diff options
Diffstat (limited to 'arch/arm')
42 files changed, 300 insertions, 350 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0f441740c22a..d077ef8426df 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ + omap4-panda-a4.dtb \ omap4-panda-es.dtb \ omap4-var-som.dtb \ omap4-sdp.dtb \ @@ -131,8 +132,8 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun4i-cubieboard.dtb \ - sun5i-olinuxino.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ + sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts index b01c0d745fc5..fa04c7b18bcb 100644 --- a/arch/arm/boot/dts/imx27-3ds.dts +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -21,17 +21,17 @@ }; soc { - aipi@10000000 { /* aipi */ - + aipi@10000000 { /* aipi1 */ uart1: serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; + }; - fec@1002b000 { + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { status = "okay"; }; }; }; - }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index af50469e34b2..53b0ec0c228e 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -21,8 +21,7 @@ }; soc { - aipi@10000000 { /* aipi */ - + aipi@10000000 { /* aipi1 */ serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; @@ -38,10 +37,6 @@ status = "okay"; }; - ethernet@1002b000 { - status = "okay"; - }; - i2c@1001d000 { clock-frequency = <400000>; status = "okay"; @@ -60,6 +55,12 @@ }; }; }; + + aipi@10020000 { /* aipi2 */ + ethernet@1002b000 { + status = "okay"; + }; + }; }; nor_flash@c0000000 { diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index b8d3905915ac..5a82cb5707a8 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -55,7 +55,7 @@ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - reg = <0x10000000 0x10000000>; + reg = <0x10000000 0x20000>; ranges; wdog: wdog@10002000 { @@ -211,6 +211,15 @@ status = "disabled"; }; + }; + + aipi@10020000 { /* AIPI2 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10020000 0x20000>; + ranges; + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 77b84e17c477..9b0d07746cba 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -15,6 +15,6 @@ memory { device_type = "memory"; - reg = <0x80000000 0x84000000>; /* 64 MB */ + reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; diff --git a/arch/arm/boot/dts/sun4i-cubieboard.dts b/arch/arm/boot/dts/sun4i-cubieboard.dts index f4ca126ad994..5cab82540437 100644 --- a/arch/arm/boot/dts/sun4i-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-cubieboard.dts @@ -11,11 +11,11 @@ */ /dts-v1/; -/include/ "sun4i.dtsi" +/include/ "sun4i-a10.dtsi" / { model = "Cubietech Cubieboard"; - compatible = "cubietech,cubieboard", "allwinner,sun4i"; + compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; aliases { serial0 = &uart0; diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts index d6ff889a5d87..498a091a4ea2 100644 --- a/arch/arm/boot/dts/sun5i-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -12,11 +12,11 @@ */ /dts-v1/; -/include/ "sun5i.dtsi" +/include/ "sun5i-a13.dtsi" / { model = "Olimex A13-Olinuxino"; - compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; chosen { bootargs = "earlyprintk console=ttyS0,115200"; diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 7211772edd9d..0299915575a8 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -41,6 +41,7 @@ #include <mach/cp_intc.h> #include <mach/da8xx.h> #include <mach/mux.h> +#include <mach/sram.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h index 16026c2b1c8c..d64274fc5760 100644 --- a/arch/arm/mach-ep93xx/include/mach/uncompress.h +++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h @@ -47,13 +47,9 @@ static void __raw_writel(unsigned int value, unsigned int ptr) static inline void putc(int c) { - int i; - - for (i = 0; i < 1000; i++) { - /* Transmit fifo not full? */ - if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) - break; - } + /* Transmit fifo not full? */ + while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF) + ; __raw_writeb(c, PHYS_UART_DATA); } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index dac146df79ac..04744f9c120f 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -25,7 +25,7 @@ void exynos_init_late(void); #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else -static int exynos_pm_late_initcall(void) { return 0; } +static inline int exynos_pm_late_initcall(void) { return 0; } #endif #ifdef CONFIG_ARCH_EXYNOS4 diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index e8c0473c7568..579023f59dc1 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -319,6 +319,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, unsigned long rate_ckih1, unsigned long rate_ckih2) { int i; + u32 val; struct device_node *np; clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE); @@ -390,6 +391,21 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, imx_print_silicon_rev("i.MX51", mx51_revision()); clk_disable_unprepare(clk[iim_gate]); + /* + * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no + * longer supported. Set to one for better power saving. + * + * The effect of not setting these bits is that MIPI clocks can't be + * enabled without the IPU clock being enabled aswell. + */ + val = readl(MXC_CCM_CCDR); + val |= 1 << 18; + writel(val, MXC_CCM_CCDR); + + val = readl(MXC_CCM_CLPCR); + val |= 1 << 23; + writel(val, MXC_CCM_CLPCR); + return 0; } diff --git a/arch/arm/plat-mxc/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 508404ddd4ea..11bd01d402f2 100644 --- a/arch/arm/plat-mxc/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -6,8 +6,8 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <mach/hardware.h> -#include <mach/devices-common.h> +#include "../hardware.h" +#include "devices-common.h" #define imx_mx2_emmaprp_data_entry_single(soc) \ { \ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index be0f62bf9037..41b581fd0213 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC config SOC_HAS_REALTIME_COUNTER bool "Real time free running counter" + depends on SOC_OMAP5 + default y config ARCH_OMAP2 bool "TI OMAP2" @@ -79,7 +81,6 @@ config SOC_OMAP5 select ARM_GIC select CPU_V7 select HAVE_SMP - select SOC_HAS_REALTIME_COUNTER select COMMON_CLK comment "OMAP Core Type" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7b201546834d..bb73afc9ac17 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device sdp3430_dvi_device = { diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4be58fd071f6..f81a303b87ff 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c8e37dc00892..b3102c2f4a3c 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = CM_T35_DVI_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device cm_t35_dvi_device = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 7667eb749522..12865af25d3a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = 1, }; static struct omap_dss_device devkit8000_dvi_device = { diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 9a3878ec2256..3be1311f9e33 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,14 +27,12 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> #include <linux/mfd/menelaus.h> +#include <linux/omap-dma.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <linux/omap-dma.h> -#include <plat/debug-devices.h> - #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,11 +40,9 @@ #include "mux.h" #include "control.h" #include "gpmc.h" +#include "gpmc-smc91x.h" #define H4_FLASH_CS 0 -#define H4_SMC91X_CS 1 - -#define H4_ETHR_GPIO_IRQ 92 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) static const uint32_t board_matrix_keys[] = { @@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void) return 0; } -static inline void __init h4_init_debug(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int muxed, rate; - struct clk *gpmc_fck; - - eth_cs = H4_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 92, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, +}; +static void __init board_smc91x_init(void) +{ if (is_gpmc_muxed()) - muxed = 0x200; - else - muxed = 0; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, - 0x00011000 | muxed); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } + board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - udelay(100); + omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); + gpmc_smc91x_init(&board_smc91x_data); +} - omap_mux_init_gpio(92, 0); - if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) - gpmc_cs_free(eth_cs); +#else -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init h4_init_flash(void) { unsigned long base; @@ -371,6 +327,7 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + board_smc91x_init(); omap_display_init(&h4_dss_data); } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 54647d6286b4..3985f35aee06 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index d8638b3b4f94..53a6cbcf9747 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = DSS_ENABLE_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_stalker_dvi_device = { diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index aa56c3e5bb34..5789a5e25563 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -40,6 +40,14 @@ #define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0 #define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1 +/* + * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section + * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK + * must be set to 196.608 MHz" and hence, the DPLL locked frequency is + * half of this value. + */ +#define OMAP4_DPLL_ABE_DEFFREQ 98304000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -124,6 +132,8 @@ static struct dpll_data dpll_abe_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .m4xen_mask = OMAP4430_DPLL_REGM4XEN_MASK, + .lpmode_mask = OMAP4430_DPLL_LPMODE_EN_MASK, .max_multiplier = 2047, .max_divider = 128, .min_divider = 1, @@ -233,7 +243,7 @@ static struct dpll_data dpll_core_dd = { static const char *dpll_core_ck_parents[] = { - "sys_clkin_ck", + "sys_clkin_ck", "core_hsd_byp_clk_mux_ck" }; static struct clk dpll_core_ck; @@ -286,9 +296,9 @@ DEFINE_CLK_DIVIDER(div_core_ck, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_CLKSEL_CORE, OMAP4430_CLKSEL_CORE_SHIFT, OMAP4430_CLKSEL_CORE_WIDTH, 0x0, NULL); -DEFINE_CLK_OMAP_HSDIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", - &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, - OMAP4430_CLKSEL_0_1_MASK); +DEFINE_CLK_DIVIDER(div_iva_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, + 0x0, OMAP4430_CM_BYPCLK_DPLL_IVA, OMAP4430_CLKSEL_0_1_SHIFT, + OMAP4430_CLKSEL_0_1_WIDTH, CLK_DIVIDER_POWER_OF_TWO, NULL); DEFINE_CLK_DIVIDER(div_mpu_hs_clk, "dpll_core_m5x2_ck", &dpll_core_m5x2_ck, 0x0, OMAP4430_CM_BYPCLK_DPLL_MPU, OMAP4430_CLKSEL_0_1_SHIFT, @@ -363,8 +373,21 @@ static struct dpll_data dpll_iva_dd = { .min_divider = 1, }; +static const char *dpll_iva_ck_parents[] = { + "sys_clkin_ck", "iva_hsd_byp_clk_mux_ck" +}; + static struct clk dpll_iva_ck; +static const struct clk_ops dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .get_parent = &omap2_init_dpll_parent, +}; + static struct clk_hw_omap dpll_iva_ck_hw = { .hw = { .clk = &dpll_iva_ck, @@ -373,7 +396,7 @@ static struct clk_hw_omap dpll_iva_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_iva_ck, dpll_iva_ck_parents, dpll_ck_ops); static const char *dpll_iva_x2_ck_parents[] = { "dpll_iva_ck", @@ -416,6 +439,10 @@ static struct dpll_data dpll_mpu_dd = { .min_divider = 1, }; +static const char *dpll_mpu_ck_parents[] = { + "sys_clkin_ck", "div_mpu_hs_clk" +}; + static struct clk dpll_mpu_ck; static struct clk_hw_omap dpll_mpu_ck_hw = { @@ -426,7 +453,7 @@ static struct clk_hw_omap dpll_mpu_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_mpu_ck_parents, dpll_ck_ops); DEFINE_CLK_FIXED_FACTOR(mpu_periphclk, "dpll_mpu_ck", &dpll_mpu_ck, 0x0, 1, 2); @@ -464,6 +491,9 @@ static struct dpll_data dpll_per_dd = { .min_divider = 1, }; +static const char *dpll_per_ck_parents[] = { + "sys_clkin_ck", "per_hsd_byp_clk_mux_ck" +}; static struct clk dpll_per_ck; @@ -475,7 +505,7 @@ static struct clk_hw_omap dpll_per_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_per_ck, dpll_per_ck_parents, dpll_ck_ops); DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0, OMAP4430_CM_DIV_M2_DPLL_PER, OMAP4430_DPLL_CLKOUT_DIV_SHIFT, @@ -559,6 +589,10 @@ static struct dpll_data dpll_usb_dd = { .min_divider = 1, }; +static const char *dpll_usb_ck_parents[] = { + "sys_clkin_ck", "usb_hs_clk_div_ck" +}; + static struct clk dpll_usb_ck; static struct clk_hw_omap dpll_usb_ck_hw = { @@ -569,7 +603,7 @@ static struct clk_hw_omap dpll_usb_ck_hw = { .ops = &clkhwops_omap3_dpll, }; -DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_core_ck_parents, dpll_abe_ck_ops); +DEFINE_STRUCT_CLK(dpll_usb_ck, dpll_usb_ck_parents, dpll_ck_ops); static const char *dpll_usb_clkdcoldo_ck_parents[] = { "dpll_usb_ck", @@ -696,9 +730,13 @@ DEFINE_CLK_DIVIDER(syc_clk_div_ck, "sys_clkin_ck", &sys_clkin_ck, 0x0, OMAP4430_CM_ABE_DSS_SYS_CLKSEL, OMAP4430_CLKSEL_0_0_SHIFT, OMAP4430_CLKSEL_0_0_WIDTH, 0x0, NULL); +static const char *dbgclk_mux_ck_parents[] = { + "sys_clkin_ck" +}; + static struct clk dbgclk_mux_ck; DEFINE_STRUCT_CLK_HW_OMAP(dbgclk_mux_ck, NULL); -DEFINE_STRUCT_CLK(dbgclk_mux_ck, dpll_core_ck_parents, +DEFINE_STRUCT_CLK(dbgclk_mux_ck, dbgclk_mux_ck_parents, dpll_usb_clkdcoldo_ck_ops); /* Leaf clocks controlled by modules */ @@ -1935,10 +1973,10 @@ static struct omap_clk omap44xx_clks[] = { CLK("4803e000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48086000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), CLK("48088000.timer", "timer_sys_ck", &sys_clkin_ck, CK_443X), - CLK("49038000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), - CLK("4903e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("40138000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), + CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X), CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X), }; @@ -1955,6 +1993,7 @@ int __init omap4xxx_clk_init(void) { u32 cpu_clkflg; struct omap_clk *c; + int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; @@ -1983,5 +2022,18 @@ int __init omap4xxx_clk_init(void) omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); + /* + * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power + * state when turning the ABE clock domain. Workaround this by + * locking the ABE DPLL on boot. + */ + if (cpu_is_omap446x()) { + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); + } + return 0; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 9917f793c3b6..b40204837bd7 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -195,6 +195,10 @@ struct clksel { * @enable_mask: mask of the DPLL mode bitfield in @control_reg * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_m4xen: cache of the last M4X result of + * omap4_dpll_regm4xen_round_rate() + * @last_rounded_lpmode: cache of the last lpmode result of + * omap4_dpll_lpmode_recalc() * @max_multiplier: maximum valid non-bypass multiplier value (actual) * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() * @min_divider: minimum valid non-bypass divider value (actual) @@ -205,6 +209,8 @@ struct clksel { * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg + * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs @@ -233,6 +239,8 @@ struct dpll_data { u32 enable_mask; unsigned long last_rounded_rate; u16 last_rounded_m; + u8 last_rounded_m4xen; + u8 last_rounded_lpmode; u16 max_multiplier; u8 last_rounded_n; u8 min_divider; @@ -245,6 +253,8 @@ struct dpll_data { u32 idlest_mask; u32 dco_mask; u32 sddiv_mask; + u32 lpmode_mask; + u32 m4xen_mask; u8 auto_recal_bit; u8 recal_en_bit; u8 recal_st_bit; diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 384873580b23..7faf82d4e85c 100644 --- a/ |