summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/nfc/pn532.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/nfc/pn532.txt')
-rw-r--r--Documentation/devicetree/bindings/net/nfc/pn532.txt46
1 files changed, 46 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt
new file mode 100644
index 000000000000..a5507dc499bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/pn532.txt
@@ -0,0 +1,46 @@
+* NXP Semiconductors PN532 NFC Controller
+
+Required properties:
+- compatible: Should be
+ - "nxp,pn532" Place a node with this inside the devicetree node of the bus
+ where the NFC chip is connected to.
+ Currently the kernel has phy bindings for uart and i2c.
+ - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
+ - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
+
+Required properties if connected on i2c:
+- clock-frequency: I²C work frequency.
+- reg: for the I²C bus address. This is fixed at 0x24 for the PN532.
+- interrupts: GPIO interrupt to which the chip is connected
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+
+Example (for ARM-based BeagleBone with PN532 on I2C2):
+
+&i2c2 {
+
+
+ pn532: nfc@24 {
+
+ compatible = "nxp,pn532";
+
+ reg = <0x24>;
+ clock-frequency = <400000>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+
+ };
+};
+
+Example (for PN532 connected via uart):
+
+uart4: serial@49042000 {
+ compatible = "ti,omap3-uart";
+
+ pn532: nfc {
+ compatible = "nxp,pn532";
+ };
+};