summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/ltc4260
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/ltc4260')
-rw-r--r--Documentation/hwmon/ltc426016
1 files changed, 12 insertions, 4 deletions
diff --git a/Documentation/hwmon/ltc4260 b/Documentation/hwmon/ltc4260
index c4ff4ad998b2..4c335b6a51d1 100644
--- a/Documentation/hwmon/ltc4260
+++ b/Documentation/hwmon/ltc4260
@@ -2,11 +2,16 @@ Kernel driver ltc4260
=====================
Supported chips:
+
* Linear Technology LTC4260
+
Prefix: 'ltc4260'
+
Addresses scanned: -
+
Datasheet:
- http://cds.linear.com/docs/en/datasheet/4260fc.pdf
+
+ http://cds.linear.com/docs/en/datasheet/4260fc.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@@ -26,9 +31,10 @@ which can be safely used to identify the chip. You will have to instantiate
the devices explicitly.
Example: the following will load the driver for an LTC4260 at address 0x10
-on I2C bus #1:
-$ modprobe ltc4260
-$ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
+on I2C bus #1::
+
+ $ modprobe ltc4260
+ $ echo ltc4260 0x10 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs entries
@@ -45,6 +51,7 @@ Current Sense register. The reported value assumes that a 1 mOhm sense resistor
is installed. If a different sense resistor is installed, calculate the real
current by dividing the reported value by the sense resistor value in mOhm.
+======================= =======================
in1_input SOURCE voltage (mV)
in1_min_alarm Undervoltage alarm
in1_max_alarm Overvoltage alarm
@@ -54,3 +61,4 @@ in2_alarm Power bad alarm
curr1_input SENSE current (mA)
curr1_alarm SENSE overcurrent alarm
+======================= =======================