diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
-rw-r--r-- | Documentation/devicetree/bindings/dma/st,stm32-dma.yaml | 102 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/dma/stm32-dma.txt | 83 |
2 files changed, 102 insertions, 83 deletions
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml new file mode 100644 index 000000000000..0c0ac11ad55f --- /dev/null +++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 DMA Controller bindings + +description: | + The STM32 DMA is a general-purpose direct memory access controller capable of + supporting 8 independent DMA channels. Each channel can have up to 8 requests. + DMA clients connected to the STM32 DMA controller must use the format + described in the dma.txt file, using a four-cell specifier for each + channel: a phandle to the DMA controller plus the following four integer cells: + 1. The channel id + 2. The request line number + 3. A 32bit mask specifying the DMA channel configuration which are device + dependent: + -bit 9: Peripheral Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 10: Memory Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 15: Peripheral Increment Offset Size + 0x0: offset size is linked to the peripheral bus width + 0x1: offset size is fixed to 4 (32-bit alignment) + -bit 16-17: Priority level + 0x0: low + 0x1: medium + 0x2: high + 0x3: very high + 4. A 32bit bitfield value specifying DMA features which are device dependent: + -bit 0-1: DMA FIFO threshold selection + 0x0: 1/4 full FIFO + 0x1: 1/2 full FIFO + 0x2: 3/4 full FIFO + 0x3: full FIFO + +maintainers: + - Amelie Delaunay <amelie.delaunay@st.com> + +allOf: + - $ref: "dma-controller.yaml#" + +properties: + "#dma-cells": + const: 4 + + compatible: + const: st,stm32-dma + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 8 + description: Should contain all of the per-channel DMA + interrupts in ascending order with respect to the + DMA channel index. + + resets: + maxItems: 1 + + st,mem2mem: + $ref: /schemas/types.yaml#/definitions/flag + description: if defined, it indicates that the controller + supports memory-to-memory transfer + +required: + - compatible + - reg + - clocks + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + dma-controller@40026400 { + compatible = "st,stm32-dma"; + reg = <0x40026400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&clk_hclk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-requests = <8>; + }; + +... diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt deleted file mode 100644 index c5f519097204..000000000000 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ /dev/null @@ -1,83 +0,0 @@ -* STMicroelectronics STM32 DMA controller - -The STM32 DMA is a general-purpose direct memory access controller capable of -supporting 8 independent DMA channels. Each channel can have up to 8 requests. - -Required properties: -- compatible: Should be "st,stm32-dma" -- reg: Should contain DMA registers location and length. This should include - all of the per-channel registers. -- interrupts: Should contain all of the per-channel DMA interrupts in - ascending order with respect to the DMA channel index. -- clocks: Should contain the input clock of the DMA instance. -- #dma-cells : Must be <4>. See DMA client paragraph for more details. - -Optional properties: -- dma-requests : Number of DMA requests supported. -- resets: Reference to a reset controller asserting the DMA controller -- st,mem2mem: boolean; if defined, it indicates that the controller supports - memory-to-memory transfer - -Example: - - dma2: dma-controller@40026400 { - compatible = "st,stm32-dma"; - reg = <0x40026400 0x400>; - interrupts = <56>, - <57>, - <58>, - <59>, - <60>, - <68>, - <69>, - <70>; - clocks = <&clk_hclk>; - #dma-cells = <4>; - st,mem2mem; - resets = <&rcc 150>; - dma-requests = <8>; - }; - -* DMA client - -DMA clients connected to the STM32 DMA controller must use the format -described in the dma.txt file, using a four-cell specifier for each -channel: a phandle to the DMA controller plus the following four integer cells: - -1. The channel id -2. The request line number -3. A 32bit mask specifying the DMA channel configuration which are device - dependent: - -bit 9: Peripheral Increment Address - 0x0: no address increment between transfers - 0x1: increment address between transfers - -bit 10: Memory Increment Address - 0x0: no address increment between transfers - 0x1: increment address between transfers - -bit 15: Peripheral Increment Offset Size - 0x0: offset size is linked to the peripheral bus width - 0x1: offset size is fixed to 4 (32-bit alignment) - -bit 16-17: Priority level - 0x0: low - 0x1: medium - 0x2: high - 0x3: very high -4. A 32bit bitfield value specifying DMA features which are device dependent: - -bit 0-1: DMA FIFO threshold selection - 0x0: 1/4 full FIFO - 0x1: 1/2 full FIFO - 0x2: 3/4 full FIFO - 0x3: full FIFO - - -Example: - - usart1: serial@40011000 { - compatible = "st,stm32-uart"; - reg = <0x40011000 0x400>; - interrupts = <37>; - clocks = <&clk_pclk2>; - dmas = <&dma2 2 4 0x10400 0x3>, - <&dma2 7 5 0x10200 0x3>; - dma-names = "rx", "tx"; - }; |