diff options
Diffstat (limited to 'arch/arm/mach-omap2')
24 files changed, 140 insertions, 482 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 0d9ce58bc464..01377c292db4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -78,7 +78,6 @@ endif omap-4-5-pm-common = omap-mpuss-lowpower.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common) -obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 6c61ecc62905..6b4f4975cf7a 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -31,8 +31,6 @@ static const struct of_device_id omap_dt_match_table[] __initconst = { static void __init __maybe_unused omap_generic_init(void) { pdata_quirks_init(omap_dt_match_table); - - omapdss_init_of(); omap_soc_device_init(); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index fbe0b78bf489..dff3750e432f 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -44,6 +44,9 @@ #define OMAP_INTC_START NR_IRQS +extern int (*omap_pm_soc_init)(void); +int omap_pm_nop_init(void); + #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP2) int omap2_pm_init(void); #else @@ -79,9 +82,12 @@ static inline int omap4_pm_init_early(void) #if defined(CONFIG_PM) && (defined(CONFIG_SOC_AM33XX) || \ defined(CONFIG_SOC_AM43XX)) -void amx3_common_pm_init(void); +int amx3_common_pm_init(void); #else -static inline void amx3_common_pm_init(void) { } +static inline int amx3_common_pm_init(void) +{ + return 0; +} #endif extern void omap2_init_common_infrastructure(void); @@ -122,14 +128,10 @@ void am43xx_init_early(void); void am43xx_init_late(void); void omap4430_init_early(void); void omap5_init_early(void); -void omap3_init_late(void); /* Do not use this one */ +void omap3_init_late(void); void omap4430_init_late(void); void omap2420_init_late(void); void omap2430_init_late(void); -void omap3430_init_late(void); -void omap35xx_init_late(void); -void omap3630_init_late(void); -void am35xx_init_late(void); void ti81xx_init_late(void); void am33xx_init_late(void); void omap5_init_late(void); @@ -350,7 +352,5 @@ extern int omap_dss_reset(struct omap_hwmod *); /* SoC specific clock initializer */ int omap_clk_init(void); -int __init omapdss_init_of(void); - #endif /* __ASSEMBLER__ */ #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index b3f6eb5d04a2..9500b6e27380 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -32,7 +32,6 @@ #include <linux/platform_data/omapdss.h> #include "omap_hwmod.h" #include "omap_device.h" -#include "omap-pm.h" #include "common.h" #include "soc.h" @@ -126,11 +125,6 @@ static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask) omap4_dsi_mux_pads(dsi_id, 0); } -static int omap_dss_set_min_bus_tput(struct device *dev, unsigned long tput) -{ - return omap_pm_set_min_bus_tput(dev, OCP_INITIATOR_AGENT, tput); -} - static enum omapdss_version __init omap_display_get_version(void) { if (cpu_is_omap24xx()) @@ -169,7 +163,6 @@ static int __init omapdss_init_fbdev(void) static struct omap_dss_board_info board_data = { .dsi_enable_pads = omap_dsi_enable_pads, .dsi_disable_pads = omap_dsi_disable_pads, - .set_min_bus_tput = omap_dss_set_min_bus_tput, }; struct device_node *node; int r; @@ -392,7 +385,7 @@ static struct device_node * __init omapdss_find_dss_of_node(void) return NULL; } -int __init omapdss_init_of(void) +static int __init omapdss_init_of(void) { int r; struct device_node *node; @@ -422,3 +415,4 @@ int __init omapdss_init_of(void) return omapdss_init_fbdev(); } +omap_device_initcall(omapdss_init_of); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index b064066d431c..0103548b0b15 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -18,7 +18,6 @@ #include "soc.h" #include "omap_device.h" -#include "omap-pm.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 91a21c3923b2..37ff25ee3d89 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -22,7 +22,6 @@ #include "soc.h" #include "omap_hwmod.h" #include "omap_device.h" -#include "omap-pm.h" #include "prm.h" #include "common.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index cf546dfe3b32..bb8e0bb7ef5d 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -37,7 +37,6 @@ #include "clock.h" #include "clock2xxx.h" #include "clock3xxx.h" -#include "omap-pm.h" #include "sdrc.h" #include "control.h" #include "serial.h" @@ -421,13 +420,6 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void) postsetup_state = _HWMOD_STATE_ENABLED; #endif omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); - - omap_pm_if_early_init(); -} - -static void __init __maybe_unused omap_common_late_init(void) -{ - omap2_common_pm_late_init(); } #ifdef CONFIG_SOC_OMAP2420 @@ -450,9 +442,7 @@ void __init omap2420_init_early(void) void __init omap2420_init_late(void) { - omap_common_late_init(); - omap2_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap2_pm_init; } #endif @@ -476,9 +466,7 @@ void __init omap2430_init_early(void) void __init omap2430_init_late(void) { - omap_common_late_init(); - omap2_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap2_pm_init; } #endif @@ -529,43 +517,12 @@ void __init am35xx_init_early(void) void __init omap3_init_late(void) { - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init omap3430_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init omap35xx_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init omap3630_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); -} - -void __init am35xx_init_late(void) -{ - omap_common_late_init(); - omap3_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap3_pm_init; } void __init ti81xx_init_late(void) { - omap_common_late_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap_pm_nop_init; } #endif @@ -621,8 +578,7 @@ void __init am33xx_init_early(void) void __init am33xx_init_late(void) { - omap_common_late_init(); - amx3_common_pm_init(); + omap_pm_soc_init = amx3_common_pm_init; } #endif @@ -645,9 +601,7 @@ void __init am43xx_init_early(void) void __init am43xx_init_late(void) { - omap_common_late_init(); - omap2_clk_enable_autoidle_all(); - amx3_common_pm_init(); + omap_pm_soc_init = amx3_common_pm_init; } #endif @@ -675,9 +629,7 @@ void __init omap4430_init_early(void) void __init omap4430_init_late(void) { - omap_common_late_init(); - omap4_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap4_pm_init; } #endif @@ -703,9 +655,7 @@ void __init omap5_init_early(void) void __init omap5_init_late(void) { - omap_common_late_init(); - omap4_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap4_pm_init; } #endif @@ -728,9 +678,7 @@ void __init dra7xx_init_early(void) void __init dra7xx_init_late(void) { - omap_common_late_init(); - omap4_pm_init(); - omap2_clk_enable_autoidle_all(); + omap_pm_soc_init = omap4_pm_init; } #endif diff --git a/arch/arm/mach-omap2/omap-pm-noop.c b/arch/arm/mach-omap2/omap-pm-noop.c deleted file mode 100644 index 4ead077ea4e7..000000000000 --- a/arch/arm/mach-omap2/omap-pm-noop.c +++ /dev/null @@ -1,176 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * omap-pm-noop.c - OMAP power management interface - dummy version - * - * This code implements the OMAP power management interface to - * drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for - * debug/demonstration use, as it does nothing but printk() whenever a - * function is called (when DEBUG is defined, below) - * - * Copyright (C) 2008-2009 Texas Instruments, Inc. - * Copyright (C) 2008-2009 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): - * Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan - * Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff - */ - -#undef DEBUG - -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/device.h> -#include <linux/platform_device.h> - -#include "omap_device.h" -#include "omap-pm.h" - -static bool off_mode_enabled; -static int dummy_context_loss_counter; - -/* - * Device-driver-originated constraints (via board-*.c files) - */ - -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) -{ - if (!dev || t < -1) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (t == -1) - pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", - dev_name(dev)); - else - pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n", - dev_name(dev), t); - - /* - * For current Linux, this needs to map the MPU to a - * powerdomain, then go through the list of current max lat - * constraints on the MPU and find the smallest. If - * the latency constraint has changed, the code should - * recompute the state to enter for the next powerdomain - * state. - * - * TI CDP code can call constraint_set here. - */ - - return 0; -} - -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) -{ - if (!dev || (agent_id != OCP_INITIATOR_AGENT && - agent_id != OCP_TARGET_AGENT)) { - WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); - return -EINVAL; - } - - if (r == 0) - pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", - dev_name(dev), agent_id); - else - pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n", - dev_name(dev), agent_id, r); - - /* - * This code should model the interconnect and compute the - * required clock frequency, convert that to a VDD2 OPP ID, then - * set the VDD2 OPP appropriately. - * - * TI CDP code can call constraint_set here on the VDD2 OPP. - */ - - return 0; -} - -/* - * DSP Bridge-specific constraints - */ - - -/** - * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been enabled. - */ -void omap_pm_enable_off_mode(void) -{ - off_mode_enabled = true; -} - -/** - * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled - * - * Intended for use only by OMAP PM core code to notify this layer - * that off mode has been disabled. - */ -void omap_pm_disable_off_mode(void) -{ - off_mode_enabled = false; -} - -/* - * Device context loss tracking - */ - -#ifdef CONFIG_ARCH_OMAP2PLUS - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - int count; - - if (WARN_ON(!dev)) - return -ENODEV; - - if (dev->pm_domain == &omap_device_pm_domain) { - count = omap_device_get_context_loss_count(pdev); - } else { - WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", - dev_name(dev)); - - count = dummy_context_loss_counter; - - if (off_mode_enabled) { - count++; - /* - * Context loss count has to be a non-negative value. - * Clear the sign bit to get a value range from 0 to - * INT_MAX. - */ - count &= INT_MAX; - dummy_context_loss_counter = count; - } - } - - pr_debug("OMAP PM: context loss count for dev %s = %d\n", - dev_name(dev), count); - - return count; -} - -#else - -int omap_pm_get_dev_context_loss_count(struct device *dev) -{ - return dummy_context_loss_counter; -} - -#endif - -/* Should be called before clk framework init */ -int __init omap_pm_if_early_init(void) -{ - return 0; -} - -/* Must be called after clock framework is initialized */ -int __init omap_pm_if_init(void) -{ - return 0; -} diff --git a/arch/arm/mach-omap2/omap-pm.h b/arch/arm/mach-omap2/omap-pm.h deleted file mode 100644 index 5ba5df47f91b..000000000000 --- a/arch/arm/mach-omap2/omap-pm.h +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * omap-pm.h - OMAP power management interface - * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation - * Paul Walmsley - * - * Interface developed by (in alphabetical order): Karthik Dasu, Jouni - * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa, - * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, - * Richard Woodruff - */ - -#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H -#define ASM_ARM_ARCH_OMAP_OMAP_PM_H - -#include <linux/device.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/pm_opp.h> - -/* - * agent_id values for use with omap_pm_set_min_bus_tput(): - * - * OCP_INITIATOR_AGENT is only valid for devices that can act as - * initiators -- it represents the device's L3 interconnect - * connection. OCP_TARGET_AGENT represents the device's L4 - * interconnect connection. - */ -#define OCP_TARGET_AGENT 1 -#define OCP_INITIATOR_AGENT 2 - -/** - * omap_pm_if_early_init - OMAP PM init code called before clock fw init - * @mpu_opp_table: array ptr to struct omap_opp for MPU - * @dsp_opp_table: array ptr to struct omap_opp for DSP - * @l3_opp_table : array ptr to struct omap_opp for CORE - * - * Initialize anything that must be configured before the clock - * framework starts. The "_if_" is to avoid name collisions with the - * PM idle-loop code. - */ -int __init omap_pm_if_early_init(void); - -/** - * omap_pm_if_init - OMAP PM init code called after clock fw init - * - * The main initialization code. OPP tables are passed in here. The - * "_if_" is to avoid name collisions with the PM idle-loop code. - */ -int __init omap_pm_if_init(void); - -/* - * Device-driver-originated constraints (via board-*.c files, platform_data) - */ - - -/** - * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency - * @dev: struct device * requesting the constraint - * @t: maximum MPU wakeup latency in microseconds - * - * Request that the maximum interrupt latency for the MPU to be no - * greater than @t microseconds. "Interrupt latency" in this case is - * defined as the elapsed time from the occurrence of a hardware or - * timer interrupt to the time when the device driver's interrupt - * service routine has been entered by the MPU. - * - * It is intended that underlying PM code will use this information to - * determine what power state to put the MPU powerdomain into, and - * possibly the CORE powerdomain as well, since interrupt handling - * code currently runs from SDRAM. Advanced PM or board*.c code may - * also configure interrupt controller priorities, OCP bus priorities, - * CPU speed(s), etc. - * - * This function will not affect device wakeup latency, e.g., time - * elapsed from when a device driver enables a hardware device with - * clk_enable(), to when the device is ready for register access or - * other use. To control this device wakeup latency, use - * omap_pm_set_max_dev_wakeup_lat() - * - * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the - * previous t value. To remove the latency target for the MPU, call - * with t = -1. - * - * XXX This constraint will be deprecated soon in favor of the more - * general omap_pm_set_max_dev_wakeup_lat() - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t); - - -/** - * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device - * @dev: struct device * requesting the constraint - * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT) - * @r: minimum throughput (in KiB/s) - * - * Request that the minimum data throughput on the OCP interconnect - * attached to device @dev interconnect agent @tbus_id be no less - * than @r KiB/s. - * - * It is expected that the OMAP PM or bus code will use this - * information to set the interconnect clock to run at the lowest - * possible speed that satisfies all current system users. The PM or - * bus code will adjust the estimate based on its model of the bus, so - * device driver authors should attempt to specify an accurate - * quantity for their device use case, and let the PM or bus code - * overestimate the numbers as necessary to handle request/response - * latency, other competing users on the system, etc. On OMAP2/3, if - * a driver requests a minimum L4 interconnect speed constraint, the - * code will also need to add an minimum L3 interconnect speed - * constraint, - * - * Multiple calls to omap_pm_set_min_bus_tput() will replace the - * previous rate value for this device. To remove the interconnect - * throughput restriction for this device, call with r = 0. - * - * Returns -EINVAL for an invalid argument, -ERANGE if the constraint - * is not satisfiable, or 0 upon success. - */ -int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r); - - -/* - * CPUFreq-originated constraint - * - * In the future, this should be handled by custom OPP clocktype - * functions. - */ - - -/* - * Device context loss tracking - */ - -/** - * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx - * @dev: struct device * - * - * This function returns the number of times that the device @dev has - * lost its internal context. This generally occurs on a powerdomain - * transition to OFF. Drivers use this as an optimization to avoid restoring - * context if the device hasn't lost it. To use, drivers should initially - * call this in their context save functions and store the result. Early in - * the driver's context restore function, the driver should call this function - * again, and compare the result to the stored counter. If they differ, the - * driver must restore device context. If the number of context losses - * exceeds the maximum positive integer, the function will wrap to 0 and - * continue counting. Returns the number of context losses for this device, - * or negative value upon error. - */ -int omap_pm_get_dev_context_loss_count(struct device *dev); - -void omap_pm_enable_off_mode(void); -void omap_pm_disable_off_mode(void); - -#endif diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 3b829a50d1db..ac219b9e6a4c 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -143,7 +143,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct resource res; const char *oh_name; int oh_cnt, i, ret = 0; - bool device_active = false; + bool device_active = false, skip_pm_domain = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -151,8 +151,15 @@ static int omap_device_build_from_dt(struct platform_device *pdev) return -ENODEV; } + /* SDMA still needs special handling for omap_device_build() */ + ret = of_property_read_string_index(node, "ti,hwmods", 0, &oh_name); + if (!ret && (!strncmp("dma_system", oh_name, 10) || + !strncmp("dma", oh_name, 3))) + skip_pm_domain = true; + /* Use ti-sysc driver instead of omap_device? */ - if (!omap_hwmod_parse_module_range(NULL, node, &res)) + if (!skip_pm_domain && + !omap_hwmod_parse_module_range(NULL, node, &res)) return -ENODEV; hwmods = kzalloc(sizeof(struct omap_hwmod *) * oh_cnt, GFP_KERNEL); @@ -191,11 +198,12 @@ static int omap_device_build_from_dt(struct platform_device *pdev) r->name = dev_name(&pdev->dev); } - dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); - - if (device_active) { - omap_device_enable(pdev); - pm_runtime_set_active(&pdev->dev); + if (!skip_pm_domain) { + dev_pm_domain_set(&pdev->dev, &omap_device_pm_domain); + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } } odbfd_exit1: diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index e7d23e200ecc..2ceffd85dd3d 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -481,7 +481,7 @@ static int _wait_softreset_complete(struct omap_hwmod *oh) sysc = oh->class->sysc; - if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS && sysc->syss_offs > 0) omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) & SYSS_RESETDONE_MASK), MAX_MODULE_SOFTRESET_WAIT, c); @@ -3171,19 +3171,19 @@ static int omap_hwmod_init_regbits(struct device *dev, */ int omap_hwmod_init_reg_offs(struct device *dev, const struct ti_sysc_module_data *data, - u32 *rev_offs, u32 *sysc_offs, u32 *syss_offs) + s32 *rev_offs, s32 *sysc_offs, s32 *syss_offs) { - *rev_offs = 0; + *rev_offs = -ENODEV; *sysc_offs = 0; *syss_offs = 0; - if (data->offsets[SYSC_REVISION] > 0) + if (data->offsets[SYSC_REVISION] >= 0) *rev_offs = data->offsets[SYSC_REVISION]; - if (data->offsets[SYSC_SYSCONFIG] > 0) + if (data->offsets[SYSC_SYSCONFIG] >= 0) *sysc_offs = data->offsets[SYSC_SYSCONFIG]; - if (data->offsets[SYSC_SYSSTATUS] > 0) + if (data->offsets[SYSC_SYSSTATUS] >= 0) *syss_offs = data->offsets[SYSC_SYSSTATUS]; return 0; @@ -3312,8 +3312,8 @@ static int omap_hwmod_check_module(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits *sysc_fields, - u32 rev_offs, u32 sysc_offs, - u32 syss_offs, u32 sysc_flags, + s32 rev_offs, s32 sysc_offs, + s32 syss_offs, u32 sysc_flags, u32 idlemodes) { if (!oh->class->sysc) @@ -3365,7 +3365,7 @@ static int omap_hwmod_check_module(struct device *dev, int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh, const struct ti_sysc_module_data *data, struct sysc_regbits *sysc_fields, - u32 rev_offs, u32 sysc_offs, u32 syss_offs, + s32 rev_offs, s32 sysc_offs, s32 syss_offs, u32 sysc_flags, u32 idlemodes) { struct omap_hwmod_class_sysconfig *sysc; @@ -3425,7 +3425,8 @@ int omap_hwmod_init_module(struct device *dev, { struct omap_hwmod *oh; struct sysc_regbits *sysc_fields; - u32 rev_offs, sysc_offs, syss_offs, sysc_flags, idlemodes; + s32 rev_offs, sysc_offs, syss_offs; + u32 sysc_flags, idlemodes; int error; if (!dev || !data) diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index c7122abbf977..b70cdc21f8a2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -317,9 +317,9 @@ struct omap_hwmod_ocp_if { * then this field has to be populated with the correct offset structure. */ struct omap_hwmod_class_sysconfig { - u32 rev_offs; - u32 sysc_offs; - u32 syss_offs; + s32 rev_offs; + s32 sysc_offs; + s32 syss_offs; u16 sysc_flags; struct sysc_regbits *sysc_fields; u8 srst_udelay; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 5efe91c6e95b..9ded7bf972e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -629,6 +629,7 @@ struct omap_hwmod am33xx_gpmc_hwmod = { /* 'i2c' class */ static struct omap_hwmod_class_sysconfig am33xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 23336b6c7125..d93f9ea4119e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -885,6 +885,7 @@ static struct omap_hwmod omap3xxx_dma_system_hwmod = { */ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x008c, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), @@ -990,6 +991,7 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { /* 'mcbsp sidetone' class */ static struct omap_hwmod_class_sysconfig omap3xxx_mcbsp_sidetone_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x0010, .sysc_flags = SYSC_HAS_AUTOIDLE, .sysc_fields = &omap_hwmod_sysc_type1, @@ -1018,6 +1020,7 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { /* SR common */ static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x24, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE), .sysc_fields = &omap34xx_sr_sysc_fields, @@ -1030,6 +1033,7 @@ static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = { }; static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x38, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP | diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 5f73b730d4fc..aa271ac5ebac 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -378,6 +378,7 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = { }; static struct omap_hwmod_class_sysconfig am43xx_qspi_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index e4f8ae9cd637..234ee0eec815 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1360,6 +1360,7 @@ static struct omap_hwmod omap44xx_hsi_hwmod = { */ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | @@ -1634,6 +1635,7 @@ static struct omap_hwmod omap44xx_mailbox_hwmod = { /* The IP is not compliant to type1 / type2 scheme */ static struct omap_hwmod_class_sysconfig omap44xx_mcasp_sysc = { + .rev_offs = 0, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | @@ -1667,6 +1669,7 @@ static struct omap_hwmod omap44xx_mcasp_hwmod = { */ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x008c, .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), @@ -2353,6 +2356,7 @@ static struct omap_hwmod omap44xx_slimbus2_hwmod = { /* The IP is not compliant to type1 / type2 scheme */ static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x0038, .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index c72cd84b07ec..887a30fa775b 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -804,6 +804,7 @@ static struct omap_hwmod omap54xx_gpio8_hwmod = { */ static struct omap_hwmod_class_sysconfig omap54xx_i2c_sysc = { + .rev_offs = 0, .sysc_offs = 0x0010, .syss_offs = 0x0090, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | @@ -974,6 +975,7 @@ static struct omap_hwmod omap54xx_mailbox_hwmod = { */ static struct omap_hwmod_class_sysconfig omap54xx_mcbsp_sysc = { + .rev_offs = -ENODEV, .sysc_offs = 0x008c, |