diff options
Diffstat (limited to 'Documentation/devicetree')
11 files changed, 341 insertions, 68 deletions
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt index f3cef1a6d95c..07c9d813465c 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -10,6 +10,7 @@ Required Properties: - "mediatek,mt7622-audsys", "syscon" - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - "mediatek,mt8183-audiosys", "syscon" + - "mediatek,mt8516-audsys", "syscon" - #clock-cells: Must be 1 The AUDSYS controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml new file mode 100644 index 000000000000..c935405458fe --- /dev/null +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,sun4i-a10-ccu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner Clock Control Unit Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <maxime.ripard@bootlin.com> + +properties: + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + compatible: + enum: + - allwinner,sun4i-a10-ccu + - allwinner,sun5i-a10s-ccu + - allwinner,sun5i-a13-ccu + - allwinner,sun6i-a31-ccu + - allwinner,sun7i-a20-ccu + - allwinner,sun8i-a23-ccu + - allwinner,sun8i-a33-ccu + - allwinner,sun8i-a83t-ccu + - allwinner,sun8i-a83t-r-ccu + - allwinner,sun8i-h3-ccu + - allwinner,sun8i-h3-r-ccu + - allwinner,sun8i-r40-ccu + - allwinner,sun8i-v3s-ccu + - allwinner,sun9i-a80-ccu + - allwinner,sun50i-a64-ccu + - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-h5-ccu + - allwinner,sun50i-h6-ccu + - allwinner,sun50i-h6-r-ccu + - allwinner,suniv-f1c100s-ccu + - nextthing,gr8-ccu + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + items: + - description: High Frequency Oscillator (usually at 24MHz) + - description: Low Frequency Oscillator (usually at 32kHz) + - description: Internal Oscillator + - description: Peripherals PLL + + clock-names: + minItems: 2 + maxItems: 4 + items: + - const: hosc + - const: losc + - const: iosc + - const: pll-periph + +required: + - "#clock-cells" + - "#reset-cells" + - compatible + - reg + - clocks + - clock-names + +if: + properties: + compatible: + enum: + - allwinner,sun8i-a83t-r-ccu + - allwinner,sun8i-h3-r-ccu + - allwinner,sun50i-a64-r-ccu + - allwinner,sun50i-h6-r-ccu + +then: + properties: + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + minItems: 4 + maxItems: 4 + +else: + if: + properties: + compatible: + const: allwinner,sun50i-h6-ccu + + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + minItems: 3 + maxItems: 3 + + else: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + minItems: 2 + maxItems: 2 + +additionalProperties: false + +examples: + - | + ccu: clock@1c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + - | + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu 11>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt index 5c8b105be4d6..6eaa52092313 100644 --- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt +++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt @@ -10,6 +10,7 @@ Required Properties: "amlogic,gxl-clkc" for GXL and GXM SoC, "amlogic,axg-clkc" for AXG SoC. "amlogic,g12a-clkc" for G12A SoC. + "amlogic,g12b-clkc" for G12B SoC. - clocks : list of clock phandle, one for each entry clock-names. - clock-names : should contain the following: * "xtal": the platform xtal diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt index b520280e33ff..13f45db3b66d 100644 --- a/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -9,10 +9,11 @@ Slow Clock controller: Required properties: - compatible : shall be one of the following: "atmel,at91sam9x5-sckc", - "atmel,sama5d3-sckc" or - "atmel,sama5d4-sckc": + "atmel,sama5d3-sckc", + "atmel,sama5d4-sckc" or + "microchip,sam9x60-sckc": at91 SCKC (Slow Clock Controller) -- #clock-cells : shall be 0. +- #clock-cells : shall be 1 for "microchip,sam9x60-sckc" otherwise shall be 0. - clocks : shall be the input parent clock phandle for the clock. Optional properties: diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt new file mode 100644 index 000000000000..3041657e2f96 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/brcm,bcm63xx-clocks.txt @@ -0,0 +1,22 @@ +Gated Clock Controller Bindings for MIPS based BCM63XX SoCs + +Required properties: +- compatible: must be one of: + "brcm,bcm3368-clocks" + "brcm,bcm6328-clocks" + "brcm,bcm6358-clocks" + "brcm,bcm6362-clocks" + "brcm,bcm6368-clocks" + "brcm,bcm63268-clocks" + +- reg: Address and length of the register set +- #clock-cells: must be <1> + + +Example: + +clkctl: clock-controller@10000004 { + compatible = "brcm,bcm6328-clocks"; + reg = <0x10000004 0x4>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt index b8d8ef3bdc5f..52a064c789ee 100644 --- a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt @@ -40,6 +40,7 @@ Optional properties: input audio clocks from host system. - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from external connector. + - ln-spdif-mclk : Optional input audio clock from SPDIF. - ln-spdif-clkout : Optional input audio clock from SPDIF. - ln-adat-mclk : Optional input audio clock from ADAT. - ln-pmic-32k : On board fixed clock. diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt index 796c260c183d..d8f5c490f893 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -59,6 +59,7 @@ Required properties: "marvell,dove-core-clock" - for Dove SoC core clocks "marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180) "marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC + "marvell,mv98dx1135-core-clock" - for Kirkwood 98dx1135 SoC "marvell,mv88f5181-core-clock" - for Orion MV88F5181 SoC "marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC "marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt index 4e5215ef1acd..269afe8a757e 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gpucc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.txt @@ -2,13 +2,15 @@ Qualcomm Graphics Clock & Reset Controller Binding -------------------------------------------------- Required properties : -- compatible : shall contain "qcom,sdm845-gpucc" +- compatible : shall contain "qcom,sdm845-gpucc" or "qcom,msm8998-gpucc" - reg : shall contain base register location and length - #clock-cells : from common clock binding, shall contain 1 - #reset-cells : from common reset binding, shall contain 1 - #power-domain-cells : from generic power domain binding, shall contain 1 - clocks : shall contain the XO clock + shall contain the gpll0 out main clock (msm8998) - clock-names : shall be "xo" + shall be "gpll0" (msm8998) Example: gpucc: clock-controller@5090000 { diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt index d60b99756bb9..aed713cf0831 100644 --- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt +++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt @@ -13,6 +13,7 @@ Required Properties: - external (optional) RGMII_REFCLK - clock-names: Must be: clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + - #power-domain-cells: Must be 0 Examples -------- @@ -27,6 +28,7 @@ Examples clocks = <&ext_mclk>, <&ext_rtc_clk>, <&ext_jtag_clk>, <&ext_rgmii_ref>; clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext"; + #power-domain-cells = <0>; }; - Other nodes can use the clocks provided by SYSCTRL as in: @@ -38,6 +40,7 @@ Examples interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&sysctrl R9A06G032_CLK_UART0>; - clock-names = "baudclk"; + clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + power-domains = <&sysctrl>; }; diff --git a/Documentation/devicetree/bindings/clock/silabs,si5341.txt b/Documentation/devicetree/bindings/clock/silabs,si5341.txt new file mode 100644 index 000000000000..a70c333e4cd4 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/silabs,si5341.txt @@ -0,0 +1,162 @@ +Binding for Silicon Labs Si5341 and Si5340 programmable i2c clock generator. + +Reference +[1] Si5341 Data Sheet + https://www.silabs.com/documents/public/data-sheets/Si5341-40-D-DataSheet.pdf +[2] Si5341 Reference Manual + https://www.silabs.com/documents/public/reference-manuals/Si5341-40-D-RM.pdf + +The Si5341 and Si5340 are programmable i2c clock generators with up to 10 output +clocks. The chip contains a PLL that sources 5 (or 4) multisynth clocks, which +in turn can be directed to any of the 10 (or 4) outputs through a divider. +The internal structure of the clock generators can be found in [2]. + +The driver can be used in "as is" mode, reading the current settings from the +chip at boot, in case you have a (pre-)programmed device. If the PLL is not +configured when the driver probes, it assumes the driver must fully initialize +it. + +The device type, speed grade and revision are determined runtime by probing. + +The driver currently only supports XTAL input mode, and does not support any +fancy input configurations. They can still be programmed into the chip and +the driver will leave them "as is". + +==I2C device node== + +Required properties: +- compatible: shall be one of the following: + "silabs,si5340" - Si5340 A/B/C/D + "silabs,si5341" - Si5341 A/B/C/D +- reg: i2c device address, usually 0x74 +- #clock-cells: from common clock binding; shall be set to 2. + The first value is "0" for outputs, "1" for synthesizers. + The second value is the output or synthesizer index. +- clocks: from common clock binding; list of parent clock handles, + corresponding to inputs. Use a fixed clock for the "xtal" input. + At least one must be present. +- clock-names: One of: "xtal", "in0", "in1", "in2" +- vdd-supply: Regulator node for VDD + +Optional properties: +- vdda-supply: Regulator node for VDDA +- vdds-supply: Regulator node for VDDS +- silabs,pll-m-num, silabs,pll-m-den: Numerator and denominator for PLL + feedback divider. Must be such that the PLL output is in the valid range. For + example, to create 14GHz from a 48MHz xtal, use m-num=14000 and m-den=48. Only + the fraction matters, using 3500 and 12 will deliver the exact same result. + If these are not specified, and the PLL is not yet programmed when the driver + probes, the PLL will be set to 14GHz. +- silabs,reprogram: When present, the driver will always assume the device must + be initialized, and always performs the soft-reset routine. Since this will + temporarily stop all output clocks, don't do this if the chip is generating + the CPU clock for example. +- interrupts: Interrupt for INTRb pin. +- #address-cells: shall be set to 1. +- #size-cells: shall be set to 0. + + +== Child nodes: Outputs == + +The child nodes list the output clocks. + +Each of the clock outputs can be overwritten individually by using a child node. +If a child node for a clock output is not set, the configuration remains +unchanged. + +Required child node properties: +- reg: number of clock output. + +Optional child node properties: +- vdd-supply: Regulator node for VDD for this output. The driver selects default + values for common-mode and amplitude based on the voltage. +- silabs,format: Output format, one of: + 1 = differential (defaults to LVDS levels) + 2 = low-power (defaults to HCSL levels) + 4 = LVCMOS +- silabs,common-mode: Manually override output common mode, see [2] for values +- silabs,amplitude: Manually override output amplitude, see [2] for values +- silabs,synth-master: boolean. If present, this output is allowed to change the + multisynth frequency dynamically. +- silabs,silabs,disable-high: boolean. If set, the clock output is driven HIGH + when disabled, otherwise it's driven LOW. + +==Example== + +/* 48MHz reference crystal */ +ref48: ref48M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; +}; + +i2c-master-node { + /* Programmable clock (for logic) */ + si5341: clock-generator@74 { + reg = <0x74>; + compatible = "silabs,si5341"; + #clock-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&ref48>; + clock-names = "xtal"; + + silabs,pll-m-num = <14000>; /* PLL at 14.0 GHz */ + silabs,pll-m-den = <48>; + silabs,reprogram; /* Chips are not programmed, always reset */ + + out@0 { + reg = <0>; + silabs,format = <1>; /* LVDS 3v3 */ + silabs,common-mode = <3>; + silabs,amplitude = <3>; + silabs,synth-master; + }; + + /* + * Output 6 configuration: + * LVDS 1v8 + */ + out@6 { + reg = <6>; + silabs,format = <1>; /* LVDS 1v8 */ + silabs,common-mode = <13>; + silabs,amplitude = <3>; + }; + + /* + * Output 8 configuration: + * HCSL 3v3 + */ + out@8 { + reg = <8>; + silabs,format = <2>; + silabs,common-mode = <11>; + silabs,amplitude = <3>; + }; + }; +}; + +some-video-node { + /* Standard clock bindings */ + clock-names = "pixel"; + clocks = <&si5341 0 7>; /* Output 7 */ + + /* Set output 7 to use syntesizer 3 as its parent */ + assigned-clocks = <&si5341 0 7>, <&si5341 1 3>; + assigned-clock-parents = <&si5341 1 3>; + /* Set output 7 to 148.5 MHz using a synth frequency of 594 MHz */ + assigned-clock-rates = <148500000>, <594000000>; +}; + +some-audio-node { + clock-names = "i2s-clk"; + clocks = <&si5341 0 0>; + /* + * since output 0 is a synth-master, the synth will be automatically set + * to an appropriate frequency when the audio driver requests another + * frequency. We give control over synth 2 to this output here. + */ + assigned-clocks = <&si5341 0 0>; + assigned-clock-parents = <&si5341 1 2>; +}; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt deleted file mode 100644 index e3bd88ae456b..000000000000 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ /dev/null @@ -1,62 +0,0 @@ -Allwinner Clock Control Unit Binding ------------------------------------- - -Required properties : -- compatible: must contain one of the following compatibles: - - "allwinner,sun4i-a10-ccu" - - "allwinner,sun5i-a10s-ccu" - - "allwinner,sun5i-a13-ccu" - - "allwinner,sun6i-a31-ccu" - - "allwinner,sun7i-a20-ccu" - - "allwinner,sun8i-a23-ccu" - - "allwinner,sun8i-a33-ccu" - - "allwinner,sun8i-a83t-ccu" - - "allwinner,sun8i-a83t-r-ccu" - - "allwinner,sun8i-h3-ccu" - - "allwinner,sun8i-h3-r-ccu" -+ - "allwinner,sun8i-r40-ccu" - - "allwinner,sun8i-v3s-ccu" - - "allwinner,sun9i-a80-ccu" - - "allwinner,sun50i-a64-ccu" - - "allwinner,sun50i-a64-r-ccu" - - "allwinner,sun50i-h5-ccu" - - "allwinner,sun50i-h6-ccu" - - "allwinner,sun50i-h6-r-ccu" - - "allwinner,suniv-f1c100s-ccu" - - "nextthing,gr8-ccu" - -- reg: Must contain the registers base address and length -- clocks: phandle to the oscillators feeding the CCU. Two are needed: - - "hosc": the high frequency oscillator (usually at 24MHz) - - "losc": the low frequency oscillator (usually at 32kHz) - On the A83T, this is the internal 16MHz oscillator divided by 512 -- clock-names: Must contain the clock names described just above -- #clock-cells : must contain 1 -- #reset-cells : must contain 1 - -For the main CCU on H6, one more clock is needed: -- "iosc": the SoC's internal frequency oscillator - -For the PRCM CCUs on A83T/H3/A64/H6, two more clocks are needed: -- "pll-periph": the SoC's peripheral PLL from the main CCU -- "iosc": the SoC's internal frequency oscillator - -Example for generic CCU: -ccu: clock@1c20000 { - compatible = "allwinner,sun8i-h3-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; -}; - -Example for PRCM CCU: -r_ccu: clock@1f01400 { - compatible = "allwinner,sun50i-a64-r-ccu"; - reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; - clock-names = "hosc", "losc", "iosc", "pll-periph"; - #clock-cells = <1>; - #reset-cells = <1>; -}; |