diff options
Diffstat (limited to 'arch/arm/plat-samsung/gpio-samsung.c')
-rw-r--r-- | arch/arm/plat-samsung/gpio-samsung.c | 1324 |
1 files changed, 0 insertions, 1324 deletions
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c deleted file mode 100644 index 8955fd675265..000000000000 --- a/arch/arm/plat-samsung/gpio-samsung.c +++ /dev/null @@ -1,1324 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// -// Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. -// http://www.samsung.com/ -// -// Copyright 2008 Openmoko, Inc. -// Copyright 2008 Simtec Electronics -// Ben Dooks <ben@simtec.co.uk> -// http://armlinux.simtec.co.uk/ -// -// Samsung - GPIOlib support - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/ioport.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/of_address.h> - -#include <asm/irq.h> - -#include <mach/irqs.h> -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <mach/gpio-samsung.h> - -#include <plat/cpu.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <plat/pm.h> - -int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, - unsigned int off, samsung_gpio_pull_t pull) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup; - - pup = __raw_readl(reg); - pup &= ~(3 << shift); - pup |= pull << shift; - __raw_writel(pup, reg); - - return 0; -} - -samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup = __raw_readl(reg); - - pup >>= shift; - pup &= 0x3; - - return (__force samsung_gpio_pull_t)pup; -} - -int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, - unsigned int off, samsung_gpio_pull_t pull) -{ - switch (pull) { - case S3C_GPIO_PULL_NONE: - pull = 0x01; - break; - case S3C_GPIO_PULL_UP: - pull = 0x00; - break; - case S3C_GPIO_PULL_DOWN: - pull = 0x02; - break; - } - return samsung_gpio_setpull_updown(chip, off, pull); -} - -samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, - unsigned int off) -{ - samsung_gpio_pull_t pull; - - pull = samsung_gpio_getpull_updown(chip, off); - - switch (pull) { - case 0x00: - pull = S3C_GPIO_PULL_UP; - break; - case 0x01: - case 0x03: - pull = S3C_GPIO_PULL_NONE; - break; - case 0x02: - pull = S3C_GPIO_PULL_DOWN; - break; - } - - return pull; -} - -static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip, - unsigned int off, samsung_gpio_pull_t pull, - samsung_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - if (pull == updown) - pup &= ~(1 << off); - else if (pull == S3C_GPIO_PULL_NONE) - pup |= (1 << off); - else - return -EINVAL; - - __raw_writel(pup, reg); - return 0; -} - -static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip, - unsigned int off, - samsung_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : updown; -} - -samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, - unsigned int off) -{ - return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); -} - -int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, - unsigned int off, samsung_gpio_pull_t pull) -{ - return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); -} - -samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, - unsigned int off) -{ - return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); -} - -int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, - unsigned int off, samsung_gpio_pull_t pull) -{ - return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); -} - -/* - * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has two bits of configuration per gpio, which have the following - * functions: - * 00 = input - * 01 = output - * 1x = special function - */ - -static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off * 2; - u32 con; - - if (samsung_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - if (cfg > 3) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x3 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -/* - * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which - * could be directly passed back to samsung_gpio_setcfg_2bit(), from the - * S3C_GPIO_SPECIAL() macro. - */ - -static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off * 2; - con &= 3; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} - -/* - * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of functions for - * each case. - */ - -static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - if (samsung_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -/* - * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration - * register setting into a value the software can use, such as could be passed - * to samsung_gpio_setcfg_4bit(). - * - * @sa samsung_gpio_getcfg_2bit - */ - -static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - con = __raw_readl(reg); - con >>= shift; - con &= 0xf; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} - -#ifdef CONFIG_PLAT_S3C24XX -/* - * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has one bit of configuration for the gpio, where setting the bit - * means the pin is in special function mode and unset means output. - */ - -static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off; - u32 con; - - if (samsung_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - - /* Map output to 0, and SFN2 to 1 */ - cfg -= 1; - if (cfg > 1) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x1 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -/* - * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable - * GPIO configuration value. - * - * @sa samsung_gpio_getcfg_2bit - * @sa samsung_gpio_getcfg_4bit - */ - -static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off; - con &= 1; - con++; - - return S3C_GPIO_SFN(con); -} -#endif - -static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chipcfg++) { - if (!chipcfg->set_config) - chipcfg->set_config = samsung_gpio_setcfg_4bit; - if (!chipcfg->get_config) - chipcfg->get_config = samsung_gpio_getcfg_4bit; - if (!chipcfg->set_pull) - chipcfg->set_pull = samsung_gpio_setpull_updown; - if (!chipcfg->get_pull) - chipcfg->get_pull = samsung_gpio_getpull_updown; - } -} - -struct samsung_gpio_cfg s3c24xx_gpiocfg_default = { - .set_config = samsung_gpio_setcfg_2bit, - .get_config = samsung_gpio_getcfg_2bit, -}; - -#ifdef CONFIG_PLAT_S3C24XX -static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { - .set_config = s3c24xx_gpio_setcfg_abank, - .get_config = s3c24xx_gpio_getcfg_abank, -}; -#endif - -static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { - [0] = { - .cfg_eint = 0x0, - }, - [1] = { - .cfg_eint = 0x3, - }, - [2] = { - .cfg_eint = 0x7, - }, - [3] = { - .cfg_eint = 0xF, - }, - [4] = { - .cfg_eint = 0x0, - .set_config = samsung_gpio_setcfg_2bit, - .get_config = samsung_gpio_getcfg_2bit, - }, - [5] = { - .cfg_eint = 0x2, - .set_config = samsung_gpio_setcfg_2bit, - .get_config = samsung_gpio_getcfg_2bit, - }, - [6] = { - .cfg_eint = 0x3, - .set_config = samsung_gpio_setcfg_2bit, - .get_config = samsung_gpio_getcfg_2bit, - }, - [7] = { - .set_config = samsung_gpio_setcfg_2bit, - .get_config = samsung_gpio_getcfg_2bit, - }, -}; - -/* - * Default routines for controlling GPIO, based on the original S3C24XX - * GPIO functions which deal with the case where each gpio bank of the - * chip is as following: - * - * base + 0x00: Control register, 2 bits per gpio - * gpio n: 2 bits starting at (2*n) - * 00 = input, 01 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n -*/ - -static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long con; - - samsung_gpio_lock(ourchip, flags); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - - __raw_writel(con, base + 0x00); - - samsung_gpio_unlock(ourchip, flags); - return 0; -} - -static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - samsung_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= 1 << (offset * 2); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - samsung_gpio_unlock(ourchip, flags); - return 0; -} - -/* - * The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the - * state of the output. - */ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - if (ourchip->bitmap_gpio_int & BIT(offset)) - con |= 0xf << con_4bit_shift(offset); - else - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - pr_debug("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* - * The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set - * routines we store the 'base + 0x4' address so that these routines see - * the data register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - pr_debug("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned con_offset = offset; - - if (con_offset > 7) - con_offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -#ifdef CONFIG_PLAT_S3C24XX -/* The next set of routines are for the case of s3c24xx bank a */ - -static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) -{ - return -EINVAL; -} - -static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - dat = __raw_readl(base + 0x04); - - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - - __raw_writel(dat, base + 0x04); - - con &= ~(1 << offset); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); - return 0; -} -#endif - -static void samsung_gpiolib_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - - samsung_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - samsung_gpio_unlock(ourchip, flags); -} - -static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); - unsigned long val; - - val = __raw_readl(ourchip->base + 0x04); - val >>= offset; - val &= 1; - - return val; -} - -/* - * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios - * for use with the configuration calls, and other parts of the s3c gpiolib - * support code. - * - * Not all s3c support code will need this, as some configurations of cpu - * may only support one or two different configuration options and have an - * easy gpio to samsung_gpio_chip mapping function. If this is the case, then - * the machine support file should provide its own samsung_gpiolib_getchip() - * and any other necessary functions. - */ - -#ifdef CONFIG_S3C_GPIO_TRACK -struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; - -static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) -{ - unsigned int gpn; - int i; - - gpn = chip->chip.base; - for (i = 0; i < chip->chip.ngpio; i++, gpn++) { - BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); - s3c_gpios[gpn] = chip; - } -} -#endif /* CONFIG_S3C_GPIO_TRACK */ - -/* - * samsung_gpiolib_add() - add the Samsung gpio_chip. - * @chip: The chip to register - * - * This is a wrapper to gpiochip_add() that takes our specific gpio chip - * information and makes the necessary alterations for the platform and - * notes the information for use with the configuration systems and any - * other parts of the system. - */ - -static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) -{ - struct gpio_chip *gc = &chip->chip; - int ret; - - BUG_ON(!chip->base); - BUG_ON(!gc->label); - BUG_ON(!gc->ngpio); - - spin_lock_init(&chip->lock); - - if (!gc->direction_input) - gc->direction_input = samsung_gpiolib_2bit_input; - if (!gc->direction_output) - gc->direction_output = samsung_gpiolib_2bit_output; - if (!gc->set) - gc->set = samsung_gpiolib_set; - if (!gc->get) - gc->get = samsung_gpiolib_get; - -#ifdef CONFIG_PM - if (chip->pm != NULL) { - if (!chip->pm->save || !chip->pm->resume) - pr_err("gpio: %s has missing PM functions\n", - gc->label); - } else - pr_err("gpio: %s has no PM function\n", gc->label); -#endif - - /* gpiochip_add() prints own failure message on error. */ - ret = gpiochip_add_data(gc, chip); - if (ret >= 0) - s3c_gpiolib_track(chip); -} - -static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, - int nr_chips, void __iomem *base) -{ - int i; - struct gpio_chip *gc = &chip->chip; - - for (i = 0 ; i < nr_chips; i++, chip++) { - /* skip banks not present on SoC */ - if (chip->chip.base >= S3C_GPIO_END) - continue; - - if (!chip->config) - chip->config = &s3c24xx_gpiocfg_default; - if (!chip->pm) - chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); - if ((base != NULL) && (chip->base == NULL)) - chip->base = base + ((i) * 0x10); - - if (!gc->direction_input) - gc->direction_input = samsung_gpiolib_2bit_input; - if (!gc->direction_output) - gc->direction_output = samsung_gpiolib_2bit_output; - - samsung_gpiolib_add(chip); - } -} - -static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, - int nr_chips, void __iomem *base, - unsigned int offset) -{ - int i; - - for (i = 0 ; i < nr_chips; i++, chip++) { - chip->chip.direction_input = samsung_gpiolib_2bit_input; - chip->chip.direction_output = samsung_gpiolib_2bit_output; - - if (!chip->config) - chip->config = &samsung_gpio_cfgs[7]; - if (!chip->pm) - chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); - if ((base != NULL) && (chip->base == NULL)) - chip->base = base + ((i) * offset); - - samsung_gpiolib_add(chip); - } -} - -/* - * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of function - * (samsung_gpiolib_add_4bit2_chips)for each case. - */ - -static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, - int nr_chips, void __iomem *base) -{ - int i; - - for (i = 0 ; i < nr_chips; i++, chip++) { - chip->chip.direction_input = samsung_gpiolib_4bit_input; - chip->chip.direction_output = samsung_gpiolib_4bit_output; - - if (!chip->config) - chip->config = &samsung_gpio_cfgs[2]; - if (!chip->pm) - chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); - if ((base != NULL) && (chip->base == NULL)) - chip->base = base + ((i) * 0x20); - - chip->bitmap_gpio_int = 0; - - samsung_gpiolib_add(chip); - } -} - -static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - chip->chip.direction_input = samsung_gpiolib_4bit2_input; - chip->chip.direction_output = samsung_gpiolib_4bit2_output; - - if (!chip->config) - chip->config = &samsung_gpio_cfgs[2]; - if (!chip->pm) - chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); - - samsung_gpiolib_add(chip); - } -} - -int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct samsung_gpio_chip *samsung_chip = gpiochip_get_data(chip); - - return samsung_chip->irq_base + offset; -} - -#ifdef CONFIG_PLAT_S3C24XX -static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) -{ - if (offset < 4) { - if (soc_is_s3c2412()) - return IRQ_EINT0_2412 + offset; - else - return IRQ_EINT0 + offset; - } - - if (offset < 8) - return IRQ_EINT4 + offset - 4; - - return -EINVAL; -} -#endif - -#ifdef CONFIG_ARCH_S3C64XX -static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) -{ - return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; -} - -static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) -{ - return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; -} -#endif - -struct samsung_gpio_chip s3c24xx_gpios[] = { -#ifdef CONFIG_PLAT_S3C24XX - { - .config = &s3c24xx_gpiocfg_banka, - .chip = { - .base = S3C2410_GPA(0), - .owner = THIS_MODULE, - .label = "GPIOA", - .ngpio = 27, - .direction_input = s3c24xx_gpiolib_banka_input, - .direction_output = s3c24xx_gpiolib_banka_output, - }, - }, { - .chip = { - .base = S3C2410_GPB(0), - .owner = THIS_MODULE, - .label = "GPIOB", - .ngpio = 11, - }, - }, { - .chip = { - .base = S3C2410_GPC(0), - .owner = THIS_MODULE, - .label = "GPIOC", - .ngpio = 16, - }, - }, { - .chip = { - .base = S3C2410_GPD(0), - .owner = THIS_MODULE, - .label = "GPIOD", - .ngpio = 16, - }, - }, { - .chip = { - .base = S3C2410_GPE(0), - .label = "GPIOE", - .owner = THIS_MODULE, - .ngpio = 16, - }, - }, { - .chip = { - .base = S3C2410_GPF(0), - .owner = THIS_MODULE, - .label = "GPIOF", - .ngpio = 8, - .to_irq = s3c24xx_gpiolib_fbank_to_irq, - }, - }, { - .irq_base = IRQ_EINT8, - .chip = { - .base = S3C2410_GPG(0), - .owner = THIS_MODULE, - .label = "GPIOG", - .ngpio = 16, - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .chip = { - .base = S3C2410_GPH(0), - .owner = THIS_MODULE, - .label = "GPIOH", - .ngpio = 15, - }, - }, - /* GPIOS for the S3C2443 and later devices. */ - { - .base = S3C2440_GPJCON, - .chip = { - .base = S3C2410_GPJ(0), - .owner = THIS_MODULE, - .label = "GPIOJ", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPKCON, - .chip = { - .base = S3C2410_GPK(0), - .owner = THIS_MODULE, - .label = "GPIOK", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPLCON, - .chip = { - .base = S3C2410_GPL(0), - .owner = THIS_MODULE, - .label = "GPIOL", - .ngpio = 15, - }, - }, { - .base = S3C2443_GPMCON, - .chip = { - .base = S3C2410_GPM(0), - .owner = THIS_MODULE, - .label = "GPIOM", - .ngpio = 2, - }, - }, -#endif -}; - -/* - * GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 8 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 5 4Bit Yes 3 - * E 5 4Bit Yes None - * F 16 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 16 4Bit[2] No None - * L 15 4Bit[2] No None - * M 6 4Bit No IRQ_EINT - * N 16 2Bit No IRQ_EINT - * O 16 2Bit Yes 7 - * P 15 2Bit Yes 8 - * Q 9 2Bit Yes 9 - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { -#ifdef CONFIG_ARCH_S3C64XX - { - .chip = { - .base = S3C64XX_GPA(0), - .ngpio = S3C64XX_GPIO_A_NR, - .label = "GPA", - }, - }, { - .chip = { - .base = S3C64XX_GPB(0), - .ngpio = S3C64XX_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S3C64XX_GPC(0), - .ngpio = S3C64XX_GPIO_C_NR, - .label = "GPC", - }, - }, { - .chip = { - .base = S3C64XX_GPD(0), - .ngpio = S3C64XX_GPIO_D_NR, - .label = "GPD", - }, - }, { - .config = &samsung_gpio_cfgs[0], - .chip = { - .base = S3C64XX_GPE(0), - .ngpio = S3C64XX_GPIO_E_NR, - .label = "GPE", - }, - }, { - .base = S3C64XX_GPG_BASE, - .chip = { - .base = S3C64XX_GPG(0), - .ngpio = S3C64XX_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S3C64XX_GPM_BASE, - .config = &samsung_gpio_cfgs[1], - .chip = { - .base = S3C64XX_GPM(0), - .ngpio = S3C64XX_GPIO_M_NR, - .label = "GPM", - .to_irq = s3c64xx_gpiolib_mbank_to_irq, - }, - }, -#endif -}; - -static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { -#ifdef CONFIG_ARCH_S3C64XX - { - .base = S3C64XX_GPH_BASE + 0x4, - .chip = { - .base = S3C64XX_GPH(0), - .ngpio = S3C64XX_GPIO_H_NR, - .label = "GPH", - }, - }, { - .base = S3C64XX_GPK_BASE + 0x4, - .config = &samsung_gpio_cfgs[0], - .chip = { - .base = S3C64XX_GPK(0), - .ngpio = S3C64XX_GPIO_K_NR, - .label = "GPK", - }, - }, { - .base = S3C64XX_GPL_BASE + 0x4, - .config = &samsung_gpio_cfgs[1], - .chip = { - .base = S3C64XX_GPL(0), - .ngpio = S3C64XX_GPIO_L_NR, - .label = "GPL", - .to_irq = s3c64xx_gpiolib_lbank_to_irq, - }, - }, -#endif -}; - -static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { -#ifdef CONFIG_ARCH_S3C64XX - { - .base = S3C64XX_GPF_BASE, - .config = &samsung_gpio_cfgs[6], - .chip = { - .base = S3C64XX_GPF(0), - .ngpio = S3C64XX_GPIO_F_NR, - .label = "GPF", - }, - }, { - .config = &samsung_gpio_cfgs[7], - .chip = { - .base = S3C64XX_GPI(0), - .ngpio = S3C64XX_GPIO_I_NR, - .label = "GPI", - }, - }, { - .config = &samsung_gpio_cfgs[7], - .chip = { - .base = S3C64XX_GPJ(0), - .ngpio = S3C64XX_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .config = &samsung_gpio_cfgs[6], - .chip = { - .base = S3C64XX_GPO(0), - .ngpio = S3C64XX_GPIO_O_NR, - .label = "GPO", - }, - }, { - .config = &samsung_gpio_cfgs[6], - .chip = { - .base = S3C64XX_GPP(0), - .ngpio = S3C64XX_GPIO_P_NR, - .label = "GPP", - }, - }, { - .config = &samsung_gpio_cfgs[6], - .chip = { - .base = S3C64XX_GPQ(0), - .ngpio = S3C64XX_GPIO_Q_NR, - .label = "GPQ", - }, - }, { - .base = S3C64XX_GPN_BASE, - .irq_base = IRQ_EINT(0), - .config = &samsung_gpio_cfgs[5], - .chip = { - .base = S3C64XX_GPN(0), - .ngpio = S3C64XX_GPIO_N_NR, - .label = "GPN", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -#endif -}; - -/* TODO: cleanup soc_is_* */ -static __init int samsung_gpiolib_init(void) -{ - /* - * Currently there are two drivers that can provide GPIO support for - * Samsung SoCs. For device tree enabled platforms, the new - * pinctrl-samsung driver is used, providing both GPIO and pin control - * interfaces. For legacy (non-DT) platforms this driver is used. - */ - if (of_have_populated_dt()) - return 0; - - if (soc_is_s3c24xx()) { - samsung_gpiolib_set_cfg(samsung_gpio_cfgs, - ARRAY_SIZE(samsung_gpio_cfgs)); - s3c24xx_gpiolib_add_chips(s3c24xx_gpios, - ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO); - } else if (soc_is_s3c64xx()) { - samsung_gpiolib_set_cfg(samsung_gpio_cfgs, - ARRAY_SIZE(samsung_gpio_cfgs)); - samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, - ARRAY_SIZE(s3c64xx_gpios_2bit), - S3C64XX_VA_GPIO + 0xE0, 0x20); - samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, - ARRAY_SIZE(s3c64xx_gpios_4bit), - S3C64XX_VA_GPIO); - samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, - ARRAY_SIZE(s3c64xx_gpios_4bit2)); - } - - return 0; -} -core_initcall(samsung_gpiolib_init); - -int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) -{ - struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); - unsigned long flags; - int offset; - int ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - samsung_gpio_lock(chip, flags); - ret = samsung_gpio_do_setcfg(chip, offset, config); - samsung_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_cfgpin); - -int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, - unsigned int cfg) -{ - int ret; - - for (; nr > 0; nr--, start++) { - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); - -int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, samsung_gpio_pull_t pull) -{ - int ret; - - for (; nr > 0; nr--, start++) { - s3c_gpio_setpull(start, pull); - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); - -unsigned s3c_gpio_getcfg(unsigned int pin) -{ - struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); - unsigned long flags; - unsigned ret = 0; - int offset; - - if (chip) { - offset = pin - chip->chip.base; - |