diff options
Diffstat (limited to 'Documentation/devicetree')
11 files changed, 81 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index e593bbeb2115..504291d2e5c2 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -3,10 +3,23 @@ Required properties: - compatible : should be one of the following: "altr,socfpga-denali-nand" - for Altera SOCFPGA + "socionext,uniphier-denali-nand-v5a" - for Socionext UniPhier (v5a) + "socionext,uniphier-denali-nand-v5b" - for Socionext UniPhier (v5b) - reg : should contain registers location and length for data and reg. - reg-names: Should contain the reg names "nand_data" and "denali_reg" - interrupts : The interrupt number. +Optional properties: + - nand-ecc-step-size: see nand.txt for details. If present, the value must be + 512 for "altr,socfpga-denali-nand" + 1024 for "socionext,uniphier-denali-nand-v5a" + 1024 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-strength: see nand.txt for details. Valid values are: + 8, 15 for "altr,socfpga-denali-nand" + 8, 16, 24 for "socionext,uniphier-denali-nand-v5a" + 8, 16 for "socionext,uniphier-denali-nand-v5b" + - nand-ecc-maximize: see nand.txt for details + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt index 8c1528c421d4..59ddc61c1076 100644 --- a/Documentation/devicetree/bindings/mtd/elm.txt +++ b/Documentation/devicetree/bindings/mtd/elm.txt @@ -1,7 +1,7 @@ Error location module Required properties: -- compatible: Must be "ti,am33xx-elm" +- compatible: Must be "ti,am3352-elm" - reg: physical base address and size of the registers map. - interrupts: Interrupt number for the elm. diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt index 174f68c26c1b..dd559045593d 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "nand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For NAND specific properties such as ECC modes or bus width, please refer to Documentation/devicetree/bindings/mtd/nand.txt diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt index 4828c17bb784..131d3a74d0bd 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt @@ -5,7 +5,7 @@ child nodes of the GPMC controller with a name of "nor". All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: - bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and @@ -28,7 +28,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/bus/ti-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Optional properties for partition table parsing: - #address-cells: should be set to 1 diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt index 5d8fa527c496..b6e8bfd024f4 100644 --- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt @@ -5,7 +5,7 @@ the GPMC controller with a name of "onenand". All timing relevant properties as well as generic gpmc child properties are explained in a separate documents - please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Required properties: diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index d02acaff3c35..b289ef3c1b7e 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -4,7 +4,12 @@ The GPMI nand controller provides an interface to control the NAND flash chips. Required properties: - - compatible : should be "fsl,<chip>-gpmi-nand" + - compatible : should be "fsl,<chip>-gpmi-nand", chip can be: + * imx23 + * imx28 + * imx6q + * imx6sx + * imx7d - reg : should contain registers location and length for gpmi and bch. - reg-names: Should contain the reg names "gpmi-nand" and "bch" - interrupts : BCH interrupt number. @@ -13,6 +18,13 @@ Required properties: and GPMI DMA channel ID. Refer to dma.txt and fsl-mxs-dma.txt for details. - dma-names: Must be "rx-tx". + - clocks : clocks phandle and clock specifier corresponding to each clock + specified in clock-names. + - clock-names : The "gpmi_io" clock is always required. Which clocks are + exactly required depends on chip: + * imx23/imx28 : "gpmi_io" + * imx6q/sx : "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch" + * imx7d : "gpmi_io", "gpmi_bch_apb" Optional properties: - nand-on-flash-bbt: boolean to enable on flash bbt option if not diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt new file mode 100644 index 000000000000..7328eb92a03c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt @@ -0,0 +1,18 @@ +* MTD SPI driver for Microchip 23K256 (and similar) serial SRAM + +Required properties: +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. +- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024" +- reg : Chip-Select number +- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at + +Example: + + spi-sram@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "microchip,mchp23k256"; + reg = <0>; + spi-max-frequency = <20000000>; + }; diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt index 069c192ed5c2..dbf9e054c11c 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt @@ -12,7 +12,8 @@ tree nodes. The first part of NFC is NAND Controller Interface (NFI) HW. Required NFI properties: -- compatible: Should be "mediatek,mtxxxx-nfc". +- compatible: Should be one of "mediatek,mt2701-nfc", + "mediatek,mt2712-nfc". - reg: Base physical address and size of NFI. - interrupts: Interrupts of NFI. - clocks: NFI required clocks. @@ -141,7 +142,7 @@ Example: ============== Required BCH properties: -- compatible: Should be "mediatek,mtxxxx-ecc". +- compatible: Should be one of "mediatek,mt2701-ecc", "mediatek,mt2712-ecc". - reg: Base physical address and size of ECC. - interrupts: Interrupts of ECC. - clocks: ECC required clocks. diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt index b05601600083..133f3813719c 100644 --- a/Documentation/devicetree/bindings/mtd/nand.txt +++ b/Documentation/devicetree/bindings/mtd/nand.txt @@ -21,7 +21,7 @@ Optional NAND chip properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode. Supported values are: "none", "soft", "hw", "hw_syndrome", - "hw_oob_first". + "hw_oob_first", "on-die". Deprecated values: "soft_bch": use "soft" and nand-ecc-algo instead - nand-ecc-algo: string, algorithm of NAND ECC. diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index 81a224da63be..36f3b769a626 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -1,29 +1,49 @@ -Representing flash partitions in devicetree +Flash partitions in device tree +=============================== -Partitions can be represented by sub-nodes of an mtd device. This can be used +Flash devices can be partitioned into one or more functional ranges (e.g. "boot +code", "nvram", "kernel"). + +Different devices may be partitioned in a different ways. Some may use a fixed +flash layout set at production time. Some may use on-flash table that describes +the geometry and naming/purpose of each functional region. It is also possible +to see these methods mixed. + +To assist system software in locating partitions, we allow describing which +method is used for a given flash device. To describe the method there should be +a subnode of the flash device that is named 'partitions'. It must have a +'compatible' property, which is used to identify the method to use. + +We currently only document a binding for fixed layouts. + + +Fixed Partitions +================ + +Partitions can be represented by sub-nodes of a flash device. This can be used on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -The partition table should be a subnode of the mtd node and should be named +The partition table should be a subnode of the flash node and should be named 'partitions'. This node should have the following property: - compatible : (required) must be "fixed-partitions" Partitions are then defined in subnodes of the partitions node. -For backwards compatibility partitions as direct subnodes of the mtd device are +For backwards compatibility partitions as direct subnodes of the flash device are supported. This use is discouraged. NOTE: also for backwards compatibility, direct subnodes that have a compatible string are not considered partitions, as they may be used for other bindings. #address-cells & #size-cells must both be present in the partitions subnode of the -mtd device. There are two valid values for both: +flash device. There are two valid values for both: <1>: for partitions that require a single 32-bit cell to represent their size/address (aka the value is below 4 GiB) <2>: for partitions that require two 32-bit cells to represent their size/address (aka the value is 4 GiB or greater). Required properties: -- reg : The partition's offset and size within the mtd bank. +- reg : The partition's offset and size within the flash Optional properties: - label : The label / name for this partition. If omitted, the label is taken diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt index ace4a64b3695..f7da3d73ca1b 100644 --- a/Documentation/devicetree/bindings/net/gpmc-eth.txt +++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt @@ -9,7 +9,7 @@ the GPMC controller with an "ethernet" name. All timing relevant properties as well as generic GPMC child properties are explained in a separate documents. Please refer to -Documentation/devicetree/bindings/bus/ti-gpmc.txt +Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt For the properties relevant to the ethernet controller connected to the GPMC refer to the binding documentation of the device. For example, the documentation @@ -43,7 +43,7 @@ Required properties: Optional properties: - gpmc,XXX Additional GPMC timings and settings parameters. See - Documentation/devicetree/bindings/bus/ti-gpmc.txt + Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt Example: |