diff options
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/devicetree/bindings/usb/amlogic,dwc3.txt | 42 |
1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt deleted file mode 100644 index 9a8b631904fd..000000000000 --- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt +++ /dev/null @@ -1,42 +0,0 @@ -Amlogic Meson GX DWC3 USB SoC controller - -Required properties: -- compatible: depending on the SoC this should contain one of: - * amlogic,meson-axg-dwc3 - * amlogic,meson-gxl-dwc3 -- clocks: a handle for the "USB general" clock -- clock-names: must be "usb_general" -- resets: a handle for the shared "USB OTG" reset line -- reset-names: must be "usb_otg" - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -PHY documentation is provided in the following places: -- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt -- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt - -Example device nodes: - usb0: usb@ff500000 { - compatible = "amlogic,meson-axg-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - clock-names = "usb_general"; - resets = <&reset RESET_USB_OTG>; - reset-names = "usb_otg"; - - dwc3: dwc3@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - phys = <&usb3_phy>, <&usb2_phy0>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; |