summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-exynos4/platsmp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-exynos4/platsmp.c')
-rw-r--r--arch/arm/mach-exynos4/platsmp.c57
1 files changed, 55 insertions, 2 deletions
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index b68d5bdf04cf..7c2282c6ba81 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -28,9 +28,12 @@
#include <mach/hardware.h>
#include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
extern void exynos4_secondary_startup(void);
+#define CPU1_BOOT_REG S5P_VA_SYSRAM
+
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
@@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(boot_lock);
+static void __cpuinit exynos4_gic_secondary_init(void)
+{
+ void __iomem *dist_base = S5P_VA_GIC_DIST +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ void __iomem *cpu_base = S5P_VA_GIC_CPU +
+ (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+ int i;
+
+ /*
+ * Deal with the banked PPI and SGI interrupts - disable all
+ * PPI interrupts, ensure all SGI interrupts are enabled.
+ */
+ __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+ __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+ /*
+ * Set priority on PPI and SGI interrupts
+ */
+ for (i = 0; i < 32; i += 4)
+ __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+ __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ __raw_writel(1, cpu_base + GIC_CPU_CTRL);
+}
+
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/*
@@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_secondary_init(0);
+ exynos4_gic_secondary_init();
/*
* let the primary processor know we're out of the
@@ -100,16 +128,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu);
+ if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+ __raw_writel(S5P_CORE_LOCAL_PWR_EN,
+ S5P_ARM_CORE1_CONFIGURATION);
+
+ timeout = 10;
+
+ /* wait max 10 ms until cpu1 is on */
+ while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+ & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+ if (timeout-- == 0)
+ break;
+
+ mdelay(1);
+ }
+
+ if (timeout == 0) {
+ printk(KERN_ERR "cpu1 power enable failed");
+ spin_unlock(&boot_lock);
+ return -ETIMEDOUT;
+ }
+ }
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 1);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
smp_rmb();
+
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ CPU1_BOOT_REG);
+ gic_raise_softirq(cpumask_of(cpu), 1);
+
if (pen_release == -1)
break;