summaryrefslogtreecommitdiffstats
path: root/Documentation/accounting/psi.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/accounting/psi.txt')
-rw-r--r--Documentation/accounting/psi.txt107
1 files changed, 107 insertions, 0 deletions
diff --git a/Documentation/accounting/psi.txt b/Documentation/accounting/psi.txt
index 7e71c9c1d8e9..5cbe5659e3b7 100644
--- a/Documentation/accounting/psi.txt
+++ b/Documentation/accounting/psi.txt
@@ -63,6 +63,110 @@ as well as medium and long term trends. The total absolute stall time
spikes which wouldn't necessarily make a dent in the time averages,
or to average trends over custom time frames.
+Monitoring for pressure thresholds
+==================================
+
+Users can register triggers and use poll() to be woken up when resource
+pressure exceeds certain thresholds.
+
+A trigger describes the maximum cumulative stall time over a specific
+time window, e.g. 100ms of total stall time within any 500ms window to
+generate a wakeup event.
+
+To register a trigger user has to open psi interface file under
+/proc/pressure/ representing the resource to be monitored and write the
+desired threshold and time window. The open file descriptor should be
+used to wait for trigger events using select(), poll() or epoll().
+The following format is used:
+
+<some|full> <stall amount in us> <time window in us>
+
+For example writing "some 150000 1000000" into /proc/pressure/memory
+would add 150ms threshold for partial memory stall measured within
+1sec time window. Writing "full 50000 1000000" into /proc/pressure/io
+would add 50ms threshold for full io stall measured within 1sec time window.
+
+Triggers can be set on more than one psi metric and more than one trigger
+for the same psi metric can be specified. However for each trigger a separate
+file descriptor is required to be able to poll it separately from others,
+therefore for each trigger a separate open() syscall should be made even
+when opening the same psi interface file.
+
+Monitors activate only when system enters stall state for the monitored
+psi metric and deactivates upon exit from the stall state. While system is
+in the stall state psi signal growth is monitored at a rate of 10 times per
+tracking window.
+
+The kernel accepts window sizes ranging from 500ms to 10s, therefore min
+monitoring update interval is 50ms and max is 1s. Min limit is set to
+prevent overly frequent polling. Max limit is chosen as a high enough number
+after which monitors are most likely not needed and psi averages can be used
+instead.
+
+When activated, psi monitor stays active for at least the duration of one
+tracking window to avoid repeated activations/deactivations when system is
+bouncing in and out of the stall state.
+
+Notifications to the userspace are rate-limited to one per tracking window.
+
+The trigger will de-register when the file descriptor used to define the
+trigger is closed.
+
+Userspace monitor usage example
+===============================
+
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <poll.h>
+#include <string.h>
+#include <unistd.h>
+
+/*
+ * Monitor memory partial stall with 1s tracking window size
+ * and 150ms threshold.
+ */
+int main() {
+ const char trig[] = "some 150000 1000000";
+ struct pollfd fds;
+ int n;
+
+ fds.fd = open("/proc/pressure/memory", O_RDWR | O_NONBLOCK);
+ if (fds.fd < 0) {
+ printf("/proc/pressure/memory open error: %s\n",
+ strerror(errno));
+ return 1;
+ }
+ fds.events = POLLPRI;
+
+ if (write(fds.fd, trig, strlen(trig) + 1) < 0) {
+ printf("/proc/pressure/memory write error: %s\n",
+ strerror(errno));
+ return 1;
+ }
+
+ printf("waiting for events...\n");
+ while (1) {
+ n = poll(&fds, 1, -1);
+ if (n < 0) {
+ printf("poll error: %s\n", strerror(errno));
+ return 1;
+ }
+ if (fds.revents & POLLERR) {
+ printf("got POLLERR, event source is gone\n");
+ return 0;
+ }
+ if (fds.revents & POLLPRI) {
+ printf("event triggered!\n");
+ } else {
+ printf("unknown event received: 0x%x\n", fds.revents);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
Cgroup2 interface
=================
@@ -71,3 +175,6 @@ mounted, pressure stall information is also tracked for tasks grouped
into cgroups. Each subdirectory in the cgroupfs mountpoint contains
cpu.pressure, memory.pressure, and io.pressure files; the format is
the same as the /proc/pressure/ files.
+
+Per-cgroup psi monitors can be specified and used the same way as
+system-wide ones.