summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt')
-rw-r--r--Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt47
1 files changed, 0 insertions, 47 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
deleted file mode 100644
index 1d2b7fee7b85..000000000000
--- a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
-
-The IPCC block provides a non blocking signaling mechanism to post and
-retrieve messages in an atomic way between two processors.
-It provides the signaling for N bidirectionnal channels. The number of channels
-(N) can be read from a dedicated register.
-
-Required properties:
-- compatible: Must be "st,stm32mp1-ipcc"
-- reg: Register address range (base address and length)
-- st,proc-id: Processor id using the mailbox (0 or 1)
-- clocks: Input clock
-- interrupt-names: List of names for the interrupts described by the interrupt
- property. Must contain the following entries:
- - "rx"
- - "tx"
- - "wakeup"
-- interrupts: Interrupt specifiers for "rx channel occupied", "tx channel
- free" and "system wakeup".
-- #mbox-cells: Number of cells required for the mailbox specifier. Must be 1.
- The data contained in the mbox specifier of the "mboxes"
- property in the client node is the mailbox channel index.
-
-Optional properties:
-- wakeup-source: Flag to indicate whether this device can wake up the system
-
-
-
-Example:
- ipcc: mailbox@4c001000 {
- compatible = "st,stm32mp1-ipcc";
- #mbox-cells = <1>;
- reg = <0x4c001000 0x400>;
- st,proc-id = <0>;
- interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
- <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
- <&aiec 62 1>;
- interrupt-names = "rx", "tx", "wakeup";
- clocks = <&rcc_clk IPCC>;
- wakeup-source;
- }
-
-Client:
- mbox_test {
- ...
- mboxes = <&ipcc 0>, <&ipcc 1>;
- };