DF_nWE, + MFP_PIN_DF_ALE_nWE, + MFP_PIN_DF_nRE_nOE, + MFP_PIN_DF_ADDR0, + MFP_PIN_DF_ADDR1, + MFP_PIN_DF_ADDR2, + MFP_PIN_DF_ADDR3, + MFP_PIN_DF_IO0, + MFP_PIN_DF_IO1, + MFP_PIN_DF_IO2, + MFP_PIN_DF_IO3, + MFP_PIN_DF_IO4, + MFP_PIN_DF_IO5, + MFP_PIN_DF_IO6, + MFP_PIN_DF_IO7, + MFP_PIN_DF_IO8, + MFP_PIN_DF_IO9, + MFP_PIN_DF_IO10, + MFP_PIN_DF_IO11, + MFP_PIN_DF_IO12, + MFP_PIN_DF_IO13, + MFP_PIN_DF_IO14, + MFP_PIN_DF_IO15, + + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + + MFP_PIN_MAX, +}; + +/* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_DEFAULT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_INPUT (0x6 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_MASK (0x3 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x3) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) + +#define MFP_CFG(pin, af) \ + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) + +#define MFP_CFG_DRV(pin, af, drv) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) + +#define MFP_CFG_LPM(pin, af, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) + +#define MFP_CFG_X(pin, af, drv, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) + +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by mfp_init() + * + * mfp_init_base() - accepts a virtual base for all MFPR registers and + * initialize the MFP table to a default state + * + * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which + * represents a range of MFP pins from "start" to "end", with the offset + * begining at "offset", to define a single pin, let "end" = -1. + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +void __init mfp_init_base(unsigned long mfpr_base); +void __init mfp_init_addr(struct mfp_addr_map *map); + +/* + * mfp_{read, write}() - for direct read/write access to the MFPR register + * mfp_config() - for configuring a group of MFPR registers + * mfp_config_lpm() - configuring all low power MFPR registers for suspend + * mfp_config_run() - configuring all run time MFPR registers after resume + */ +unsigned long mfp_read(int mfp); +void mfp_write(int mfp, unsigned long mfpr_val); +void mfp_config(unsigned long *mfp_cfgs, int num); +void mfp_config_run(void); +void mfp_config_lpm(void); +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ + +#endif /* __ASM_PLAT_MFP_H */ diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c new file mode 100644 index 000000000000..e716c622a17c --- /dev/null +++ b/arch/arm/plat-pxa/mfp.c @@ -0,0 +1,278 @@ +/* + * linux/arch/arm/plat-pxa/mfp.c + * + * Multi-Function Pin Support + * + * Copyright (C) 2007 Marvell Internation Ltd. + * + * 2007-08-21: eric miao <eric.miao@marvell.com> + * initial version + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/sysdev.h> + +#include <plat/mfp.h> + +#define MFPR_SIZE (PAGE_SIZE) + +/* MFPR register bit definitions */ +#define MFPR_PULL_SEL (0x1 << 15) +#define MFPR_PULLUP_EN (0x1 << 14) +#define MFPR_PULLDOWN_EN (0x1 << 13) +#define MFPR_SLEEP_SEL (0x1 << 9) +#define MFPR_SLEEP_OE_N (0x1 << 7) +#define MFPR_EDGE_CLEAR (0x1 << 6) +#define MFPR_EDGE_FALL_EN (0x1 << 5) +#define MFPR_EDGE_RISE_EN (0x1 << 4) + +#define MFPR_SLEEP_DATA(x) ((x) << 8) +#define MFPR_DRIVE(x) (((x) & 0x7) << 10) +#define MFPR_AF_SEL(x) (((x) & 0x7) << 0) + +#define MFPR_EDGE_NONE (0) +#define MFPR_EDGE_RISE (MFPR_EDGE_RISE_EN) +#define MFPR_EDGE_FALL (MFPR_EDGE_FALL_EN) +#define MFPR_EDGE_BOTH (MFPR_EDGE_RISE | MFPR_EDGE_FALL) + +/* + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFPR_LPM_INPUT (0) +#define MFPR_LPM_DRIVE_LOW (MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN) +#define MFPR_LPM_DRIVE_HIGH (MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN) +#define MFPR_LPM_PULL_LOW (MFPR_LPM_DRIVE_LOW | MFPR_SLEEP_OE_N) +#define MFPR_LPM_PULL_HIGH (MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N) +#define MFPR_LPM_FLOAT (MFPR_SLEEP_OE_N) +#define MFPR_LPM_MASK (0xe080) + +/* + * The pullup and pulldown state of the MFP pin at run mode is by default + * determined by the selected alternate function. In case that some buggy + * devices need to override this default behavior, the definitions below + * indicates the setting of corresponding MFPR bits + * + * Definition pull_sel pullup_en pulldown_en + * MFPR_PULL_NONE 0 0 0 + * MFPR_PULL_LOW 1 0 1 + * MFPR_PULL_HIGH 1 1 0 + * MFPR_PULL_BOTH 1 1 1 + */ +#define MFPR_PULL_NONE (0) +#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN) +#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN) +#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN) + +/* mfp_spin_lock is used to ensure that MFP register configuration + * (most likely a read-modify-write operation) is atomic, and that + * mfp_table[] is consistent + */ +static DEFINE_SPINLOCK(mfp_spin_lock); + +static void __iomem *mfpr_mmio_base; + +struct mfp_pin { + unsigned long config; /* -1 for not configured */ + unsigned long mfpr_off; /* MFPRxx Register offset */ + unsigned long mfpr_run; /* Run-Mode Register Value */ + unsigned long mfpr_l |