summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-pxa/standby.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/standby.S')
-rw-r--r--arch/arm/mach-pxa/standby.S83
1 files changed, 83 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index d774430d02c0..167412e6bec8 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -17,6 +17,7 @@
.text
+#ifdef CONFIG_PXA27x
ENTRY(pxa_cpu_standby)
ldr r0, =PSSR
mov r1, #(PSSR_PH | PSSR_STS)
@@ -29,3 +30,85 @@ ENTRY(pxa_cpu_standby)
1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
str r1, [r0] @ make sure PSSR_PH/STS are clear
mov pc, lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define MDCNFG 0x0000
+#define MDCNFG_DMCEN (1 << 30)
+#define DDR_HCAL 0x0060
+#define DDR_HCAL_HCRNG 0x1f
+#define DDR_HCAL_HCPROG (1 << 28)
+#define DDR_HCAL_HCEN (1 << 31)
+#define DMCIER 0x0070
+#define DMCIER_EDLP (1 << 29)
+#define DMCISR 0x0078
+#define RCOMP 0x0100
+#define RCOMP_SWEVAL (1 << 31)
+
+ENTRY(pm_enter_standby_start)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG)
+ add r1, r1, #0x00100000
+
+ /*
+ * Preload the TLB entry for accessing the dynamic memory
+ * controller registers. Note that page table lookups will
+ * fail until the dynamic memory controller has been
+ * reinitialised - and that includes MMU page table walks.
+ * This also means that only the dynamic memory controller
+ * can be reliably accessed in the code following standby.
+ */
+ ldr r2, [r1] @ Dummy read MDCNFG
+
+ mcr p14, 0, r0, c7, c0, 0
+ .rept 8
+ nop
+ .endr
+
+ ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #DDR_HCAL_HCEN
+ str r0, [r1, #DDR_HCAL]
+1: ldr r0, [r1, #DDR_HCAL]
+ tst r0, #DDR_HCAL_HCEN
+ bne 1b
+
+ ldr r0, [r1, #RCOMP] @ Initiate RCOMP
+ orr r0, r0, #RCOMP_SWEVAL
+ str r0, [r1, #RCOMP]
+
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #DMCISR]
+
+ ldr r0, [r1, #DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #DMCIER_EDLP
+ str r0, [r1, #DMCIER]
+
+ ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #DDR_HCAL_HCRNG
+ orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
+ str r0, [r1, #DDR_HCAL]
+
+1: ldr r0, [r1, #DMCISR]
+ tst r0, #DMCIER_EDLP
+ beq 1b
+
+ ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN]
+ orr r0, r0, #MDCNFG_DMCEN
+ str r0, [r1, #MDCNFG]
+1: ldr r0, [r1, #MDCNFG]
+ tst r0, #MDCNFG_DMCEN
+ beq 1b
+
+ ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG]
+ orr r0, r0, #2 @ HCRNG
+ str r0, [r1, #DDR_HCAL]
+
+ ldr r0, [r1, #DMCIER] @ Clear the interrupt
+ bic r0, r0, #0x20000000
+ str r0, [r1, #DMCIER]
+
+ mov pc, lr
+ENTRY(pm_enter_standby_end)
+
+#endif