diff options
Diffstat (limited to 'arch/arm64/boot')
9 files changed, 146 insertions, 42 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 4eef36b22538..88e712ea757a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -212,3 +212,7 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 22bf37404ff1..3e3eb31748a3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -271,3 +271,15 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; + +&usb2_phy0 { + /* + * even though the schematics don't show it: + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 69c721a70e44..6739697be1de 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -215,3 +215,7 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 0a0953fbc7d4..0cfd701809de 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -185,3 +185,7 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index e1a39cbed8c9..dba365ed4bd5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -20,6 +20,67 @@ no-map; }; }; + + soc { + usb0: usb@c9000000 { + status = "disabled"; + compatible = "amlogic,meson-gxl-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + clock-names = "usb_general"; + resets = <&reset RESET_USB_OTG>; + reset-names = "usb_otg"; + + dwc3: dwc3@c9000000 { + compatible = "snps,dwc3"; + reg = <0x0 0xc9000000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>; + }; + }; + }; +}; + +&apb { + usb2_phy0: phy@78000 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78000 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + status = "okay"; + }; + + usb2_phy1: phy@78020 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78020 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + status = "okay"; + }; + + usb3_phy: phy@78080 { + compatible = "amlogic,meson-gxl-usb3-phy"; + #phy-cells = <0>; + reg = <0x0 0x78080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB>, <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "phy", "peripheral"; + resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; + reset-names = "phy", "peripheral"; + status = "okay"; + }; }; ðmac { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 4fd46c1546a7..0868da476e41 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -406,3 +406,7 @@ status = "okay"; vref-supply = <&vddio_ao18>; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index d076a7c425dd..247888d68a3a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -80,6 +80,19 @@ }; }; +&apb { + usb2_phy2: phy@78040 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x78040 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + status = "okay"; + }; +}; + &clkc_AO { compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; }; @@ -100,3 +113,7 @@ &hdmi_tx { compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; }; + +&dwc3 { + phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; +}; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 2ac43221ddb6..69804c5f1197 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -56,8 +56,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; power-button { debounce_interval = <50>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi index 4b5465da81d8..8c68e0c26f1b 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi @@ -36,11 +36,11 @@ #size-cells = <1>; ranges = <0x0 0x0 0x67d00000 0x00800000>; - sata0: ahci@210000 { + sata0: ahci@0 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00210000 0x1000>; + reg = <0x00000000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -52,9 +52,9 @@ }; }; - sata_phy0: sata_phy@212100 { + sata_phy0: sata_phy@2100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00212100 0x1000>; + reg = <0x00002100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -66,11 +66,11 @@ }; }; - sata1: ahci@310000 { + sata1: ahci@10000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00310000 0x1000>; + reg = <0x00010000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -82,9 +82,9 @@ }; }; - sata_phy1: sata_phy@312100 { + sata_phy1: sata_phy@12100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00312100 0x1000>; + reg = <0x00012100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -96,11 +96,11 @@ }; }; - sata2: ahci@120000 { + sata2: ahci@20000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00120000 0x1000>; + reg = <0x00020000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -112,9 +112,9 @@ }; }; - sata_phy2: sata_phy@122100 { + sata_phy2: sata_phy@22100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00122100 0x1000>; + reg = <0x00022100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -126,11 +126,11 @@ }; }; - sata3: ahci@130000 { + sata3: ahci@30000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00130000 0x1000>; + reg = <0x00030000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -142,9 +142,9 @@ }; }; - sata_phy3: sata_phy@132100 { + sata_phy3: sata_phy@32100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00132100 0x1000>; + reg = <0x00032100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -156,11 +156,11 @@ }; }; - sata4: ahci@330000 { + sata4: ahci@100000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00330000 0x1000>; + reg = <0x00100000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -172,9 +172,9 @@ }; }; - sata_phy4: sata_phy@332100 { + sata_phy4: sata_phy@102100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00332100 0x1000>; + reg = <0x00102100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -186,11 +186,11 @@ }; }; - sata5: ahci@400000 { + sata5: ahci@110000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00400000 0x1000>; + reg = <0x00110000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -202,9 +202,9 @@ }; }; - sata_phy5: sata_phy@402100 { + sata_phy5: sata_phy@112100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00402100 0x1000>; + reg = <0x00112100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -216,11 +216,11 @@ }; }; - sata6: ahci@410000 { + sata6: ahci@120000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00410000 0x1000>; + reg = <0x00120000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -232,9 +232,9 @@ }; }; - sata_phy6: sata_phy@412100 { + sata_phy6: sata_phy@122100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00412100 0x1000>; + reg = <0x00122100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; @@ -246,11 +246,11 @@ }; }; - sata7: ahci@420000 { + sata7: ahci@130000 { compatible = "brcm,iproc-ahci", "generic-ahci"; - reg = <0x00420000 0x1000>; + reg = <0x00130000 0x1000>; reg-names = "ahci"; - interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -262,9 +262,9 @@ }; }; - sata_phy7: sata_phy@422100 { + sata_phy7: sata_phy@132100 { compatible = "brcm,iproc-sr-sata-phy"; - reg = <0x00422100 0x1000>; + reg = <0x00132100 0x1000>; reg-names = "phy"; #address-cells = <1>; #size-cells = <0>; |