diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/networking/device_drivers/index.rst | 1 | ||||
-rw-r--r-- | Documentation/networking/device_drivers/intel/ipw2200.rst (renamed from Documentation/networking/device_drivers/intel/ipw2200.txt) | 414 |
2 files changed, 235 insertions, 180 deletions
diff --git a/Documentation/networking/device_drivers/index.rst b/Documentation/networking/device_drivers/index.rst index 54ed10f3d1a7..f9ce0089ec7d 100644 --- a/Documentation/networking/device_drivers/index.rst +++ b/Documentation/networking/device_drivers/index.rst @@ -40,6 +40,7 @@ Contents: freescale/dpaa freescale/gianfar intel/ipw2100 + intel/ipw2200 .. only:: subproject and html diff --git a/Documentation/networking/device_drivers/intel/ipw2200.txt b/Documentation/networking/device_drivers/intel/ipw2200.rst index b7658bed4906..0cb42d2fd7e5 100644 --- a/Documentation/networking/device_drivers/intel/ipw2200.txt +++ b/Documentation/networking/device_drivers/intel/ipw2200.rst @@ -1,8 +1,15 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> -Intel(R) PRO/Wireless 2915ABG Driver for Linux in support of: +============================================== +Intel(R) PRO/Wireless 2915ABG Driver for Linux +============================================== -Intel(R) PRO/Wireless 2200BG Network Connection -Intel(R) PRO/Wireless 2915ABG Network Connection + +Support for: + +- Intel(R) PRO/Wireless 2200BG Network Connection +- Intel(R) PRO/Wireless 2915ABG Network Connection Note: The Intel(R) PRO/Wireless 2915ABG Driver for Linux and Intel(R) PRO/Wireless 2200BG Driver for Linux is a unified driver that works on @@ -10,37 +17,37 @@ both hardware adapters listed above. In this document the Intel(R) PRO/Wireless 2915ABG Driver for Linux will be used to reference the unified driver. -Copyright (C) 2004-2006, Intel Corporation +Copyright |copy| 2004-2006, Intel Corporation README.ipw2200 -Version: 1.1.2 -Date : March 30, 2006 +:Version: 1.1.2 +:Date: March 30, 2006 -Index ------------------------------------------------ -0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER -1. Introduction -1.1. Overview of features -1.2. Module parameters -1.3. Wireless Extension Private Methods -1.4. Sysfs Helper Files -1.5. Supported channels -2. Ad-Hoc Networking -3. Interacting with Wireless Tools -3.1. iwconfig mode -3.2. iwconfig sens -4. About the Version Numbers -5. Firmware installation -6. Support -7. License +.. Index + 0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER + 1. Introduction + 1.1. Overview of features + 1.2. Module parameters + 1.3. Wireless Extension Private Methods + 1.4. Sysfs Helper Files + 1.5. Supported channels + 2. Ad-Hoc Networking + 3. Interacting with Wireless Tools + 3.1. iwconfig mode + 3.2. iwconfig sens + 4. About the Version Numbers + 5. Firmware installation + 6. Support + 7. License -0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER ------------------------------------------------ -Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! +0. IMPORTANT INFORMATION BEFORE USING THIS DRIVER +================================================= + +Important Notice FOR ALL USERS OR DISTRIBUTORS!!!! Intel wireless LAN adapters are engineered, manufactured, tested, and quality checked to ensure that they meet all necessary local and @@ -56,7 +63,7 @@ product is granted. Intel's wireless LAN's EEPROM, firmware, and software driver are designed to carefully control parameters that affect radio operation and to ensure electromagnetic compliance (EMC). These parameters include, without limitation, RF power, spectrum usage, -channel scanning, and human exposure. +channel scanning, and human exposure. For these reasons Intel cannot permit any manipulation by third parties of the software provided in binary format with the wireless WLAN @@ -70,7 +77,7 @@ no liability, under any theory of liability for any issues associated with the modified products, including without limitation, claims under the warranty and/or issues arising from regulatory non-compliance, and (iii) Intel will not provide or be required to assist in providing -support to any third parties for such modified products. +support to any third parties for such modified products. Note: Many regulatory agencies consider Wireless LAN adapters to be modules, and accordingly, condition system-level regulatory approval @@ -78,23 +85,24 @@ upon receipt and review of test data documenting that the antennas and system configuration do not cause the EMC and radio operation to be non-compliant. -The drivers available for download from SourceForge are provided as a -part of a development project. Conformance to local regulatory -requirements is the responsibility of the individual developer. As -such, if you are interested in deploying or shipping a driver as part of -solution intended to be used for purposes other than development, please +The drivers available for download from SourceForge are provided as a +part of a development project. Conformance to local regulatory +requirements is the responsibility of the individual developer. As +such, if you are interested in deploying or shipping a driver as part of +solution intended to be used for purposes other than development, please obtain a tested driver from Intel Customer Support at: http://support.intel.com -1. Introduction ------------------------------------------------ -The following sections attempt to provide a brief introduction to using +1. Introduction +=============== + +The following sections attempt to provide a brief introduction to using the Intel(R) PRO/Wireless 2915ABG Driver for Linux. -This document is not meant to be a comprehensive manual on -understanding or using wireless technologies, but should be sufficient +This document is not meant to be a comprehensive manual on +understanding or using wireless technologies, but should be sufficient to get you moving without wires on Linux. For information on building and installing the driver, see the INSTALL @@ -102,14 +110,14 @@ file. 1.1. Overview of Features ------------------------------------------------ +------------------------- The current release (1.1.2) supports the following features: + BSS mode (Infrastructure, Managed) + IBSS mode (Ad-Hoc) + WEP (OPEN and SHARED KEY mode) + 802.1x EAP via wpa_supplicant and xsupplicant -+ Wireless Extension support ++ Wireless Extension support + Full B and G rate support (2200 and 2915) + Full A rate support (2915 only) + Transmit power control @@ -122,102 +130,107 @@ supported: + long/short preamble support + Monitor mode (aka RFMon) -The distinction between officially supported and enabled is a reflection +The distinction between officially supported and enabled is a reflection on the amount of validation and interoperability testing that has been -performed on a given feature. +performed on a given feature. 1.2. Command Line Parameters ------------------------------------------------ +---------------------------- Like many modules used in the Linux kernel, the Intel(R) PRO/Wireless -2915ABG Driver for Linux allows configuration options to be provided -as module parameters. The most common way to specify a module parameter -is via the command line. +2915ABG Driver for Linux allows configuration options to be provided +as module parameters. The most common way to specify a module parameter +is via the command line. -The general form is: +The general form is:: -% modprobe ipw2200 parameter=value + % modprobe ipw2200 parameter=value Where the supported parameter are: associate Set to 0 to disable the auto scan-and-associate functionality of the - driver. If disabled, the driver will not attempt to scan - for and associate to a network until it has been configured with - one or more properties for the target network, for example configuring + driver. If disabled, the driver will not attempt to scan + for and associate to a network until it has been configured with + one or more properties for the target network, for example configuring the network SSID. Default is 0 (do not auto-associate) - + Example: % modprobe ipw2200 associate=0 auto_create - Set to 0 to disable the auto creation of an Ad-Hoc network - matching the channel and network name parameters provided. + Set to 0 to disable the auto creation of an Ad-Hoc network + matching the channel and network name parameters provided. Default is 1. channel channel number for association. The normal method for setting - the channel would be to use the standard wireless tools - (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes + the channel would be to use the standard wireless tools + (i.e. `iwconfig eth1 channel 10`), but it is useful sometimes to set this while debugging. Channel 0 means 'ANY' debug If using a debug build, this is used to control the amount of debug info is logged. See the 'dvals' and 'load' script for more info on - how to use this (the dvals and load scripts are provided as part - of the ipw2200 development snapshot releases available from the + how to use this (the dvals and load scripts are provided as part + of the ipw2200 development snapshot releases available from the SourceForge project at http://ipw2200.sf.net) - + led Can be used to turn on experimental LED code. 0 = Off, 1 = On. Default is 1. mode - Can be used to set the default mode of the adapter. + Can be used to set the default mode of the adapter. 0 = Managed, 1 = Ad-Hoc, 2 = Monitor 1.3. Wireless Extension Private Methods ------------------------------------------------ +--------------------------------------- -As an interface designed to handle generic hardware, there are certain -capabilities not exposed through the normal Wireless Tool interface. As -such, a provision is provided for a driver to declare custom, or -private, methods. The Intel(R) PRO/Wireless 2915ABG Driver for Linux +As an interface designed to handle generic hardware, there are certain +capabilities not exposed through the normal Wireless Tool interface. As +such, a provision is provided for a driver to declare custom, or +private, methods. The Intel(R) PRO/Wireless 2915ABG Driver for Linux defines several of these to configure various settings. -The general form of using the private wireless methods is: +The general form of using the private wireless methods is:: % iwpriv $IFNAME method parameters -Where $IFNAME is the interface name the device is registered with +Where $IFNAME is the interface name the device is registered with (typically eth1, customized via one of the various network interface name managers, such as ifrename) The supported private methods are: get_mode - Can be used to report out which IEEE mode the driver is + Can be used to report out which IEEE mode the driver is configured to support. Example: - + % iwpriv eth1 get_mode eth1 get_mode:802.11bg (6) set_mode - Can be used to configure which IEEE mode the driver will - support. + Can be used to configure which IEEE mode the driver will + support. + + Usage:: + + % iwpriv eth1 set_mode {mode} - Usage: - % iwpriv eth1 set_mode {mode} Where {mode} is a number in the range 1-7: + + == ===================== 1 802.11a (2915 only) 2 802.11b 3 802.11ab (2915 only) - 4 802.11g + 4 802.11g 5 802.11ag (2915 only) 6 802.11bg 7 802.11abg (2915 only) + == ===================== get_preamble Can be used to report configuration of preamble length. @@ -225,99 +238,123 @@ The supported private methods are: set_preamble Can be used to set the configuration of preamble length: - Usage: - % iwpriv eth1 set_preamble {mode} + Usage:: + + % iwpriv eth1 set_preamble {mode} + Where {mode} is one of: + + == ======================================== 1 Long preamble only 0 Auto (long or short based on connection) - + == ======================================== + -1.4. Sysfs Helper Files: ------------------------------------------------ +1.4. Sysfs Helper Files +----------------------- -The Linux kernel provides a pseudo file system that can be used to +The Linux kernel provides a pseudo file system that can be used to access various components of the operating system. The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes several configuration parameters through this mechanism. -An entry in the sysfs can support reading and/or writing. You can -typically query the contents of a sysfs entry through the use of cat, -and can set the contents via echo. For example: +An entry in the sysfs can support reading and/or writing. You can +typically query the contents of a sysfs entry through the use of cat, +and can set the contents via echo. For example:: -% cat /sys/bus/pci/drivers/ipw2200/debug_level + % cat /sys/bus/pci/drivers/ipw2200/debug_level -Will report the current debug level of the driver's logging subsystem +Will report the current debug level of the driver's logging subsystem (only available if CONFIG_IPW2200_DEBUG was configured when the driver was built). -You can set the debug level via: +You can set the debug level via:: -% echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level + % echo $VALUE > /sys/bus/pci/drivers/ipw2200/debug_level -Where $VALUE would be a number in the case of this sysfs entry. The -input to sysfs files does not have to be a number. For example, the -firmware loader used by hotplug utilizes sysfs entries for transferring +Where $VALUE would be a number in the case of this sysfs entry. The +input to sysfs files does not have to be a number. For example, the +firmware loader used by hotplug utilizes sysfs entries for transferring the firmware image from user space into the driver. -The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries -at two levels -- driver level, which apply to all instances of the driver -(in the event that there are more than one device installed) and device +The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries +at two levels -- driver level, which apply to all instances of the driver +(in the event that there are more than one device installed) and device level, which applies only to the single specific instance. 1.4.1 Driver Level Sysfs Helper Files ------------------------------------------------ +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ For the driver level files, look in /sys/bus/pci/drivers/ipw2200/ - debug_level - + debug_level This controls the same global as the 'debug' module parameter 1.4.2 Device Level Sysfs Helper Files ------------------------------------------------ +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +For the device level files, look in:: -For the device level files, look in - /sys/bus/pci/drivers/ipw2200/{PCI-ID}/ -For example: +For example::: + /sys/bus/pci/drivers/ipw2200/0000:02:01.0 For the device level files, see /sys/bus/pci/drivers/ipw2200: rf_kill - read - - 0 = RF kill not enabled (radio on) - 1 = SW based RF kill active (radio off) - 2 = HW based RF kill active (radio off) - 3 = Both HW and SW RF kill active (radio off) + read - + + == ========================================= + 0 RF kill not enabled (radio on) + 1 SW based RF kill active (radio off) + 2 HW based RF kill active (radio off) + 3 Both HW and SW RF kill active (radio off) + == ========================================= + write - - 0 = If SW based RF kill active, turn the radio back on - 1 = If radio is on, activate SW based RF kill - NOTE: If you enable the SW based RF kill and then toggle the HW - based RF kill from ON -> OFF -> ON, the radio will NOT come back on - - ucode + == ================================================== + 0 If SW based RF kill active, turn the radio back on + 1 If radio is on, activate SW based RF kill + == ================================================== + + .. note:: + + If you enable the SW based RF kill and then toggle the HW + based RF kill from ON -> OFF -> ON, the radio will NOT come back on + + ucode read-only access to the ucode version number led read - - 0 = LED code disabled - 1 = LED code enabled + + == ================= + 0 LED code disabled + 1 LED code enabled + == ================= + write - - 0 = Disable LED code - 1 = Enable LED code - NOTE: The LED code has been reported to hang some systems when - running ifconfig and is therefore disabled by default. + == ================ + 0 Disable LED code + 1 Enable LED code + == ================ + + + .. note:: + + The LED code has been reported to hang some systems when + running ifconfig and is therefore disabled by default. 1.5. Supported channels ------------------------------------------------ +----------------------- Upon loading the Intel(R) PRO/Wireless 2915ABG Driver for Linux, a message stating the detected geography code and the number of 802.11 @@ -326,44 +363,59 @@ channels supported by the card will be displayed in the log. The geography code corresponds to a regulatory domain as shown in the table below. - Supported channels -Code Geography 802.11bg 802.11a - ---- Restricted 11 0 -ZZF Custom US/Canada 11 8 -ZZD Rest of World 13 0 -ZZA Custom USA & Europe & High 11 13 -ZZB Custom NA & Europe 11 13 -ZZC Custom Japan 11 4 -ZZM Custom 11 0 -ZZE Europe 13 19 -ZZJ Custom Japan 14 4 -ZZR Rest of World 14 0 -ZZH High Band 13 4 -ZZG Custom Europe 13 4 -ZZK Europe 13 24 -ZZL Europe 11 13 - - -2. Ad-Hoc Networking ------------------------------------------------ - -When using a device in an Ad-Hoc network, it is useful to understand the -sequence and requirements for the driver to be able to create, join, or + +------+----------------------------+--------------------+ + | | | Supported channels | + | Code | Geography +----------+---------+ + | | | 802.11bg | 802.11a | + +======+============================+==========+=========+ + | --- | Restricted | 11 | 0 | + +------+----------------------------+----------+---------+ + | ZZF | Custom US/Canada | 11 | 8 | + +------+----------------------------+----------+---------+ + | ZZD | Rest of World | 13 | 0 | + +------+----------------------------+----------+---------+ + | ZZA | Custom USA & Europe & High | 11 | 13 | + +------+----------------------------+----------+---------+ + | ZZB | Custom NA & Europe | 11 | 13 | + +------+----------------------------+----------+---------+ + | ZZC | Custom Japan | 11 | 4 | + +------+----------------------------+----------+---------+ + | ZZM | Custom | 11 | 0 | + +------+----------------------------+----------+---------+ + | ZZE | Europe | 13 | 19 | + +------+----------------------------+----------+---------+ + | ZZJ | Custom Japan | 14 | 4 | + +------+----------------------------+----------+---------+ + | ZZR | Rest of World | 14 | 0 | + +------+----------------------------+----------+---------+ + | ZZH | High Band | 13 | 4 | + +------+----------------------------+----------+---------+ + | ZZG | Custom Europe | 13 | 4 | + +------+----------------------------+----------+---------+ + | ZZK | Europe | 13 | 24 | + +------+----------------------------+----------+---------+ + | ZZL | Europe | 11 | 13 | + +------+----------------------------+----------+---------+ + +2. Ad-Hoc Networking +===================== + +When using a device in an Ad-Hoc network, it is useful to understand the +sequence and requirements for the driver to be able to create, join, or merge networks. -The following attempts to provide enough information so that you can -have a consistent experience while using the driver as a member of an +The following attempts to provide enough information so that you can +have a consistent experience while using the driver as a member of an Ad-Hoc network. 2.1. Joining an Ad-Hoc Network ------------------------------------------------ +------------------------------ -The easiest way to get onto an Ad-Hoc network is to join one that +The easiest way to get onto an Ad-Hoc network is to join one that already exists. 2.2. Creating an Ad-Hoc Network ------------------------------------------------ +------------------------------- An Ad-Hoc networks is created using the syntax of the Wireless tool. @@ -371,21 +423,21 @@ For Example: iwconfig eth1 mode ad-hoc essid testing channel 2 2.3. Merging Ad-Hoc Networks ------------------------------------------------ +---------------------------- -3. Interaction with Wireless Tools ------------------------------------------------ +3. Interaction with Wireless Tools +================================== 3.1 iwconfig mode ------------------------------------------------ +----------------- When configuring the mode of the adapter, all run-time configured parameters are reset to the value used when the module was loaded. This includes channels, rates, ESSID, etc. 3.2 iwconfig sens ------------------------------------------------ +----------------- The 'iwconfig ethX sens XX' command will not set the signal sensitivity threshold, as described in iwconfig documentation, but rather the number @@ -394,35 +446,35 @@ to another access point. At the same time, it will set the disassociation threshold to 3 times the given value. -4. About the Version Numbers ------------------------------------------------ +4. About the Version Numbers +============================= -Due to the nature of open source development projects, there are -frequently changes being incorporated that have not gone through -a complete validation process. These changes are incorporated into +Due to the nature of open source development projects, there are +frequently changes being incorporated that have not gone through +a complete validation process. These changes are incorporated into development snapshot releases. -Releases are numbered with a three level scheme: +Releases are numbered with a three level scheme: major.minor.development Any version where the 'development' portion is 0 (for example -1.0.0, 1.1.0, etc.) indicates a stable version that will be made +1.0.0, 1.1.0, etc.) indicates a stable version that will be made available for kernel inclusion. Any version where the 'development' portion is not a 0 (for example 1.0.1, 1.1.5, etc.) indicates a development version that is -being made available for testing and cutting edge users. The stability +being made available for testing and cutting edge users. The stability and functionality of the development releases are not know. We make efforts to try and keep all snapshots reasonably stable, but due to the -frequency of their release, and the desire to get those releases +frequency of their release, and the desire to get those releases available as quickly as possible, unknown anomalies should be expected. The major version number will be incremented when significant changes are made to the driver. Currently, there are no major changes planned. -5. Firmware installation ----------------------------------------------- +5. Firmware installation +======================== The driver requires a firmware image, download it and extract the files under /lib/firmware (or wherever your hotplug's firmware.agent @@ -433,40 +485,42 @@ The firmware can be downloaded from the following URL: http://ipw2200.sf.net/ -6. Support ------------------------------------------------ +6. Support +========== -For direct support of the 1.0.0 version, you can contact +For direct support of the 1.0.0 version, you can contact http://supportmail.intel.com, or you can use the open source project support. For general information and support, go to: - + http://ipw2200.sf.net/ -7. License ------------------------------------------------ +7. License +========== - Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved. + Copyright |copy| 2003 - 2006 Intel Corporation. All rights reserved. - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License version 2 as + This program is free software; you can redistribute it and/or modify it + under the terms of the GNU General Public License version 2 as published by the Free Software Foundation. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 + this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - + The full GNU General Public License is included in this distribution in the file called LICENSE. - + Contact Information: + James P. Ketrenos <ipw2100-admin@linux.intel.com> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |