summaryrefslogtreecommitdiffstats
path: root/Documentation/security/SCTP.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/security/SCTP.rst')
-rw-r--r--Documentation/security/SCTP.rst343
1 files changed, 343 insertions, 0 deletions
diff --git a/Documentation/security/SCTP.rst b/Documentation/security/SCTP.rst
new file mode 100644
index 000000000000..d903eb97fcf3
--- /dev/null
+++ b/Documentation/security/SCTP.rst
@@ -0,0 +1,343 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+SCTP
+====
+
+SCTP LSM Support
+================
+
+Security Hooks
+--------------
+
+For security module support, three SCTP specific hooks have been implemented::
+
+ security_sctp_assoc_request()
+ security_sctp_bind_connect()
+ security_sctp_sk_clone()
+
+Also the following security hook has been utilised::
+
+ security_inet_conn_established()
+
+The usage of these hooks are described below with the SELinux implementation
+described in the `SCTP SELinux Support`_ chapter.
+
+
+security_sctp_assoc_request()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Passes the ``@ep`` and ``@chunk->skb`` of the association INIT packet to the
+security module. Returns 0 on success, error on failure.
+::
+
+ @ep - pointer to sctp endpoint structure.
+ @skb - pointer to skbuff of association packet.
+
+
+security_sctp_bind_connect()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Passes one or more ipv4/ipv6 addresses to the security module for validation
+based on the ``@optname`` that will result in either a bind or connect
+service as shown in the permission check tables below.
+Returns 0 on success, error on failure.
+::
+
+ @sk - Pointer to sock structure.
+ @optname - Name of the option to validate.
+ @address - One or more ipv4 / ipv6 addresses.
+ @addrlen - The total length of address(s). This is calculated on each
+ ipv4 or ipv6 address using sizeof(struct sockaddr_in) or
+ sizeof(struct sockaddr_in6).
+
+ ------------------------------------------------------------------
+ | BIND Type Checks |
+ | @optname | @address contains |
+ |----------------------------|-----------------------------------|
+ | SCTP_SOCKOPT_BINDX_ADD | One or more ipv4 / ipv6 addresses |
+ | SCTP_PRIMARY_ADDR | Single ipv4 or ipv6 address |
+ | SCTP_SET_PEER_PRIMARY_ADDR | Single ipv4 or ipv6 address |
+ ------------------------------------------------------------------
+
+ ------------------------------------------------------------------
+ | CONNECT Type Checks |
+ | @optname | @address contains |
+ |----------------------------|-----------------------------------|
+ | SCTP_SOCKOPT_CONNECTX | One or more ipv4 / ipv6 addresses |
+ | SCTP_PARAM_ADD_IP | One or more ipv4 / ipv6 addresses |
+ | SCTP_SENDMSG_CONNECT | Single ipv4 or ipv6 address |
+ | SCTP_PARAM_SET_PRIMARY | Single ipv4 or ipv6 address |
+ ------------------------------------------------------------------
+
+A summary of the ``@optname`` entries is as follows::
+
+ SCTP_SOCKOPT_BINDX_ADD - Allows additional bind addresses to be
+ associated after (optionally) calling
+ bind(3).
+ sctp_bindx(3) adds a set of bind
+ addresses on a socket.
+
+ SCTP_SOCKOPT_CONNECTX - Allows the allocation of multiple
+ addresses for reaching a peer
+ (multi-homed).
+ sctp_connectx(3) initiates a connection
+ on an SCTP socket using multiple
+ destination addresses.
+
+ SCTP_SENDMSG_CONNECT - Initiate a connection that is generated by a
+ sendmsg(2) or sctp_sendmsg(3) on a new asociation.
+
+ SCTP_PRIMARY_ADDR - Set local primary address.
+
+ SCTP_SET_PEER_PRIMARY_ADDR - Request peer sets address as
+ association primary.
+
+ SCTP_PARAM_ADD_IP - These are used when Dynamic Address
+ SCTP_PARAM_SET_PRIMARY - Reconfiguration is enabled as explained below.
+
+
+To support Dynamic Address Reconfiguration the following parameters must be
+enabled on both endpoints (or use the appropriate **setsockopt**\(2))::
+
+ /proc/sys/net/sctp/addip_enable
+ /proc/sys/net/sctp/addip_noauth_enable
+
+then the following *_PARAM_*'s are sent to the peer in an
+ASCONF chunk when the corresponding ``@optname``'s are present::
+
+ @optname ASCONF Parameter
+ ---------- ------------------
+ SCTP_SOCKOPT_BINDX_ADD -> SCTP_PARAM_ADD_IP
+ SCTP_SET_PEER_PRIMARY_ADDR -> SCTP_PARAM_SET_PRIMARY
+
+
+security_sctp_sk_clone()
+~~~~~~~~~~~~~~~~~~~~~~~~
+Called whenever a new socket is created by **accept**\(2)
+(i.e. a TCP style socket) or when a socket is 'peeled off' e.g userspace
+calls **sctp_peeloff**\(3).
+::
+
+ @ep - pointer to current sctp endpoint structure.
+ @sk - pointer to current sock structure.
+ @sk - pointer to new sock structure.
+
+
+security_inet_conn_established()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Called when a COOKIE ACK is received::
+
+ @sk - pointer to sock structure.
+ @skb - pointer to skbuff of the COOKIE ACK packet.
+
+
+Security Hooks used for Association Establishment
+-------------------------------------------------
+
+The following diagram shows the use of ``security_sctp_bind_connect()``,
+``security_sctp_assoc_request()``, ``security_inet_conn_established()`` when
+establishing an association.
+::
+
+ SCTP endpoint "A" SCTP endpoint "Z"
+ ================= =================
+ sctp_sf_do_prm_asoc()
+ Association setup can be initiated
+ by a connect(2), sctp_connectx(3),
+ sendmsg(2) or sctp_sendmsg(3).
+ These will result in a call to
+ security_sctp_bind_connect() to
+ initiate an association to
+ SCTP peer endpoint "Z".
+ INIT --------------------------------------------->
+ sctp_sf_do_5_1B_init()
+ Respond to an INIT chunk.
+ SCTP peer endpoint "A" is
+ asking for an association. Call
+ security_sctp_assoc_request()
+ to set the peer label if first
+ association.
+ If not first association, check
+ whether allowed, IF so send:
+ <----------------------------------------------- INIT ACK
+ | ELSE audit event and silently
+ | discard the packet.
+ |
+ COOKIE ECHO ------------------------------------------>
+ |
+ |
+ |
+ <------------------------------------------- COOKIE ACK
+ | |
+ sctp_sf_do_5_1E_ca |
+ Call security_inet_conn_established() |
+ to set the peer label. |
+ | |
+ | If SCTP_SOCKET_TCP or peeled off
+ | socket security_sctp_sk_clone() is
+ | called to clone the new socket.
+ | |
+ ESTABLISHED ESTABLISHED
+ | |
+ ------------------------------------------------------------------
+ | Association Established |
+ ------------------------------------------------------------------
+
+
+SCTP SELinux Support
+====================
+
+Security Hooks
+--------------
+
+The `SCTP LSM Support`_ chapter above describes the following SCTP security
+hooks with the SELinux specifics expanded below::
+
+ security_sctp_assoc_request()
+ security_sctp_bind_connect()
+ security_sctp_sk_clone()
+ security_inet_conn_established()
+
+
+security_sctp_assoc_request()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Passes the ``@ep`` and ``@chunk->skb`` of the association INIT packet to the
+security module. Returns 0 on success, error on failure.
+::
+
+ @ep - pointer to sctp endpoint structure.
+ @skb - pointer to skbuff of association packet.
+
+The security module performs the following operations:
+ IF this is the first association on ``@ep->base.sk``, then set the peer
+ sid to that in ``@skb``. This will ensure there is only one peer sid
+ assigned to ``@ep->base.sk`` that may support multiple associations.
+
+ ELSE validate the ``@ep->base.sk peer_sid`` against the ``@skb peer sid``
+ to determine whether the association should be allowed or denied.
+
+ Set the sctp ``@ep sid`` to socket's sid (from ``ep->base.sk``) with
+ MLS portion taken from ``@skb peer sid``. This will be used by SCTP
+ TCP style sockets and peeled off connections as they cause a new socket
+ to be generated.
+
+ If IP security options are configured (CIPSO/CALIPSO), then the ip
+ options are set on the socket.
+
+
+security_sctp_bind_connect()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Checks permissions required for ipv4/ipv6 addresses based on the ``@optname``
+as follows::
+
+ ------------------------------------------------------------------
+ | BIND Permission Checks |
+ | @optname | @address contains |
+ |----------------------------|-----------------------------------|
+ | SCTP_SOCKOPT_BINDX_ADD | One or more ipv4 / ipv6 addresses |
+ | SCTP_PRIMARY_ADDR | Single ipv4 or ipv6 address |
+ | SCTP_SET_PEER_PRIMARY_ADDR | Single ipv4 or ipv6 address |
+ ------------------------------------------------------------------
+
+ ------------------------------------------------------------------
+ | CONNECT Permission Checks |
+ | @optname | @address contains |
+ |----------------------------|-----------------------------------|
+ | SCTP_SOCKOPT_CONNECTX | One or more ipv4 / ipv6 addresses |
+ | SCTP_PARAM_ADD_IP | One or more ipv4 / ipv6 addresses |
+ | SCTP_SENDMSG_CONNECT | Single ipv4 or ipv6 address |
+ | SCTP_PARAM_SET_PRIMARY | Single ipv4 or ipv6 address |
+ ------------------------------------------------------------------
+
+
+`SCTP LSM Support`_ gives a summary of the ``@optname``
+entries and also describes ASCONF chunk processing when Dynamic Address
+Reconfiguration is enabled.
+
+
+security_sctp_sk_clone()
+~~~~~~~~~~~~~~~~~~~~~~~~
+Called whenever a new socket is created by **accept**\(2) (i.e. a TCP style
+socket) or when a socket is 'peeled off' e.g userspace calls
+**sctp_peeloff**\(3). ``security_sctp_sk_clone()`` will set the new
+sockets sid and peer sid to that contained in the ``@ep sid`` and
+``@ep peer sid`` respectively.
+::
+
+ @ep - pointer to current sctp endpoint structure.
+ @sk - pointer to current sock structure.
+ @sk - pointer to new sock structure.
+
+
+security_inet_conn_established()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Called when a COOKIE ACK is received where it sets the connection's peer sid
+to that in ``@skb``::
+
+ @sk - pointer to sock structure.
+ @skb - pointer to skbuff of the COOKIE ACK packet.
+
+
+Policy Statements
+-----------------
+The following class and permissions to support SCTP are available within the
+kernel::
+
+ class sctp_socket inherits socket { node_bind }
+
+whenever the following policy capability is enabled::
+
+ policycap extended_socket_class;
+
+SELinux SCTP support adds the ``name_connect`` permission for connecting
+to a specific port type and the ``association`` permission that is explained
+in the section below.
+
+If userspace tools have been updated, SCTP will support the ``portcon``
+statement as shown in the following example::
+
+ portcon sctp 1024-1036 system_u:object_r:sctp_ports_t:s0
+
+
+SCTP Peer Labeling
+------------------
+An SCTP socket will only have one peer label assigned to it. This will be
+assigned during the establishment of the first association. Any further
+associations on this socket will have their packet peer label compared to
+the sockets peer label, and only if they are different will the
+``association`` permission be validated. This is validated by checking the
+socket peer sid against the received packets peer sid to determine whether
+the association should be allowed or denied.
+
+NOTES:
+ 1) If peer labeling is not enabled, then the peer context will always be
+ ``SECINITSID_UNLABELED`` (``unlabeled_t`` in Reference Policy).
+
+ 2) As SCTP can support more than one transport address per endpoint
+ (multi-homing) on a single socket, it is possible to configure policy
+ and NetLabel to provide different peer labels for each of these. As the
+ socket peer label is determined by the first associations transport
+ address, it is recommended that all peer labels are consistent.
+
+ 3) **getpeercon**\(3) may be used by userspace to retrieve the sockets peer
+ context.
+
+ 4) While not SCTP specific, be aware when using NetLabel that if a label
+ is assigned to a specific interface, and that interface 'goes down',
+ then the NetLabel service will remove the entry. Therefore ensure that
+ the network startup scripts call **netlabelctl**\(8) to set the required
+ label (see **netlabel-config**\(8) helper script for details).
+
+ 5) The NetLabel SCTP peer labeling rules apply as discussed in the following
+ set of posts tagged "netlabel" at: http://www.paul-moore.com/blog/t.
+
+ 6) CIPSO is only supported for IPv4 addressing: ``socket(AF_INET, ...)``
+ CALIPSO is only supported for IPv6 addressing: ``socket(AF_INET6, ...)``
+
+ Note the following when testing CIPSO/CALIPSO:
+ a) CIPSO will send an ICMP packet if an SCTP packet cannot be
+ delivered because of an invalid label.
+ b) CALIPSO does not send an ICMP packet, just silently discards it.
+
+ 7) IPSEC is not supported as RFC 3554 - sctp/ipsec support has not been
+ implemented in userspace (**racoon**\(8) or **ipsec_pluto**\(8)),
+ although the kernel supports SCTP/IPSEC.