diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/meson.dtsi | 75 | ||||
-rw-r--r-- | arch/arm/boot/dts/meson6-atv1200.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/meson6.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/meson8.dtsi | 124 | ||||
-rw-r--r-- | arch/arm/boot/dts/meson8b.dtsi | 50 |
5 files changed, 232 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 8d9c36970dfd..15204e44161d 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -45,6 +45,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> /include/ "skeleton.dtsi" / { @@ -78,45 +80,72 @@ #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; + hwrng: rng@8100 { + compatible = "amlogic,meson-rng"; + reg = <0x8100 0x8>; + }; + uart_A: serial@84c0 { compatible = "amlogic,meson-uart"; reg = <0x84c0 0x18>; - interrupts = <0 26 1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { compatible = "amlogic,meson-uart"; reg = <0x84dc 0x18>; - interrupts = <0 75 1>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; i2c_A: i2c@8500 { compatible = "amlogic,meson6-i2c"; reg = <0x8500 0x20>; - interrupts = <0 21 1>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + saradc: adc@8680 { + compatible = "amlogic,meson-saradc"; + reg = <0x8680 0x34>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + uart_C: serial@8700 { compatible = "amlogic,meson-uart"; reg = <0x8700 0x18>; - interrupts = <0 93 1>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; i2c_B: i2c@87c0 { compatible = "amlogic,meson6-i2c"; reg = <0x87c0 0x20>; - interrupts = <0 128 1>; + interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + usb0_phy: phy@8800 { + compatible = "amlogic,meson-mx-usb2-phy"; + #phy-cells = <0>; + reg = <0x8800 0x20>; + status = "disabled"; + }; + + usb1_phy: phy@8820 { + compatible = "amlogic,meson-mx-usb2-phy"; + #phy-cells = <0>; + reg = <0x8820 0x20>; + status = "disabled"; + }; + spifc: spi@8c80 { compatible = "amlogic,meson6-spifc"; reg = <0x8c80 0x80>; @@ -128,13 +157,13 @@ wdt: watchdog@9900 { compatible = "amlogic,meson6-wdt"; reg = <0x9900 0x8>; - interrupts = <0 0 1>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@9940 { compatible = "amlogic,meson6-timer"; reg = <0x9940 0x18>; - interrupts = <0 10 1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; }; }; @@ -148,32 +177,56 @@ ir_receiver: ir-receiver@480 { compatible= "amlogic,meson6-ir"; reg = <0x480 0x20>; - interrupts = <0 15 1>; + interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_AO: serial@4c0 { compatible = "amlogic,meson-uart"; reg = <0x4c0 0x18>; - interrupts = <0 90 1>; + interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; i2c_AO: i2c@500 { compatible = "amlogic,meson6-i2c"; reg = <0x500 0x20>; - interrupts = <0 92 1>; + interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; + usb0: usb@c9040000 { + compatible = "snps,dwc2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc9040000 0x40000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + + usb1: usb@c90c0000 { + compatible = "snps,dwc2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xc90c0000 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + ethmac: ethernet@c9410000 { compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; - interrupts = <0 8 1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts index 1237faa63ce6..9444b0d9628f 100644 --- a/arch/arm/boot/dts/meson6-atv1200.dts +++ b/arch/arm/boot/dts/meson6-atv1200.dts @@ -46,7 +46,7 @@ */ /dts-v1/; -/include/ "meson6.dtsi" +#include "meson6.dtsi" / { model = "Geniatech ATV1200"; diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi index b0fc91ffd6a1..8557b6117a4b 100644 --- a/arch/arm/boot/dts/meson6.dtsi +++ b/arch/arm/boot/dts/meson6.dtsi @@ -45,7 +45,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "meson.dtsi" +#include "meson.dtsi" / { model = "Amlogic Meson6 SoC"; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 9b0b3ddbb17e..cada35828931 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -45,7 +45,7 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8-gpio.h> -/include/ "meson.dtsi" +#include "meson.dtsi" / { model = "Amlogic Meson8 SoC"; @@ -83,6 +83,38 @@ reg = <0x203>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* 2 MiB reserved for Hardware ROM Firmware? */ + hwrom@0 { + reg = <0x0 0x200000>; + no-map; + }; + + /* + * 1 MiB reserved for the "ARM Power Firmware": this is ARM + * code which is responsible for system suspend. It loads a + * piece of ARC code ("arc_power" in the vendor u-boot tree) + * into SRAM, executes that and shuts down the (last) ARM core. + * The arc_power firmware then checks various wakeup sources + * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or + * simply the power key) and re-starts the ARM core once it + * detects a wakeup request. + */ + power-firmware@4f00000 { + reg = <0x4f00000 0x100000>; + no-map; + }; + }; + + scu@c4300000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc4300000 0x100>; + }; }; /* end of / */ &aobus { @@ -116,6 +148,20 @@ function = "i2c_mst_ao"; }; }; + + ir_recv_pins: remote { + mux { + groups = "remote_input"; + function = "remote"; + }; + }; + + pwm_f_ao_pins: pwm-f-ao { + mux { + groups = "pwm_f_ao"; + function = "pwm_f_ao"; + }; + }; }; }; @@ -144,17 +190,34 @@ gpio-ranges = <&pinctrl_cbus 0 0 120>; }; - spi_nor_pins: nor { + sd_a_pins: sd-a { mux { - groups = "nor_d", "nor_q", "nor_c", "nor_cs"; - function = "nor"; + groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", + "sd_d3_a", "sd_clk_a", "sd_cmd_a"; + function = "sd_a"; }; }; - ir_recv_pins: remote { + sd_b_pins: sd-b { mux { - groups = "remote_input"; - function = "remote"; + groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", + "sd_d3_b", "sd_clk_b", "sd_cmd_b"; + function = "sd_b"; + }; + }; + + sd_c_pins: sd-c { + mux { + groups = "sd_d0_c", "sd_d1_c", "sd_d2_c", + "sd_d3_c", "sd_clk_c", "sd_cmd_c"; + function = "sd_c"; + }; + }; + + spi_nor_pins: nor { + mux { + groups = "nor_d", "nor_q", "nor_c", "nor_cs"; + function = "nor"; }; }; @@ -168,14 +231,27 @@ function = "ethernet"; }; }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; }; }; ðmac { - clocks = <&clkc CLKID_CLK81>; + clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; }; +&hwrng { + compatible = "amlogic,meson8-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + &i2c_AO { clocks = <&clkc CLKID_CLK81>; }; @@ -194,6 +270,14 @@ arm,filter-ranges = <0x100000 0xc0000000>; }; +&saradc { + compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; + clocks = <&clkc CLKID_XTAL>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>; + clock-names = "clkin", "core", "sana"; +}; + &spifc { clocks = <&clkc CLKID_CLK81>; }; @@ -213,3 +297,27 @@ &uart_C { clocks = <&clkc CLKID_CLK81>; }; + +&usb0 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; +}; + +&usb1_phy { + compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index d9f116a418b2..72e4f425f190 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -82,6 +82,11 @@ reg = <0x203>; }; }; + + scu@c4300000 { + compatible = "arm,cortex-a5-scu"; + reg = <0xc4300000 0x100>; + }; }; /* end of / */ &aobus { @@ -171,12 +176,31 @@ }; }; +ðmac { + clocks = <&clkc CLKID_ETH>; + clock-names = "stmmaceth"; +}; + +&hwrng { + compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; +}; + &L2 { arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; arm,filter-ranges = <0x100000 0xc0000000>; }; +&saradc { + compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc"; + clocks = <&clkc CLKID_XTAL>, + <&clkc CLKID_SAR_ADC>, + <&clkc CLKID_SANA>; + clock-names = "clkin", "core", "sana"; +}; + &uart_AO { clocks = <&clkc CLKID_CLK81>; }; @@ -192,3 +216,29 @@ &uart_C { clocks = <&clkc CLKID_CLK81>; }; + +&usb0 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb1 { + compatible = "amlogic,meson8b-usb", "snps,dwc2"; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; +}; + +&usb0_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; + +&usb1_phy { + compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + resets = <&reset RESET_USB_OTG>; +}; |