summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/phy/phy-miphy365x.txt8
-rw-r--r--arch/arm/boot/dts/stih416.dtsi4
-rw-r--r--drivers/phy/phy-miphy365x.c14
-rw-r--r--include/dt-bindings/phy/phy-miphy365x.h14
4 files changed, 13 insertions, 27 deletions
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
index 9802d5d911aa..8772900e056a 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
@@ -20,8 +20,8 @@ Required nodes : A sub-node is required for each channel the controller
Required properties (port (child) node):
- #phy-cells : Should be 1 (See second example)
Cell after port phandle is device type from:
- - MIPHY_TYPE_SATA
- - MIPHY_TYPE_PCI
+ - PHY_TYPE_SATA
+ - PHY_TYPE_PCI
- reg : Address and length of register sets for each device in
"reg-names"
- reg-names : The names of the register addresses corresponding to the
@@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type.
Example:
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
sata0: sata@fe380000 {
...
- phys = <&phy_port0 MIPHY_TYPE_SATA>;
+ phys = <&phy_port0 PHY_TYPE_SATA>;
...
};
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index ea28ebadab1a..eeb7afecbbe6 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -10,7 +10,7 @@
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
@@ -306,7 +306,7 @@
reg = <0xfe380000 0x1000>;
interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
interrupt-names = "hostc";
- phys = <&phy_port0 MIPHY_TYPE_SATA>;
+ phys = <&phy_port0 PHY_TYPE_SATA>;
phy-names = "sata-phy";
resets = <&powerdown STIH416_SATA0_POWERDOWN>,
<&softreset STIH416_SATA0_SOFTRESET>;
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
index 6c80154e8bff..98bffbc0f74d 100644
--- a/drivers/phy/phy-miphy365x.c
+++ b/drivers/phy/phy-miphy365x.c
@@ -25,7 +25,7 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
-#include <dt-bindings/phy/phy-miphy365x.h>
+#include <dt-bindings/phy/phy.h>
#define HFC_TIMEOUT 100
@@ -176,7 +176,7 @@ static u8 rx_tx_spd[] = {
static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
struct miphy365x_dev *miphy_dev)
{
- bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
+ bool sata = (miphy_phy->type == PHY_TYPE_SATA);
return regmap_update_bits(miphy_dev->regmap,
miphy_phy->ctrlreg,
@@ -430,7 +430,7 @@ static int miphy365x_init(struct phy *phy)
}
/* Initialise Miphy for PCIe or SATA */
- if (miphy_phy->type == MIPHY_TYPE_PCIE)
+ if (miphy_phy->type == PHY_TYPE_PCIE)
ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
else
ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
@@ -454,8 +454,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
return ret;
}
- if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
- (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
+ if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
+ (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
return 0;
miphy_phy->base = of_iomap(phynode, index);
@@ -498,8 +498,8 @@ static struct phy *miphy365x_xlate(struct device *dev,
miphy_phy->type = args->args[0];
- if (!(miphy_phy->type == MIPHY_TYPE_SATA ||
- miphy_phy->type == MIPHY_TYPE_PCIE)) {
+ if (!(miphy_phy->type == PHY_TYPE_SATA ||
+ miphy_phy->type == PHY_TYPE_PCIE)) {
dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
return ERR_PTR(-EINVAL);
}
diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
deleted file mode 100644
index 8ef8aba6edd6..000000000000
--- a/include/dt-bindings/phy/phy-miphy365x.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * This header provides constants for the phy framework
- * based on the STMicroelectronics MiPHY365x.
- *
- * Author: Lee Jones <lee.jones@linaro.org>
- */
-#ifndef _DT_BINDINGS_PHY_MIPHY
-#define _DT_BINDINGS_PHY_MIPHY
-
-#define MIPHY_TYPE_SATA 1
-#define MIPHY_TYPE_PCIE 2
-#define MIPHY_TYPE_USB 3
-
-#endif /* _DT_BINDINGS_PHY_MIPHY */