diff options
38 files changed, 63 insertions, 64 deletions
diff --git a/Documentation/aoe/todo.txt b/Documentation/aoe/todo.txt index 7fee1e1165bc..c09dfad4aed8 100644 --- a/Documentation/aoe/todo.txt +++ b/Documentation/aoe/todo.txt @@ -7,7 +7,7 @@ not been observed, but it would be nice to eliminate any potential for deadlock under memory pressure. Because ATA over Ethernet is not fragmented by the kernel's IP code, -the destructore member of the struct sk_buff is available to the aoe +the destructor member of the struct sk_buff is available to the aoe driver. By using a mempool for allocating all but the first few sk_buffs, and by registering a destructor, we should be able to efficiently allocate sk_buffs without introducing any potential for diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index f989a9e839b4..3646a0aaea82 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -1203,6 +1203,6 @@ temporarily map a bio into the virtual address space. and Linus' comments - Jan 2001) 9.2 Discussions about kiobuf and bh design on lkml between sct, linus, alan et al - Feb-March 2001 (many of the initial thoughts that led to bio were -brought up in this discusion thread) +brought up in this discussion thread) 9.3 Discussions on mempool on lkml - Dec 2001. diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 45a738b81501..f74affe5c829 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -80,7 +80,7 @@ the /proc filesystem entry which the "block" side of the driver creates as the SCSI core may not yet be initialized (because the driver is a block driver) and attempting to register it with the SCSI core in such a case would cause a hang. This is best done via an initialization script -(typically in /etc/init.d, but could vary depending on distibution). +(typically in /etc/init.d, but could vary depending on distribution). For example: for x in /proc/driver/cciss/cciss[0-9]* diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index 2b28e9ec4e3a..b61cb9564023 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -26,7 +26,7 @@ The type of **_id is int. The type of siblings is cpumask_t. To be consistent on all architectures, the 4 attributes should have -deafult values if their values are unavailable. Below is the rule. +default values if their values are unavailable. Below is the rule. 1) physical_package_id: If cpu has no physical package id, -1 is the default value. 2) core_id: If cpu doesn't support multi-core, its core id is 0. diff --git a/Documentation/devices.txt b/Documentation/devices.txt index addc67b1d770..682e1e7018f3 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -3205,7 +3205,7 @@ for a session; this includes virtual consoles, serial ports, and pseudoterminals (PTYs). All terminal devices share a common set of capabilities known as line -diciplines; these include the common terminal line dicipline as well +disciplines; these include the common terminal line discipline as well as SLIP and PPP modes. All terminal devices are named similarly; this section explains the @@ -3285,7 +3285,7 @@ port TTY, for which no alternate device would exist. Pseudoterminals (PTYs) Pseudoterminals, or PTYs, are used to create login sessions or provide -other capabilities requiring a TTY line dicipline (including SLIP or +other capabilities requiring a TTY line discipline (including SLIP or PPP capability) to arbitrary data-generation processes. Each PTY has a master side, named /dev/pty[p-za-e][0-9a-f], and a slave side, named /dev/tty[p-za-e][0-9a-f]. The kernel arbitrates the use of PTYs by diff --git a/Documentation/fb/sstfb.txt b/Documentation/fb/sstfb.txt index f21bec8c0a25..c7088c6d5df5 100644 --- a/Documentation/fb/sstfb.txt +++ b/Documentation/fb/sstfb.txt @@ -48,12 +48,12 @@ Module Usage Module insertion: # insmod sstfb.o - you should see some strange output frome the board: + you should see some strange output from the board: a big blue square, a green and a red small squares and a vertical - white rectangle. why ? the function's name is self explanatory : + white rectangle. why? the function's name is self-explanatory: "sstfb_test()"... (if you don't have a second monitor, you'll have to plug your monitor - directely to the 2D videocard to see what you're typing) + directly to the 2D videocard to see what you're typing) # con2fb /dev/fbx /dev/ttyx bind a tty to the new frame buffer. if you already have a frame buffer driver, the voodoo fb will likely be /dev/fb1. if not, @@ -95,11 +95,11 @@ inverse=1 inverse Supposed to enable inverse console. clipping=1 clipping Enable or disable clipping. clipping=0 noclipping With clipping enabled, all offscreen - reads and writes are disgarded. + reads and writes are discarded. Default: enable clipping. gfxclk=x gfxclk:x Force graphic clock frequency (in MHz). - Be carefull with this option, it may be + Be careful with this option, it may be DANGEROUS. Default: auto 50Mhz for Voodoo 1, diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index 9afab845a906..c50bbb2d52b4 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -68,7 +68,7 @@ request for an already acquired lock will not generate another DLM call. Userspace programs are assumed to handle their own local locking. -Two levels of locks are supported - Shared Read, and Exlcusive. +Two levels of locks are supported - Shared Read, and Exclusive. Also supported is a Trylock operation. For information on the libo2dlm interface, please see o2dlm.h, diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 638cbd3d2b00..9175f44c9c64 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -390,7 +390,7 @@ stripes with parity, i.e. raid level 5, should not work, too. You have to use the "persistent-superblock 0" option for each raid-disk in the NTFS volume/stripe you are configuring in /etc/raidtab as the persistent -superblock used by the MD driver would damange the NTFS volume. +superblock used by the MD driver would damage the NTFS volume. Windows by default uses a stripe chunk size of 64k, so you probably want the "chunk-size 64k" option for each raid-disk, too. diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 89b1d196ca80..4b5ca26e5048 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -238,7 +238,7 @@ Top Level Directory Layout The sysfs directory arrangement exposes the relationship of kernel data structures. -The top level sysfs diretory looks like: +The top level sysfs directory looks like: block/ bus/ diff --git a/Documentation/hrtimers.txt b/Documentation/hrtimers.txt index 7620ff735faf..acad3a9b16c9 100644 --- a/Documentation/hrtimers.txt +++ b/Documentation/hrtimers.txt @@ -10,7 +10,7 @@ back and forth trying to integrate high-resolution and high-precision features into the existing timer framework, and after testing various such high-resolution timer implementations in practice, we came to the conclusion that the timer wheel code is fundamentally not suitable for -such an approach. We initially didnt believe this ('there must be a way +such an approach. We initially didn't believe this ('there must be a way to solve this'), and spent a considerable effort trying to integrate things into the timer wheel, but we failed. In hindsight, there are several reasons why such integration is hard/impossible: diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt index c8f99a0a9077..3feb9f2f3682 100644 --- a/Documentation/input/atarikbd.txt +++ b/Documentation/input/atarikbd.txt @@ -30,7 +30,7 @@ is obtained by ORing 0x80 with the make code. The special codes 0xF6 through 0xFF are reserved for use as follows: 0xF6 status report 0xF7 absolute mouse position record - 0xF8-0xFB relative mouse position records(lsbs determind by + 0xF8-0xFB relative mouse position records (lsbs determined by mouse button states) 0xFC time-of-day 0xFD joystick report (both sticks) diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt index 6181747a14d8..afe0d6543e09 100644 --- a/Documentation/input/cs461x.txt +++ b/Documentation/input/cs461x.txt @@ -27,7 +27,7 @@ This driver have the basic support for PCI devices only; there is no ISA or PnP ISA cards supported. AFAIK the ns558 have support for Crystal ISA and PnP ISA series. -The driver works witn ALSA drivers simultaneously. For exmple, the xracer +The driver works with ALSA drivers simultaneously. For example, the xracer uses joystick as input device and PCM device as sound output in one time. There are no sound or input collisions detected. The source code have comments about them; but I've found the joystick can be initialized diff --git a/Documentation/input/ff.txt b/Documentation/input/ff.txt index c53b1c11aa40..085eb15b45b7 100644 --- a/Documentation/input/ff.txt +++ b/Documentation/input/ff.txt @@ -38,7 +38,7 @@ joystick.txt for details. There is an utility called fftest that will allow you to test the driver. % fftest /dev/input/eventXX -3. Instructions to the developper +3. Instructions to the developer ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ All interactions are done using the event API. That is, you can use ioctl() and write() on /dev/input/eventXX. diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index ac22f636e4c2..a8aa848f8656 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -154,7 +154,7 @@ about it. 3.2 Event handlers ~~~~~~~~~~~~~~~~~~ - Event handlers distrubite the events from the devices to userland and + Event handlers distribute the events from the devices to userland and kernel, as needed. 3.2.1 keybdev diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index 949f7b5a2053..e44855513b3d 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -51,7 +51,7 @@ more complex object types. It provides a set of basic fields that almost all complex data types share. kobjects are intended to be embedded in larger data structures and replace fields they duplicate. -1.2 Defintion +1.2 Definition struct kobject { char name[KOBJ_NAME_LEN]; diff --git a/Documentation/md.txt b/Documentation/md.txt index 13aa401aed69..154b4ff9bb35 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -62,7 +62,7 @@ be reconstructed (due to no parity). For this reason, md will normally refuse to start such an array. This requires the sysadmin to take action to explicitly start the array -desipite possible corruption. This is normally done with +despite possible corruption. This is normally done with mdadm --assemble --force .... This option is not really available if the array has the root @@ -214,8 +214,8 @@ All md devices contain: safe_mode_delay When an md array has seen no write requests for a certain period of time, it will be marked as 'clean'. When another write - request arrive, the array is marked as 'dirty' before the write - commenses. This is known as 'safe_mode'. + request arrives, the array is marked as 'dirty' before the write + commences. This is known as 'safe_mode'. The 'certain period' is controlled by this file which stores the period as a number of seconds. The default is 200msec (0.200). Writing a value of 0 disables safemode. diff --git a/Documentation/networking/NAPI_HOWTO.txt b/Documentation/networking/NAPI_HOWTO.txt index 54376e8249c1..93af3e87c65b 100644 --- a/Documentation/networking/NAPI_HOWTO.txt +++ b/Documentation/networking/NAPI_HOWTO.txt @@ -35,7 +35,7 @@ Legend: packets out of the rx ring. Note from this that the lower the load the more we could clean up the rxring "Ndone" == is the converse of "Done". Note again, that the higher -the load the more times we couldnt clean up the rxring. +the load the more times we couldn't clean up the rxring. Observe that: when the NIC receives 890Kpackets/sec only 17 rx interrupts are generated. diff --git a/Documentation/networking/gen_stats.txt b/Documentation/networking/gen_stats.txt index c3297f79c137..ae54c828f4d6 100644 --- a/Documentation/networking/gen_stats.txt +++ b/Documentation/networking/gen_stats.txt @@ -103,8 +103,8 @@ In the kernel when setting up: else failed -From now on, everytime you dump my_rate_est_stats it will contain -uptodate info. +From now on, every time you dump my_rate_est_stats it will contain +up-to-date info. Once you are done, call gen_kill_estimator(my_basicstats, my_rate_est_stats) Make sure that my_basicstats and my_rate_est_stats diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index c2f859f7f2f0..287b6227f1e9 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -147,7 +147,7 @@ Examples: Example scripts =============== -A collection of small tutorial scripts for pktgen is in expamples dir. +A collection of small tutorial scripts for pktgen is in examples dir. pktgen.conf-1-1 # 1 CPU 1 dev pktgen.conf-1-2 # 1 CPU 2 dev diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt index c96897aa08b6..3e549fc90f91 100644 --- a/Documentation/networking/wan-router.txt +++ b/Documentation/networking/wan-router.txt @@ -570,7 +570,7 @@ bata1-2.2.1 Feb 09 2001 Option to COMPILE WANPIPE modules against the currently running kernel, thus no need for manual kernel and module - re-compilatin. + re-compilation. o Updates and Bug Fixes to wancfg utility. diff --git a/Documentation/nfsroot.txt b/Documentation/nfsroot.txt index 3cc953cb288f..719f9a9d60c0 100644 --- a/Documentation/nfsroot.txt +++ b/Documentation/nfsroot.txt @@ -11,7 +11,7 @@ Updated 2006 by Horms <horms@verge.net.au> In order to use a diskless system, such as an X-terminal or printer server for example, it is necessary for the root filesystem to be present on a non-disk device. This may be an initramfs (see Documentation/filesystems/ -ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a +ramfs-rootfs-initramfs.txt), a ramdisk (see Documentation/initrd.txt) or a filesystem mounted via NFS. The following text describes on how to use NFS for the root filesystem. For the rest of this text 'client' means the diskless system, and 'server' means the NFS server. diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index 73fc87e5dc38..24edf25b3bb7 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -326,7 +326,7 @@ A reference implementation This is a typical implementation. Drivers can slightly change the order of the operations in the implementation, ignore some operations or add -more deriver specific operations in it, but drivers should do something like +more driver specific operations in it, but drivers should do something like this on the whole. 5. Resources diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index e80e03637a67..bfcd95dd3c36 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -335,7 +335,7 @@ struct boot_param_header { "compact" format for the tree itself that is however not backward compatible. You should always generate a structure of the highest version defined at the time of your implementation. Currently - that is version 16, unless you explicitely aim at being backward + that is version 16, unless you explicitly aim at being backward compatible. - last_comp_version diff --git a/Documentation/rocket.txt b/Documentation/rocket.txt index a10678004451..2d11ad6e525a 100644 --- a/Documentation/rocket.txt +++ b/Documentation/rocket.txt @@ -107,7 +107,7 @@ second, third, and fourth Rocketport cards (if present) are set via software control. The DIP switch settings for the I/O address must be set to the value of the first Rocketport cards. -In order to destinguish each of the card from the others, each card +In order to distinguish each of the card from the others, each card must have a unique board ID set on the dip switches. The first Rocketport board must be set with the DIP switches corresponding to the first board, the second board must be set with the DIP switches @@ -120,7 +120,7 @@ conflict with any other cards in the system, including other RocketPort cards. Below, you will find a list of commonly used I/O address ranges which may be in use by other devices in your system. On a Linux system, "cat /proc/ioports" will also be helpful in -identifying what I/O addresses are being used by devics on your +identifying what I/O addresses are being used by devices on your system. Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index a6555dbfa081..ffb74a1656e6 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -8,8 +8,8 @@ Overview of Document: ===================== This document is intended to give an good overview of how to debug -Linux for s/390 & z/Architecture it isn't intended as a complete reference & not a -tutorial on the fundamentals of C & assembly, it dosen't go into +Linux for s/390 & z/Architecture. It isn't intended as a complete reference & not a +tutorial on the fundamentals of C & assembly. It doesn't go into 390 IO in any detail. It is intended to complement the documents in the reference section below & any other worthwhile references you get. @@ -354,7 +354,7 @@ static inline struct task_struct * get_current(void) } i.e. just anding the current kernel stack pointer with the mask -8192. -Thankfully because Linux dosen't have support for nested IO interrupts +Thankfully because Linux doesn't have support for nested IO interrupts & our devices have large buffers can survive interrupts being shut for short amounts of time we don't need a separate stack for interrupts. @@ -394,7 +394,7 @@ i.e they aren't in registers & they aren't static. back-chain: This is a pointer to the stack pointer before entering a framed functions ( see frameless function ) prologue got by -deferencing the address of the current stack pointer, +dereferencing the address of the current stack pointer, i.e. got by accessing the 32 bit value at the stack pointers current location. @@ -724,7 +724,7 @@ This is useful for debugging because 1) You can double check whether the files you expect to be included are the ones that are being included ( e.g. double check that you aren't going to the i386 asm directory ). 2) Check that macro definitions aren't clashing with typedefs, -3) Check that definitons aren't being used before they are being included. +3) Check that definitions aren't being used before they are being included. 4) Helps put the line emitting the error under the microscope if it contains macros. For convenience the Linux kernel's makefile will do preprocessing automatically for you @@ -840,12 +840,11 @@ using the strip command to make it a more reasonable size to boot it. A source/assembly mixed dump of the kernel can be done with the line objdump --source vmlinux > vmlinux.lst -Also if the file isn't compiled -g this will output as much debugging information -as it can ( e.g. function names ), however, this is very slow as it spends lots -of time searching for debugging info, the following self explanitory line should be used -instead if the code isn't compiled -g. +Also, if the file isn't compiled -g, this will output as much debugging information +as it can (e.g. function names). This is very slow as it spends lots +of time searching for debugging info. The following self explanatory line should be used +instead if the code isn't compiled -g, as it is much faster: objdump --disassemble-all --syms vmlinux > vmlinux.lst -as it is much faster As hard drive space is valuble most of us use the following approach. 1) Look at the emitted psw on the console to find the crash address in the kernel. @@ -1674,8 +1673,8 @@ channel is idle & the second for device end ( secondary status ) sometimes you g concurrently, you check how the IO went on by issuing a TEST SUBCHANNEL at each interrupt, from which you receive an Interruption response block (IRB). If you get channel & device end status in the IRB without channel checks etc. your IO probably went okay. If you didn't you -probably need a doctorto examine the IRB & extended status word etc. -If an error occurs more sophistocated control units have a facitity known as +probably need a doctor to examine the IRB & extended status word etc. +If an error occurs, more sophistocated control units have a facitity known as concurrent sense this means that if an error occurs Extended sense information will be presented in the Extended status word in the IRB if not you have to issue a subsequent SENSE CCW command after the test subchannel. @@ -1916,7 +1915,7 @@ Assembly -------- info registers: displays registers other than floating point. info all-registers: displays floating points as well. -disassemble: dissassembles +disassemble: disassembles e.g. disassemble without parameters will disassemble the current function disassemble $pc $pc+10 @@ -1935,7 +1934,7 @@ undisplay : undo's display's info breakpoints: shows all current breakpoints -info stack: shows stack back trace ( if this dosent work too well, I'll show you the +info stack: shows stack back trace ( if this doesn't work too well, I'll show you the stacktrace by hand below ). info locals: displays local variables. diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index 079d8868ae83..3746b6d7b4ba 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -433,7 +433,7 @@ puts the CPU into I/O disabled state by preserving the current PSW flags. The device driver is allowed to issue the next ccw_device_start() call from within its interrupt handler already. It is not required to schedule a -bottom-half, unless an non deterministicly long running error recovery procedure +bottom-half, unless an non deterministically long running error recovery procedure or similar needs to be scheduled. During I/O processing the Linux/390 generic I/O device driver support has already obtained the IRQ lock, i.e. the handler must not try to obtain it again when calling ccw_device_start() or we end in a diff --git a/Documentation/s390/s390dbf.txt b/Documentation/s390/s390dbf.txt index e321a8ed2a2d..5ff6fe551b93 100644 --- a/Documentation/s390/s390dbf.txt +++ b/Documentation/s390/s390dbf.txt @@ -468,7 +468,7 @@ The hex_ascii view shows the data field in hex and ascii representation The raw view returns a bytestream as the debug areas are stored in memory. The sprintf view formats the debug entries in the same way as the sprintf -function would do. The sprintf event/expection functions write to the +function would do. The sprintf event/exception functions write to the debug entry a pointer to the format string (size = sizeof(long)) and for each vararg a long value. So e.g. for a debug entry with a format string plus two varargs one would need to allocate a (3 * sizeof(long)) diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index fb9281ae8faa..e80a02cffb22 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -96,10 +96,10 @@ The original driver has been written for 386bsd and FreeBSD by: It is now available as a bundle of 2 drivers: - ncr53c8xx generic driver that supports all the SYM53C8XX family including - the ealiest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and + the earliest 810 rev. 1, the latest 896 (2 channel LVD SCSI controller) and the new 895A (1 channel LVD SCSI controller). - sym53c8xx enhanced driver (a.k.a. 896 drivers) that drops support of oldest - chips in order to gain advantage of new features, as LOAD/STORE intructions + chips in order to gain advantage of new features, as LOAD/STORE instructions available since the 810A and hardware phase mismatch available with the 896 and the 895A. @@ -207,7 +207,7 @@ The 896 and the 895A allows handling of the phase mismatch context from SCRIPTS (avoids the phase mismatch interrupt that stops the SCSI processor until the C code has saved the context of the transfer). Implementing this without using LOAD/STORE instructions would be painfull -and I did'nt even want to try it. +and I didn't even want to try it. The 896 chip supports 64 bit PCI transactions and addressing, while the 895A supports 32 bit PCI transactions and 64 bit addressing. diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index ce767b90bb0d..8d6253f9cb32 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -160,7 +160,7 @@ ways. - Fine-grained EH callbacks LLDD can implement fine-grained EH callbacks and let SCSI midlayer drive error handling and call appropriate callbacks. - This will be dicussed further in [2-1]. + This will be discussed further in [2-1]. - eh_strategy_handler() callback This is one big callback which should perform whole error diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index 2bf3cfa3a067..8b2168aa4fc7 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -381,7 +381,7 @@ Please see http://www.garloff.de/kurt/linux/dc390/problems.html replaced by the dev index of your scanner). You may try to reset your SCSI bus afterwards (echo "RESET" >/proc/scsi/tmscsim/?). The problem seems to be solved as of 2.0d18, thanks to Andreas Rick. -* If there is a valid partition table, the driver will use it for determing +* If there is a valid partition table, the driver will use it for determining the mapping. If there's none, a reasonable mapping (Symbios-like) will be assumed. Other operating systems may not like this mapping, though it's consistent with the BIOS' behaviour. Old DC390 drivers ignored the diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 958ccf3aa2ea..4fbf8d5d4e73 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1263,8 +1263,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Note: on some notebooks the buffer address cannot be detected automatically, or causes hang-up during initialization. - In such a case, specify the buffer top address explicity via - buffer_top option. + In such a case, specify the buffer top address explicitly via + the buffer_top option. For example, Sony F250: buffer_top=0x25a800 Sony F270: buffer_top=0x272800 diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt index b535c2a198f8..e40cce83327c 100644 --- a/Documentation/sound/alsa/Audiophile-Usb.txt +++ b/Documentation/sound/alsa/Audiophile-Usb.txt @@ -126,7 +126,7 @@ Here is a list of supported device_setup values for this device: - Alsa driver default mode - maintains backward compatibility with setups that do not use this parameter by not introducing any change - - results sometimes in corrupted sound as decribed earlier + - results sometimes in corrupted sound as described earlier * device_setup=0x01 - 16bits 48kHz mode with Di disabled - Ai,Ao,Do c |