diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml | 96 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/bus/uniphier-system-bus.txt | 66 |
2 files changed, 96 insertions, 66 deletions
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml new file mode 100644 index 000000000000..ff9600d6de3b --- /dev/null +++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UniPhier System Bus + +description: | + The UniPhier System Bus is an external bus that connects on-board devices to + the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and + some control signals. It supports up to 8 banks (chip selects). + + Before any access to the bus, the bus controller must be configured; the bus + controller registers provide the control for the translation from the offset + within each bank to the CPU-viewed address. The needed setup includes the + base address, the size of each bank. Optionally, some timing parameters can + be optimized for faster bus access. + +maintainers: + - Masahiro Yamada <yamada.masahiro@socionext.com> + +properties: + compatible: + const: socionext,uniphier-system-bus + + reg: + maxItems: 1 + + "#address-cells": + description: | + The first cell is the bank number (chip select). + The second cell is the address offset within the bank. + const: 2 + + "#size-cells": + const: 1 + + ranges: + description: | + Provide address translation from the System Bus to the parent bus. + + Note: + The address region(s) that can be assigned for the System Bus is + implementation defined. Some SoCs can use 0x00000000-0x0fffffff and + 0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff. + There might be additional limitations depending on SoCs and the boot mode. + The address translation is arbitrary as long as the banks are assigned in + the supported address space with the required alignment and they do not + overlap one another. + + For example, it is possible to map: + bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff + It is also possible to map: + bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff + There is no reason to stick to a particular translation mapping, but the + "ranges" property should provide a "reasonable" default that is known to + work. The software should initialize the bus controller according to it. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +examples: + - | + // In this example, + // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and + // mapped to 0x43f00000 of the parent bus. + // - the UART device is connected at the offset 0x00200000 of CS5 and + // mapped to 0x46200000 of the parent bus. + + system-bus { + compatible = "socionext,uniphier-system-bus"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <1 0x00000000 0x42000000 0x02000000>, + <5 0x00000000 0x46000000 0x01000000>; + + ethernet@1,01f00000 { + compatible = "smsc,lan9115"; + reg = <1 0x01f00000 0x1000>; + interrupts = <0 48 4>; + phy-mode = "mii"; + }; + + uart@5,00200000 { + compatible = "ns16550a"; + reg = <5 0x00200000 0x20>; + interrupts = <0 49 4>; + clock-frequency = <12288000>; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt b/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt deleted file mode 100644 index 68ef80afff16..000000000000 --- a/Documentation/devicetree/bindings/bus/uniphier-system-bus.txt +++ /dev/null @@ -1,66 +0,0 @@ -UniPhier System Bus - -The UniPhier System Bus is an external bus that connects on-board devices to -the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and -some control signals. It supports up to 8 banks (chip selects). - -Before any access to the bus, the bus controller must be configured; the bus -controller registers provide the control for the translation from the offset -within each bank to the CPU-viewed address. The needed setup includes the base -address, the size of each bank. Optionally, some timing parameters can be -optimized for faster bus access. - -Required properties: -- compatible: should be "socionext,uniphier-system-bus". -- reg: offset and length of the register set for the bus controller device. -- #address-cells: should be 2. The first cell is the bank number (chip select). - The second cell is the address offset within the bank. -- #size-cells: should be 1. -- ranges: should provide a proper address translation from the System Bus to - the parent bus. - -Note: -The address region(s) that can be assigned for the System Bus is implementation -defined. Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff, -while other SoCs can only use 0x40000000-0x4fffffff. There might be additional -limitations depending on SoCs and the boot mode. The address translation is -arbitrary as long as the banks are assigned in the supported address space with -the required alignment and they do not overlap one another. -For example, it is possible to map: - bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff -It is also possible to map: - bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff -There is no reason to stick to a particular translation mapping, but the -"ranges" property should provide a "reasonable" default that is known to work. -The software should initialize the bus controller according to it. - -Example: - - system-bus { - compatible = "socionext,uniphier-system-bus"; - reg = <0x58c00000 0x400>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <1 0x00000000 0x42000000 0x02000000 - 5 0x00000000 0x46000000 0x01000000>; - - ethernet@1,01f00000 { - compatible = "smsc,lan9115"; - reg = <1 0x01f00000 0x1000>; - interrupts = <0 48 4> - phy-mode = "mii"; - }; - - uart@5,00200000 { - compatible = "ns16550a"; - reg = <5 0x00200000 0x20>; - interrupts = <0 49 4> - clock-frequency = <12288000>; - }; - }; - -In this example, - - the Ethernet device is connected at the offset 0x01f00000 of CS1 and - mapped to 0x43f00000 of the parent bus. - - the UART device is connected at the offset 0x00200000 of CS5 and - mapped to 0x46200000 of the parent bus. |